This rtr is such a great bang fr buck. Arrma is really leading the pack for entry level rtr offerings. I love my 3s Infraction. Keep the videos coming. Really enjoy your content. All the best.

Amazing bro! Thanks for doing this 4s run. Unbelievable speeds bud.

That’s freaking awesome!!!!! Happy RC’ing Y’all 🇺🇸❤️🤘🏽🏁

I bought the mega a couple months ago n made it 4s and made a spool for it. I used fuel/ fish tank tubing and stiffened up my shocks. I have next to no suspension in it and it's alot more stable

That thing screams. Wow! Another great video JayTee. 👍

Brother you had that thing a humming! Reaching speeds of a 6s infraction! That's pretty awesome! 👍👍🤙👽😎🤔

I have this same truck and it’s a blast definitely want to make it faster but from this video I’ve learned that I have to do a lot to make sure it stays stable great content

Damn thanks for the video I'm going to get one next week love the power

Thx for the cool vids jt thinking about getting one keep bringing them

Just go ahead and add a few ounces to the front end and a double fan to the ESC!!! 😃 I have a feeling this will be one of my favorite Arrma's.

Wow did that thing take a beating. That’s the way it is though when you throttle up. It’s definitely Arrma tuff.

Hey JT!! Nice runs,looks like she has 90+ in her future all day. Can you add some weight to the front maybe, and cut a couple lines off the rear spoiler. She took those spills like a BOSS!! Definitely going to get one. Oh yeah my GPS shot out on me once and I painted it a bright color to find easier since I'm new to the GPS thing I didn't know thats what flew off!! Lol. As always, great video JT thanks for sharing 👍 and keep them coming!!!

That arrma gets up pritty good it has got a lot more in it 🙏🙏

My vendetta yesterday at 108mph. Can't keep it grounded. Back to the drawing board. However on flip it made a perfect landing 👌

@LynxNinjaTrials

8 ай бұрын

Are you running it on 4S and with the stock electronics??

You should try cutting out little slits in those fake fender vents on top to see if it lets some of that pressure out from inside the wheel wells...

Would love to see more content of this setup on 4s!!

Well that confirms my thoughts. Smaller size and just sub 100 speed wrecks will hold up better than the 6s… imo due to area needed and maintenance /upgrade cost. It’s a lil more an everyday infraction. another great vid. Thanks

What's up JT I found out you can use vendetta part like bulkheads and bumpers to get it lower maybe.

I would just trim that wing down a bit. Leave the sides high, to help with lateral stability, but trim the center down a bit. How are those new Hoons holding up to the speed?

Amazon sells the hobbywing programing card for 9.99 when i purchase it allows to canall the setting on the esc without a computer if your running spektrum electronics

I had to re-calibrate and rebind A few times to get the AVC just right

Thats fast bro Mia try it the 4s battery I bought a whole back the brushed one made it libo 3 and 4s want to make it 6s but nice video now I know what to except your a kool guy thanks for the videos

Thats moving real nice!!!!!!

You need a longer run way, that thing isn’t even topped out yet, and those 4s passes I can just hear the power wanting to unleash!!

That is how my HPI Mavrick looked today bow bow 🤣

Have you seen the new exb diffs for the 3s and 4s lines. Can't believe they finally made exb for 3s lol

Yep I'm saving all my pennies I'll have it in the next few weeks.

Thats impressive on 4s

More JT .....thats faster than my 6s

How has the stock motor held up running it on 4s long-term?

Size comparison with the onroad flux R?

Hi, the ESC and motor are stock when using 4s? Regards

when your GPS reads 11 mph sitting still, and then 18 mph?? I'd be skeptical of your findings. lol I wonder how long the electrics will last running the 4S?

how about 4s with 22t? it is still overheat?

Is it safe running 4s in stock Esc and what’s the top speed stock gearing ?

Is your driveshaft vibrating? Cars got a weird buzzing sound

Omg ! it looks like it’s on 6s already.

On 4s what is the c rate you used

Yooooo, I'm new to RC since like 2 month and really vining with your channel dude😎 Is the esc etc all stock? I'm wondering if I can run my vendetta stock on 4S or if the esc would fry. The infraction and vendetta have the same electronic I assume.

This was EPIC 😂 I want one. Think 4S is too much 🤣🤣🤣

@JayTeeRC

2 жыл бұрын

With some adjustments it should be fine

I put 4s on my arrma infraction 3s but dont works How should i do?? Tenks

These trucks seam to cog a bit on any voltage huh?

Full send 💨

So this means the vorteks can also run 4s stock

Awes!

Can you tell us what upgrades you did in order to use 4S . It seems a lot of people are curious as am I and I’m not seeing any answer. Thank you

@Jason_Voorhees.

4 ай бұрын

Same,literally no replies at all and no look under the hood, smh

Nice one brotha! That thing rips Did you run 4S on the stock ESC & motor?

@JayTeeRC

2 жыл бұрын

motor only

@SilentSassin

2 жыл бұрын

What esc did you run? I know you said you were using the speed gear, did you have to change anything else? Thinking about giving mine a little rip at 4s

🥶💯

Isn't the spur gears metal?

