Hi Everyone! Is there another arcade stick out there that you would like to see custom artwork for? Comment below. Perhaps you'd like to use my design in your F500 Stick? You can find the PSD file here: drive.google.com/file/d/1ncnP8lJkyn-4Z2x0KDvJisnEChL1EJKb/view?usp=sharing If you end up posting the design anywhere, would you be so kind to link this video, and also mention the original Artist who drew the pinup girl below: ★ Pinup Girl Art ★ instagram.com/vinne.art/

@virdionp7998

3 жыл бұрын

It says that the file you have requested does not exist. Do you mind if you upload it again?

@novo1858

3 жыл бұрын

@@virdionp7998 Hi there, I editing the original comment and description with the new shared link, enjoy!

@virdionp7998

3 жыл бұрын

@@novo1858 Thanks!

@AshTheBananaLad

Жыл бұрын

I think the f300 would be cool

@novo1858

Жыл бұрын

@@AshTheBananaLad F300 is indeed cool, my friend has one. Very good for the money. The only downside is that you don't get Sanwa parts, and you don't have the plexi glass top for easy art installation. Though, you can always upgrade to Sanwa parts later, and you can have your custom art printed on a piece of sticker vinyl to attach to the top plate instead.👍

Vinne’s one of my favorite artists on Instagram, had to watch this. Awesome job dude

@novo1858

3 жыл бұрын

Yea Vinne definetly has a very cool style! Thanks!

Super cool man! Ive been looking to get into fight sticks and this def makes me want one

@novo1858

3 жыл бұрын

Thanks dude! Arcade Sticks are great, nothing beats the tactile feedback they provide, soooo satisfying.

Awesome job! great video

@novo1858

3 жыл бұрын

Thanks!

That's is pretty cool stuff. Thank you for sharing!

@novo1858

2 жыл бұрын

Thanks!

That's looks crazy bro 👌🏾 im about to put in some artwork on my gamesir c2 stick, now I know how to cut the holes.

@novo1858

Жыл бұрын

Thanks dude! Good luck, I'm glad I could help.

Very sharp!! That's a nice stick!! One thing that turned me off about the Elite is the gray edging because I like the black. But with that decal you've given me hope!

@novo1858

2 жыл бұрын

Thank you very much! And I agree it is a very strange palette, but it gave me something very different to work with for design which is great. It cerntainly makes a unique stick!

Sick!!

@novo1858

3 жыл бұрын

Thanks!

Awesome work DUDE!

@novo1858

3 жыл бұрын

Thanks man!

@user-bw7te6ye7q

3 жыл бұрын

@@novo1858 Thanks for YOU!

@novo1858

3 жыл бұрын

@@user-bw7te6ye7q hahah! :p

@user-bw7te6ye7q

3 жыл бұрын

@@novo1858 really, bro. Your PSD below video - is awesome.

@novo1858

3 жыл бұрын

@@user-bw7te6ye7q Yea well I'm happy that more people can enjoy the design! It felt weird to spend 25 hours or so; from concept to finshing touches, just to keep it for myslef ya know. I'll be posting some other arcade stick related videos soon, so you can sub if you want to see those!

Looks awesome. can't wait to work on mine

@novo1858

3 жыл бұрын

It was well worth it, you're going to enjoy it!

@c4ffeineaddict

3 жыл бұрын

@@novo1858 What size paper did you use? I made a layout but I'm not sure what to print it on

@novo1858

3 жыл бұрын

@@c4ffeineaddict Hi there, you should use the layout from the official website, then put your graphics in that. Download my design in the description as an example. I printed on 11x17 paper. But it doesn't matter what size the paper is aslong as the design fits true to scale. Good luck!

Loooks so nice

@novo1858

3 жыл бұрын

Thanks!! looks even better in person.

I just bought the Mayflash F500V2 and I will be putting on a custom art along with a colored buttons and clear ball top 🔥

@novo1858

2 жыл бұрын

Nice!!! its an awesome stick! I actually made a change since the video came out and also put on a clear buble top!

@SwagMaster824

2 жыл бұрын

@@novo1858 where did you find the template for the artwork or did you create it all from scratch yourself ?

@novo1858

2 жыл бұрын

@@SwagMaster824 You can download the blank template for the Mayflash f500 Elite from this page link: (scroll down) focusattack.com/artwork-print-and-cut-for-venom-ps4-mayflash-f500-universal/

I've been looking to replace my old hori mini fighting stick with something a little more premium... and these videos make me wanna custom build it from scratch.

