This was super helpful. I just got a brand new second hand spektrum esc with the grey top and was struggling to program it. It turns out the settings on this esc are different to the older esc

@UDRC85

Ай бұрын

I’m glad it was able to help you. Thank you for the comment and subscribing. Enjoy your new rig brother.

FKN finally… you sir are appreciated 😅

Thanks for the info 👍🏾 The double A batteries, hope them rechargeable. I won't want to be throwing away batteries that look so good with logo Arrma on it. That is just me saying, love Arrma

I update my box and it still don’t work on my out cast I think it’s the new programming system arrma decided to put in. Still not sure why I can’t use my programmer so I had to do it manually. Thanks for the video 👍🏽

This tech should have been all blue tooth so the user can use a smart phone app or a PC. I'm not touching this on my new EXB V2 until they announce a more user friendly format or eliminate the update issue.

My esc keeps flashing red when I cut it on. I'm always left with having to recalibrate and then I'm good to go. Any reason why it does that?

were you able to figure out the update software request? by the way nice looking rig 👊🏼👊🏼

@UDRC85

10 ай бұрын

I have not looked into it yet but I will look into it.

@bryantut1609

8 ай бұрын

I have the same issue with my Outcast 8s V2, I emailed support and they are aware of the issue but no ETA of when it will be addressed.

@fabster32

7 ай бұрын

kzread.info/dash/bejne/ZIWelbJsftWzfZs.htmlsi=bN3jyOljljV6e4qf

@T_DoGo

7 ай бұрын

dam thankyou for the info@@bryantut1609

I just picked up an arrma Kraton 8s and in my opinion it's a bit slow. I also have a losi dbxl-e that absolutely rips compared to the Kraton. Punch level is maxed out. Any ideas what the issue could be?

My program card said the same thing on this esc and it’s got the current update. I can not figure it out. Yours is current to 1.0.10

@T_DoGo

7 ай бұрын

im having the same problem with my outcast 8s v2 my update is same cant update a newer version and still same message

have same problem with my outcast 8s v2 with the programmer, please post solution if you find one.

Did you also notice the 11th setting that’s not specified in the manual. Not sure what it is.

@jcanvid

2 ай бұрын

I have the same question lol.

Mine wont calibrate. Ido the steps but it doesnt beep or flash. Just stays beeping flashing red until I hit the set button then nothing

you didn't need to open up the radio box and do a bind with the receiver ?

And that's why I don't use the program card for my spectrum 150amp esc.

Great video. Yeah I'm gonna keep mine on all factory setting when I get it. How do you like those cheap Hoovo batteries? I think they are the worst inhad issues with them twice. You won't get the full power of that kraton with those batteries. SMC and gens ace bashers are best. 👍👊

@user-ig1tt1jq9n

5 ай бұрын

I got mine I love it but the low voltage setting is too high. Needs to go to at least medium

@paulrakis

5 ай бұрын

@@user-ig1tt1jq9n yes exactly. Shuts off to fast around 3.8V just under 3.5 is ok. Won't do any harm to your packs as long as they are healthy. Under 3V is bad

Good morning, I had the same problem, took 3 months to figure out how to update software.❤

@UDRC85

10 ай бұрын

Do I need to buy the Bluetooth link for the remote?

@cslrclorne721

10 ай бұрын

@@UDRC85 don't know if

@luisfontanez1770

9 ай бұрын

Outcast 8s exb new not working with this

@markking2778

8 ай бұрын

How do you update it then

@UDRC85

8 ай бұрын

@@markking2778 I just use the set button on the esc.

Brother you the only one that’s has this video with the actual car. I have one question. Why is my car nearly not turning. It’s like at 25% steering radius. 2 hours old have not run it yet. I think trying to bind it I messed with something on my servo amp or something is wrong out the box. Please help. Got to hit reverse on a 2 car lane. That’s not normal

@UDRC85

9 ай бұрын

I’ll try to do a video on steering and hopefully it helps.

@luisfontanez1770

9 ай бұрын

@@UDRC85 thanks brotha!!

@luisfontanez1770

9 ай бұрын

Quick question is there a way to reset esc to factory mode. I’m thinking dude messed with the esc tuning.

@luisfontanez1770

9 ай бұрын

Figured all programming but only turning sharply in air. On ground it’s like the servo to weak. But it’s new so how’s it possible. I’ll be waiting if you bless us with it. Nothing on the internet for this exb 8s versions. Haven’t ran it. Embarrassing picking it up to turn it around in a tight spot. It barely turns once a lil weight on the servo it seems. Thanks for the good content regardless of my fix. You speak clear and simple. Most theses brains say a bunch of nothings. God bless.

@UDRC85

9 ай бұрын

@@luisfontanez1770 I see what you mean. You can check the BEC but mine was already on the highest setting. That will give the servo and fan more power if you turn it up to 8.4 I believe. I will tell you that the servo is not super strong but good enough. I ran power hobby 65 I believe in my other 1/5 I had.

Nice rig dude, and I've never seen ARRMA branded batteries bfor. I would not use them, I would keep those just bcuz I have never seen them before.

@UDRC85

10 ай бұрын

😂

So is there not a update yet? Im having the same issue

@UDRC85

6 ай бұрын

They came out with a firmware update for the program card.

@StaticDavid

6 ай бұрын

Where can I find the update?

@UDRC85

6 ай бұрын

@@StaticDavid spektrum website