Do you run wheels spacers? What're your thoughts on them!? Shop Wheel Spacers! bit.ly/3e0mFbo​ Sign up for our Newsletter! - bit.ly/3k7GNuX​ Wheels + Tires! - bit.ly/2ZQ5pxw

@kadenlarson5000

2 жыл бұрын

I want to put spacers on my 2011 gmc 1500, I got a 3.5in rc lift on it with 20x12 arkons with some 33in federal I got from you guys. The white Chevy in the vid has its front quarter panel trimmed, how did you guys do that?

Me driving my lifted truck with spacers down I-64 with this playing right now 😳😳😳

@drewarthur2169

3 жыл бұрын

Ayo focus on the road bud😂

@codyblair7338

2 жыл бұрын

VA??

@dakotadugan8200

2 ай бұрын

@@codyblair7338 lmao

@deadbodybaby1

2 ай бұрын

That’s fucking hilarious

Cant go wrong with Bora 🤟🏽🤟🏽🤟🏽🤟🏽

@jeffstanley6961

2 жыл бұрын

Bought Bora 3 years ago and put them through hell. Still going strong. 🤙🏼

@Blackocalypse

2 жыл бұрын

@@jeffstanley6961 Hell yeah bro🔥

I been subbed for a great while I love you guys you have amazing advice. Insane truck builds, very good knowledge On should/should not to Do. Also so many suggestions on about 98 % off trucks based off of experience know how And it’s happened to me or my friends in the past situations keep doing your thing guys love the content.🤘🏼😎

@CustomOffsetsTV

3 жыл бұрын

Awesome thank you!

I love your guys videos. Just bought a 2001 Dodge Ram 1500 hoping to soon be putting some wheels and tires from custom offsets real soon! Keep up the good content

@jonny555ive

Ай бұрын

Good luck finding the option on their website, they have everything else dodge than RAM..... Just a heads up.

Got some boras about a year ago and still holding up strong 💪🏼

I have 1.5 inch spacers on my 2014 Tacoma and I beat on it both on and off-road every day. Never had an issue in years.

@s550ceez

Жыл бұрын

What brand?

Day 63 of asking Custom Offsets to build a Monsterjam Monster Truck with 66x43 tires.

I run 2 inch bora spacers, ordered it from the US thru the website, had them on 2 trucks so far, atleast over 2 years and never had a problem with them yet.

@larrymobley1507

3 ай бұрын

any bearing problems?

Petition to get banker to do a video all alone. We need all that energy

Good info y’all! Mad respect for y’all

Ive run several sets over the years and never had any issues.i always loctite and torque the spacers to specs.i cant tell you how many times ive seen people just use a impact to tighten spacers down.

@Jay-hp6pu

2 жыл бұрын

It’s usually the dumb people that give things a bad name.

@dylansmith3

Жыл бұрын

Is it okay to use red locktite?

@seantylerwray

Жыл бұрын

@@dylansmith3 use the blue medium strength.the red high strength needs to be heated up around 500 degrees to get it to break loose. I always re check my spacers when I rotate my tires. My spacers have been on for over 2 years and haven't came loose using the medium strength.

@dylansmith3

Жыл бұрын

@@seantylerwray okay I’ll get that. And unfortunately my 1.25 spacers for my Silverado aren’t hub centric. Was just in possible to find the adapters I needed. Should I be okay? My torque spec is high on my 99 think book says 140ftb so I’ll do that twice one for the spacer and second for the wheel on the spacer.

@Gordito4

Жыл бұрын

@@dylansmith3 hey Dylan, I just order a set of ksp hub centric spacer for my 21 Sierra, they’re 1.5 in and only cost around 150 shipped for all 4 ! They’re also forged aluminum and I’ll keep you updated once I get them installed

I’ve had spacers on my taco for 3 years now with no issues, plenty of abuse on the road and off. Just like you said, buy quality parts!

I’ve used Spidertrax on multiple Jeeps running 35s and 37s, usually on 17s. City, highway and rock crawling. Never had an issue. Only used the minimal width needed for clearance.

