Try my easier methods first! kzread.info/head/PLj-NNNuq2EubrEaawjL89LsM5NLaxVQke

@mesiroy1234

3 жыл бұрын

What tools I need to access the inside of Xbox

@ole4252

3 жыл бұрын

@@mesiroy1234 No special screws, Just little X

@randomretroplays3123

2 жыл бұрын

Love your explanation of the green thing 👍🤣

@brunoob-1

2 жыл бұрын

Is that link for joiners only? Because its unavailable for me

@rishaudthomas6133

Жыл бұрын

I’m not able to open the link in the description.

New Fix stick drift. Everyone meet up at Microsoft and dump all the controllers at the front door.

@MidnightSkullWolf

Жыл бұрын

Yes I agree you know how pissed thay would be

@Jimmy-1919

Жыл бұрын

​@@MidnightSkullWolf not as pissed off as I am. I've swapped out this same little stupid disk 3 times over the last couple months only for it to end up drifting in a different direction

@MidnightSkullWolf

Жыл бұрын

@@Jimmy-1919 Lmfao Oooooof

@Jimmy-1919

Жыл бұрын

@@MidnightSkullWolf hahah yep, definitely miss me Playstation

@MidnightSkullWolf

Жыл бұрын

@@Jimmy-1919 I grew up on PlayStation but I turned to Xbox

I've now fixed 5 of my remotes that were in my storage. Thank you SO much

@TinkerManMick

Жыл бұрын

Thats awesome!!

@wicho99w99

Жыл бұрын

So just replace them? No need to do a calibration or anything else?

@boshboshbosh1

Жыл бұрын

​@@wicho99w99they're standardized to Xbox I doubt you'd have to calibrate them

@FardMaster99

9 ай бұрын

​@@TinkerManMickdoes opening the teal blocker harm the prongs at the bottom of the pedentiometer?

@CountYourDaysCandyCadet

8 ай бұрын

@@FardMaster99if you do it too many times you’ll probably snap it off, but as long as the solder and contacts don’t either touch or break off you’ll most likely be fine.

These manufacturers need a class action lawsuit for these because EVERY SINGLE dang Xbox Controller I've bought (Elite Series II, Power A, Base Wireless Series X Controller, and Walmart Wireless Series X Controllers)all get stick drift. I work out and have strong hands but I baby my controllers and after 2-3months; Bam another one.

@nighthawkviper6791

Жыл бұрын

Yet my Stadia controller still doesn't have stick drift and I played Destiny 2 for over 1500hrs on it... 😂

@barcodedemon4463

Жыл бұрын

big corps know this, trust me give it 5 years maybe even less and the right to repair will literally be abolished. Pair that with all the new high tech things like phones, drones, consoles, controllers all have their own little defects that the manufacturer knows are prevalent in their product, but they just know us as a consumer can’t do much besides give in to their tactic and buy a 70$ controller from them directly. Honestly gonna say screw it and just learn a bit of fixing and repairing so i don’t have to be a puppet to all these company’s since there is a good amount of fix it channels out there with good tutorials.

@haydenmckinney5173

11 ай бұрын

my og xbox controller never had it lmao it jus bc they use cheap parts

@angelsaucedo2231

10 ай бұрын

LMAO "Fun fact I work out" "I know its a mechanical well recorded issue that happens to everyone but maybe it happens to me just because im too strong" bro....humble down..

