Tysm

Hey! Does taking the carburator lid off make changes to the top speed or overall just performance?

@latzkoworks

19 күн бұрын

Hello, with more air + more gas the engine'll be stronger, so yes, the top speed'll increase.

@Mokibulla

18 күн бұрын

@@latzkoworks okay, is the carb going to automatically adjust the air/gas ratio that it doesnt get too much air?

@latzkoworks

18 күн бұрын

​@@Mokibulla you must replace the main jet in an opened carburetor to at least a 0.65mm innear diameter one.

@Mokibulla

18 күн бұрын

@@latzkoworks ohh okay, thanks for the tips. Last question, does ”atleast mean, that i could go bigger and it wouldnt have any problems? Or do you only suggest something around 65?

Thank you for this video. I have the same scooter and it runs perfectly but has a very hard time starting. I takes 10-15 seconds of electric start cranking to start with full throttle, doesnt start if the throttle is not all the way. Any ideas why?

@latzkoworks

Жыл бұрын

Hello, it should easy start without gas when the engine is cold and the choke works good. If you had to give a full gas at cold, that means, that the engine receives too much gasoline, and with the opened throttle you give more air. It could be a worn needle jet. When the engine is running, you do not notice a leaking needle walve, only when the engine is stopped, a few gasoline could leak into the engine.

@mirooo94

Жыл бұрын

Thank you that makes sense. Do you know how to check if the needle jet is worn? Yes when i start the scooter the engine runs pretty well but the cold start is very hard. Maybe i can change the position of the needle jet let more air in? I was thinking to check and adjust valve space but not sure if that will help.

@latzkoworks

Жыл бұрын

Sorry I was wrong, not the needle jet, the needle valve! With the damaged needle valve can get the engine too much fuel. You can see dismounting the needle valve at 04:00 in the video.

hi,one question, black pipe from airbox where is she conected on other side,on my moped its not coming, and i am litle bit confused ?

@latzkoworks

Жыл бұрын

Hello, not connected anywhere, just being under the bottom cover, other side is open. There comes the air in to the airbox.

Also i saw you went from 53 to 65 is that because it was running lean? Or due to starting issues?

@latzkoworks

Жыл бұрын

There was a metal plate in the carb intake, if you take it out, you should increase the main jet.

@mirooo94

Жыл бұрын

That makes sense! Does it mean you will waste more gas and fill up gas more frequently or is it so small of a change that you wont notice a difference with fuel efficiency?

@latzkoworks

Жыл бұрын

If you take out that metal plate, the carb'll get more gas. The more gas needs more fuel, so should increase the main jet.

Hi I have a ay50 (same engine and everything) with a aftermarket eBay sports exhaust and the brass plate removed what jet do I need roughly as I have a 72,75,78,80,82,85

@latzkoworks

Жыл бұрын

Hello, I suggest the 0.75 first, after running check the spark plug (black / brown / white), if it is brown and the engine runs well with full gas it is okay.

Hello I am French , I would like to know where the carburetor tank rod (the one at the bottom of the carburetor)

@latzkoworks

Жыл бұрын

Hello, the pipe on the bottom of the carburetor leads out the too much fuel to the air.

i have the same scooter and i make this all same but they don’t start,what is problem?

@latzkoworks

Жыл бұрын

Have you checked the spark, and the compression in the cylinder?