Yes i have wheel spacers on my ram 1500 and i bought them from Amazon and they r HUB CENTRIC no issues with them and ive been semi stuck with a 16ft trailer loaded with my toys and one on my rear bed and got out nicely,one other thing i used red lock tight on my spacer bolts and torqued to 100 ft lb .....

Thanks guys. I have my factory STX wheels on my Ford and I like them. So I don’t want to get new wheels yet I do want that sexy poke. Spacers is the answer.

I swear to god your videos read my mind half the time. I’ve been considering wheel spacers on my ‘08 ram 1500 just to add some stance and looks

@raymondayala8510

Жыл бұрын

What type of wheel spacers did you get and did they work good for you I have the same truck just want some advice

@Hutchy1993

Жыл бұрын

@@raymondayala8510 hey, I never ended up getting any. they had the bora spacers on amazon for awhile and when I was ready to buy them they were no longer available. I'm up in Canada so it is a lot harder to find the bora brand spacers therefore just left stock for now

Thanks for the info bro!!

Wow its been awhile since i’ve been this early, Love the channel.

Billet 6061 hub centric spacers with grade 10.5 studs are available for around $150 a set of 4. Billet 6061 is not as good as 7075 aluminum, but it’s stronger that 99% of the cast wheels on the road. Also, spacers are no worse for wheel bearings than similarly offset wheels are. Those are facts!

@BIGREDTECH

3 жыл бұрын

That’s the truth. Still putting the same amount of leverage on the hub with offset wheels!

@banzaiib

2 жыл бұрын

Yup. Wheel bearings don't care if it's a spacer or wheel offset moving the COG of the wheel/tire outward... The net effect is exactly the same.

Love the content you guys

I also had 24x14 American truxx blade chrome wheels with 3 inch spacers and 2 inch wheel adapters so 5 inches total.

@jesussuarez9742

2 жыл бұрын

hell nah

Just paid off my truck, so I’m hoping to start my truck build soon

Just ordered a set of Bora to fit my 17in wheels on RC lift kit

Supreme suspension 2" here.. just back from 2,000 mile road trip still chilling

@austinpalmer34

3 жыл бұрын

Thanks I just got mine a few days ago bout to put em on

Is spacers mostly to help with turning when you have big rims that like to rub on the control arm?

Will the 25mm rear spacer and 20mm front spacer damage the wheels, suspension and bushing in the long run?

Curious, does a 2 inch(High quality) spacer put the same wear on the trucks components as a wheel with a high negative offset 🤔

@johnnymartens9558

3 жыл бұрын

Yeah, basically however you get the wheel out there whether it be offset wheels or wheel spacers, itll produce the same wear on the suspension components and wheel bearings

I use 2 inch 50mm dcvamous hub-centric its run great no issue i bought them from amazon before 3 month

They should do a this or that on which truck is better for each year

So i bought a truck with a lift kit and it had deep set rims that rubbed on the front when turning; had to get new wheels cause one was bent. Anyway; the front tires are about 2 inches wider apart than the back. I just want to widen the rear to match. Is it safe to get 1 inch spacers just for the back? I think ill have to cut down the lug studs to make sure the wheel fits flush; and im not to sure about that. Ive been hesitant about it for about a year so i figured id start asking around

I’m running 1.25 inch hub centric titan brand been running them for a few months no complaints here

I went with Bora. Backordered and covid took a long time for them to get here. But I'd rather go with a reputable solid brand then take any chances. Just my thoughts.

I have cheap eBay aluminum 2” spacers and I’ve done a lot with them I even towed my 7,500lb camper with them and they are still going strong. I just put aftermarket wheels on my truck and my stock lug nuts barely fit in the whole of the rim so I’m hoping the rim doesn’t put any pressure on the lug nut and bend or snap it off while driving.

@flyingjoed

Жыл бұрын

Wow! No substantial amount of lug bolt to attach your lug nuts to? That's a disaster waiting to happen. That comment was a year ago so I'm thinking a disaster has already happened! Hope you're still kickin out there!

@Brandon_Jackson

Жыл бұрын

@@flyingjoed nope I’m still good. I still have the setup but I rarely drive it because I found out my rim is bent. But surprisingly the spacers are still holding up to all the abuse lol.

