The knowledge you share to the community is great!!
@perfection7424 жыл бұрын
Happy to see this build back. Have been wondering what happened to trying to make power with it.
@jotahbin3 жыл бұрын
Very help full content. Thank's for this tips. 🙏👌💪👍🔥
@wussawp-csgochannel58724 жыл бұрын
We need to see part 2 of the MOMMOBILE ACCORD
@qrs36583 жыл бұрын
Awesome video. Please make a Video on J Series.
@ramonbriones44874 жыл бұрын
Good stuff!
@carlosnieto88824 жыл бұрын
What year accord are you using the throttle body from? And what is the mm on it?
@teejen22073 жыл бұрын
What year and model USDM Accord TB will work?
@noman75082 жыл бұрын
I am so happy I have found you. I have turboed my k24z3. Would love to chat with you about it. I want to upgrade my intake manifold. Not sure if the power gain is worth it. Are there Any stock Honda manifolds that fit?
@VTECAcademy
2 жыл бұрын
It would require an adapter to use a different manifold that would be beneficial. Then you could use the 2012 Civic Si manifold. HP gains would be OK. If you are trying to squeeze that last little bit of HP from a setup you already have without upgrading the turbocharger, then it could be worth it. You can ask questions during our live broadcasts on Tuesday nights at 7PM PST.
@RjctdEK4 жыл бұрын
Brian I'm using a 05 RSX base model wiring harness & ECU for my JDM k24a and a base RSX throttle body. Am I going to have to do this same procedure.
@bobbydelamar606 Жыл бұрын
What MAP sensor is best to use? I have a RBC IM and Type S TB. I noticed I have 2 MAP sensors lol. I guess one from the SI and one from the Type S. Is one better than the other?
@acefields6405 Жыл бұрын
I appreciate your videos in the knowledge that you're giving. Question I have a base RSX K24 swap it runs but the idling is high and it overheats any ideas on how to get the idling down. Thanks for the help
@VTECAcademy
Жыл бұрын
The high idle may be a problem with either a vacuum leak or malfunctioning EACV. I should probably do a video on troubleshooting a high idle.
@acefields6405
Жыл бұрын
@@VTECAcademy yes I think we all would appreciate if you made that video explaining those issues
@colecampagna63022 жыл бұрын
Came to see what tb’s might fit on my ep3. Have you ever seen the throttle body itself leaking causing a lean code?
@VTECAcademy
2 жыл бұрын
RSX, EP3 and CRV. The RSX Type S and EP3 are the best. And no I've never seen a T body that leaked and caused a lean code. That is usually related to fuel flow.
@colecuzz3 жыл бұрын
What about a ep3 harness do i need to flip the wires
@rhb471504 жыл бұрын
Is the accord throttle body bigger than the RSX type S
@ericg1149 Жыл бұрын
Would have been nice to know the sizes of each
@neverhobbyfree2 жыл бұрын
Brian, at 3 minutes, you talk and show how the accord tps is clocked differently than the rsx type s tps, but operates the same. Could I use an accord throttle body/tps in my rsx type s despite the tps being clocked differently? thank you for your wealth of knowledge.
@VTECAcademy
2 жыл бұрын
No, it won't bolt up.
@gerardogoveche80642 жыл бұрын
I have a 2004 tsx planning to put a port rbc intake manifold what is the best option to upgrade my tb any help would be appreciated thanks
@levifelipe4 жыл бұрын
Which Accord Euro was the donor of this TB?
@Ragnarx4 жыл бұрын
So If I try using my 06+ tsx IM without the iacv port, couldnt i just disable it in k pro or will i have a problem?
@adrianrangel20383 жыл бұрын
Will a j37 throttle body work with a k24a2
@pandabuilt43412 жыл бұрын
I’m trying to get more bottom end torque in my auto 2nd gen crv since I’ll be putting on a lift kit and bigger wheels and tires . The accord base model tb is a good upgrade?
@VTECAcademy
2 жыл бұрын
We think it's the same size.
@jarodwhiting36764 жыл бұрын
6:31 lol!
@rsx_chucky53973 жыл бұрын
So I just found out the k20a2 and k20z1 are not the same. The map sensor inlet port are different.
@raysb240sx Жыл бұрын
I have a manual 05 Accord TB from a manual for my JDM K-swap, Would this TB work on the RBC? or do I have to find a 03 DX TB? Thank you
@nicselectronics819 ай бұрын
I'm running a tsx IM and TB on my Accord 2.4 , something tells me the stock TB will be more responsive 🤷 it's on the way so we'll see.
@francismande3 жыл бұрын
Hi will an Accord throttle body work on a 06-08 USDM TSX intake manifold?
@francismande
3 жыл бұрын
I guess the year to get for the USDM K24a2 use the cable accord throttle body is 04&05 because it has provisions for the IACV.