@C-army_Recruiter

7 ай бұрын

To fix it they have to invent a completely new piece or go back to older software. The controller lasts 5-7 years but the module that reads the stick movement only lasts 3-15 months. Its an issue with all controllers cause they all use the same kind of module, every brand of any play station, xbox, pc and nintendo controller uses this piece. Xbox 360 and old playstation controllers lasted much longer before drifting so I think they should go back to that set up. But they cant do much to change it. The options are very limited and this was the lesser evil. A good thing is xbox is becoming a lot more compatible with mouse and keyboard, which is a different system than sticks so we can avoid this issue all together. From what I have learned its that the module burns out, literally, it slowly burns until the metal is non conductive in areas. If you replace one check to see if the metal piece on it is brown or black. That would just show that it burns the metal over time, just like how a silver pizza pan becomes bronze or brown with use. When you do this as as soon as you notice drift effecting game play, even if minuscule, and replace the module then it wont start effecting anything past it and youll have a controller for a long time. Its an investment. 5 bucks a year tops and about 2 hours of your time a year to avoid spending an hour a year to go get a controller for 60 bucks is well worth it. I have 6 controllers and 3 game players in my house so I replace this piece far more. It only takes me 15 min now to open a controller and replace this piece, and its only 10 bucks a year (cause I buy in bulk). Well worth it in my opinion. I highly recommend learning it. Ps: test the controller stick before you screw the plates back on all the way (use with plates on even though its not screwed on so you don't touch the electronics when they are running) Another ps: start by using an air can to clean dust first, sometimes that's the only issue. GL 😊

This is better than the last stick drift fix video

I repaired this way a lot of controllers.

@joelh3030

2 жыл бұрын

I saw a video of a guy who completely desoldered the entire unit off the motherboard, This is so much faster😂

@Umbra_The_Wolf

Жыл бұрын

No way

@HD-wf3bp

Жыл бұрын

Is this a part made for this fault or the same is in other Controllers? Can you only fix it with this part or also with another controller?

@Umbra_The_Wolf

Жыл бұрын

@@cuethefart41 ty

@night5738

10 ай бұрын

@@joelh3030me too thank god I found this one first cause I was about to buy a soldering kit 😂

The washer (moving piece in the middle) can wear out, and the hub (the black piece inside the casing) can get scratched up from the wear and tear. If you do not see any scratches then you don't need to remove the hub. If you aren't careful and bend the springs on the washer, it might make the drifting worse with calibration malfunctions.

@xav10

4 ай бұрын

I replace the washer only with a new one. It gets worse.

I had my PS4 for about 7 years before I upgraded to a series X, in those 7 years I abused it like hell, let it dust away, got water on it, etc, and never once did the PS controller give me any problems, 3 months into getting my series X and taking care of it like if it where my child, the controller starts drifting, cmon Microsoft

@joshuasykes4817

Жыл бұрын

It's not just Microsoft thing Sony and Nintendo are just as guilty by same standards. PS5 controllers are having the same issue and also switch controllers. It seems like PS4 and Xbox one and previous controllers never had that issue. Dont know why these newer one have problems with stuck drift. Still use my Xbox one controller I got in 2013 on my series X still works like a champ!!

@sethford30

Жыл бұрын

​@@joshuasykes4817 I've had stick drift on PS3, PS4, Xbox One, and Xbox Series X. I may just be bad with controllers lol but last gen definitely had issues with it as well

@Trapful

Жыл бұрын

​​ @joshuasykes4817 facts man I still have my og xbox one controller from 2013 no drift but I'm on my 5th series x controller smh

@nighthawkviper6791

Жыл бұрын

​@@Trapful Get the Power A from Walmart with the $5 Warranty and just send it in everytime it starts to drift. Learned the hard way with my Elite Series II and OG Series X Controllers. MY MAN HANDS DESTROY THESE SUBPAR CONTROLLERS.

@Trapful

Жыл бұрын

@Nighthawk Viper crazy thing is I've took my controller apart several times and replaced the disk things for the analog sticks with the powerA ones and haven't had a drift in months

The funny things is you don't always have to replace it. Just clean it. I took mine out cleaned it and put it back in. Works fine again.

@The_Post-apocalyptic_Few

Ай бұрын

@jhnyjoejoe69 I just tried that and it didn't work for me

@jhnyjoejoe69

Ай бұрын

@@The_Post-apocalyptic_Few yeah it only lasted a few days then it started to fail again. These controllers suck. The OG 360 ones were easier to fix.

@The_Post-apocalyptic_Few

5 күн бұрын

@jhnyjoejoe69 yeah I clean the crap out of my ps5 controller fixed it for about 2 weeks then the drift was back I just said the hell with it and bought a controller from Walmart with a 2 year replacement plan doesn't matter the reason I can replace it

This works. Bought a used series s super cheap. Controller had the drift. This worked perfectly. Thank you.