@novo1858

3 жыл бұрын

Hahaha yea I also want to build one completely from scratch, but you have to find a nice shell, building from wood or something just doesn't have right feel to me. But yea being able to customize the design is a fantastic experience

@XDarket

2 жыл бұрын

Man, I really like Hori Mini Fighting Stick. I found it on 2nd hand store for 1dollar. It was great. But it diededed so I bought this one.

@antonivi8968

Жыл бұрын

Same. The best case seem to be JonyFraze’s. You can get artwork all around the stick.

That look sick dude. Wanna try this out

@novo1858

3 жыл бұрын

Thanks man, I'm still loving it till this day. Such a pleasure to play with something that looks so good.

looks good! I just got mine in the mail, i got a swirly galaxy looking one lol

@novo1858

Жыл бұрын

Nice dude! Enjoy

Pretty sick, and stylish customization, for your F-500 Elite arcade stick! I see you not only play Fighting, but also Shmups (Shoot'em ups). 😎🔥💕

@novo1858

Жыл бұрын

Thanks dude! And yea I mostly play shmups with it, one of my favourite genres these days.

@Levin_Pilot_246

Жыл бұрын

@@novo1858 me too, in fact, I was born with this genre, thanks to my family who loves obscure treasures

@novo1858

Жыл бұрын

@@Levin_Pilot_246 very cool, I played a few as a kid but never really followed the genre. But those few experiences back in the day propelled me to seek out more in my teenage years and then got addicted to them hahaha

@Levin_Pilot_246

Жыл бұрын

@@novo1858 uuuffff..... it happen just like me. However, I am more into arcade genre, rather than RPGs, dating sims, visual novels. I simply love arcade more than anything else, very quickly to understand, and getting used to it, specifically those come from retro era, such as 80s, and 90s, some 2000s as well, but those which are made the way it should back in the day. There is a indie retro game style developer named TERARIN GAMES, makes cool retro-style shmups

@novo1858

Жыл бұрын

@@Levin_Pilot_246 Yea I still like and play most genres of games, but arcade style games are just perfect when you get older and dont always have as much time to dedicate to games. Arcade games are perfect for playing in little bursts, and they keep the intensity up so you feel like you got some good gaming time in, even when its short.

Asuka 120% track is fitting here perfectly :D

@novo1858

Жыл бұрын

Hahaha I know it's such a hot track!!

@Richard Determann you will probably never see this comment, but thank you so much! Great video.

@novo1858

Жыл бұрын

Thank you, and you're welcome!

Really nice :) I would change the buttons and the stick's ball yo match the design's color scheme a bit better but that's preference

@novo1858

3 жыл бұрын

Thanks! I think they match perfectly, there are even colours in the artwork that reference the grey in the buttons and stick. But yes like you said, just preference!

Very good. I just got a new F500 elite and your design is impressive. BTW how can you cut out those circles (buttons) so perfectly?

@novo1858

3 жыл бұрын

Thank you very much. As you see in the video it's import to have a sharp exacto knife and a cutting mat. The cutting mat really helps more than you'd think, it keeps the cut smooth and prevents the paper from ripping. If you don't have the cutting mat, you could use a dense piece of cardboard from a cereal box or something. Good luck!

came here surprisingly because i recognize the artist

@novo1858

3 жыл бұрын

Nice yea he does really great work!

Nice! Thanks man. Subbed! May I ask? When printing, do you print it on the Photshop directly or saved the image as PDF then set it as A3?

@novo1858

3 жыл бұрын

Hi, Thanks! You can print directly from photoshop. But what I usually do is just a create a new photoshop file that is exactly the size I want to print, in my case 11x17" @300dpi. Then I copy the finished art into it without changing its scale, then save it as a PDF. When I get it printed I tell them to print it at 100% scale.

hi in the video the girl has this pink border and the text has shadow but when i open the psd with gimp they are not there? is this because of gimp or are they missing in the uploaded file? i love the design and would love to use it too :)

@novo1858

Жыл бұрын

Hi there! Thanks. That issue must be because of gimp, other people have used the uploaded file without any issues. Good luck!

i love that theres no tutorial on how to properly print the fucking thing out anywhere on the internet, super cool

@novo1858

Жыл бұрын

Lol! You know what, I just take that information for granted. That's a good idea for another video to help people out in this regard

@Miss_Stingray

Жыл бұрын

@@novo1858 that would be so epic, genuinely cannot wait to see it i hope. a video explaining how to use the focusattack template would be really good too, i also cannot find anything on that either and it is giving me a headache

One question, when I use the template and create my custom art, when I print it, do I have to cut the file in photoshop to fit it directly to the F500? Or do I export the file to PNG and print it as it is, with the guide and everything?

