Ares Wardrobe Sliding Door gear - track kit for bottom rolling setup for DIY - Buller Ltd
Wardrobe sliding door gear from www.bullerltd.c... with two tracks on top and two on the bottom.
(wheels are shown for presentation only - normally are not visible as attached to the back of the doors)
It's ball bearing based rollers provides smooth and quiet movement.
Reliable sliding door system for home or office wardrobe,
Easy installation,
Quiet and easy movement,
For wooden or MDF doors,
Max individual door weight - 70 kg,
Door thickness minimum 16 mm,
No maximum door thickness
(individual rails can be put further apart to accommodate thicker doors)
Aluminium tracks can be easily cut to the required length
Multiple systems can be aligned together to create longer tracks when required
For extensive sliding door gear range visit our website www.bullerltd.c...
Пікірлер: 4
The screws get in the way when the door should be sliding back and forth smoothly along the tracks. What would I do please.
@bullerltd
Жыл бұрын
Hello, are you using countersunk screws for the tracks? As you would need them so the screws would end up flush with the track. If you would like further assistance please contact our team either with livechat, tickets or via a phone call on our website and we would be more than happy to help.
How do you decide how far apart to set the bottom tracks if your door is 20mm thick
@bullerltd
6 жыл бұрын
Just add extra 2mm.