Thanks for tuning one of ours up! Also a bit of advice any Daylighter with serial number less than a 100 (4449-xxx) will have a reverse acting truss rod

"And just because you like your action super low, doesnt mean the entire world needs to follow your guidelines." 2:55 Thanks! This spirit should be taught in elementary school. The world would be a better place.

This was excellent. I think people are reacting to two of your personal traits. You communicate in an exceptional fashion: pacing, diction, syntax, word choice and videography are all excellent making these videos instructive and interesting. And then you’ve got that Stan Rogers resonance in your voice that is simply enchanting. I keep waiting for you to render your version of Northwest Passage. Regardless, thanks for another excellent video. The Learning Channel should check you out.

"Let's not have anymore of that. OK" You totally rock! Thank you for your videos.

@MarksUkuleleTips

3 жыл бұрын

That is a stern talking to, Canadian style. 😊

"It looks ugly, I just build them quick an fast" shows what I know. Here I was admiring the workmanship of it thinking about how satisfying it would be to have such a specialized tool. I guess ugly/good/bad is all relative.

@tommypetraglia4688

4 жыл бұрын

Well said. There is nothing ugly about any of the tools he fabricates for himself. Even a simple tiny sanding block has a certain finesse. This man is compelling as well as restful to watch. I find I can't get enough often replaying a video 2 or 3 times, leaving it going in the background while I do something else.

I'm glad you addressed the fact that different players like different action for their playing style. Love the videos. Thanks for sharing your knowledge with us!

I'm glad you replaced the Lucky 18 that gives the Kauer the Mojo! You have one of the most reassuring calming no BS voices I have heard. The voice of a very good teacher.

Hi from down under. An Allen key with tape around it can work for bridge post adjustment. If you seat the straight end in level with the slot, the bent end acts like a lever , think bicycle crank and pedal ... our Australian 50c piece is also effective because of it’s shape and width. Keep the vids coming ...

I said before your attention to detail is beyond what watched this for the 2nd time. You are so deserving, but, too humble. As I have also said before, your attention to detail is superior. It goes along with the pride you take in the totality of your effort.

I really enjoy watching your videos. I especially like seeing somewhat obscure guitars as opposed to the usual Gibson and Fender repair.

I setup my own guitars. Started doing that after all the techs in my area “forgot” I liked high action on my guitars. They always seem to think they know better than me. I can adjust the action on my guitars as low as they can now, and have done lots of setups for friends who like it that way, but my own guitars still have a nice meat to the action, so I can bury my fingers in there good. My guitar, my setup!

I'm no Luthier, but even as an occasional player, I learn so much of use from every one of your videos, let alone how entertaining it is to watch a master at work. Thank yo - you've solved several problems I've had, so far.

@cat793c2008

5 жыл бұрын

Really enjoyed this video. So much info Great when your learning like I am. Thank you

This was so interesting to see the wood bend in this way, Here in NC USA, I have seen some Blue Ridge Mountain violin makers soak the wood in a warm bath overnight, then placed in a jig to bend the wood into it's shape, then slowly drying while in the mold, however they are cutting the trees to make the instruments, and have plenty of wood on hand, time as well,,,, Thank you

Wow this is the guy behind the curtain. This is truly Mr. Wizard, the Wizard of Guitars. I am SO impressed with his knowledge, but even more than that is his work ethic. Such an honorable and honest young man. I take great satisfaction watching a young man with skills, honor, honesty, and a work ethic that is truly impressive. Thank you for your videos but more than that thank you for being you and not budging from your convictions!

@zapa1pnt

4 жыл бұрын

John, you should also check out Rosa String Works: kzread.info/dron/29Dkc6-RMU8TCrloPN0Cbw.html I hope Ted doesn't mind my mentioning him here. I'm sure he's familiar with Jerry Rosa. Jerry is a well known acoustic miracle worker, here in Missouri, in the US. I really love watching and learning from both these guys.

Most slotted screws have a straight cited swat, and most straight blade or flat blade screwdriver are actually tapered, with a slight V shape. Although someone probably makes screw drivers that have a true flat straight blade, You can easily grind and file your own screwdrivers to fit The screw heads snugly and transfer the force down into the slot. The bent or folded playing card or business card is a neat trick.

