Don't forget to pick up yourself diesel fuel additives that adds lubricity and cetane amzn.to/3KjiOFA Diesel motor oil amzn.to/37OTVmx This is what happens when factory recommended intervals ignored kzread.info/dash/bejne/q3Z6sqdvptjWiJs.html Every car, truck and EV needs this kzread.info/dash/bejne/epOWtaaqnrbOaZM.html Maintenance mistake made by diesel owners kzread.info/dash/bejne/iXaDpNx6ZZnQpto.html Why trucks don't come with this? kzread.info/dash/bejne/mnaW3Kymc6vac9I.html How to improve lights without cutting or drilling kzread.info/dash/bejne/fWiLxK9yZ9PRnag.html How to protect paint on the vehicle without wax kzread.info/dash/bejne/e2Wa15uNo8y_csY.html

I have used Archoil for many years. No issues.

@repairvehicle

6 ай бұрын

in what?

I religiously was using Hot Shots Secret EDT and diesel extreme twice a year. My 2018 Ram 2500 was going into regen from 150 miles to 230 miles. I use it on long distance travels and rarely in the city. I thought I’d give archoil a shot. I first used the cleaner you are speaking of and it seems to have helped so far. Today was the first day I used the archoil similar to edt since I’m headed to San Antonio this Tuesday. I hoping it helps with my frequent regens. I might go back to hot shots depending on the regens. Thank you for the info you’ve put out.

@repairvehicle

7 ай бұрын

I’m at 860 miles between regen 80% highway and running this additive www.amsoil.com/p/diesel-all-in-one-adb/?zo=5257753.

@nohegalindo

7 ай бұрын

@@repairvehicle I’ll have to look into it. 90% of my 83500 miles is all Highway doing 65-80 mph.

@massfreak1

6 ай бұрын

@@nohegalindosounds like you need to clean your egr and change your ccv filter if you are in regen that much

@repairvehicle , thanks for your great videos ! What would you recommend as fuel additive and oil additive for Volvo C30 1.6 Diesel (2010) and for Volvo V90 2018 D3 Diesel , to keep the system healthy (for fuel additive) and for oil additive to prevent deposits and oil consumption. Thanks ahead!!

@repairvehicle

11 ай бұрын

Oil additives cause more damage to the engine than oil by itself. What fuels additives available in your country?

@flymilad93

11 ай бұрын

@@repairvehicle I noticed new generation engines at Volvo tend to drink quite an amount of oil with time, would you just recommend me to reduce the oil interval of 30000km (Volvo recommendation) to 15000km? (I do 30000km per year mostly highway) still using the recommended Castrol 0w20 by Volvo ? for fuel additives we have oilsyn , archoil (which you don't recommend) , liqui moly, K2 Thanks again ! :)

@repairvehicle

11 ай бұрын

@flymilad93 , I would change my oil every 10km. Liqui moly does not have any test data on their website as proof that their product actually works

@flymilad93

11 ай бұрын

@@repairvehicle many thanks :)

Biggest issue is the variances in fuels from brand to brand due to the additives put in at the refineries when loaded for each brand. Then there are differences between fuel depending on different areas around the country. Not to mention the variety of fuel tanks, pumps and filters at stations, all of which require maintenance. Poor maintenance practices, poor delivery equipment and practices all play a part in the end product.

@repairvehicle

Жыл бұрын

There is only few refineries and most of the fuel is just rebranded.

@severnsea3924

Жыл бұрын

Every vehicle is different too. What might be a "perfect" blend for one might not be so good for another. All I can say is we've used Archoil for years and have far less issues with our vehicles than we did before. This guy's testimony seems to be based on little more than a few promotional photos.

Thank you for the video! What do you think of nmf/moglide?

@repairvehicle

Жыл бұрын

in couple weeks I should be able to tell you not just my opinion but results. Don't forget to subscribe.

Any recommendations for a 2018 Mack pinnacle that they code for for injector issue. It went away and has only started rough once in the last two weeks. Want to be proactive (if not already too late) to avoid chafing out injectors too early. Truck has 400000km.

@repairvehicle

8 ай бұрын

Start with this first for the first fuel tank www.amsoil.com/p/diesel-injector-clean-adf/?zo=5257753 Then use this one every fuel tank for preventative maintenance www.amsoil.com/p/diesel-all-in-one-adb/?zo=5257753

@ThePthinker

8 ай бұрын

@@repairvehicle thank you very much!!!

@repairvehicle

8 ай бұрын

@ThePthinker you are welcome. If you have any other questions feel free to ask

What product do you recommend? I just worked 14 hours and have to be back in 6 hours. Would love to watch your whole video. I have the 3.0L ecodiesel. Can you recommend your choice?

@repairvehicle

8 ай бұрын

These are two top diesel fuel additives to use: Everyday diesel amzn.to/3MrrsEN Diesel All bit.ly/3eX55oT currently running in my Cummins

@shiningstaer

8 ай бұрын

@@repairvehicleya I would but everyday treatment bottle sucks. Amsoil it will be. I just don’t want to carry around a funnel

@repairvehicle

8 ай бұрын

can't go wrong with Amsoil.

