Thanks for taking the time to post this video! It helps interpreting the directions. I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply. If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.

Thanks for the video. My son and I are nearly done with our 6' x 8' shed (we have a small backyard in San Francisco.) I used your video for reference.

Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on). The instructions suck, so this video was my salvation. Thank you!

I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install. Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.

@jackfrosty4674

2 жыл бұрын

It takes most 2 weeks.

@TheLetsPlayCommunity

Жыл бұрын

Haha

@ronniehossain7500

3 ай бұрын

@@jackfrosty4674 I can build wooden shed faster and cheaper.

Must have been loads of pollen 😂 we counted all the sniffs. Great video and very helpful thank you!

@George-zr3vn

19 сағат бұрын

Yeah. Pollen

Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base

@christopherschertner499

2 жыл бұрын

How did you build the wooden base?

@LizardBoxingClub

2 жыл бұрын

@@christopherschertner499 get some pallets people give away for free then just throw some plywood on top

@alex81815

Жыл бұрын

How big does the foundation need to be ? Exactly 8x10 or slightly bigger

Y'all crushed this!! Thank you so much for this fantastic video. Like may others, I would not have been able to complete this shed w/o this video...

OUTSTANDING VIDEO!!! You made the build of my shed much easier and saved me allot of time!! Thank You!!!

Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!

@aidensandoval1164

3 жыл бұрын

What have you done so far ?

@FernandoRodriguez-ds5ri

2 жыл бұрын

How did it turned out

@jackfrosty4674

2 жыл бұрын

longer screws before start. Go buy screws 1/4 inch longer for ease.

@angieroyal6858

2 ай бұрын

9:47

I have one of these sheds in my back yard that is ready to be replaced, but we've had it well over 30 years.

@grimsonforce7504

3 жыл бұрын

30 years??? Seriously? I was hoping for 5 years.

@markrhuett

3 жыл бұрын

I too just took down my old metal shed of about 35 years..just purchased another but a little smaller size...

@grimsonforce7504

3 жыл бұрын

@@markrhuett Thanks this just confirmed my purchase in these sheds. That's incredible.

@BloodyKnives66

3 жыл бұрын

Tornado took the last one I had, it grabbed it and tossed it who knows where? never saw it again.

@lar4305

3 жыл бұрын

@@grimsonforce7504 I have one that is 20yo and all i did was paint it so far. still in good shape.

My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !

Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions

@nailtalkwithdomo4630

3 жыл бұрын

Do you know how to makes the doors stop making squeaky noise

I don’t think I would’ve been able to complete this build without your video

I've been a builder for many years and have seen quite a fair bit of sheds. The plans in ryan's package kzread.infoUgkxB7IXYxLzb_Ichhe45zM3Im5xfEiSp9vB have some of the nicest looking sheds i've seen in a while.

Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.

That’s an upcoming project for me. It was great watching it get done ahead of time!

Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!

Thank you I find this very helpful as it is the same shed I'm building!

Awesome video. It helped me a lot. I'm mostly done. Gotta do the roof tomorrow

Thanks for this up and beyond video 👍 appreciate you doing all the work showing how it's done 👍👏 gracias señor 🍻

Man brother thank you.....if it wasent for your great video i would have never finish....thanks a million

Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆

Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.

@artepzerimar9916

3 жыл бұрын

I was wondering whats cheaper the concrete or the treated wood 🤔 do you know???

@Mark300win

2 жыл бұрын

What did you used the plywood sheets for?

@ashleyharrington

2 жыл бұрын

Where did you purchase yours from?

@LizardBoxingClub

2 жыл бұрын

@@Mark300win floor

Thanks I am actually working on one right now.

Omg thank you for this video, i loooove KZread for videos like these😁

You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now

Even my shed is 8x6 this video helped me a lot. thank you very much.

I hate the bad diagrams on the instructions guide, very helpful this video.

@Austin.D

3 жыл бұрын

ikr the instructions weren't really that helpfully Lol

@cc.s.l5134

2 жыл бұрын

Worst video

Paid 99$ this video may have saved me and my sanity Thank you

@pono_ouiji

3 жыл бұрын

what?! was going to say it's $500 where I'm @ damn

I'm so happy I found this video! It's exactly what I was looking for before I started assembling. Y'all are very detailed and clear. Thank you!

Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.

I have followed your video while looking at the instructions. Life saver and lots of irritation. Thanks

Thanks for this video. I’m using it as I do each step/page in the book

Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend

@justinbates3264

Жыл бұрын

Just got to the price and damn inflation is a bitch

The best shed installation video,great video well explained.

It looks good, now realizing it’s not what will work for me but glad I figured it out before buying so thankyou

You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.

@whathandleUtalkabt

10 ай бұрын

He gets monthly ad revenue from KZread for the commercials you watch on his channel.

Great video helped me out alot. Thanks Toasty

I'm bout to start mines.. I watched your video first.. you did a great job.. thanks.. wish me luck..

Wow this video is amazing! Thank you!

Hey brother, I’ve watched this video like 10 times and I’m stuck on step 5. I don’t know how to correctly assemble the side wall frames. What do I do with the 2 channels & 2 angled pieces to connect them to the front & back frame?

Thanks for the video. I just wanted to comment for anyone else it took us, two people, a total of 7 hours from start to finish. No way you can do this alone.

Very helpful video,thank you. AND that was a bad ass VANS hoodie! 🤗

I have to assemble one of these for a client tomorrow. Thank for this video

I listened and not watched ..video still helped ..for moral fortitude

YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!

@nowhereman7398

2 жыл бұрын

That's what I'm doing right now. Been a lot easier to buy a new shed.

Would it be OK if I use self tappers from the inside out? Since I have no space on the side or back due to walls being on the way. Is it possible?

BEST VIDEO ABOUT

MAN! BIG ONE HUNDRED ON YOUR VIDEO! Extremely Helpful! BY FAR THE BEST ONE FOR THESE SHEDS⭐️⭐️⭐️⭐️⭐️✌🏾

Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post KZread videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and God Bless. Chazz

@GledysCoromotoValladares

3 жыл бұрын

Nice video content! Sorry for the intrusion, I would appreciate your initial thoughts. Have you heard about - Mahorrla Wooden Paradise Method (just google it)? It is a good one of a kind product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my buddy at last got cool results with it. 👍😎

@Jungla694

2 жыл бұрын

Maybe some are turned off my the sniffling and snot swallowing of the narrator?

Great job bro 👍🛠🔧⚒

Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.

we had trouble figuring out the sliding door track, which of course you guys skipped. Anyway it was helpful

Thanks. Best shed assembly video I've watched. It should really help when mine arrives later this week 👍

@jackfrosty4674

2 жыл бұрын

make sure spot level. Level and square so screws line up.

Thanks bro a lot easier than reading the dame instructions 😆

I got one of these from a discount shop. Instructions totally in French lol thanks for this video

We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!

They now sell for $700 wow thats a price increase

@X1xmOOSex1X

8 ай бұрын

Got one similar and same size from Walmart for 350

@biz1boom

5 ай бұрын

Let's Go Brandon!

@dustyhess9967

4 ай бұрын

I found one on Facebook for $100 I just picked up!

@williamharris7577

4 ай бұрын

The Rubbermaid plastic ones are pushing $1600 in Canada🤢

@MrRaqizy

2 ай бұрын

Theyre $399 now at lowes lol

Excellent video!!! Thank you!

I used spray foam on mine after I assembled it worked really good

@BobOsbelt-vw7us

6 ай бұрын

Spray foam where,any pics?

Thanks for making this video! Great work very clear teaching.

Awesome video, helps a lot. Thanks.

Nicely done Toasty DIY. This video was s huge help. Thanks for sharing..

Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner

@ToastyDIY

3 жыл бұрын

Sony Vegas Pro is what I use but Premier Pro would work well too

Great info just bought the 12x12 this will really help with assembly

This shed has been a b**** lol finally putting roofing on the instructions that came with it bunch hogwash. Thank you for ur video it helped so much!!

good job I like how you explain ..

Thanks for the video. I think instead of swinging the camera around showing the completed parts, maybe an overhead, stationary view would help. Most of us are pausing the video several times to keep up.

