This printer sounds amazing! I’m glad you did this video to explain the firmware update.

@Original-Werks

10 ай бұрын

Glad it was helpful!

You know how to give a review! Thank you 🙏🏽

@Original-Werks

Жыл бұрын

Glad it was helpful!

Really appreciate you sharing this....I get my 6k tomorrow...so looking forward to using it!

@Original-Werks

Жыл бұрын

Happy this helped. You will really enjoy it, the detail it can print is Amazing!

The 'very nice adjustable feet' at 3:50, well I had 1 foot screwed in, 2 loose in the bottom of the box a large hole had been ripped in the plastic overwrap where the fourth foot had exited. Have to use cardboard to hold up 1 corner.

@Original-Werks

10 ай бұрын

I would certainly get in touch with customer support, that sound like a shipping issue.

awesome

@Original-Werks

Жыл бұрын

Thank You!

Being locked into a specific slicer is exactly why I decided to pass on Elegoo. I was happy with everything I saw and on the verge of buying one, until I finally saw that.

@Original-Werks

Жыл бұрын

Yes, having options for different slicers is helpful.

I just got this and use black plant based resin and my print stuck to the vat film. Excited to get some advice. My fep film was cloudy after I cleaned it wrong. My screen protector application failed because of some stupid dust that got on the screen after I cleaned it. Now have the firmware update and am waiting a few days for new screen protector and fep film. I also did not mess with the z shim at all.

@Original-Werks

Жыл бұрын

Ok, remember that I am a noob at resin printing as well. I certainly recommend waiting for a screen protector. As I mention in the video it has already worked its magic already for me. The plant based resin, all I can say is that you may want to check your exposure settings again and be certain that they are not too long. Also make sure that you are homed to the proper height as well. I would recommend finding a resin calibration file that you like and test exposure times. I have done that for most of the resins that I have been using, it really helped. Below is a pretty good one to use, doesn't use a lot of resin and prints fast. www.thingiverse.com/thing:4707289 I like using the PTFE dry lube that I showed in the video, any brand should work. It does make a difference in the resin sticking to the FEP sheet. If I don't use it, I can hear the difference. No popping when the build plate rises. It also clears up a cloudy FEP sheet for a while too, sort of fills in the scratches. The "Z" shim you can leave alone if you did not put on a flexible build plate. I would have left mine alone, but I could hear a slight difference in the stepper motor when it came down to the screen that I didn't like. I hope this helps, don't get discouraged with your printer, once you get it dialed in you are going to really enjoy using it! I certainly do not have all the answers, remember that I am new at resin printing too. Check out the Facebook group for this printer, Anycubic has one specific for the PMX6K.

@hand8007

Жыл бұрын

@@Original-Werks Thanks so much. I was watching the video for awhile got about half way then country reception when out on data and I just got home and sat down. Waiting about 5 days and going to try again. My main disappointment was the test file didn't work out of box which is meh I shouldn't have been so go ho and made sure I did everything fort and re uped my research. But it's already great seeing a more up to date review or step by step of this printer. But your slower and longer showed cleaning process was really helped. I think I didn't watch as many people clean vats as I thought and just completely bombed this part.

@hand8007

Жыл бұрын

Dammit reading this now and realized how much of a mess autocorrect made my sentences.

@hand8007

Жыл бұрын

@@Original-Werks I tried to get the exposure test but it stuck.

@Original-Werks

Жыл бұрын

Have you tried using just a basic grey resin? Might be easier to get exposure times right. Is your printer in a temperature controlled environment? Resin printers need to be at comfortable room temperature.

Hello, what do you do after washing with alcohol wipes, just took it and threw it in the trash?.

@Original-Werks

Жыл бұрын

I throw them into a 5 gallon bucket and let them evaporate out. This is of course in a small shop/studio, you may want to do something else if you are in a living space. The resin that is left is minimal. Then I dispose of them. With now having a wash station, my waste should be very minimal. I will be using a very small amount of paper towels. Have Fun Printing!

