I realize this is an older video, but in all of the years I have been in the body shop, I have never had to remove the grill on these trucks in order to remove/replace the headlights.

Thank you. I wish they could give awards for tutorial videos, because this was precise, included everything needed to to do a similar project on my own, and nothing more. I replaced my headlights in 30 minutes with no issues because of this video. I'll be on the lookout for Anzo products in the future because of this video.

Thank you.. very helpful... you make a good video explained everything.. from star to the end..

very helpful video ,,thumbs up

Thanks 👍 it's being really helpful how you explain everything thanks alot for your help,may God bless your life happy New Year 🎉 keep up the great work

@anzousa

Жыл бұрын

Thank you, Have a great New Year yourself!!

I bought similar lights a few months ago for my '09 GMC. My LED lights are horizontal between the low and high beam and parking lights. I like the vertical pattern these have. I wish I would have seen this sooner. My only complaint on these lights are the turn signal lights are nowhere near as bright as the O.E.M part because the dark finish. As far as the disassembly, those grill clips aren't as easy to remove as you show so I didn't unfasten them. I didn't remove the 10mm bolt from under the light because it is difficult to get your hand in there. With the grill in place and the bottom bolt in place, you just have to be a little more careful and maneuver and angle it differently and it will slide into place. Overall, your demonstration was great.

can i use any type of light bulbs with this set up or does it have to be a the same type that come with it?

exellent video. one question. would the hid light work on these headlights?? i jist bought them

Can you replace the low beams with LED’s? Or are you stuck with running halogen bulbs?

Do you have any side by side comparisons of the OE and the replacement beam pattern?

I have a set of u bar lights but they have a red and black wire on the back is the wire to power the u bar part of the light

Great video! as someone else already asked... what kind of wheels??

Can you be able to change the light bulb for a LED

Nice truck. What kind of lowering kit did you use or is it air ride? What size tires/rims did you use? Thanks.

where can i get LEDs for the low and high beams i cant find them anywhere

Sokleen's truck 💯

led tail lights...need the right part # for a 2005 gmc Sierra led tail light...

Im looking for new bulbs where can I find them

Changing a headlight on this truck seems like a big pain in the but. I know you would have to take the housing off to change it.

Anyone know after market replacement low beam bulb part number and type name? Need help parts place can't find bulb part number

No need to loosen grill. Light comes right out. The bottom bolt just loosen it. No need to take all the way out

These fit great and look great but you cannot adjust them up enough to safely use on the street. I emailed the company about it but I guess they don't care enough to email me back. Don't buy them unless you have a light bar or something that you can drive with.

Would an opt 7 H11 led bulb fit into the low beam housing?

whats the price on those head lights?

Wow it was much easier on my 2005 I might just leave my 2011 stock

could you replace the h7 and h1 with the stock 9006and h11

@blainederouen9977

5 жыл бұрын

I wish I could've used the H11 bulbs in the new lights. I had just replaced them 6 months before. I've already had to replace one of the H1 bulbs. Hope it doesn't happen too often, those bulbs are nearly $30 a piece. The days of replacing a headlight for $5 are long gone.

Having trouble with the driver side running light going out

@Zodiac_510

4 жыл бұрын

Did you ever replace it? Mine is doing the same rn but the right side and idk if to buy a new LED light

Would i be able to put HID's in these?

@JeremyRed

7 жыл бұрын

Clay Kuerbis yes you just need a different bulb style

Don't forget about the 2 10mm on each side after the 7/32 . They're a beyatch

@PimpTwzt

5 жыл бұрын

No, those are not supposed to be removed. You are just making it a million times harder for yourself. Those two hold on the bumper clip. It makes for easy install/removal. Most cars/trucks come with this similar setup now days. Take the two small 7mm ones out in the wheel well and give the bumper top a good tug and it comes off.

How much is LED lights

Curious This is the same light as an 09 avalanche correct? Does anyone know if the avalanche has that main wire connection too?

@anzousa

Жыл бұрын

That would be incorrect. The 09 Chevy Avalanche has the same headlight as the Chevy Tahoe and Chevy Suburban not a GMC Sierra

@etp_23

Жыл бұрын

@@anzousa ok do you all have any videos on those ? Do you happen to know if it's a single plug on those as well?

@anzousa

Жыл бұрын

@@etp_23 there are pictures of the connections on the AnzoUSA.com website. Thank you.

Where pay

WHY a projector light another brite lite coming at me they are always too high there are real measurements in inches which are correct not just willy nilly

So why won't they adjust properly? I just installed a set and the adjuster will not bring the lights up to a safe proper level! They are dangerous to drive. I like the install video but no where is there a headlight aiming video that can cast any light on why they will not adjust properly!

how much are they

@blainederouen9977

5 жыл бұрын

I was going through the comments and saw yours. I bought mine on E-bay for $140/pair.

Can I get it without the ubar styling and LED'S as I Don't like to try and look like everyone else.

Would be nice if someone would load up a video of them at night and the visual of the road

@blainederouen9977

5 жыл бұрын

The low beams are just as bright as the original part. I find the high beams are much brighter.

Visibilty is horrible for these. Little to NO adjustability. Didn't actually realize till after purchase that they use SMALL foglight bulbs for low and high beam. My factory fog lights with leds disperse more light than these light assemblies. (Strictly for show.)

@anzousa

Жыл бұрын

Try to contact techsupport@anzousa.com? There are some things that can be checked on the product.