I like how you occasionally give a shot of you from the side, as you are talking, and then, do another shot from the front. It's very avante garde!

Yo love y’all’s brand keep it up

@CustomOffsetsTV

3 жыл бұрын

Absolutely man!

Are the rough county 2in spaces good to run with 12 wides

Good video but please explain more on the damages spacers could potentially do to your truck

@CustomOffsetsTV

2 жыл бұрын

Proper installation shouldn't incur more damages other then the wear and tear on the wheel bearing/ball joints and even that is dependent on your setup

@mmo8988

2 жыл бұрын

@@CustomOffsetsTV Exactly

@twocooleetoh3128

Жыл бұрын

@@CustomOffsetsTV palabra

I run 1.25 spacers on the rear of my truck. Haven’t had a problem in over a year

Yeah I was driving next to a lake in the space are cracked and came off it was aluminum I don’t know anything about spaces at the time but almost went into a lake upside down but the truck at the ditch that’s best far is it where it but I do have a bigger vehicle suburban three-quarter ton then I’m looking for spacers for eight hole to six lug if you have any questions on it

Do 2 inch wheel spacers affect performance?

I thought he was going to talk about the sandwich-style spacer that just pushes the wheels off the studs. I’d never use them, but it’s really the only option for pushing the wheels out just a 1/4”

@Isinipersonal

Жыл бұрын

Is that not what he talked about?

How long does it take to RECEIVE Bora 1 inch spacer for 2023 Tacoma ? On line it shows 6 weeks, is this correct ?

I have a 2004 Ford f150 I want to add spacers but I'm not sure if they are safe or not I don't do allot of hauling only when a friend or family is moving and I don't go off road unless I have to I just want to buy some thing that would be safe what do you recommend that is really safe atleast 2 inches or how many inches would be safe

@CustomOffsetsTV

2 жыл бұрын

You’d be perfectly fine!

Is it safe to drive 600 miles almost every weekend? I got a f150 w/ 35s, I want that extra stance. Please help

I have the 2in titan hub centric and have had no problems with the 5 months I’ve had them

@ryancorra3995

2 жыл бұрын

How are they holding up now?

Question, will a set of spacers help improve my fitment on my wheel and tire set up, where my tire currently rubs on my lower suspension arm and sway bar at close and at full lock? Otherwise it clears everything else fine.

@kevinjimenez9322

3 жыл бұрын

Yes

@CustomOffsetsTV

3 жыл бұрын

^ Yes it will

I’ve never had an issue with spacers. Always torque them to appropriate specs.

Not everybody wants to drive all the way to Wisconsin should definitely open up shops world wide. Y’all are good enough to.

@CustomOffsetsTV

3 жыл бұрын

We've been tryin! We all wanna get outta this state bad!

@willmaxwell3949

3 жыл бұрын

@@CustomOffsetsTV move montana, I am in belgrade

@zrod6721

3 жыл бұрын

@@CustomOffsetsTV come open a shop down here in good old Florida

@twocooleetoh3128

Жыл бұрын

Califas cuhh

Soooo can we get a video of him running around the building 🤣

The wright spacer..the wright way put on will not give problems. Next thing is how wide can you go without putting to much stress on things.. I run 1.5mm front and 20mm rear.m hubcentric. I find my car handling much better..cornering is more tight and less body roll even my suspension feels better..18 inch low tires..Qashqai J11..it was a bit stubby on bumbs etc..but now with the little more leverage of the angle..it feels much better. So spacers perfect..but just don't over do it ..and if you know your bearings are a bit old already..change them before you put spacers..

The whole reason I wanted to get spacers is so I don’t tip my lifted truck while doing donuts. So this video gave me my answer on if I should get some😂

@CustomOffsetsTV

2 жыл бұрын

Full send!!!

Hey really want to see a 4Runner teir list!

@CustomOffsetsTV

3 жыл бұрын

We shall see what we can do man!

I see people saying 2” is the safest, but i’ve been dipping into 3” spacers. I just want them so I don’t tip my now RWD explorer doing donuts. Are 3” safe??? Seems like a taboo subject in the community.

