Oh man I'm going to put some in my garage. I'm getting old and was a mechanic for 37 years old eye sight isn't as good as it use to be. Great video's I'd love to have that garage. Mine is 25x30 I build myself 34 years ago. Stick build pored the concrete slab and everything. I'm all most 70 so I'd like to have one with high ceilings so I can install a lift. Keep up the good work and the videos coming.👍

@ProjectDadLife

2 жыл бұрын

Thank you sir. Will do it

Thanks a lot for taking the time and effort to make this video! I am having a hard time finding videos where people are using these high bay LED lights with the optional diffusers / reflectors. I guess not many people must know yet they could be a nice addition to reduce spotlight glare and spread the light out more evenly. Perhaps you would want to try some and see the difference and shoot a video (perhaps others would like to see as well)... I ordered some high bay lights and diffusers for my shop but they have not arrived yet, was just looking for some videos showing lights with diffusers.

@ProjectDadLife

Жыл бұрын

Yeah thanks for the support. They are really nice and so easy to setup.

Hey there bud, I bought the same lights for my future build this spring, going to be putting up a 56x112x16 man cave/car storage building. I bought 21 of the exact same lights with the diffusers and a couple of the wall mounts for the exterior doors. Your shop is looking really nice! Good luck and don't work too hard!

@ProjectDadLife

Жыл бұрын

Hey thanks man. That’s gonna be a nice shop there. Hope your build goes smooth

I saw these on KZread while looking for high bay lights for my new shop. I ordered 10 for a 50x64 shop and I'm really happy with them. They light it up Ike daylight and didn't break the bank. I'd recommend them to anyone. Mark Prince Edward Island Canada

@ProjectDadLife

Жыл бұрын

Awesome l! Yes they are so bright. Still loving mine

I replaced 2 500w old school highbays with 2 150w LED highbays and it's instant start brighter light. LED highbays are amazing...

@ProjectDadLife

2 жыл бұрын

That’s awesome yes they are!

New subscriber love the content buddy.

hi man i like your video,super cool.

I’m new to the channel great videos man

@ProjectDadLife

2 жыл бұрын

Welcome and thank you very much

I love my hyperlites. I put them in my barn, 2 for a 30x40 but obviously has lofts. More than perfect lighting and you cant look directly at them unless you wanna call-in tomorrow lol. Im on the fence honestly between building a whole separate building or converting it into a shop. 6-8ft of it is blocks on footers. Just need to do beams to remove the lofts then id have probably 16-18ft or more at the peak. Of course then pour the middle with concrete

Those lights look amazing, love the content!

@ProjectDadLife

2 жыл бұрын

Thanks bro

Outstanding job on the shop lights! You'll be able to see really well when you are working on your projects!

@ProjectDadLife

Жыл бұрын

These lights literally blew my mind! There great I still only ever turn 3 on unless I need a surgical light room

@theaustralianconundrum

Жыл бұрын

@@ProjectDadLife Well that makes sense because you have 1,000 watts of LED lighting with all six turned on! I'm in Australia and have used similar lights. Great instructive video but you had me more than worried way up on that ladder like that. Serious lean angles and if the feet gave way you might end up in a wheelchair. Stay safe man!

Hey brother, I'm in the process of building a very similar shop. I've been struggling with what kind of lights to put in, and these look great! I'd like to see how the wall lights look when you get them installed. I appreciate you making these videos; they're very helpful!

My buddy lit up his 30x50 with 4 of those. They're bright.

@ProjectDadLife

2 жыл бұрын

Yes they are just 3 is plenty for mine honestly. Thanks for watching

I would swap the two center lights to balance out the light when only using the one circuit so all the light isn't on one side of the shop. Curious if it would make a difference when only one set of lights are on.

That ladder setup is... uh... I'd never do that. You have some very big balls.

@Mr_BUSINESS_24_7

3 ай бұрын

What are you supposed to do ? Go buy a $20,000 scissor lift and try to save money on your electric bill with LED's ?

@2003evodave

2 ай бұрын

@@Mr_BUSINESS_24_7. LOL,,,,apparently you are not aware of the term “rent”. Scissor lifts are cheap and EZ to get.

@Mr_BUSINESS_24_7

2 ай бұрын

@@2003evodave can't get a scissor lift in my shop. I have too much stuff. ladder, it is; for me. ... with some securing the ladder feet to my concrete floor my standing on the ladders feet.