@novo1858

2 жыл бұрын

Hi there, export the file as pdf to print, and leave it the same size. Just make sure you print it on the same size of paper as the project file so it doesnt scale improperly.

Awesome vid! Btw which size screwdriver did you use for modding the F500?

@novo1858

3 жыл бұрын

Thanks!!! And its just the common Philips screwdriver head, #2 size I believe.

I dont know man this looks like a lot of work

@novo1858

Жыл бұрын

Lol, eh it's not too bad. It's worth it if you want a custom looking stick.

That's a really nice design you choose if we wanted to use your design what website did you use to print out the design?

@novo1858

2 жыл бұрын

Thanks! I got it printed at a local print shop. I'm not too sure what print services there are online. I'm sure any would work that can print it at the right size, but look around in your area for a local printer.

What was the knife you used to cut the holes. It worked so much better than what I had to do mine.

@novo1858

2 жыл бұрын

Hey there, I used a surgical knife or exacto knife. Mine was made by Olfa, but any new blade should work just as well

Hey man I just ordered my very first fight stick and decided to get a mayflash. I was wanting to definitely switch out the artwork for it so how do I go about doing that? Is there a certain website or something I need to use? Just wondering how to get a picture with the exact dimensions and such

@novo1858

Жыл бұрын

Hi there, you can download the template for the Mayflash f500 Elite from this page link: (scroll down) focusattack.com/artwork-print-and-cut-for-venom-ps4-mayflash-f500-universal/ There is also many other stick templates here: support.focusattack.com/hc/en-us/articles/207447753-Control-Panel-Templates

did you use any special type of special/thicker paper so it wouldn't rip?

@novo1858

3 жыл бұрын

Not particularly speacil paper, just standard glossy stock from a professional printer. So it is thicker than typical printer paper you would have at home

Hey man whats the name of the music playing in the background? I like these airy arcade 80s songs. Greetings

@novo1858

2 жыл бұрын

Hey dude, I'm actually using a few songs and I have them listed in the description!

May I ask where you got the template for the f500 to start the project? And also where did you get it printed?

@novo1858

2 жыл бұрын

You may, www.focusattack.com/template/download/plexworks/brand/venom/fa-venom-mayflashf500-artwork-template.zip. this is the template I used. And you can get it printed at pretty much any local print shop. Good luck!

@RetroRockGamer

2 жыл бұрын

@@novo1858 thanks!

@novo1858

2 жыл бұрын

@@RetroRockGamer You're welcome!

How do you unplug the wires from the buttons? They look fragile and are kinda hard to get off. You fast forwarded through the entire sequence with no closeup.

@novo1858

2 жыл бұрын

Hey dude, they are on there pretty tight at first, but they are quite durable. Just pull on the metal disconnect, not the wire itself. You could even use a pair of pliers to make it easier. Remember, these buttons are designed to to be swapped out and disconnected, so don't be too worried about breaking them.

Gracias amigo, buen trabajo

@novo1858

Жыл бұрын

Gracias!

Hey man where did u get that air bump? >D Thanks for the video

@novo1858

2 жыл бұрын

Air bump??? I don't know what you mean lol. But no problem for the video hahahaha. Thanks.

This is so cool! But where did you get the template for the art?

@novo1858

2 жыл бұрын

Thanks!! You can download the template for the Mayflash f500 Elite from this page link: (scroll down) focusattack.com/artwork-print-and-cut-for-venom-ps4-mayflash-f500-universal/ There is also many other stick templates here: support.focusattack.com/hc/en-us/articles/207447753-Control-Panel-Templates

@thieflord7391

2 жыл бұрын

@@novo1858 thank you!

nice! what paper did you print your artwork on?

@novo1858

8 ай бұрын

You can use anything really, but I used glossy and something a little thicker so it doesn't warp under the plexi. And 11*17 size

Ur so skilled u prolly couldve done it without that fr💯

@novo1858

3 жыл бұрын

haha thanks man. For this stick in particular you want to put the artwork under the plexiglass top plate. But the plexiglass is held in place by the buttons, so you need to remove the backplate and buttons etc... Though even if you were putting a vinyl artwork on a stick without a removeable plexiglass top plate, its best to remove the buttons so that the artwork is tucked underneath them for the cleanest result. Does that make sense?

on what paper size u printed your art? well done!