@shiningstaer

8 ай бұрын

@@repairvehicle so I decided to watch your video? What are you trying to say? That the website is misleading?

@repairvehicle

8 ай бұрын

website is showing the actual truth about the product. You know how many companies have removed their content from website after I create videos exposing the truth about their products.

I have a 2004 powerstroke 6.0 can you suggest the optimal fuel additive?

@repairvehicle

2 ай бұрын

Best diesel fuel additive Diesel All bit.ly/3eX55oT Second best diesel fuel additive Everyday diesel amzn.to/3MrrsEN

Would you recommend this for 2003 vw Jetta 1.9 tdi.

@repairvehicle

Жыл бұрын

Did you watch video without skipping?

I’ve been using ar6200 for gas and diesel) the predecessor to ar6500 (which is for diesel only) in my powerstroke since 2016. I had similar questions in regards to lubricity the supplement provides, I did email Rick Dragos (who is now ceo of archoil) for information re: how much lubricity archoil could add to ulsd fuel. I got a reply re: ar6200- he replied with lab test pdf file. However, I cannot post link here via comment because of restrictions- i have typed in lab results below: Test/ Limits Methods Sample/ Result Lubricity, HFRR/ @ 60°C 520 um maximum (micron) ASTM D6079 /200 Curious as to any other input anyone else has…

@repairvehicle

2 жыл бұрын

This is not lab results, 520 um is microns ratings for d6079

@surebet7g

2 жыл бұрын

@@repairvehicle 200 is the result. If you search for the pdf file hffr-6200 you’ll see lab results

@repairvehicle

2 жыл бұрын

6200 is not same thing as 6500. If 200 is true result for 6200 why then it's not on their website?

@repairvehicle

2 жыл бұрын

Did you have any issues with fuel system since you started using archoil? What about time between Regen, increased or decreased? I know with one of them competitors products, powerstroke owners have noticed more often Regen due double the dose of lubricity added.

@surebet7g

2 жыл бұрын

@@repairvehicle I acknowledge they are different. Not sure if the chemistry is different as far as the lubricity is concerned. As far as not advertising the foresaid with results- one would have to ask them. There are several products on the market that do not advertise the quantity of lubricity improvment- even ford’s Cetane Booster & Performance Improver And diesel kleen to name two.

Dammmm can u do a video on hot shot secret edt

@repairvehicle

2 жыл бұрын

Yes.

Cummins is recommending Diesel Kleen to lubricate the CP4 high pressure fuel pump on their 2019 and 2020 Cummins engines. What is your opinion about Diesel Kleen?

@repairvehicle

2 жыл бұрын

I just checked ram owners manual online and it has zero information about recommending Addives for lubricity. It only recommends mopar for anti gell. Kleen website has absolutely zero information about how much it adds lubricity. Does it adds any, if it does how much? I am not convinced that Kleen adds lubricity. Any honest company will provide lubricity numbers on their website. Any company that provide numbers as a proof that their products works, I will keep buying their products. Any company that claims that their products works without providing proof, I will never purchase their products. Even if cummins recommended Kleen, I would not use kleen with their recommendation. Same cummins gave approval to use garbage cp4 pump knowingly the cp4 bad reputation .

@46fd04

2 жыл бұрын

@@repairvehicle Very good points. I appreciate you taking the time to educate all of us. To be fair to Cummins, it may have been a RAM decision to use the CP4, to save weight and save $. RAM owns the rights to this engine, not Cummins. Cummins may have told RAM it was a bad idea, and RAM did it anyways. I don't think we will ever know the true story.

@Jon-O.

2 жыл бұрын

@@repairvehicle so you know every cummins store or dealer has a power Service Diesel Kleen display and Cummins endorses the power Service brand for their fuel supplements for lubrication of injectors and pumps.

@repairvehicle

2 жыл бұрын

just because Cummins endorses does not mean you should be using it. Cummins endorses Bosch CP4 garbage pump too.

@Jon-O.

2 жыл бұрын

@@repairvehicle no that pump was all mopar decision they supplied it to cummins my dad worked at Chrysler headquarters I know alot of the people their the bean counters wanted the cheaper cp4 pump. Until they had to start replacing pumps under warranty then switched back to the cp3 in 21 I think

Im using ams oil cetane boost

Hey Brother I have two dump trucks. One has a D60 series and the other has a E7 Mack. I’ve been using AR6400-D & AR6500 on both trucks… are you recommending that I stop using these additives?

@repairvehicle

11 ай бұрын

Based on the information available on the company website I would not use it

@BigWhiteOverlord

11 ай бұрын

@@repairvehicle damn! Would you be able to recommend a brand for my Commerical trucks? I trust your expert opinion.

@repairvehicle

11 ай бұрын

@@BigWhiteOverlord what year is your trucks?

@BigWhiteOverlord

11 ай бұрын

@@repairvehicle 95 and a 2001

@repairvehicle

11 ай бұрын

@@BigWhiteOverlord , later today I will provide you a list of products to use

I want my semi to reach 1m. Currently 440k. Following

@repairvehicle

2 жыл бұрын

What are you doing from maintenance prospective to achieve this goal of 1 milion miles?

