Excellent detective skills, sir. Thank you for posting this up.

Well I’ve just taken the carbs off for a good clean for the fourth time and it is still popping and spluttering at 4000 revs, unless I put the choke on and then she’s off like a banshee. I’m going back in the garage in the morning and will check for the plug 🤞 Great video. Thanks.

Your patience is an asset but experience helps tremendously. Well done keep up the good work. I enjoy your chanel.

@pete3204

5 жыл бұрын

William Sinclair cheers mate , thank you .

Really helpful video I’ve just bought a 98 pegaso today and it has this problem I’m just about to go up the shed and try this out

Had the same problem. This video will help me. I did the factory 2.5 turns will dial it to 4.5 turns and measure the resistance in the ohms. And clean the choke thing. Mine didnt like being stored over the winter with 95 leadfree that has E10 10% etanol. Now all cleaned up changed gaskets and orings running on 98 oktan starts on the button but must have choke so will do the 4.5 turns and i think this will sort out the issue. Thanks again for this video 👍Dealership here in Norway qouted me £1500 to clean and set up the carbs! Robbing barstools. Done it all myself abit of a job getting the carbs off lol dismantled the thing so many times now i can do it in my sleep. I love the bike Great sound and a Great sitting position🏍️

@pete3204

Ай бұрын

good luck my friend, yes they are a great bike , £1500 lol. dealer prices are a joke !

Thank you so much for this video. I've gone mad from the bogging down on starts this week.

@pete3204

Жыл бұрын

you are welcome mate

Thanks so much for this. Had exactly the same issue on my 1994 Pegaso 650. I’ve had the head off and shimmed valves, carb off countless times. I watched you’re vid, blanked it off and sorted the issue. So chuffed! Cheers

@pete3204

4 жыл бұрын

Paul lane great news mate , sounds like you put some major work into trying to solve the problem, glad the vid helped you . pete

This was an exiting vid! I have same problem on my funduro. My bike is stored away now, but I will definitely check out this solution! I hope this is the problem, because I have had this problem for a year and nobody can sort it out.

Got a similar problem on my f650. After about 5 miles it pops on hard throttle, then settles down. Suspect a coil pack or lead, but will change them ( bought some second hand ones to try) and new Iridium plugs. If that fails it's time to check the carbs. Very useful video. Thanks.

@FlopySVK

Жыл бұрын

Hi, Can you tell me, it works? I have the same problem with my pegaso

Omg, thanks for the video, mate! It turned out my BMW Funduro 650 carb had the same missing plug issue! So thanks also from the BMW family :)

@pete3204

5 жыл бұрын

Jurģis Jurkāns you are welcome my friend, glad it helped you out :)

@faster4tec

3 жыл бұрын

The plug I think should lead to a long solid tube (vacuum) that went to an accessory chain oiler. My F650 had one, would occasionally run like absolute crap and thats what it was. Melted a piece of plastic into the end of it. Been fine for 4 years/50k since!

Thanks so much for your upload. It's really helpful. I've got a suzuki DR800 with the same carb, and have similar problems. Went the same diagnostic route (including the coils) and am similarly frustrated about not being able to run the bike for weeks (!)...

Excellent video thanks for the help, my motor runs perfect but when the bike is going to temperature the stationair is getting lower that it almost wants to shut off.

Thank you a loot for this video help me a lot, my Aprilia runs like a new bike!! THANKS A LOOOTT

@pete3204

4 жыл бұрын

UL Fishing Junkies you are welcome, thank you pete

Super helpful! Thank you. I’ve just bought a non-running ‘97 bmw f650 with similar carb setup. You might have saved my some hair ripping out. I’ll keep an eye out for that air passage and the fixed pilot (not sure if the f650’s had that, too).

Thanks for the video ; help me out a lot with mine same problem backfiring on F650 st

@pete3204

3 жыл бұрын

glad you got your bike sorted :) pete

I have just finished restoring a 1994 Pegaso,had exactly the same symptoms as yourself,had them on and off the bike but then I found you video,had a check on mine and my heart dropped the tube was still there but i remembered you said it was a plug,mine had a pipe from the open entry (where the plug should be)round to the same sealed entry on the second carb where I found the pipe not attached,removed the pipe and sealed the open entry as you did and the bike runs as sweet as a nut,thanks pete

@pete3204

5 жыл бұрын

PETE WAINWRIGHT I,m glad this vid helped you solve your problem, I could,nt find the information I needed , so I made this vid to help the pegaso family out.. thanks for your feedback. cheers :)

@petewain61

4 жыл бұрын

Hi,my pergaso is sorted due to your advice but I’m now interested in the resistor you talked about,can you give me anymore info on it,thanks

@souf900

2 жыл бұрын

Can you explain what you mean with plug and pipe? Because mine has the plug showed on the video but stills not running good

@souf900

2 жыл бұрын

@@petewain61 its running good on idle, the jets where clothed. The only problem now is the carb settings, air fuel screw 4 1/2 right? And the idle mix screw? And i see also that my peggy is only running with choke fully on. I replaced by the wat all the rubbers.

Thanks for that, will try this soon

Thank you, i was thinkin to give up on my Pegaso 650 Cube 2000 of this Carb problem

@pete3204

3 жыл бұрын

you are welcome mate !

Hi Pete - after many months of trying to figure what was wrong with my 2000 pegaso i came across this video. Bike had been running well but started to run really rough as revs increased. Cleaned carbs and checked all ignition system all ok. Jets all clean no issues. Watched video and went to check for missing bung. On mine there was a thin open tube running along my top sub frame from the carb outlet. This was supposed to act as some sort of vacuum pipe for a chain scottoiler system that had been removed leaving an open pipe. So going to seal it up and retry - I will post my results - fingers crossed.