If I want to do hollow, what wall thickness do I have to set? In case of smoothing

@Original-Werks

Жыл бұрын

That is a tough question to answer. So many variables - model size, resin type, amount of detail, what it will be used for, orientation of the print itself, this also leads to the suction and draining of model as well. I would suggest printing a small part comparable to what you want for wall thickness, or even better print a small test portion of your final planned part. This will give you something to smooth and test your finish on. Sorry, hard to give a very clear answer, your question did not give me much information to go on. Good Luck!

What the size of magnatic plate .? I want to buy it full kit

@Original-Werks

Жыл бұрын

202 x 128mm most that I found did not have the 6K in description. I ordered one for the mono x (same build plate size) and it fit perfect.

Not sure what I'm doing wrong but the update files don't download in .bin format. They are downloading as .rar format. Not sure what to do now. Can you give any advice? Love your videos.

@Original-Werks

Жыл бұрын

I did a fresh download of the PMX6K firmware on both my MAC and a Windows computer. The MAC automatically converted the .RAR file back to a .BIN file, my Windows computer left it as a .RAR file. For Windows users it seems that you may have to find software to convert the file from .RAR to .BIN. I found one named 7-Zip that should work, please let me know if this works.

@ipadre

Жыл бұрын

@@Original-Werks Thanks. I'm on a Mac. Will try again on another computer.

@ipadre

Жыл бұрын

@@Original-Werks For anyone else who is having this problem,I just downloaded RAR Extracter and Expander from the App Store free and it converted. Thanks again. Love the videos. I also purchased Nomad at your recommendation.

@Original-Werks

Жыл бұрын

Very happy that you found a solution. The firmware allows anti aliasing to work with all the slicers. Layer lines are virtually invisible on your prints with the PMX6K. Enjoy!

What size flex plate do I need for this the unit is on the way and it will be my very first 3d printer and I want to get everything I need thx

@Original-Werks

Жыл бұрын

202 x 128 mm I picked one up for about $15.00 on Amazon. Most will have something referencing the resin printer model name or size.

@briannettles786

Жыл бұрын

@@Original-Werks will that ANYCUBIC mono x 6k work with 3rd party software like lychee I’m brand new to this and Amazon delivered it yesterday it came in broken so have to send it back for a refund and now I’m questioning between the same thing or Saturn 2 8k just want user friendly unit thx

@Original-Werks

Жыл бұрын

@@briannettles786 It will work with Lychee, Chitubox, and the native one it ships with (this one works with anti-aliasing the best) Lychee and Chitubox both support anti-aliasing as well. Sorry to hear yours arrived broken. Have fun printing whichever way you go!

Doesn't it come with a screen protector on it that's an extra I believe, or atleast that's what I was told cause I didn't put one on. And I just got mine like a week ago

@Original-Werks

Жыл бұрын

Seems to be some confusion over this. I have read that some come with it pre installed while other machines do not. Mine did not appear to have one yet, so I installed it. I did not want to peel the light leak tape back to double check. The screen protectors are much cheaper than a screen. I would rather waste a spare screen protector than my light screen. If you have any doubts, install it. I already saved my screen once because I missed a drop of resin on the bottom of my vat that cured to the protector. Luckily it scrapes off of it easily. Enjoy your new printer!

Great way to spened 2 and a half weeks to print a three cent part

@Original-Werks

Жыл бұрын

Yes, sometimes it feels just like that!

Do you have the link to purchase this or the plate?

@Original-Werks

10 ай бұрын

I do, it is in the description.

Im sorry I'm going to tell you all the truth here. I bought this thing and played with it for 3 days. It can't print for SHIT!

@Ninjakebab

Жыл бұрын

Sounds like user error

@Original-Werks

Жыл бұрын

I am sorry to hear that you are having problems. There are so many variables to contend with. I myself was discouraged at first, not understanding how to properly support models. Good Luck, unless there is something seriously wrong with your printer, it should print well for you.