Xbox arent here to sell games. They're here to sell controllers.

@jbliggidy123

21 күн бұрын

@@leeandrew6555 xbox has GAMES?!

That green thingy is called a potentiometer

Where's the link to the part you said would be in the description? Need to know what to get.

@XenHat

Жыл бұрын

in the description. this is the comments section. on mobile you can access the description with the 3 dots at the top right corner of the player

This worked on one my controllers, but the other one is now clicking and the drift is not fixed

This is my favorite fix. I just took the old one from my other controller and its good as new. I tried cleaning it out like 10 times and it didnt work, as soon as i put the other piece it and back together it was perfect. Deadzone back to 0

Worked for me !! I just switched both of those things in the other module and it work, thx you ! ( It work for Astro C40 )

I just fixed my stick drift by doing this.. Thank U sooo much!!❤️❤️

So what I've been doing is sometimes its the analog stick itself that is causing the drift... I'll leave the 2 green potentiometers in and replace the stick... It requires soldering 4 mounts and 4 smaller pins for the R3 or L3 button... BUT since you aren't necessarily messing with the potentiometers, you have a much better chance of being dang close to zero when reinstalling the controller.

@dmaskell92

Жыл бұрын

The potentiometers are the only thing picking up faulty movement. The sensors are made of graphite and every console manufacture (literally all of them) should be sued for selling faulty goods.

@night5738

10 ай бұрын

@@dmaskell92so they just wear out over time no matter what and need replaced like this?

IMO we all need to group together and file a class action lawsuit against these companies for making such crappy analog sticks

i thought the carbon track on the actual "green thing" (a potentiometer) was what needed to be replaced and that the metal wiper was just that, a metal wiper? Im assuming if this works then the Pot wasn't too bad and a simple cleaning might've fixed it. cleaned it with a little BW-100. i could be wrong though

You can also saturate it with isopropyl alcohol, and then regrease with a dielectric grease.

Have you tried the usual solution for fixing potentiometers, like volume controls on music players, etc? Get a can of contact cleaner, and squirt a little bit onto the track of the potentiometer. Then turn it back and forth a load of times. Often fixes it unless the thing's really worn away to nothing. But usually it's just dirt and skin oil.

I can confirm this piece is the issue. My dualsense had what seems to be the standard left stick left drift and i fixed it by removing the piece and wiping it off with a dry q tip and reinserting original pieces and had absolutely zero pull now.

I’ve found that this method only works in some situations. Usually what wears away is the thin black layer in the green plastic part, and replacing the part in the video doesn’t fully fix the problem.

i was wondering why nobody was just swapping those out instead of the whole damn stick

I think its actually the graphite pad (green part) that gets destroyed by the metal rubbing on it. you can temporarily fix it by cleaning it.

not only that you have too fix the black circle rubber pad thing on the green cover too .

@RB3Gaming

Жыл бұрын

How

I did this using the my old controller that wasn't powering on for parts. Worked perfectly after wards

What’s the link for that part

Yeah I eventually just got a gamesir hall effect after having to resolder so much

For anyone wondering be careful when doing this, if you don't have much stick drift I would not do this because it might not fix it and if you don't know what you are doing you will likely make it worse

@johnnyhuginson9816

6 ай бұрын

Exactly what i jus did on my scuf impact what is the name of the part i need to order

Of course I’m being biased, but G.O.A.T. video of 2022.

Why did you break off the ost analogue holder, which is located above the microswitch?

thank ya legend

What if for me, it goes up or down and gets stuck... and I replaced it with the circle from the other one but unfortunately it still doesn't work allright : /

I got a third party controller, and the joysticks are good (for now) but the R2 and L2 triggers are only responsive at the very end. So things like racing games or other ones where you want to be able to only halfway depress the triggers are not easy to play. Is there a way to change the programming or sensing on the triggers?