@novo1858

Жыл бұрын

Thanks! I got it printed on 11X17 glossy paper.

planning to get one soon. will a normal paper work for this?

@novo1858

3 жыл бұрын

Hi there, it's best to get something professionally printed on slightly thicker paper, but if you are able to print on 11x17 paper at home or something like that you might just have to do 2 layers to make it thick enough. Or simply put your new artwork on top of the existing one already in there. Print shops are generally quite cheap for a single print however, only a couple dollars or so.

How did you remove the button wires so quickly? I can't get them out at all

@novo1858

2 жыл бұрын

The connectors are pretty tight, so you have to pull pretty hard sometimes. Just make sure you grab the connector at the base and not the wire, and try to wiggle them a bit as you pull.

Quick question does it matter what size paper I use cause the closet size I can use is 12x18 but it’s printed for a poster cause that’s the closet I can get for 11x17 glossy paper

@novo1858

Жыл бұрын

It does not matter as long as the artwork can be printed at 100% scale on the paper. If the printer they are using can accommodate it with small margins then it should work just fine.

@theweebking5789

Жыл бұрын

@@novo1858 I know what the problem is the place I use to print doesn’t scale the art work what should I do?

@novo1858

Жыл бұрын

@@theweebking5789 I'm not quite sure what you mean, them not changing the scale is a good thing. Just create a new file at the exact paper size they will print on, and at the same dpi setting as your artwork. Then copy in your artwork and it should remain the correct scale, save as a pdf, and send to the printer. Good luck

What is the sizes for the paper you used? (On centimetres) Is it a normal Din A4?

@novo1858

3 жыл бұрын

Hi, I'm not sure the metric conv, unfortunately we still use inches for things like paper sizes over here. But I printed on 11x17" paper. But really anything that will fit the entire final image will work, if you have the stick already measure the top flate to find out.

@ivangogo2755

3 жыл бұрын

@@novo1858 Thanks you man

@novo1858

3 жыл бұрын

@@ivangogo2755 you're welcome!

Make a video on the HKT-7300 please? :)

@novo1858

3 жыл бұрын

haha oh boy, what a legendary stick. I will definitely have to make video on them in some capacity in the future!

what is best controlar for kof 2002

Love this artwork!! Would you be willing to share the .psd file?

@novo1858

3 жыл бұрын

Hey man, sorry for the late reply. After thinking about it, yes I don't mind sharing my design! You can find the PSD file at this link: drive.google.com/file/d/1ncnP8lJkyn-4Z2x0KDvJisnEChL1EJKb/view?usp=sharing If you end up posting the design anywhere, would you be so kind to link this video, and also mention the original Artist who drew the pinup girl at instagram.com/vinne.art/

@javierortiz82

3 жыл бұрын

@@novo1858 thanks for sharing, I was about to ask for the template to make my own but I'm not very good at photoshop to begin with, I'm thinking about buying some colored buttons and the iconic red ball for the stick because I find the gray too boring lmao.

@novo1858

3 жыл бұрын

@@javierortiz82 Hey your Welcome! I designed the artwork specifically around the grey buttons, trust me it looks really good with the artwork in. And its also pretty unique to have grey buttons. But at the same time I know what you mean, to me the classic arcade colour layout is the "SEGA Green and Pink" from their Candy cabs. I'd recommened going with something maybe subdued if you can find it. Light blue or pink to matcht he art? Or just do whatever the hell you want lol.

@javierortiz82

3 жыл бұрын

@@novo1858 I was thinking about a color array like the classic MVS machines (Red, Yellow, Green, Blue), still, I'm just thinking about it, any updates I'll make sure to show them off lol. Thanks a lot.

@novo1858

3 жыл бұрын

@@javierortiz82 Sounds good!

Where or how do you make the artwork you all already have it printed out.

@novo1858

3 жыл бұрын

Hi there, you can make the digital artwork in a program like Adobe Photoshop, and you can get it printed at any print shop really.

Did you print this yourself or get it done at a shop

@novo1858

Жыл бұрын

Hey there, I got it printed at a shop

Question lol so how do i check the art or file i picked on the website? And does this stick work on xbox one?

@novo1858

3 жыл бұрын

You mean the file I hosted on the google drive? Its a .PSD file so you need Photoshop or another program like it to open the file. And yes im pretty sure the Mayflash F500 elite works on the Xbox One.