Great video depicted well

Hey my corner panels are to long after bolting in all the holes told to and the roof panels are a little to short at the top but fine at the bottom, anybody know why

Very helpful, Thank you!

Can this boy fit under a deck easily, or would it be impossible to bolt in the top screws for the roof? Thanks

By far this is the best video I have found for this shed. Thank you so much for posting!

Nice job I had problem wit the roof 1 panel came more bigger 32 and the other?

Good video for installed the door, I don't understand the manual. Thanks.

Awesome video, very detailed

I'm just curious as to how you were able to reach the bolts that tie the panels together at their highest point near the center. I'm of normal height and don't see how I'll be able to reach.

@ToastyDIY

3 жыл бұрын

I may have used a step ladder? It's been a few months so not sure. I did have a friend helping so it's possible he was on the outside holding something.

I saw a warped roof panel in the middle of the roof. Do roof panels not always line up?

Thank you for the video it was very helpful ❤️

Do i need to ground my metal shed? i noticed more lightning strikes in the yard. My metal shed does sit on a wooden base with 5x5 flag stone at each corner. Any advice to appreciated.

I would put a rubber gasket and use caulk to seal the floor base to the deck or concrete to keep water from coming in the base . i did that with my older arrow shed but want to buy a new one for the odds and ends stuff

Thank you for the help

Thank u it was very helpful!!!

Anchoring is key. And after many years when the base has rusted again it's time to replace or repair. I had an older version at my rental take flight during a storm a few months ago.

@ghlewis

Жыл бұрын

Good to know about anchoring. Had the same problem with the old shed my FIL had installed

how long do it take to put the shed together

Thank you.

I see that you put this shed up a couple years ago. How is the roof holding up. I am going to put on up. I am in northern Wisconsin where we get a good amount of snow. I will be putting some extra support. Great job explaining how to assemble. Thank you!!!

I had this same shed delivered last week but I can't get 3 rainless days to assemble it until May 18. I'm doing it myself so it might take that long, not sure. Got the floor frame & anchors too. Anyway good info here, I know more of what's involved now.

@ToastyDIY

4 жыл бұрын

Glad we could help! If doing by yourself, the worst part will be the walls. The less wind the better and if you have anything to hold up/ put behind the walls temporarily just in case as well.

Great job bro 👏

My wife and I have been putting this together for two days and we are just now putting the walls up. We noticed they did not put the holes in the right place so I drilled some of my own. Have you had that problem?

@RandallGove

3 жыл бұрын

So we were wrong. We put the walls in the wrong place and it threw us off. We finished the whole thing after a month.l

@dangnhahuong4092

3 жыл бұрын

interesting points ,if anyone else trying to find out backyard storage sheds plans try *WoodBlueprints. Com* Ive heard some decent things about it and my colleague got cool success with it.

Perfect video , looking to buy one today

Appreciate the video

I needed step 7 the most but you flew through it

Thank you so much!! We had the corner pieces on backwards and were losing our damn minds.

Awesome video! Thank you for doing it. Just finished day one (quit the same time you did) Will finish roof and doors tomorrow. I didn't think I would be able to do this until I saw your video and I am pretty sure its going to be great! I've seen reviews where people claim to do this by themselves. I was going to try but I don't think that is possible. Lucky I had a helper for steps 8 and beyond. The insulation tape on the gables baffled me. Question. Did you do any caulking after the install or even any of that gap filler stuff? THANK YOU! Great Job!

@chrishayes5755

2 жыл бұрын

sawhorse with a 2x4 can hold up the walls, I'm doing it as 1 person. only issue is carrying the front panel with the 2 doors.

Thanks for the heads up but I got dizzy trying to keep up with your camera..

I was able to complete mine by myself using neodymium magnets and self tapping screws where things wouldn't line up. Turned out great!

Best explaining how to install compared to onther realated ones no doubt😃😄😃😃

Thank you so much , best assembly video ever (not just shed assembly video but best assembly video ever)). I absolutely subscribed right away and so should everybody else

I'm going to do exactly what is done on these videos👍👍👍