"I don't know what to do with my hands" 🤣🤣

I need some 2” spacers for 2015 gmc 2500hd

I need hostile fury 22x12s n tires I’ll let y’all pick ya dig how bout it huh 🤷🏾

What happened to Fuller? I’m not complaining about the new people I was just wondering.

@cgagsstudios8835

3 жыл бұрын

Got a new job somewhere else

This finna be interesting..🤣

Is it dangerous to use an adapter that has less lugs than oe?

@CustomOffsetsTV

3 жыл бұрын

While not recommended it can be done with the mind set of it will not be able to haul/tow like it could prior

1.75 spidertrax wheel spacers. I agree don’t go cheap. Too important and you get what you pay for. So far no issues

I didn’t even realize how early I was until I read the comments. 😂

I’ve had wheel spacers give me a fun time. The threads completely pulled out and broke a few lug and the next thing I know is I see my wheel pass me. Trashed my two front wheels and broke my bumper valence.

@lewisgeer1994

Жыл бұрын

What brand where they?

Yes, I run 1.5” hubcentric spacers.

Here is the deal.. spacers are safe if you do 3 things.. Buy..Hub centric spacers that fit your truck and rim. Use the correct bolt grade for truck or car weight. Use locktight and torque to bolt grade specs. Your welcome.

Are supreme suspension wheel spacers considered “high quality” ?

@CustomOffsetsTV

2 жыл бұрын

We only recommend Bora's! Check 'em out here - www.customwheeloffset.com/store/spacers-adapters

I had supreme suspension billet 1.5" hub centric spacers on for a year then towed a trailer from NY to FL it was a few thousand pounds. Then I went to school for about 3 months driving 106 miles a day going 85-100mph while them on. Only reason they are not still on because a 2011 F150 leveled on 35x12.5's cant fit spacers. I trust them buy quality.

Rate welder rigs !!

Jour 12 de la demande d'une vidéo sur les meilleures roues hybrides😁😁😁

Are dual drilled rims safe

@CustomOffsetsTV

3 жыл бұрын

Plenty of people run 'em with zero issue man! We've had thousands come through with zero issues!

Mullet wavin, AC/DC listening! Preach!

i wanna see biggs run those laps

I'm a automotive tech and have never seen any good from wheel spacers. I advise everyone that if they want that stance save your money and buy that wheel that gives you the stance you want along with high quality lift kits

@ericg4x4

2 жыл бұрын

Tell me what the difference is between quality wheel spacers are versus offset wheels. They put the same amount of leverage on the hub and bearings!

@twocooleetoh3128

Жыл бұрын

@@ericg4x4 he’s back in Cuba with no internet thus the delay replying

Can you tow with spacers?

@CustomOffsetsTV

2 жыл бұрын

Yes you can, plenty of people do Keilan!

Cool

I’ve got 2 inch spacers on my f150 and seeing this video kinda scares me😂 I can’t remember the brand but they were around $225 in price but I’m not sure if that means they are good quality or not. Let me know CO!

@CustomOffsetsTV

3 жыл бұрын

We're huge fans of Bora, but typically if they fit the hub and the hub bore of the wheel, full sends!

@johnnorman6643

3 жыл бұрын

@@CustomOffsetsTV thank you so much!

I have 2” bora spacers on my f150 but the I don’t have a hub centric ring should I add the ring btw the wheels are aftermarket not oem

@CustomOffsetsTV

3 жыл бұрын

Not really needd with the spacers

@michaelf1507

3 жыл бұрын

@@CustomOffsetsTV oh ok thanks!!!

@lukeroberts5501

Жыл бұрын

Im confused, they answered you saying “the ring is not needed with spacers” but in the video he literally says as long as they have the hub ring then running spacers is safe. So?