Didn’t you put two outlets receptacles up there? So you have 2 unused

We bought 20 of these for our barndominum shop side

@ProjectDadLife

2 жыл бұрын

I bet that’s bright! My 6 are crazy I only use 3 most of the time.

What would be cool of one of them is to put it on a rope pulley so you can lower it down over a car. Have a cleat attached to side wall.

@JackoTJK

2 жыл бұрын

they're way too bright. It's not like a twin 58w fluro that needs to be 7foot of the ground to have any decent impact. In fact it is in the name Highbay that they are designed to be used high. In fact the higher they are the more spread out the light becomes.

@robertdatson1002

Жыл бұрын

​@JackoTJK ...agreed...I had a 400mm chain on mine but was to bright so the chain came off an what a huge difference it made....best lights tho

@scott1395

4 ай бұрын

As an electrician I've installed these at different heights! When they are too low the light gets in your periffle vision and it's not good! These are much better for high ceilings! I love them when installed that way! Can't beat the price! I have bought some of these from a different company that had a hidden switch were you could set them at 100, 150 or 200 watts!

Actually both 4000K and 5000K are nearer the 'warm' side of lighting to get to hospital or daylight levels you need to be above 6500K. In a shop and as your eyes age the difference between 5000K and 6500+ is pretty striking when doing detail work. I installed my shop with 7000K and have never regretted that decision. I would never go for a lesser K value in a work environment. I used the four foot daisy chained 'florescent' style and put enough in to avoid any shadows. Even with them I add more on each machine. You just can't get enough light when machining or wrenching.

@ProjectDadLife

2 жыл бұрын

That’s good info. I couldn’t imagine 7k. The 5k does put out pretty working light but I prefer the ambience of the warmer light really lol. Thanks for watching

@mikezupancic2182

Жыл бұрын

In the lighting world, the 5000k is considered daylight, 4k is cool white, and 3k is warm white. 6 and 7k are considered blue light. A bright sunny day is roughly 5700k.

Why does the wiring video say it is private?

how about the led wall pack lights you have, did you make a video, how do you like them ? for out by your entry door? thanks Mike

@ProjectDadLife

Жыл бұрын

Yes I still have but unfortunately I haven’t installed yet!

Do the lights sway in windy weather?

Great video! How many amps are these chewing up?

@ProjectDadLife

2 жыл бұрын

Thank you. They only draw 1.3 amps each actually

Wouldn't you want to put in your additional truss members before placing the lights? They'll be lower, I think, and possibly a better location for lighting. Also, I do read manuals. The last thing I want to happen is that someone comes by two years later and says, "did you know these lights have this function if you push this little button?" etc. Enjoying your videos. Since I just found them I'm able to bing watch the whole series.

@PJL7095

2 жыл бұрын

Come on… we’re men. We have to do & redo things 5 times over

@JackoTJK

2 жыл бұрын

Highbays work better the higher they are. I mean. It's in the name.

it's time to replace the crappy "garage lights" with something that doesn't spark, crackle and fail! i need something of better quality for sure. i don't need a lot of fixtures, maybe 4 in my 500 sqft, 10 ft ceiling workshop. what are your thoughts?

Question - How many amps on your circuits did you have to wire up for the lights? I am building my own 30x45 foot shop. After watching your video, I contacted Hyperlight and I bought one 150 Watt LED High bay light (Hero series) to examine up close before buying the remaining lights. I measured the current this light uses as 12 Amps. If I use 8 of these I think my amperage will be over budget. For your installation, did you have to put in a hefty circuit to supply all your lights?

@ProjectDadLife

2 жыл бұрын

Hey Bob per spec my lights only draw about 1.3 amps each. I have 6 running on one 15 amp circuit no issues at all.

@bobstokes4457

2 жыл бұрын

Thanks. After sending this I realized I made a dumb mistake- the meter adapter multiplies the reading by 10 so I actually only have 1.25 amps per fixture. Thanks for your very helpful video. I just purchased 7 more lights from hyper light!

@ProjectDadLife

2 жыл бұрын

@@bobstokes4457 that’s great no worries you’ll love them.

@theaustralianconundrum

Жыл бұрын

@@bobstokes4457 You will LOVE them!!!!!!!!!!

