21:50 Getting those nuts on that green pad were the hardest part…. Mine rubs up against the wing. I’ve installed the arm on both sides and just scrapes. I’m stuck on this model, not something for beginners. Beginners need pictures. This model documents the easy parts, nothing for the hard parts. I wish I could return :( I wish I could see a close up, but noting on KZread, no instructions. I guess I could cut in the wing lol

@blueskyfpv

7 ай бұрын

Hey, Thanks for taking the time to leave a comment and questions. Sorry to hear you're having some trouble getting the wing set up. The instructions with this model are NOT great. I know exactly what you mean about those stupid little nuts - they made me crazy. I eventually found a very small socket wrench (5/32" I think), and that helped a lot. Also, when I was building my second AR wing pro (I destroyed the one in the videos), I twisted the servo rod all the way into the connector on the servo horn. Then, I only needed to undo the connector on the aileron to make the adjustments. Another issue could be if you didn't centre the servo before attaching the servo arm. If it isn't properly centre, the servo arm will go more 1 direction than the other. I hope this helps a bit. If you have more questions, just ask. I'll try my best to help out. Its a fun plane to fly...you need to get it in the air.

@user-otzlixr

7 ай бұрын

@@blueskyfpvVery Helpful thank you! I had the nut/screw/rod in the wrong order. I also had very flexible ailerons. Stiffing the ailerons with some more carbon helped. After that, I needed to recenter the servo, and everything is perfect now. Thanks for your videos and comments.

You must be a fly tier also!

@blueskyfpv

3 ай бұрын

Yep. Coming on 30 years now.