Impressive that people can learn this from home, good job man! Explained it well, valves will always be the only thing I’ll leave for the garage to do.
@Subliminal31172 жыл бұрын
I'm here early! Keep up the good content :D.
@BigBoyzToyz1974
2 жыл бұрын
Cheers Philip. Come back in an hour it will be 4k hd then 😂😂👍
@Subliminal3117
2 жыл бұрын
@@BigBoyzToyz1974 btw Have your rear brake and gear levers become loose? Check my latest video, it is quite weird and I wonder how to tighten them
@BigBoyzToyz1974
2 жыл бұрын
Ok bud 4mm Allen key on the front looks like a 10mm spanner for the nut on the back but just use a pair of pliers 👍👍
@stevedelaney99122 жыл бұрын
Hi, have you released the next video on this valve timing adjustment? Also, would you be able to show a video of removing the head? To check piston and valve cups?
@BigBoyzToyz1974
2 жыл бұрын
No not yet I had to put it back together as I use it for my daily work horse but it’s on the cards as I need to give mine a top end service very soon..👍 but I might be going big bore 166 so will do that video as I tear it down.
@fijiarc2090 Жыл бұрын
Whats that green fluid coming out of the crankcase cover?
@skinnypearson Жыл бұрын
Hi, Just found your videos after buying an RS4 125, 2015. Great vids, will def be doing some work myself now. Can you tell me, what mirrors did you have on your RS4 125? I think mine are stock, and are useless, yours look much better.
@BigBoyzToyz1974
Жыл бұрын
Hello Ashley thanks for the feedback. Mine were also the original mirrors bud so not sure what kind you have 🤔
@skinnypearson
Жыл бұрын
@@BigBoyzToyz1974 Ah ok, will have to see if I can pick up a set 2nd hand. Thanks for the reply.
@roberts4208 Жыл бұрын
Heyyy so how do you adjust them like unscrew and then tighten it back up????
@BigBoyzToyz1974
Жыл бұрын
No unfortunately you have to use shims. It’s abit of a pain as you have to take out your old ones to see what size they are then buy ones to adjust accordingly 👍
@fijiarc2090 Жыл бұрын
How do I know if I need to adjust and change my valve clearance though?
@BigBoyzToyz1974
Жыл бұрын
If after you have checked and there not in tolerance. Usually loss.of compression they are to tight and not closing properly or rattle in top end and performance low too lose and not opening enough to get a full cycle of fuel and restrictions on exhaust valve.. not 100% but off the top of my head I think exhaust is 0.25mm and intake is 0.15mm but quick google search will tell you.
@CT9904-CT4 ай бұрын
Also just out of curiosity, I have the SX125 with same engine! What mileage did you do your first valve clearance?
@thatrx125
2 ай бұрын
Every 6k kilometers
@BigBoyzToyz1974
2 ай бұрын
The book says at 6 months (3700 kms) then every 12 months or 3.7k Kms..
@thatrx125
2 ай бұрын
@@BigBoyzToyz1974 i tought that its 6k km, but thanks Do you have a tutorial on how to adjust the valves or can you give me the link to one (ik that it needs the shims)
@rejaulripon3160 Жыл бұрын
hello sir can you help me please, what is the valve clearance intake or exhaust size in aprilia sr 150
@BigBoyzToyz1974
Жыл бұрын
No idea...Google it 🙄
@batcaveracing Жыл бұрын
Who often should the valves be checked
@BigBoyzToyz1974
Жыл бұрын
From memory I think it’s every 6000 miles
@tylermason48422 жыл бұрын
Ignition box is what u didn’t know what it was mate x
@BigBoyzToyz1974
2 жыл бұрын
Coil pack I’ve always called them I was very poorly when I recorded this in my defence 😂😂👍👍
@jhz10502 жыл бұрын
Hi mate do you know how to reset the aprilia rs4 ecu?
@BigBoyzToyz1974
2 жыл бұрын
Just take battery terminals off for about 20 mins is the easiest way (turn ignition on after disconnect) 👍
@jhz1050
2 жыл бұрын
@@BigBoyzToyz1974 thanks mate
@jamesharbor79812 жыл бұрын
Can’t you pivot the tank all the way back to the rear seat
@BigBoyzToyz1974
2 жыл бұрын
No it will put too much pressure on the pivot but if tank is empty you could but I wouldn’t recommend 👍 don’t use the D.I.D chain 😂😂
@fijiarc2090 Жыл бұрын
9:03
@almlee13092 жыл бұрын
You really unprofessional
@BigBoyzToyz1974
2 жыл бұрын
Not a professional channel. But gets the job done.