Would this fix my drifting? My analog dosnt stick but when I’m in a menu etc it just keeps moving as if I was holding it or the stick was stuck

I have never had stick drift until EVERYONE started talking about it. Yall jinxed me lol

Doesn't the wear in the green thingy also cause drift? Just changing the lil' champion won't always do, I think.

Pry out the old one 👍🏻 😂

I did this fix on a controller and although it did eliminate the stick drift it created a new problem where the sensitivity is now way too sensitive. The 0 to 100 curve is way too steep, making it easy more difficult to make small movements like when aiming with the right stick for example

So I tried this with my son’s controllers because he had two controllers one with the right having stick drift and the other with the left. I swapped the corresponding rings and it works like brand new. This was with ps5 controllers.

Would you mind to give a suggestion in order to solve the problem of my dirfted logitech f310 controller?

Why is your least favorite way to fix? Does it not work? & where can I guy them circle springy things

@seyhuh

Жыл бұрын

Because its the hardest to do and costs money

@Jimmy-1919

Жыл бұрын

​@@seyhuh doesn't cost money just take one out of an old controller from the side it doesn't drift

I didn’t order the exact ones but it worked. The only problem I had was putting them in because there so small but otherwise great fix!

@noelnemeth6263

Жыл бұрын

What are they called? The link isn't working 😢

@Just_Being_Honest

Жыл бұрын

@@noelnemeth6263Trimmer potentiometer.

@keifyboi6913

10 ай бұрын

​@@noelnemeth6263 potentiometer

@Josh9996

8 ай бұрын

​@@noelnemeth6263i found a comment that said it is a potentiometer

@jaysolo23

Ай бұрын

@@noelnemeth6263Where are y’all seeing a description in this KZread shorts mode? I only see descriptions for regular KZread videos, so i couldn’t even find the link

Thanks korg

sometimes the inside potentiometer is drifted out and need a complete replacement. Stil less expensive than a 60$ controller.

@Catch_u_reloadn

11 ай бұрын

Yeah but you don't even have to solder anything if you get the WD-40 contactor spray just sprayed in there real good work it all around let it dry remove any hair you see and boom it's done

@lordadz1615

10 ай бұрын

​@@Catch_u_reloadnidk cleaning It in my experience barely works for me. Most of my stick drift personally happens from wear and tear and doing this method is the only way to fix the issue

Another “screw you any place that isnt USA”-fix

This actually worked for my controller I ordered a pack of 4 sticks and it technically had 8 wipers

I love how this shit happened to my new controller piece of junk

Yeah I tried this and the pins broke below the green thing now my stick is completely dead

@garethwillis

Жыл бұрын

You put them back in the wrong way around, I've done the same. The only way to fix it is buy replacement little circle things you broke.

@NR20244

Жыл бұрын

⁠@@garethwillisI did the same thing aswell but I put my little circle thing (potentiometer) back to the correct way and it’s resolved my issue

I have a sticking problem not drifting.....sticks when engaged vertical or slant....My green doors and insides are perfectly clean .....problem seems to be on opposite ends without doors .....i have v2 ds4 ....what to do?

Do you have to recalibrate after doing a fix like this?

I need only the small thing behind the green ? Because i already got new ones and i want to change the whole block. But now i need only the small thing jipieh

My series x controlled started drifting too after only a year or so of moderate gaming. Never happened with the Xbox 360 before.

That new wiper was completely messed up

This green thing broke at half when I've tryed to push it :c

I’ve literally kept the same controller for 3 years by cleaning it like this. As soon as I had drift I just cleaned those parts with alcohol and a Qtip let the parts dry & put it back together & then boom new controller

Where can i buy that lil round thing can never find em.. link doesnt work

How can u change that stick ??mins is broken so any idea how to change it???

Can i use un original one because in my country there is no original pontimeter

Okay so i couldnt get the green flap to click back in, now my joystick goes all the way to the right whenever i pair it to my xbox and i cant make it go back, wtf.

@garethwillis

Жыл бұрын

You put the round things back in the wrong way around that it why it won't shut. Spin them around and put them back in.