@michaelmorgan2880

3 жыл бұрын

It works you just have to plug a controller into the usb in front

what do you think about the fightstick itself? it is in competitive grade?

@novo1858

2 жыл бұрын

Hi there, I really like the stick. It's very comfortable, feels very premium and the fact that it works with so many consoles gives it a ton of versatility. The buttons and lever are all competitive quality for sure, official Sanwa parts. I have seen around on some forums that this stick may have a little bit more input lag then some other solutions out there, but personally I have not noticed it. I use the stick on my 360, PS3, PS4, switch, PC, and Mister FPGA device. The cool thing is that it's so easy to customize so that you can always swap out the PCB for a Brooks board in the future if you want the best experience.

@upsidedownhorror

2 жыл бұрын

@@novo1858 excellent im not sure if buy this or the hori RAP V www.amazon.com/Nintendo-Switch-Arcade-Hayabusa-Officially-Licensed/dp/B01N4P40LG/ref=sr_1_1?crid=BQO8SZ19HUWL&keywords=hori+rap+V&qid=1655275489&sprefix=hori+rap+v%2Caps%2C135&sr=8-1 wich doesnt has sanwa parts anyways...have you tried the mayflash f500 elite with online fighting games?

What about the skin for the home and turbo switches

@novo1858

2 жыл бұрын

That could be cool, I usually like to keep my buttons plain. But that might be something I could look into for my next one!

What size & kind of paper did you print that on? I want to customize my f500 elite as well :D

@novo1858

3 жыл бұрын

Hi there, you can find the template I used for layout from: focusattack.com/artwork-print-and-cut-for-venom-ps4-mayflash-f500-universal/ It's a Photoshop file with instructions in one of the layers. It is already sized correctly, but i printed mine on 11x17 glossy paper. Just check with the printer you go to, check that the paper is around the same thicknes as the artwork already in there and your good. One tip I have for you when designing, is to look up some examples of custom designs for inspiration and layout ideas. Alot of the time less is more, and lastly make sure any images you use are high enough resolution, otherwise it will look blurry. Good luck!

@brussell7760

3 жыл бұрын

8.5 x 14 will do

@novo1858

3 жыл бұрын

@@brussell7760 That should work, tight margins but yea.

tutorial on how to make the artwork template?

@novo1858

2 жыл бұрын

You can download the template for free from here! focusattack.com/artwork-print-and-cut-for-venom-ps4-mayflash-f500-universal/

Hello! Any tips removing the ball? I'm struggling with it, looks like its not gonna get out forever

@novo1858

Жыл бұрын

Hey! Just use a flathead screwdriver on the backside of the stick, like I did in the video @3:08

@nokuga6731

Жыл бұрын

@@novo1858 Even used the box cover as a flathead so maybe its the model (venom)

@novo1858

Жыл бұрын

@@nokuga6731 you still can't get it?

@nokuga6731

Жыл бұрын

@@novo1858 nah, like its really hard, me and my friends (who are experienced at modding sticks) tried it with flatheads but nothing, i dont know if mayflash did this on purpose or my arcade stick is just like this

@novo1858

Жыл бұрын

@@nokuga6731 that's crazy! Never heard of that before, though I know they can be really tight from the factory. I don't think it's on purpose, as these stick are meant to be modded and such. Maybe try heating the lever shaft a bit with a hair dryer, and get something like a rubber oven mitt to grip the ball top with, to add some extra mass for a better grip and more leverage.

Sir is this applicable to mayflash f300 elite as well?

@novo1858

2 жыл бұрын

Hi there. I do not think the F300 Elite has a plexi glass top, so you cannot simply put a piece of art work in it like the F500. However, you could still add a custom vinyl sticker to the control plate.

What kind of paper when you print your skin just a nornal bond paper?

@novo1858

3 жыл бұрын

Hi there, just 11x17" gloss stock from a local printer, nothing fancy.

@nixietyy

3 жыл бұрын

@@novo1858 Thank you so much!

@novo1858

3 жыл бұрын

@@nixietyy you're welcome!

You get that F500 to work on Guilty Gear Strive beta ps5?..

@novo1858

3 жыл бұрын

Not sure, don't have a PS5.

I don't get it. Why use the scissors when you have an x-acto knife?

@novo1858

3 жыл бұрын

Well, sharp good scissors actually make a cleaner cut because there are blades cutting from both sides. Surgical knife blade cuts are sometimes ugly on the back side. Also I'm just good with scissors lol, anything will work.