Пікірлер: 34
Impressive that people can learn this from home, good job man! Explained it well, valves will always be the only thing I’ll leave for the garage to do.
I'm here early! Keep up the good content :D.
@BigBoyzToyz1974
2 жыл бұрын
Cheers Philip. Come back in an hour it will be 4k hd then 😂😂👍
@Subliminal3117
2 жыл бұрын
@@BigBoyzToyz1974 btw Have your rear brake and gear levers become loose? Check my latest video, it is quite weird and I wonder how to tighten them
@BigBoyzToyz1974
2 жыл бұрын
Ok bud 4mm Allen key on the front looks like a 10mm spanner for the nut on the back but just use a pair of pliers 👍👍
Hi, have you released the next video on this valve timing adjustment? Also, would you be able to show a video of removing the head? To check piston and valve cups?
@BigBoyzToyz1974
2 жыл бұрын
No not yet I had to put it back together as I use it for my daily work horse but it’s on the cards as I need to give mine a top end service very soon..👍 but I might be going big bore 166 so will do that video as I tear it down.
Whats that green fluid coming out of the crankcase cover?
Hi, Just found your videos after buying an RS4 125, 2015. Great vids, will def be doing some work myself now. Can you tell me, what mirrors did you have on your RS4 125? I think mine are stock, and are useless, yours look much better.
@BigBoyzToyz1974
Жыл бұрын
Hello Ashley thanks for the feedback. Mine were also the original mirrors bud so not sure what kind you have 🤔
@skinnypearson
Жыл бұрын
@@BigBoyzToyz1974 Ah ok, will have to see if I can pick up a set 2nd hand. Thanks for the reply.
Heyyy so how do you adjust them like unscrew and then tighten it back up????
@BigBoyzToyz1974
Жыл бұрын
No unfortunately you have to use shims. It’s abit of a pain as you have to take out your old ones to see what size they are then buy ones to adjust accordingly 👍
How do I know if I need to adjust and change my valve clearance though?
@BigBoyzToyz1974
Жыл бұрын
If after you have checked and there not in tolerance. Usually loss.of compression they are to tight and not closing properly or rattle in top end and performance low too lose and not opening enough to get a full cycle of fuel and restrictions on exhaust valve.. not 100% but off the top of my head I think exhaust is 0.25mm and intake is 0.15mm but quick google search will tell you.
Also just out of curiosity, I have the SX125 with same engine! What mileage did you do your first valve clearance?
@thatrx125
2 ай бұрын
Every 6k kilometers
@BigBoyzToyz1974
2 ай бұрын
The book says at 6 months (3700 kms) then every 12 months or 3.7k Kms..
@thatrx125
2 ай бұрын
@@BigBoyzToyz1974 i tought that its 6k km, but thanks Do you have a tutorial on how to adjust the valves or can you give me the link to one (ik that it needs the shims)
hello sir can you help me please, what is the valve clearance intake or exhaust size in aprilia sr 150
@BigBoyzToyz1974
Жыл бұрын
No idea...Google it 🙄
Who often should the valves be checked
@BigBoyzToyz1974
Жыл бұрын
From memory I think it’s every 6000 miles
Ignition box is what u didn’t know what it was mate x
@BigBoyzToyz1974
2 жыл бұрын
Coil pack I’ve always called them I was very poorly when I recorded this in my defence 😂😂👍👍
Hi mate do you know how to reset the aprilia rs4 ecu?
@BigBoyzToyz1974
2 жыл бұрын
Just take battery terminals off for about 20 mins is the easiest way (turn ignition on after disconnect) 👍
@jhz1050
2 жыл бұрын
@@BigBoyzToyz1974 thanks mate
Can’t you pivot the tank all the way back to the rear seat
@BigBoyzToyz1974
2 жыл бұрын
No it will put too much pressure on the pivot but if tank is empty you could but I wouldn’t recommend 👍 don’t use the D.I.D chain 😂😂
9:03
You really unprofessional
@BigBoyzToyz1974
2 жыл бұрын
Not a professional channel. But gets the job done.
@Twinkletoes78
Жыл бұрын
Let's see your videos