Yes make sure you keep your face shield on while inspecting the weld that’s one thing to look out for because that slag be poppin like 💥 😂
@oneidea1121
Ай бұрын
That was exactly what I was going to say, those things like to aim at your face😂
@asadgull6306
Ай бұрын
and when it stuck in your knee back while layering 😂😂😂
@prod.bycudda4767
24 күн бұрын
Or the neck@@oneidea1121
@lc2583Ай бұрын
Keep a mich tighter arc than you would with low hydrogen rods, and drop the amps by about 10-20% depending on position
@brianpierson7708Ай бұрын
Alky unit shutdowns back in the day. Also offshore I don’t mind them as long as they shorty rods. I use a good bit of 309’s around the house on things.
@shaunking7345Ай бұрын
Good rods man love the things verticle up welds are tricky but so good man
@Shaker626Ай бұрын
308 is also a very good rod for joining dissimilar or unknown steels. Almost always gives a beautiful bead!
@alecreents4159Ай бұрын
Smooth like butter, I didn't know what to expect at first, but then I dialed it in. It was gorgeous
@richwood865016 күн бұрын
Only once to repair a hydraulic ram. Worked when finished.
@lepersonanongrata521Ай бұрын
Never welded 308 but I have welded 309. Definitely an interesting Rod to use.
@welderdude1Ай бұрын
I do often with refrigeration trailer repairs. Mostly 309l.
@-Evo
Ай бұрын
That’s for welding carbon steel to stainless steel.
@welderdude1
Ай бұрын
@@-Evo yes.
@maxrpm2215Ай бұрын
Sick, as long as your Amps are spot on it flows great.
@darrenthomas9602Ай бұрын
Awesome I love them running 316 on the regular also stainless steel flux core mig wire absolute game changer
@frankvqz3799Ай бұрын
Yeah and I love it
@kristofinakamati6599Ай бұрын
Yeah
@tchindastallone3531Ай бұрын
You just need to hold a steady electrode travailing speed, also hold a close arc length and avoid over run of the beads during the welding of the pipes
@drec7366Ай бұрын
I have many times😊
@user-er7jb1mu7xАй бұрын
Love it stick and tig was my favorite
@Nick-ut7tiАй бұрын
Wear a respirator
@Borderweldingservices
Ай бұрын
Yeap, don’t breathe that in. Tig as well needs to be well ventilated!
@TheOneAndOnlySameАй бұрын
Yep. And they are easy AF
@nathkrupa3463Ай бұрын
Great
@ronaldherbert9201Ай бұрын
What about a video with an uphill SS on a pipe ?
@ronaldherbert9201
Ай бұрын
SS Stick .
@samuelmartin2608Ай бұрын
I just drop my heat down a little and go slow back and forth, get a nice stack of dimes.
@XxAviciiLevelsАй бұрын
Keep a tight arc on a root pass..ok everything else you can long arc it and watch the rod "drip" into the puddle.
@israelnieto2147Ай бұрын
I don’t trust the puddle it’s deceptive and the slag shoots at you
@latoyahorton4137Ай бұрын
I don’t like stick for some odd reason 😂
@user-cu9is1db7zАй бұрын
Damn I didn’t even know that existed I thought it was only GTAW
@morgandixon9401Ай бұрын
Don't trust your puddle
@donavincaballero5976Ай бұрын
We use em for our precast welding jobs i like it sucks they are not magnetic to make it an easy clean up
@ryanmcintosh6714
Ай бұрын
If the floor is clean first this works well. Cut some floor polish wax with acetone like 10:1 and dip your push broom in it. Dont let it soak or youll melt the bristles. Let it dry. Should be sticky and pick it all up. Dip the broom in HOT water and it all comes off. This works with aluminum chip also.
@robertblackshear8963Ай бұрын
The older they get they become useless unlike many other rod types.
@michaelholmes8350Ай бұрын
Messy and looks like crap..use tig with 5/32 filler rod
@skylerfleenor709Ай бұрын
That stuff doesn't behave at all. Almost have to long arc it, and the rest is spray and pray. One second its going where you want it to, and the next second it's folding over and leaving a void like an ex clearing out your joint checking account. Do not recommend.
@wrecker1861
Ай бұрын
Yet everyone else here has somehow figured it out…
Пікірлер: 40
Yes make sure you keep your face shield on while inspecting the weld that’s one thing to look out for because that slag be poppin like 💥 😂
@oneidea1121
Ай бұрын
That was exactly what I was going to say, those things like to aim at your face😂
@asadgull6306
Ай бұрын
and when it stuck in your knee back while layering 😂😂😂
@prod.bycudda4767
24 күн бұрын
Or the neck@@oneidea1121
Keep a mich tighter arc than you would with low hydrogen rods, and drop the amps by about 10-20% depending on position
Alky unit shutdowns back in the day. Also offshore I don’t mind them as long as they shorty rods. I use a good bit of 309’s around the house on things.
Good rods man love the things verticle up welds are tricky but so good man
308 is also a very good rod for joining dissimilar or unknown steels. Almost always gives a beautiful bead!
Smooth like butter, I didn't know what to expect at first, but then I dialed it in. It was gorgeous
Only once to repair a hydraulic ram. Worked when finished.
Never welded 308 but I have welded 309. Definitely an interesting Rod to use.
I do often with refrigeration trailer repairs. Mostly 309l.
@-Evo
Ай бұрын
That’s for welding carbon steel to stainless steel.
@welderdude1
Ай бұрын
@@-Evo yes.
Sick, as long as your Amps are spot on it flows great.
Awesome I love them running 316 on the regular also stainless steel flux core mig wire absolute game changer
Yeah and I love it
Yeah
You just need to hold a steady electrode travailing speed, also hold a close arc length and avoid over run of the beads during the welding of the pipes
I have many times😊
Love it stick and tig was my favorite
Wear a respirator
@Borderweldingservices
Ай бұрын
Yeap, don’t breathe that in. Tig as well needs to be well ventilated!
Yep. And they are easy AF
Great
What about a video with an uphill SS on a pipe ?
@ronaldherbert9201
Ай бұрын
SS Stick .
I just drop my heat down a little and go slow back and forth, get a nice stack of dimes.
Keep a tight arc on a root pass..ok everything else you can long arc it and watch the rod "drip" into the puddle.
I don’t trust the puddle it’s deceptive and the slag shoots at you
I don’t like stick for some odd reason 😂
Damn I didn’t even know that existed I thought it was only GTAW
Don't trust your puddle
We use em for our precast welding jobs i like it sucks they are not magnetic to make it an easy clean up
@ryanmcintosh6714
Ай бұрын
If the floor is clean first this works well. Cut some floor polish wax with acetone like 10:1 and dip your push broom in it. Dont let it soak or youll melt the bristles. Let it dry. Should be sticky and pick it all up. Dip the broom in HOT water and it all comes off. This works with aluminum chip also.
The older they get they become useless unlike many other rod types.
Messy and looks like crap..use tig with 5/32 filler rod
That stuff doesn't behave at all. Almost have to long arc it, and the rest is spray and pray. One second its going where you want it to, and the next second it's folding over and leaving a void like an ex clearing out your joint checking account. Do not recommend.
@wrecker1861
Ай бұрын
Yet everyone else here has somehow figured it out…