We need more videos of you building guitars, true master of the craft.

Another good one and I wouldn't expect anything else from you! thanks again!

your videos are so calming i love them. thank you!!

Another great video! Thanks for showing us!

Awesome work , thank you so much for all the wonderful info ! 😊👍💖

Love your videos very to the point. Plus you do very good work.

i really enjoy watching people repair guitars and it helps me under stand repairs better . thanks

I think you're the most underrated repair person online. Amazing tips and awesome attention to detail!

Amazingly calm dissertation of this difficult work. Not a luthier but have used similar techniques in furniture building, it can very frustrating and yes, practice is the key. Thank you for sharing.

Another very interesting vid. Thanks for sharing your skills and advice, much appreciated.

I am really enjoying your videos, very helpful. Thank you.

I would LOVE to have a guitar made by you!! I find your videos very educational and fun to watch. Keep 'em coming!!!

Thanks for the informative videos. I like the simple clamps you made for holding the sides in the form.

Nothing better than watching his beautiful work and in such a relaxing setting and delivery! Love it ASMR LUTHERIE

Your video's are entertaining and educational. Thank you for doing them.

Your videos are so good sir! I Really enjoy them. I’m not knocking anyone or other youtubers but As you know, there is a lot of content on KZread from other youtubers and although a lot of it is good, a lot of it isn’t so good and well, I can’t quite define how or why exactly yours is so great, other than the obvious of how intelligent, well spoken, knowledgeable and skilled you are. But there is more, you bring something quite unique to the table. You don’t give too much information and you don’t give too little. You’re not showing off your knowledge and skill, you’re sharing it and that’s great. There is more but I don’t wanna go on and on with a long list. Anyway. Seriously though, I’m not trying to brown nose ya. I just wanted to say you’re the man! Man. Keep it up!

Ted, you mentioned luthiers are getting away from using side bending forms, due to the phasing out of incandescent light bulbs. That need not be the case, Appliance heating elements can be used, in place of light bulbs, and, unlike light bulbs, are made to survive the heat they produce. Add a digital heat controller w/relay (inexpensive on Ebay) and you have precise and "walk away" control of your bender. Sorry if I posted this twice. I thought I already posted it, but couldn't find it.

I used to do the same thing with the large screwdriver as you. THEN I bought the jacketed tool that Stew-Mac sells and let me tell you I will never use a screwdriver again. Go check it out. You do top level work, you need this tool. I have no affiliation with them other than I buy their stuff from time to time. Peace and Good Luthery. :)

@franklinslamo

5 жыл бұрын

It's the stop tailpiece wrench here .... www.stewmac.com/Luthier_Tools/StewMac_Tool_Sets/Tune-o-Medic_Bridge_and_Tailpiece_Tools.html

Great advice on luthiers. I have a few in my town who think they are luthiers and are terrible (LOL), but we do have a couple that are top notch. Great videos!

I love the craftsmanship

It is so nice to see a real luthier work, someone who doesn't piss and moan about having to repair instruments. I'm glad you enjoy your work, because I certainly do.

I like your side it's a very informative and detailed and you don't try to hide nothing thank you very much I'll continue watching

AWESOME video with Amazing information !!!! Thank You !!! Slowly but surely , I'm needing to learn how to work on and repair all of my own things because the butcher/mangle shops that are available , I'd never use which is why alot if people never fix or throw away their things .

You, Sir are a true lover, of the sound of Vibrating Wood!

Many excellent tips, thanks much. I especially like the distinction between stiffness and strength around 13 minutes and the use of the heeled neck block. Thumbs up to crush a troll.

Very interesting and inspiring, on a larger scale, I have used some drain pipe plugged at both ends with towels and a steam paint stripper providing the heat/water...this was working on a Thames river barge and bending much bigger pieces.

Great info, I just started building ukuleles last year, I made a bending form just like you have But I didnt know about turning the blanket back on before you remove the wood to put into the form. Thats excellent info for me. Thank you again & God Bless..

Ship a small box to Thailand.... put in it some of your awesomeness, patience, ability and last some of your candor.... thank you! We may be kin as I don't suffer fools well either... look up the conversion as you are sitting in front of the largest encyclopedia ever made... I love that!

