I like this video for its content, presentation and the quality of the picture/sound. Great piece of work in online education. Gratefully appreciated....Thanks.

Did he really have to say some variation of "improving your pipetting technique will improve your results" before giving each tip?!

This was fabulous, thank you.

Great! I was looking for this kind of video! I love you! It's perfect!

Thank you a million times.

Useful tips, thank you!!!!

Highly useful tips. Thank you so much

Thank you so much!

Its a good wholesome video. Good to take two vials for practicing pippetting from one vial to another. The veritcak smooth plunging asoursying and dispensing. Repeatedly. It takes 1-3 months yo get used to get the skill to settle in your innner being. Using calibration and weinging machince pipetting can be checked. Maybe will edit this after sometime ~ on calbration.

Great info sir thx

can i get that "take home massage" one more time ...thanks!

Great

the eppendorf electronic 12-ganga and 8-gang pipette can accommodate 200-uL and 300-uL tips. can i use 200-uL tips when working with smaller volumes? or is it explicitly forbidden?

IN SOME VIDEO SAYS PRE WETTING THE TIPS DEPENDS ON SOP BUT NOT ALL

tip #1. In my last employment, they never pre-wet tips. i was the only one who did. my results were higher than the rest of the group. i was reprimanded for not following sop.

When you release the Liquid do you go directly to the 2nd stop

@ridwansalifu6987

Жыл бұрын

Deliver with the first stop and blow the remaining liquid out completely with the second stop.

Does pre-rinse and pre-wet means the same thing?

@ARTEL10Tips

3 жыл бұрын

Thank you for watching the 10 tips video series and for your question. Traditionally, the terms pre-rinsing and pre-wetting refer to the same process however in practice, we have observed them to be quite different. Below I’ve outlined the steps to illustrate the technique differences, which primarily center around removing the tip from the sample solution. Pre-Rinsing: press the plunger to first stop, place the pipette tip in sample solution, leave the tip in the sample solution and exercise plunger up and down several times. Pre-Wetting: press the plunger to first stop, place the pipette tip in sample solution, aspirate sample, remove tip from sample solution, press plunger to second stop to fully dispense sample against side of receptacle. Repeat steps at least 3 times. I hope this information is helpful. Thank you again for reaching out.

@SH-fz5pt

3 жыл бұрын

@@ARTEL10Tips Thank you for taking the time to answer my question!

@ARTEL10Tips

3 жыл бұрын

@@SH-fz5pt You are welcome. We thought you might find these additional resources helpful; ten tips to improve your pipetting technique www.artel.co/learning_center/10-tips-to-improve-your-pipetting-technique/ and pipetting viscous solutions best practices www.artel.co/learning_center/pipetting-viscous-solutions/.

How to

never got teached to pre-wet the pipette!

500th like!