@pete3204

4 жыл бұрын

i would think that would be your problem, hopefully it will be . good luck ! let me know how it goes. cheers pete

@paolomaimonePIOLO

3 жыл бұрын

Ciao,anchio ho lo stesso problema,guardando il video al minuto 6,28 per renderti conto come si spegne,io non ho ancora capito quele' il problema,non ostante abbia lavato e pulito i carburatori e rimesso su,ma quando la accendo ritorna lo stesso problema,volete dirmi cose' ?????

@alexmig4181

3 жыл бұрын

@@paolomaimonePIOLO ciao, io ho una f650st e sto cercando di ripararla. Non sono sicuro neanche io, ma dal video mi sembra di aver capito che quel "tubo" nero che lui aggiunge in realtà è un tappo, tu l'hai tappato e comunque hai lo stesso problema?

@bulamalaya

3 жыл бұрын

I'd be interested to know if it was this open pipe was indeed the issue, and sealing it off made your bike run better.

@glennryder77

2 жыл бұрын

Well - after all this time just to update you all that asked - this hasn't sorted my problem - the bike is still sat in my garage waiting to be fixed. I will persevere and let you know if it ever runs right again.

Thank you 😊

Hi, thnx for the video! Is it possible to change the ignition cable on this coil? It screws in into the coil the same way it does into spark plug cap? What's the best method to start this bike wen hot? Throttle, no throttle, choke, no choke?

Pete, thanks for your video- you given confidence to go tackle my own carbs now.

@pete3204

3 жыл бұрын

glad the vid helped you .good luck mate !

Could you elaborate on the spark restrict or, is it not for the redline/ignition cut. Mine is an F650, which is mostly same engine, but 4v head instead of 5v, and then twin spark plugs instead of the 5th valve. But everything else much the same. Never had a spark issue, it goes very gentle on its spark plugs, never really had an issue. About to rebuild carbs again (needles will be worn from a lot of miles) and spotted that jumper/resistor sat on the plug. Haven't measured it yet, you say 'restricted' is 4ohm, and full is 9ohm?

thank you very much for this video, I managed to start it but the engine dies without a shock, what could it be?😢

Hi, just trying to do some research on the Aprilia as I’m thinking of buying one, do you think you might be able to give me your opinion of it please? Thanks

Did you unscrew the screw 4.5 turns when fully screwed in?

4 1/2 turns on the idle jet due to the blocked off pilot jet. I'll try that later today. My AP has the exact same carbs I was wondering why these pilot jets were blocked. I've been working on my bike on and off for 9 months.

COLLEAGUE, WHAT DID YOU PUT ON THIS BOX WHERE HE SHOWED HER AND WHAT WAS IT USED FOR

I have just tried to start my peg after sitting outside all winter. Not getting fuel through so I am going to be in the same position. Clean it all down then start working through it.....

Hi Pete. But inside you turned the adjustscrew 4,5 times and let it sit right?

Thanks bro for this Video

@pete3204

7 ай бұрын

you are welcome my friend !

che silenziatori sono?

Hi Pete, Small question, can you tell me which specific resistor you have put on? Is it a 9Ohm or 9K Ohm? Thanks!

@stephenmcqueen4029

3 жыл бұрын

He said 9.5 ohms

Why so 650 pregos exhaust get red hot after idealing 2 min

Hi Pete, how reliable is this bike. I am looking to buy one.

Hi,pete I had the same problem as you,I contacted you thanking you for your help,can you remember the air screw settings,I think the standard settings make the bike run lean,any help would be great,regards pete

@pete3204

4 жыл бұрын

R Sole try turning the airscrews out four and a half times, this compensates for the smaller jets..good luck

@rsole486

4 жыл бұрын

pete3204 lovely thanks again,pete

@SkywalkerTibor

3 жыл бұрын

Actually they are not airscrews but right the opposite, they are fuel screws. Factory setting of them is 3 turns out. For mine one that's the perfect tune, neither lean nor rich.

Tuve el mismo problema y tardé tres semanas en darme cuenta, hasta saqué el motor para hacerle las válvulas

@paolomaimonePIOLO

3 жыл бұрын

Ciao,anchio ho lo stesso problema,guardando il video al minuto 6,28 per renderti conto come si spegne,io non ho ancora capito quele' il problema,non ostante abbia lavato e pulito i carburatori e rimesso su,ma quando la accendo ritorna lo stesso problema,volete dirmi cose' ?????

See this guy, and note the red plug on his mikunis kzread.info/dash/bejne/lmqOpbWoqc2dktI.html What is that small pipe for, though? It's all well and good blocking it off, but Mikuni made it for a reason. This is very similar to the BMW F650 I have and, as you say, good bike when running, but they can be a pain in the arse tracking a fault down when running badly. Voltage regulators, batteries and even the plug caps on the BMW can cause problems.

hi quick question do you still have the bike? also how did you get the carbs out did you have to split the frame? many thanks

@pete3204

4 жыл бұрын

take the rear panels off , undo the exhausts etc , take the two bolts out at the top front of the subframe, then push the subframe back , there is enough room to get the carbs off. good luck !

@pete3204

4 жыл бұрын

yes i still have the bike

@paolomaimonePIOLO

3 жыл бұрын

@@pete3204 Ciao,anchio ho lo stesso problema,guardando il video al minuto 6,28 per renderti conto come si spegne,io non ho ancora capito quele' il problema,non ostante abbia lavato e pulito i carburatori e rimesso su,ma quando la accendo ritorna lo stesso problema,volete dirmi cose' ?????

Aprila moto 650 boggs back and the fire get off

Русскии