Arturia Keystep 32 Tutorial | How to Use the Sequencer & More
Музыка
Straightforward tutorial on the Arturia KeyStep 32. All information to start using KeyStep at full potential in one video.
🔗 Manual for the KeyStep 32: www.roland.com/global/support...
🔗 Midi Control Center and firmware updates: www.arturia.com/products/keys...
☕ Buy me a coffee: www.buymeacoffee.com/tuulacult
📕 Chapters:
0:00 Intro
0:29 PART 1 - KeyStep for computer
2:04 PART 2 - KeyStep for hardware setup
4:19 PART 3 - General functions
6:45 PART 4 - Arpeggiator
8:38 PART 5 - Sequencer
12:26 PART 6 - Midi Control Center
14:59 Outro
🔗 My Links:
Instagram: / tuulacult
Spotify: open.spotify.com/artist/1GCN9...
Soundcloud: / tuulacult
Apple Music / artist .
Пікірлер: 25
i've had the keystep for like a year and a half and never cared to learn more about it, thought i wouldn't be able to figure it out; thanks for the video, it's been really useful!
@Tuulacult
11 ай бұрын
Glad it helped you!
@djordjedrobnjak333
6 ай бұрын
same with all my gear :'D
The robots are coming for us... just as soon as they learn how to pronounce MIDI 😂
@ParadiseVibe
9 ай бұрын
Ha! Correct, they must pass the Meady test. We need a T-shirt with pic-art of a MIDI plug head-on, like a smiley face, the pins are it's toothy smile - 'Say MIDI' is printed underneath.
@rreeppeeaatteerr
9 ай бұрын
LOL i like that. we could do another one that says "how's your prosody?"
omg this channel is such a gold mine. Everything is straight to the point. Subscribed!!
This is very useful, thanks! I followed your instructions and connect the appropriate cables, but I'm not able to make it work. Can you tell me what are the Sync source settings you used? I believe this would be set to "Interface"?
How do you erase a sequence?
I like that you demo on hardcore/gabber sound ;-)
Is there a way to change the midi channel the Arthuria keystep is playing on from a remote midi device? And how …
Thanks and it’s really helpful for a beginner like me! I have one question: if we connect keystep to two synths with 2 midi. When I start sequence the sound goes through both, right? Then depending on the play keyboard channel the live notes will only go through 1 synth?
@karlderdelinckx
4 ай бұрын
No. The keystep plays all the synths that are on the chosen midi channel. So if you’re synths are both set to midi channel 1 they’ll play together. If they are set to midi channel 1 and 2 they’ll play respectively when you put the Arthuria to that midi channel. If you press play the sequencers of you’re synths will play. So the sequences stored in Both devices. If you press kbd play those sequences will keep on playing and you’ll play on the synth which channel is chosen on the keystep.
What happens If I decide to use midi in out or through not using PC computer ???
All sold your firm were page. Link is not working.
The meedeee sea quen sir mode
I need help, PLEASE I can not get the KEystep to respond to the Roland, aira Campact S-1 I have tried almost every combination I can think of ,and still nothing, I even bought a Type A and a TypeB Midi connecter. PLease help Thanks !
@teemunnee
6 ай бұрын
Hey I know this is 3 months old, and you have likely found a solution, but figured I'd throw on here that the S1 is automatically set to midi channel 3. If you set the Keystep to that, you should be set. Worked great for me.
@bman6676
2 ай бұрын
@@teemunnee I was going to say that. Good pickup. 🤗
Thanks for the video, although the AI-voice gets grating to my ears fast
@musicartgeek
5 ай бұрын
Painful - “Meedee cable”
@Alkatross
Ай бұрын
This one is hilarious, kEEstp thirtytwo. SEEquencer. Meedi cable for DA
What in the hell is a Me Dee?
Do you speak english? Wtf