@dylansmith3

Жыл бұрын

@@lukeroberts5501 that confused me too lol but my adapters aren’t hub centric but what I did was get hub centric rings for the spacers to meet with the hub properly but for now my spacer to wheel won’t be hub centric. Hope the 10.9 grade studs hold up

@lukeroberts5501

Жыл бұрын

@@dylansmith3 ahh I see, thanks

dang

If you want a set of them things, go to a college near you and pick up a set of Safe Spacers. Wait, did I misunderstood you? Thank you for the video. Everyone thinks that I have spacers on my truck, but it’s actually rims with a ridiculous offset. I’m almost done getting my truck painted and I’m in the market for 20x12 with maximum offset available.

Day 6 of asking for a viewer's inport truck rating video 🔥🔥🔥

I personally will never run them. I’ll just save up and buy the wider wheel.

Bora!!!

114 closest I will ever get let gooooo🔥🔥🔥

Saw a jeep that lost a front wheel on the side of the road today. Not a good day for them

Well if you use a 12’ spacer of course it will be dangerous… is a 1/2” spacer more dangerous then no spacer… sure but by what factor. The factor of more dangerous is so small that other factors while driving are a bigger concern,

Geez dude, lay off the coffee! Wheel spacers are illegal here in Australia…so that kinda answers that for us 😂

Buddy always finishes his sentences like this

I've bought $500 spacers and they still threw my damn wheel off

Day 11 of asking CO for a "Rating your OBS Fords" episode!!!!

Spider trax!! And.... They have a POUNDS PER SQUARE IN & FT POUNDS for a reason!! DO NOT OVER TORQUE YOURE FUKIN BOLTS!! Shhh.. Super secret!! They wont fall off!! Double super secret!! New lug nuts on "some" vehicles have (washer mounted lugs)... Those lugs, they just keep spinning.. Not like old lugs without the washers mounted!! Be careful, those spin very easy!! Dont ask me how i kno..

Idk man my eBay spacers have been through some abuse and no studs have broke nor anything up front and I’ve been running them for about an year now

@Tiye_murra

3 жыл бұрын

Ps I’m running a 20/12

Does anyone know anything about rough country spacers ?

@carcam360

Жыл бұрын

Have had them on my 17 silverado for at least a year now, running 33x11.50 No issues. Dont think they are hub centric

@dylansmith3

Жыл бұрын

@@carcam360 I’m installing wheel spacers that unfortunately aren’t hub centric, how are yours holding up? Was looking for some kind of insert that would give me the hub centric lip for the wheel to sit on but don’t think they exist. Think it’s either built hub centric or without

@carcam360

Жыл бұрын

@Dylan Smith they were holding up great! Unfortunately, my motofab level was destroying my front end. So back to stock. Wheels barly fit but looks good

Don't have my truck on there 😕

Not a fan of the added stress they put on your wheel bearings. Would rather get rims with the offset I need.

@2daaxe4head

2 жыл бұрын

Add same amount of stress

@brandenloy9445

2 жыл бұрын

@@2daaxe4head nope, physics.

@sakurchanchachii2133

2 жыл бұрын

@@brandenloy9445 actually wider wheels, cause the same amount of stress as spacers..

@brandenloy9445

2 жыл бұрын

@@sakurchanchachii2133 if you understand the physics at play here you will realize you are wrong.

@jmarxful

Жыл бұрын

@@brandenloy9445 what physics? If you achieve a negative offset either by wheel or spacer the leverage placed on hub and bearings are equal.

Dude reminds me of those wavy arm inflatables outside car dealerships. Sit on your freaking hands already.

I65 runs the indy not 64 but besides that

I’ve had 2 sets f*ck off on me... friends have had them for years I’ve just had bad luck

LOST A DRIVER SIDE REAR WHEN THE SPACER GAVE OUT...SHEARING OFF THE LUGS, DESTROYING THE RIM, COMPLETELY CHEWING UP THE WHEEL WELL/REAR FENDER...BUT THE TRUCK LOOKED GREAT PRIOR TO THAT BULLSH!T HAPPENING...22X10 ON A 2003 DISCOVERY 2...IJS.

Um yeah this is making me want to immediately buy spacers

@CustomOffsetsTV

2 жыл бұрын

Scoop 'em! - www.customwheeloffset.com/2000-jeep-cherokee/spacers-adapters

Run spacers on everything and NEVER HAD a problem..run cheap ones and expensive ones..