@kylejohnson9510

Жыл бұрын

@@garethwillis ahh thank you lol i shoulda tried that

@garethwillis

Жыл бұрын

@@kylejohnson9510 exactly the same thing happened to me. It won't close properly so you squeeze harder, then the pins snap. Either buy new ones or get a new pad, even a used one. Sorry that happened to you too mate but at least you know now. I can't remember for sure which way around the go but just watch a tutorial and see which way they are configured, best of luck bud.

This is the best fix for most people

Can I switch joystick from replica ps4 controller onto original controller?

😂😂😂😂i love you bro i need this 2 year

Does this fix the Elite series 2 drift as well?

@saadhasnain-xr4er

3 ай бұрын

yes

I’ve taken donor controllers and fixed my favorite ones. They are not Frankenstein controllers haha

How to fix the button for the joystick mine is not clicking in

are xbox one and wired nintendo controllers the same? lol. i have a graveyard and a couple that need fixing

what replacement part do i need?

@AnthonyDurand1

7 күн бұрын

@@promos319 they're called "potentiometers"

I’ve had the same series x controller for almost 2 years and i haven’t gotten any sort of drift yet 😭

I did that but it still with drift, really I did change the little piece with a new one but the drift wat not removed :'/

Howbdo you know witch part to replace?

Does this part work for the elite controller?

changing the wiper aint gonna fix it, drift cause by the wear out of the carbon strips inside the pots and the dust from the wiper rubbing against those carbon strips, chances are by removing the old wiper in this stupid video some of the dust also got remove and this pots also have very minor drift so it works

They should use hall effect sensors for all of their controllers but they won't. Sony, Microsoft etc. None of them will do that because it's far more profitible to make controllers that break every 3-6 months opposed to ones that last years.

If i replace that little circle inside the blue square with a new one my controller will be fine right ?

@crimbo6993

5 ай бұрын

unless you don't break it then yes

Try air blowing technique first

Thank you did this but i cleaned with alcohol and no more drift Thank you 😭😭😂

I need help pushing the green thing back any help

The forward input on my left stick on my scuf controller doesnt work at all. Left, right and back work fine? Help 😢

@toyotacorollaaltis8613

5 ай бұрын

What do you mean doesn't work does it not move up if so I don't know i this will work for you but my ps3 controller had that issue I forced it to go up pushed it until it broke fixed itself its been working fine ever since

i tried to replace it with one from my other controller and now my stick doesn’t work at all

Where is the link to buy the replacement

Whot is that spring thing called

I got a question I know this video is old but if you accidentally break off that green piece is it a bad thing bc whenever I put it all back and cut on the controller I’d stays going to the left side.

@NR20244

Жыл бұрын

If it’s fully broken off then you’ll need to resolder it to put it back on. Also about the left side thing, I had this issue when I made a mistake with my potentiometer, I had put it upside down this whole time. After I put it back to the correct position, my analog stick was back to normal and had less drift than it did before I opened my controller up.

Thanks its work now 👌

Contemplating this because my ps4 pro controller's right stick drifts to the left bigly. Shockingly my Xbox controllers havent and i replaced my joycon sticks with gullikits. And in my opinion all analogs should be modular like the WiiU pad, gamecube and n64 were.

Hey can i use Donor parts form other controllers?

bro I watched this video and the part you push down was welded and I broke it off lmao ordered a new controller :(

And can i use a white pontimeter thing

Ngl my controller joystick wasnt going to right no matter how hard ud push and out of nowhere i thought it could be from that little black thing so i exchanged it with my 360 controller (which they have the same joystick design) and it totally worked fine lol i was surprised for a second

❤ thank you

Is that the right analog stick?

Will this work with the 360?

Se lo puede lubricar con aceite de silicona?

Bro how do you figure out which of the two is faulty and thus which one to change, for reference purposes when i say " which of the two " i dont mean sticks i mean the little green jobbies that are both attached to the analog stick.

@DeclanVH

Жыл бұрын

The one replaced in the video is for left and right. The other green thing is for up and down

what is the name of this part

the green thingy is a potentiometer

Is this for the series systems?

Take out that champeen dayyyyyy