Thank you for the tutorial it’s really helpful

@AnsysTutor

4 жыл бұрын

Thanks🙂🙂🙂

Hi, can you please tell me how to display the centerline curve inside the helical coil?

Grateful

@AnsysTutor

Жыл бұрын

Thanks

so helpful, thank you a looooooooooooooooote

@AnsysTutor

2 жыл бұрын

Thank you for your comment.

great tutorial .will you please tell me how to draw a straight pipe through this spiral pipe and connect this spiral pipe with this straight pipe??Thank you.

@AnsysTutor

3 жыл бұрын

Use the loft option that might help you

thank you for this tutorial, sir can u do heat transfer between curved pipe wall to aluminum epoxy wall with CFX?! if u do that I will appreciate that so much sir

@AnsysTutor

5 жыл бұрын

wiil try to do a tutorial on this in CFX

hi .. please can you insert circular fin around the helical tube? and how can i repeat this fin along the helical coil?

@AnsysTutor

4 жыл бұрын

yes it can be inserted but the meshing will be much difficult.

@bahaulddink3121

4 жыл бұрын

@@AnsysTutor can you do a video about it for me please

hi! if possible can you do a tutorial on a solid-liquid flow or solid-liquid slurry flowin a simple pipe?

@AnsysTutor

7 жыл бұрын

Will try to do it soon.

@asharmd2001

7 жыл бұрын

thanks:)

@asharmd2001

7 жыл бұрын

Hi ! Is it possible to do solid-liquid flow or solid-liquid slurry kinds of flow in fluent? Because one of my friends said that we can only work with DPM AND Particle tracking, the current models in Fluent cannot easily simulate macro-solid slurry. Is this true?

nice video... why does velocity at outlet become zero ?

@AnsysTutor

6 жыл бұрын

Due to large pressure drop in the helical pipe.

Hello Sir Thanks for the tutorial Can you share the specs of your system or can guide us about cfd hardware. I'm going to build i9 10900k 10C/20T, 3.7-5.3 GHz. Will, it works fine?

@AnsysTutor

2 жыл бұрын

Yes, it would work fine. My system configuration is lesser than yours.

My graph is not converging and it's going parallel in range to 10e-4 if I am doing upto 1000 iteration also

@AnsysTutor

4 жыл бұрын

It's OK, if the iteration vs residual plot is going parallel. You can now proceed for the results.

What is the function of the shell conduction layer?

@AnsysTutor

5 жыл бұрын

shell conduction layer creates the materials virtually and calculates for that.

Hey, I have been trying to do the same as shown in tutorial but at 15:30 min when I tried to display my pipewall, the design always vanishes from the screen every time and can't be located in the screen. Please help me with this problem

@AnsysTutor

6 жыл бұрын

Try to use "fit to screen option" .You can find this icon in a cube inside a magnifier icon,near zoom,drag icons.

@kishantiwari9683

6 жыл бұрын

I have tried the option but still nothing happens. Everything else is going fine as calculations, iterations etc. Any other thing that I can try?

@AnsysTutor

6 жыл бұрын

Ok, leave it. Its not necessary, i have created it in the tutorial just to show how fluent solves during iterations. You can get the results for the problem without this.

@kishantiwari9683

6 жыл бұрын

Okay but there must be some solution to it. Can I have your mail Id for any further communications with a snapshot of my problem as I cannot post any pic here.

@kishantiwari9683

6 жыл бұрын

Thanks for your awesome tutorials. I have learnt a lot from them.

Can you resend this video, because I need this video please, Because this video is only 2 minutes long😓

@AnsysTutor

4 ай бұрын

It was an error from KZread, the issue has been resolved please check now.

@MAKADEMIA312

3 ай бұрын

Thank you very much❤

Good tutorial.. it will be better if sound available

@AnsysTutor

7 жыл бұрын

we are providing the detailed description and procedure in the video by help of text inputs .If have any doubt in any video then please feel free to ask any doubt or help. and thank you for the suggestion we will try to improve it in future.

@Markks100

7 жыл бұрын

Which software did u use in creating the helical pipe geometry? Ansys or Solidworks?

@AnsysTutor

7 жыл бұрын

Hi.please go through the tutorial, u can able to create the geometry in ANSYS design modeler itself.

How to analyse wen geometry is imported having 3 starts for fluid flow

@AnsysTutor

5 жыл бұрын

3 starts means 3 inlets?

@santoshdivate5397

5 жыл бұрын

@@AnsysTutor hmmm. It is swirled nozzle having 3 starts for fluid flow

@AnsysTutor

5 жыл бұрын

yes you can do this, just create the profile and sweep along the line.

@santoshdivate5397

5 жыл бұрын

@@AnsysTutor tq. I ll try