Get the polo creations front splitter it will help I’m running mines on 6s no issues

@fsn417k___9

11 ай бұрын

6s batteries 😨?

@kj4x4couple7

11 ай бұрын

@@fsn417k___9 yes im doing 100+

Hey jay tee what’s up man I love your channel I watch it all the time. I had a question to ask you. I have a arrma granite 3s blx and I’m wanting to go up on my pinion gear everything is box stock can you tell me what your sweet spot is on the pinion? Because I never changed or went up on one before and I don’t want to go up to high and damage anything. Thanks 😊

@JayTeeRC

2 жыл бұрын

What are you wanting more speed? And then again also where are you running it at mostly? That highly depends on several things with the gearing

@JayTeeRC

2 жыл бұрын

I think it comes with a 13 right? I wouldn't go any higher than a 15 tooth and that may be pushing it. You need to check your temps. If you want better speed and stuff I would just leave it stock and get some better batteries in it. Possibly upgrade the motor to a 4000kv and leave the stock pinion gear in there

@natedawg5150

2 жыл бұрын

Ok thanks I didn’t want to upgrade pinion without finding out what the stock one was first thank you again for the help. As if 50 mph ain’t fast enough already lol this truck is a speed demon the way it is but some ppple want more I think I’m one of them.😂

@natedawg5150

2 жыл бұрын

Also does it have to be a safe D Type of pinion?

LMFAOOO those two seconds were crazy

@JayTeeRC

2 жыл бұрын

ikr 🤣🤣🤣🙉🙉🙉🙉

From Chicago good morning

It is screaming!

I haven't found avc I like

Hey question what did you do to turn it from 3s to an 4s

@user-uy7fo5lh7c

9 ай бұрын

Do u have an answer of that?

Well… now I know if I get one not to run 4s😂 Thanks for the vid testing it out on 4s though😎👍

@JayTeeRC

2 жыл бұрын

😉🤣😆🤣😆

Hey what’s up man, I have a question about my tlr. Every time I run it and hit the brake the motor goes into reverse and I lose forward for a min. What do you think is causing this? I am running the castle mamba x and 2200 kv castle on 6s. Could it be the motor wires being crossed up? Let me know what you think. Thank you

@JayTeeRC

2 жыл бұрын

You need to recalibrate it. Your ESC

@timbootz8894

2 жыл бұрын

@@JayTeeRC ok I’m going to try that. Thank you very much

Nice bro

@JayTeeRC

2 жыл бұрын

tks

Instead of flipping the wires or using the remote, change the motor rotation thru the esc settings .

Wait they put the 4s esc in the Infraction 3s ?

@JayTeeRC

2 жыл бұрын

no.....i did

I have the same truck when I installed a 4s battery the steering work but it doesn't run how did you get the truck to recognize the 4s battery? Thanks in advance

@JayTeeRC

Жыл бұрын

I changed the speed controller out

@RcMarlin

Жыл бұрын

@@JayTeeRC thanks for your response where can a get a compatable speed controller from

Mine should be here tomar

Is this the stock motor on 4s, sorry if you mentioned it already.. I love the way this thing sounds and I love rc's that are impressive out the box and this is one of them...

@JayTeeRC

2 жыл бұрын

yes

@Nanoscape30

2 жыл бұрын

@@JayTeeRC dope bro hey I've been watching alot of new ufo interviews bro, what do you think of Billy Meijer, and have you heard about that Ariel school in Zimbabwe in 1994 where the uap touched down, I've been discov9ng alot of new storys and interviews lately I found some dope ufo channels it's crazy interesting

@JayTeeRC

2 жыл бұрын

@@Nanoscape30 yeah man a lot going on. A lot more I want to put out there but I'm trying to see what's going to go on with KZread in the next week or two

@Nanoscape30

2 жыл бұрын

Here's a link

@Nanoscape30

2 жыл бұрын

@@JayTeeRC forshure man check out those 2 channel links I sent you there's amazing stuff on there is awsome

🎉

Some body needs to make some drive shafts for it.

@NCMATT

2 жыл бұрын

Sounds so bad

Yo so this is the 3s..ive got the same one..and u put the 4s batteries in??

@JayTeeRC

Жыл бұрын

change the esc

@christophersohrabi4610

Жыл бұрын

@@JayTeeRC ok will do.thank u. I like the 3s better than the 6s. So def gonna try it out.

Why I cn not use 4s in infraction 3s?

@JayTeeRC

9 ай бұрын

stock esc cant handle it

Seems like the Vendetta body can handle 75+mph much easier.

@lancestickle4346

Жыл бұрын

I wonder if the opening on the top of the wheel wheels make the difference? If so you could maybe modify the infraction the same way to prevent parachuting 🪂

I upgraded mine to 6s… get ready for new parts 🤣

@JayTeeRC

10 ай бұрын

😂🤣

@kfloyd824

10 ай бұрын

@@JayTeeRC I broke the shaft immediately, burned all tires… but somehow managed to not wreck it yet 😬

Man this thing sounds like a nitro at speed 😂

6s run.

That thing sounds mean

Lol good video

I think its the body not aero try the vendetta body

Can you say Superman

Small car fast speed not a good combination lol

Change the body

THAT IS NOT A infraction.