In this video, I show how to create a specific circular ramp design and demonstrate methods for creating straight-run ramps.
Жүктеу.....
Пікірлер: 32
@Flamecycle1008 жыл бұрын
Good tutorial! It was good how you left the mistake in as well, I had the same problem (As I'm sure others did) and knew how to fix it because you left that in. Don't think I would have heard about the Sweep1 command without this
@fionamorgan7077 Жыл бұрын
this saved me SO much time and frustration, thank you!!!!
@SuperJoajoajoa6 жыл бұрын
The Offset Surface command should work to thicken the ramp as well
@PhilBailey6 жыл бұрын
Been trying for years to figure this out. I love you Sir. I feel like I've gladly had many semesters with you. Learned a bunch.
@winstondwayne7607
2 жыл бұрын
I realize I'm kinda randomly asking but does anybody know a good website to stream newly released series online?
@dennisleighton1068
2 жыл бұрын
@Winston Dwayne flixportal :P
@winstondwayne7607
2 жыл бұрын
@Dennis Leighton thanks, I went there and it seems like they got a lot of movies there :) I appreciate it !
@dennisleighton1068
2 жыл бұрын
@Winston Dwayne No problem xD
@utkuutkun56054 жыл бұрын
Thanks a lot. This video helped me a lot. This is quite easy.
@zinabenjelloun92904 жыл бұрын
thanks! what if the ramp was curved and not straight, how would you go on to doing it?
@NickErdman3 ай бұрын
a lot easier than i thought it would be thank you!
@drewhart74479 жыл бұрын
Thanks a lot, that helped a ton!
@dk99006 жыл бұрын
that was helpful, but what if my ramp is a ellipse and not a helix? thank you
@jcmaco4 жыл бұрын
How do you make the ramp tangent to the floors?
@susanalopez35165 жыл бұрын
hey, i need to do the same as the video but around a cone (with different radius in the helix) Is it possible?
@ahmadabdalla32116 жыл бұрын
thanks dude.... so helpful!
@nicolasvanegas8876 жыл бұрын
Good video, thanks a lot! :D
@gsutch9 жыл бұрын
Awesome mate thank you
@user-gn8rj6id7p8 жыл бұрын
awesome and thank you
@jackmead97682 жыл бұрын
probably my 25th time coming back to this video because I keep forgetting how to create ramps
@hamids45507 жыл бұрын
you can also do DupEdge
@ADAEZEworship8 жыл бұрын
Hi, just wondering, what unit are you doing this in? I'm kind pf struggling with understanding the ramp ratio of 1:12, but you mentioned a pitch of 88.
@migle25
8 жыл бұрын
+Adaeze. C says feet on the bottom left
@serxwebunazadi1860
8 жыл бұрын
+Miguel Gutierrez (migle) have you find a method to calculate this 1:12 ratio while making a ramp in Rhino ? if yes, please share with us, I have the same problem ! thanks
@invencibletheory
2 жыл бұрын
ADA not 88
@hiddentruthchannel31215 жыл бұрын
Thank You
@nathalierengifo7828 жыл бұрын
gracias!!!!
@invencibletheory2 жыл бұрын
why not just offsetsrf? instead of the manual loft?
@katarzynaaaszewska14937 жыл бұрын
You forgot about putting a landing after 6'8" of length of a ramp.
Пікірлер: 32
Good tutorial! It was good how you left the mistake in as well, I had the same problem (As I'm sure others did) and knew how to fix it because you left that in. Don't think I would have heard about the Sweep1 command without this
this saved me SO much time and frustration, thank you!!!!
The Offset Surface command should work to thicken the ramp as well
Been trying for years to figure this out. I love you Sir. I feel like I've gladly had many semesters with you. Learned a bunch.
@winstondwayne7607
2 жыл бұрын
I realize I'm kinda randomly asking but does anybody know a good website to stream newly released series online?
@dennisleighton1068
2 жыл бұрын
@Winston Dwayne flixportal :P
@winstondwayne7607
2 жыл бұрын
@Dennis Leighton thanks, I went there and it seems like they got a lot of movies there :) I appreciate it !
@dennisleighton1068
2 жыл бұрын
@Winston Dwayne No problem xD
Thanks a lot. This video helped me a lot. This is quite easy.
thanks! what if the ramp was curved and not straight, how would you go on to doing it?
a lot easier than i thought it would be thank you!
Thanks a lot, that helped a ton!
that was helpful, but what if my ramp is a ellipse and not a helix? thank you
How do you make the ramp tangent to the floors?
hey, i need to do the same as the video but around a cone (with different radius in the helix) Is it possible?
thanks dude.... so helpful!
Good video, thanks a lot! :D
Awesome mate thank you
awesome and thank you
probably my 25th time coming back to this video because I keep forgetting how to create ramps
you can also do DupEdge
Hi, just wondering, what unit are you doing this in? I'm kind pf struggling with understanding the ramp ratio of 1:12, but you mentioned a pitch of 88.
@migle25
8 жыл бұрын
+Adaeze. C says feet on the bottom left
@serxwebunazadi1860
8 жыл бұрын
+Miguel Gutierrez (migle) have you find a method to calculate this 1:12 ratio while making a ramp in Rhino ? if yes, please share with us, I have the same problem ! thanks
@invencibletheory
2 жыл бұрын
ADA not 88
Thank You
gracias!!!!
why not just offsetsrf? instead of the manual loft?
You forgot about putting a landing after 6'8" of length of a ramp.
thank youuuuuu
Si se viese el nombre del comando estaría mejor.
Slope of this ?