Q&A for future video post: “workshop setup” tool storage, cabinet and drawer organizers, workbench sizes and dust collection systems . Thanks!

Even your molds look great!

Very nice, always. It is true that besides being a very skilled professional, you’d easily be a great teacher. Great atitude.

when i made my first acustic (ukulele) i made it with flame maple sides. and my bending iron? metal rod suspended between 2 blocks with candel below it. and i did it. took me hours, but i got the sides bent by hand on a candle :)

Absolutely fantastic. I broke every side I ever attempted on a heated pipe. Too anxious. Eventually learned to boil rosewood (Irving Sloane style) and bend on my heated mold. Now that you mention it, my use of internal light bulbs would present a problem for the heating. Gibson has the hydraulic ram for assisting with pressure in the cutaway

For brittle woods I thickness two pieces to .045 in. then bend and laminate to get a stiff and sturdy part. I do not trust a super thin side, even though they can support the top and back. They are too easily damaged by blows to the side which are difficult to repair. Great video as usual.

Another excellent video! Thanks!

Superb wood and video work. Such a pleasure to watch.

Thanks again for a great video. Thank you

A pet peeve of mine as well... I've always just used a nickle to adjust tune-o-matic tailpiece studs

I’m so pleased to see that, finally, a guitar manufacturer is taking the age-old truss rod heat dissipation issue seriously...

@KBorham

Жыл бұрын

I scratched my head at your comment at first, I actually came back to it to say hahaha, good one.

Absolutely amazing......

Made a lot of potato chips building F-5's before the good old heat blanket! Thanks for the show.

I was one of those that couldn't quite get the feel of bending on an iron. Took multiple sides until I also thinned the wood more and pushed gently. Eventually I decided I liked boiling the rosewood for 3 hours and bending on a heated mold with light bulbs inside. Especially for the cutaways. Start there with the tightest bend and working to the waist and then finally the lower bout, easier as it was not as plastic anymore. I watched the Gibson video on their cutaway mold, they have hydraulic clamping, less dexterity required.

Really dig the channel.

Your a genuine honest about shipping costs being high.

Great video

Very cool video, thanks so much!!!

Show us a video on Fret Sprout. Especially how to remove fret sprout on a bound fretboard! Enjoy your posts! Keep it up!!

Can you please describe in your upcoming Q&A session how you made those clamps you used at the end? Been wanting to make some 6" deep clamps for bridge reglues (as a test. Yes, I know steel/aluminum/etc., work better). Thanks, and thanks for the great videos!!!

Fantastic thank you

That's a very nice looking guitar!

Your honest shipping comment is the cure to shipping a guitar to Canada for repair. As for me the risk of international laws adding additional fees or the possibility of not being able to getvmy baby back would ruin my day for sure.

NICE diy clamps!

I know a slide player who actually had a new nut put on his guitar to "float" the strings above the fretboard. The action is literally level across the board from nut to bridge. It's low enough that you can still fret a note if you really want to, but you wouldn't want to try barre chords on it.

That Kauer is a beauty

I like my action a little on the high side too. I play pretty aggressively, lots of strumming. To each his own.

EXC pt concerning the front neck block. I use ply block on my ukes, and a wider /deeper block as found in the fleta gtrs.. 0n CL For future ss gtrs I will definitely use the spanish style head block. I have 2 M. dunn gtrs circa 72and 73.a maccaferi and a jumbo 12 string . they both use the spanish style head block, no neck resets yet !!

Many of us Gen X'ers grew surrounded by both imperial and metric measurements and learned to live with both.

Oh man, your comment about damaging screw heads with the wrong size driver... preach it brother! One of my pet peeves too.

@alext9067

5 жыл бұрын

Even that one sucks. What do you use?

@goodun2974

4 жыл бұрын

That screwdriver to screw interface at 1: 50 looks kind of sloppy. A trick question: when is a Philips screwdriver not a Philips screwdriver? When it's a JIS screwdriver (Japan Industrial Standard). Or a Pozi-Drive screwdriver (Pozi-drive screws are common on European-made equipment) . In my day job repairing older audio and stereo equipment, I see both JIS and Pozi-Drive screws frequently. And apparently, many motorcycle enthusiasts have stripped the JIS screws on their Japanese made bikes by not knowing there's a difference between Philip's and JIS screws and drivers.