Hykolity offers the same light, 5 year warranty and they actually hold up great over years. Paid $260 shipped for 8. Similar brands would've cost me from $800-$1200

@ProjectDadLife

10 ай бұрын

Nice I’ll have to check them out

@Roaggie

8 ай бұрын

​@@ProjectDadLifewere you able to contact an actual person in the US. I keep getting an indian sounding person that wasnt too knowledgeable.

So if you had a 40x50x16 shop how many of these would you recommend?

@ProjectDadLife

2 жыл бұрын

Honestly I’d say 6 like my setup would be plenty especially on a budget. 8 would be surgical shop

Realistically 3 lights would do fine in this workshop but having them spaced I found means you don't get the bonnet/boot shadow when working on cars

@ProjectDadLife

2 жыл бұрын

Oh yeah 3 lights would’ve done fine. It is super nice to have the super bright option though!

Nice T/A

@ProjectDadLife

Жыл бұрын

Thank you

Fyi warm white is in the 3k range, 4k is cool white, and 5k is considered daylight.

@ProjectDadLife

Жыл бұрын

Thank you

what size shop is this? wall height? love the videos! have a shop going up and am deciding on how many to get.

@ProjectDadLife

2 жыл бұрын

It’s 26x40 already wish I would’ve went 30 x 40

@futball7289

2 жыл бұрын

@@ProjectDadLife lol I can't argue with that. I'm going 46x40x12. How tall are your walls? I'm really trying to figure out how many lights I may need. I've done their configuration and all that too, just looking at the vids on em

@ProjectDadLife

2 жыл бұрын

Walls are 10’ . 8 of these lights would be plenty I promise. Mine are wired up on 2 circuits 3 lights each and I only ever turn 3 lights on for %99 of my work.

you didn't want to go with the dimmer option ? I think that would have been the move.

@ProjectDadLife

Жыл бұрын

With the bright white it would definitely be needed but the 3 warm white one I’m running primarily are perfect!

The camera has auto exposure and auto white balance so that’s why the viewer won’t see what you see.

how many feet apart are they ?

@ProjectDadLife

4 ай бұрын

About 10’

I would never mix warm/white lights together. Their CRI is low, 80, and that would be fine for a shop light but not fine if your're lighting for video. (Retired pro photographer/videographer) You could go with good video lights close up for your video and let the shop lights do what their going to do.

I prefer the warm.

@ProjectDadLife

6 ай бұрын

Me too still prefer the warm

Wow, you are so good looking! 😍

@maximilianobesso7732

2 жыл бұрын

😝

Are these the hero or saturn models

@ProjectDadLife

Жыл бұрын

There the hero model.

@mstang61

Жыл бұрын

@@ProjectDadLife I work on my cars, but also have parties. If I mix the 5k and 4ks meaning in a 30x50x16 two rows, each row I'm thinking 4k then 5k, and only use the 4ka for parties, would that work?

@ProjectDadLife

Жыл бұрын

@@mstang61 yes sir that’s exactly what I did. I got 3 4K in a row and 3 5k in a row I use them all for mechanic work and just the 4K for hanging out and it has the perfect ambiance.

So you have been using these for 2 years, are you starting to have any light failures ?. I am hearing after a year these are failing.

I as a lighting designer (retired) always discouraged my customers from utilizing 5000 kelvin lights. My opinion, too much blue light. Blue light over long times will cause eye damage.

@ProjectDadLife

2 жыл бұрын

I totally agree I’m so glad I opted for 3 of the 4K lights. The 5k are very blue bright and I usually only run the 3 4000k lights honestly. Thanks for watching and the input.

@2015_Rubicnn

Жыл бұрын

Yeah, I can't stand anything over 4000k, I'm going with the 4000k versions in my shop.

I'm not sold on all of those "carport" garages.... Not like they sell and install them at a deal either....

Sooooo much better than fluorescents, halogen or mercury....

@ProjectDadLife

2 жыл бұрын

Yes there great! So worth it

Color render index CRI of >80. Thats pretty bad. I’m all for bright, but quality light matter. My head hurts already.

Your photo title should be, “Too bright?” and not, “To bright?”

Yy

TWO lights are not enough TO be TOO bright.

@ProjectDadLife

2 жыл бұрын

Toochae Toochae they are definitely to bright