@Ramos2905

2 жыл бұрын

@@repairvehicle I'm still learning, but I do oil changes every 15k (still looking for oil I’m comfortable with to go longer, truck holds 46 quarts), fuel filters 10k, no idling, and if I have to keep the RPMs up to keep soot build-up at bay. Triple treat my fuel where it’s 10 degrees or less, proper warm-up, especially under a load (oil must be 150 degrees before pulling when under a load). I can gross 84-86k permitted year around. Adding lubricity back in the diesel (I think the sleeves like it), injector cleaner 5-6k (I pour the injector cleaner directly on the first fuel filter, a see-through one). Also, when I'm home for the weekend or week, I force regen, or ash the soot to 0% percent before leaving the truck. I don't like wet soot sitting for a long time. Change the CCV (crankcase ventilation filter, clean the soot from egr cooler, every 160-180k). And anything that causes a vacuum, I try to change it.

@repairvehicle

2 жыл бұрын

Consider doing oil analysis to see how much wear at 15k miles. Also, don't forget transmission fluid and rear axle fluids

@repairvehicle

2 жыл бұрын

Motorkote has information on their website with additive and without additive?

@hemingwayenterprisesllc8082

Жыл бұрын

​@@Ramos2905what kind engine/truck you have

Is there a particular additive you would recommend?

@repairvehicle

2 жыл бұрын

What do you have and year? Also, what are you trying to achieve with addive?

@timmylamont9959

2 жыл бұрын

I have a 2000 ford f250 with a 7.3l powerstroke and its sitting around 300k miles right now. Im just looking to get the longest life out of my injectors

@repairvehicle

2 жыл бұрын

Nice Truck! 7.3 is very good motor. For you to get longest life out of injectors, requires two things. Fuel additive is one of them. As you probably know, your fuel is not pressurized by the fuel pump, but by high pressure engine oil. Life of your injectors depends on clean lubricated fuel, fuel additives is a must. Also, clean oil is what keeps injectors firing and pressurizing fuel. Having clean oil and quality oil is one of the items that is needed for injectors to be trouble free on the long run. My recommendation is to use one of these fuel additives. These are two top diesel fuel additives to use: Everyday diesel amzn.to/3yNMZkY Diesel All bit.ly/3eX55oT Which one is the best one, both are good and work as formulated. However, cetane and lubricity numbers different between two products, final research results will be covered in another video.

@timmylamont9959

2 жыл бұрын

Yes 7.3l is arguably the best diesel international made. I really appreciate you providing me with this information, ill have to look into those two options and see which is right for my application. Thanks again, cant wait to see your new videos!

@grzegorz16100

Жыл бұрын

@@repairvehicle'' fuel is not pressurized by the fuel pump, but by high pressure engine oil''? What??

Which is recommended. Never added anything to my fuel do I start or not

@repairvehicle

9 ай бұрын

What do you have?

@timschulte499

9 ай бұрын

2011 6.7 powerstroke

@repairvehicle

9 ай бұрын

@timschulte499 if you want to prolong life of your fuel pump then you should use fuel additives

Hydrotex products all the way for me.

@repairvehicle

5 ай бұрын

Why?

This may be a good video........... if we could hear it !!!!!!!!!!!!!

@repairvehicle

2 жыл бұрын

You have hearing problems? Everyone else has no problems hearing.

@scottk27332

Жыл бұрын

@@repairvehicle What they are saying is the overall volume of the video is low, not your speaking ability, I understood the entire video just fine, I did have to turn up my PC volume control to hear it all better as compared to other KZread videos, then turn down volume when going to another channels video. Thanks for the great info I use Archoil and am happy with it but I am looking for better lubricity in my fuel system as well.

@repairvehicle

Жыл бұрын

Scott, what do you have and year?

@scottk27332

Жыл бұрын

@@repairvehicle Thanks for the reply - I have the dreaded early (May build) 2003 Ford 6.0 Powerstroke. Late last year it lost the high pressure oil pump at 223k miles and I went in and resealed the entire high pressure oil system. I went ahead and did the oil cooler, delete kit, blue spring kit, turbo drain tube, 6.4L banjo bolts and pushrods, and did a one for one head bolt to stud exchange. Using ELC rated coolant and also upgraded to all aluminum radiator. I've always used synthetic oil and OEM fuel/oil filters every 6k miles. Had to replace injectors in 2018 and last month had #5 injector solenoid fail, I replaced the solenoid only since the reman Motorcraft injectors only have 3k miles on them at best. I monitor with Torque Pro and have a separate fuel pressure gauge (I'm running high 60's) Stock ECM strategy for now (hehee) Probably too much info but there ya go! Running good and going to do some transmission upgrades soon.

@repairvehicle

Жыл бұрын

@@scottk27332 , thank you for sharing this, it’s a good information. All what you have mentioned has prevented me owning 6.0 diesel. These two fuel additives best at adding lubricity THE ONLY 2 HAVE REAL PROOF kzread.info/dash/bejne/gIqKpbeTqdTIc9I.html