Remember to bend your binding. Words to live by.

Finding a luthier , with the proper approach to restoration or repairs is a hit and miss for . I have a friend that is recommending a guita builder in Kamloops BC , they build Riversong guitars. Of course he has no You tube site that demonstrates his skill set ...this video you just did...covered , a number of miles of repairs, building and design... now that is very open and you know what you get when someone sends you a guitar.. I have to make a call to UPS to get a shipping cost to Hamilton...cheers Alberta Dave

Thanks 👏👏👍🇬🇧

Great Vid, thanks. Does that slip foot block deaden the tone any? or is it not noticeable?

Great work as always. Could you do us a favor Show the finish product. Like a movie Beginning, Middle, end. Its very helpful thanks

Set Ups & Side Bending......a good song title about Luthiers! Challenge set guys 😂

Great stuff. Thanks so very much. Metric conversion requests ? Laziness. Just plain too lazy to look it up.

Awesome videos! Fellow Ontarian here, I own a mid 90s Washburn by Oscar Schmidt acoustic that the bridge has started to come off the top. Do I need to peel it all off to top and re-glue it or just get glue in the gap and clamp in place?

Any update about the 7 strings? Man you got me hooked up!

Martin don't put a fretboard dot on the 3rd fret of there guitars so if I bought a Martin is it a big job to have a luthier put a perl dot on the 3rd fret? Really enjoy your videos,your work is so tidy and professional and you seem to really enjoy what you do.

I was quite surprised at a couple of things on the Kauer guitar. The nut slot for the forth string was not well formed and the build up of lacquer in the truss rod aperture was very untidy for a $3.5k guitar.

Great video as always ! Do you (have you) ever work on bass guitars ? Thanks for the great content

I really really like your videos! They are so informative! Keep that good work up! I also have a question about a guitar who's neck need a repair... It is an old Framus 5/18 "favorite" 1959. It has a badly bow towards the top because some idiot strung steelstrings on it. I wanted to know, if there's a chance of repair how you do those jobs? I much appreciate your answer 🙌 Greets from Germany 😊

👍👍😎✌️

👍

Update on your 1 min remark Rosewood and Cites... it is being removed! YEA!!!!! - Thanks for the videos

Your channel is a Million $ Gem , for free . Cheers.

My uncle Joe is the only person as handy as you are and uncle Joe could figure out how to do anything if he set his mind to it and you got it that ability to do work others never can

Never suffocate a truss rod. Speaking g of action, I get hassled constantly by friends... when I used to see friends, because I love high action. I want my Strat to play like my Yamaha FG-441s. I even wish I could afford customized electric with string spaces that match my acoustic.

What do you think is the best way to find guitars for a beginner to practice luthiery

"Boy, that's a lot of clamps", is that a sneaky reference to the movie "Everly"?

What are the best lutherie books available? I've seen so many for sale and don't know which ones are relevant or accurate. I am particularly in need of information on neck geometry for set neck guitars, but also am looking for info on all facets of instrument making such as grain direction, side bending, or lacquer spraying. I work off intuition and videos like yours, analyzing different methods of repair and construction, but would like comprehensive information that i can reference and learn from.

Nice. On Q&A! My question: how do you know do much about the history of vintage guitars. This is from 1936. Because that and that. Any suggestions how I can start to know something... Thanks! I know "old" vídeo. But... 😁

❤️🤟🏻

Being that you mentioned questions and rosewood, I was wondering if you could tell me if the new affinity squire strats with Pau Ferro fretboard are less durable than rosewood in your opinion as someone wooking with wood. I know I can find opinions of salespeople online, but I want an honest opinion.

Another cool video dude . I've got a request for help on finding out some infromation on an old Moridaira guitar. It's a WJ-20s and I can't find any info on this model or even what the letters/numbers mean ( yes I've tried google lol ) . The body is sunburst and the pickguard is like a gibbson flower pattern style . The head stock has ' Moridaira' on the front but 'Morris' on the back . Any help would be really appriciated . Thanks.

Hey so question for any luthiers out here. Do y'all buy or build your jigs and moulds?