@irregulargamer1352

3 жыл бұрын

@@novo1858 fair enough

What is the name of the paper material? I'm from Mexico.

@novo1858

6 ай бұрын

Hi there, just use a glossy thicker stock paper. Nothing special, just make sure it's the right size. I used 11X17".

What type of paper did you use?

@novo1858

3 жыл бұрын

I printed mine on 11x17 glossy paper. Just check with the printer you go to, check that the paper is around the same thicknes as the artwork already in there and you're good!

@symonmyls9247

3 жыл бұрын

How about the size of the artwork?

@symonmyls9247

3 жыл бұрын

@@novo1858 Don't really have and know how to use adobe, but i want custom artwork on the mayflash f500 elite, getting it soon. New to fighting games as well.

@novo1858

3 жыл бұрын

@@symonmyls9247 This is a great project to learn Photoshop with! Its pretty easy to learn, particularly for a project as simple as this can be. Just figure out a way to get ahold of photoshop (torrent) and then look up some tutorials of the basics here on KZread. You can also download the artwork template from this link: support.focusattack.com/hc/en-us/articles/207447753-Control-Panel-Templates Good luck!

@symonmyls9247

3 жыл бұрын

@@novo1858 Thanks for your help man.

Hey, long shot here but is there a way I can pay you to cut this out for me? I'll even pay for shipping. I don't have the tools to do this but I really really want this lmao

@novo1858

3 жыл бұрын

Hey there, I could possibly do this. To make it worth my time I would charge $50 USD to get it printed, cut it out, and cover me for the time it takes to figure out shipping etc.. But then I'm not sure how much it would cost to ship, as I would have to send it in a tube. It could be as much as $30 for shipping, I'm not sure. Does that still interest you?

Can you send me the full stick art work

@novo1858

2 жыл бұрын

Hey, there's a link in the description to a Google drive download of it.

Who's the girl?

@novo1858

2 жыл бұрын

Its supposed to be a "tactical" rendition of Sailor Saturn, from Sailer Moon.

Is it ps5 compatible?

@novo1858

2 жыл бұрын

I haven't tried it myself, but yes apparently it is compatible with the latest firmware!

bro i'm so afraid to open my f500 and messing something up

@novo1858

2 жыл бұрын

Hey man, it's actually very simple and straight forward. Just make sure you take a picture of it as soon as the bottom panel is off so you have a reference for how everything will go back together. Just watch the video a couple times, and maybe a video or two on how arcade sticks are wired. You can do it!!!

@jhx97

2 жыл бұрын

@@novo1858 thanks for the fast answer and the encouragement, i really appreciate it!! :) can you recommend me a video about arcade stick wiring?

@jhx97

2 жыл бұрын

@@novo1858 i mean, to know how arcade sticks are wired

@novo1858

2 жыл бұрын

@@jhx97 Hey no problem. This video seems like a pretty good explanation kzread.info/dash/bejne/g2Wm1LKAYcTgd9Y.html. Each button has a positive and negative wire, and the board the wires are connected to is labeled with the corresponding button assignment. As long as you take a picture of it before you start taking it apart, I am very confident anyone could put it back to together. These devices are also meant to be taken apart and modified, so don't worry too much about breaking it. Just take your time.

@jhx97

2 жыл бұрын

@@novo1858 bro I'm kinda panicking here, the wires of the buttons are extremely tight and i can't remove them! I'm afraid i might end up damaging a cable D: what do I do?!?!

U didnt really have to take out the back did u

@SiBai-

3 жыл бұрын

it seems like he did since he needed to remove the buttons in order to take off the plastic plate, and he could only do that if he disconnected the wires to the buttons.

@novo1858

3 жыл бұрын

@@SiBai- Correct.

Please gift it to me 🙏😊

Whos that girl?

@novo1858

3 жыл бұрын

I didn't draw the girl, but it is fan art of Sailor Saturn for the show Sailor Moon.

@woozy1885

3 жыл бұрын

@@novo1858 that's sailor moon??

@novo1858

3 жыл бұрын

@@woozy1885 Sailor Saturn, but a tactical re-imagining

@woozy1885

3 жыл бұрын

@@novo1858 thanks

Bruh you traced everything with an exacto knife, but then switched to scissor and obliterated your precision

@novo1858

2 жыл бұрын

Hmmm no not at all dude. Those are some really nice art Fiskars scissors that I sharpened before cutting. It's more accurate to cut straight lines with a pair of good scissors than a blade alone.