No video
ARDEX WA Epoxy Grout and Adhesive 2: Cleanup Tips and Tricks
Part Two:
This video will show some tips and the process for cleaning ARDEX WA Epoxy Grout and Adhesive.
ARDEX WA Epoxy Grout Product Details: www.ardexameric...
ARDEX WA Epoxy Grout Tech Data:
www.ardexameric...
Пікірлер: 44
The first time I used this on a 30K bath room I watched this video... It dam near cost 30k ! so now I work a small 3’x3’ space and clean then go on to the next ... I will say I love this stuff and use it on every shower job
Great video - busting myths about epoxy grout. Love it
This guy had been smoking some good stuff
@fightfan311
4 жыл бұрын
And still got the tile clean AF
Is that a little textured like non slip for shower floor.?
if it re-emulsifies so easy, doesn't the grout itself dilute too???? HOW can you pour water and NOT? thankz
@vernonvie789
7 жыл бұрын
It's the combination of agitation and water that causes re-emulsion. You are only agitating the residual grout on the face of the tile, not in the joints so they're not adversely affected.
That looks great. But from all the comments I am confused! I am just wanting to grout small shower floor so it doesn't change color when wet
How do you dispose the dirty water from the cleaning ?
@ArmyK5Guy
5 жыл бұрын
Pietro Cannata dump it in your neighbors yard 😂
Very instructive video . Thanks !
Interesting stuff but how long will it take to do a 5 thousand sqf of quarry tile on a kitchen with that method
@adams6223
5 жыл бұрын
A 5000 ft kitchen would be wild to see.
@fightfan311
4 жыл бұрын
A crew of 4 could get it done in a couple of days
@areare926
4 жыл бұрын
If u haven't figured it out yet let me know.
@davidkuzur5186
3 жыл бұрын
Like fightfan said, at least a few guys makes it alot easier. You get a good system going and a couple days at most. A floor buffer with the white nylon pads will help immensely for roughing up the big areas as well as final cleaning at the end. Base and edges of course all need to be done by hand so I usually have a guy or two on that ahead of everyone else if possible but like a day ahead because you can't have standing water in the joints when spreading main areas of the floor. God I hate epoxy grout Lol. I know this is an old comment, this is for anyone curious enough to see the replies because they're about to do it. Have some epoxy haze remover on hand to make it easy on yourself at the end for the almost inevitable 'missed' spots.
Is it possible to leave the spread on for more hours before I clean it up?
@KizWhalifa.
Ай бұрын
No it’ll harden and you’ll be up sh*t street
Will this work after it’s dried for 24 hours?
@KizWhalifa.
Ай бұрын
You’d need to rip out the tiles at that stage
Is this easier to use than fusion pro?
@reviewage2383
7 жыл бұрын
Absolutely yes
@marcspencer800
2 жыл бұрын
@@slippinclippin1859 that’s no shit!! No epoxy is easy lol
A for effort
You tripping🤣 you just flooded the house and got a charge back bigger that your whole paycheck
@fightfan311
4 жыл бұрын
Hahaaa Nope. You only flood the part that has been smeared already
Complete lie. If you have any type of porus tile you will never get this sticky crap off
And water does nothing. Sponge fills with epoxy and turns into a rock. Terrible, terrible product.
@tagheuer02
2 ай бұрын
It's a great product
Wrong
@therealcoolio3267
6 жыл бұрын
Russell Smith Would you be able to tell me, or direct me to a video that shows the right way to clean haze from ardex? I'm considering using this grout
@Bendepriest
5 жыл бұрын
Oh you have no response?.....then you're a dumb assohlio
@fightfan311
4 жыл бұрын
Russel smith has obviously never used ARDEX WA before
Worst epoxy grout product i have ever used. Read the spec sheets. Watched the videos. AWFUL product. Avoid at all costs.
@tagheuer02
2 ай бұрын
Best grout I've ever used
😂😂😂 you smoked to much 😂😂 not 🤬 good