@nicholaskaloi86884 жыл бұрын
Where is your auto to manual wiring harness video?
@iron-gamerstv2 жыл бұрын
Do you guys have any guides on repining Honda fuel injectors to work with RDX injectors. I own a 2012 Accord LX and I'm having a hard time trying to get these Denso 410cc injectors installed. All pigtails I find are not the correct fitment for my car to the RDX ones. So confusing
@VTECAcademy
2 жыл бұрын
Not yet. We need to do that.
@francismande4 жыл бұрын
Where do I get the bore service done? Is it the same as maxbore?
@VTECAcademy
4 жыл бұрын
King Motorsports
@MRROCKAPE3 жыл бұрын
Did you ever do a video on converting an auto trans K series engine harness for manual engine/trans combo? Rsx base auto harnesses are pretty cheap so my question is it just remove the auto wires and connectors or it there more to it? Thanks for any help , (mine is a rbb k24 stand alone setup going into a crawler mated to a GM auto)
@VTECAcademy
3 жыл бұрын
I just recorded it. We'll try to have it up soon.
@brandonbruce5571
3 жыл бұрын
X2, I’m actually doing this as we speak. #1 repin /extend the TPS connector #2 use the connector from the intake manifold runners and move down to use for reverse lock out and repin that at the ECU connector. I’m sure there’s more, just haven’t got that far yet.
@hbracer93 Жыл бұрын
I have a skunk2 alpha throttle body, swap car with a base RSX engine harness. I have both the accord TPS and a base RSX TPS, if I use the base TPS do I need to re-pin the TPS plug? Thank you!
@VTECAcademy
Жыл бұрын
I believe you need an RSX Type S compatible TPS for the Skunk 2 throttle body. And, you need to re-pin the TPS sensor.
@IntegraDIY2 жыл бұрын
Supposedly a bigger throttle body doesn’t even gain power at all, unless head work is performed. People swap manifolds, and throttle bodies just for looks. The biggest cheapest gain is power is an intake short ram or cold air intake, vs stock plastic intake box. Besides that any time you want to see power, you have to have a healthy bottom end, drop in cams, FBO and tune
@dragan3290
Жыл бұрын
I put a 65 mm TB on a Buick based Aussie version v6 vp commodore, then a cold air induction, iat resistor mod , shift kit in rhe turbo 700. The TB from 60 mm? Instant response and more push in the seat! Ecotec v6 is starved in standard trim.
@chamros11534 жыл бұрын
Can you use the base model RSX engine harness for a kswap ?
@VTECAcademy
4 жыл бұрын
Yes you can. Look at the previous video on the RVS Lockout wiring.
@chamros1153
4 жыл бұрын
@@VTECAcademy will do! thank you
@adhrndz773 жыл бұрын
i have a 70mm skunk 2 pro tb can i run it on my stock 02 rsx type s without a tune till i can get a tune ? will it affect much if i dont get tune ?
@nicolasdujardin5691
3 жыл бұрын
I wouldn't recommend it... it wont run smooth, you'll have a rough idle , and maybe some stuttering .. Your letting in more air, but not more fuel, and that will be your problem, your AFR will be messed up... i recommend waiting till you can tune it.. You still have a stock intake manifold? Greetz
@bisket20032 жыл бұрын
Anyone happen to know if I can run a TSX TB with the IM on my K24A4 (05 Honda Element)??
@VTECAcademy
2 жыл бұрын
it should bolt right up.
@NoFear19113 жыл бұрын
Soooo whens this crv harness video coming 😬😬😬
@VTECAcademy
3 жыл бұрын
I just recorded it. We'll try to have it up soon.
@jameshaulenbeek59314 жыл бұрын
Why are you going with a 4-1 header as opposed to a 4-2-1 or hybrid style header?
@nicolasdujardin5691
3 жыл бұрын
A 4-1 header makes a little more power in the lower ranges of the rev range, and a 421 makes more power up top... so it's a bit of personal preference and the purpose of the build...
@Ehren1337
3 жыл бұрын
@@nicolasdujardin5691 i thought 4-1 is for top end only. 4-2-1 for midrange to top.
@1stGenCRXs4 жыл бұрын
Great video Brian! I got an Accord K24a TB for my JDM K24a2 swap. Question is what cable bracket bracket do I use? The accord bracket mounts to the manifold not the TB like the others.
@VTECAcademy
4 жыл бұрын
What manifold do you have?
@1stGenCRXs
4 жыл бұрын
VTEC Academy will be the stock K24a2 RBB
@VTECAcademy
4 жыл бұрын
@@1stGenCRXs If you have the Accord manifold and Accord or Element bracket, use an Element throttle cable with it.
@rhb47150
4 жыл бұрын
Is the accord throttle body bigger than the RSX type S
@applepoop102 жыл бұрын
How big is the throttle body for a K24A4 engine?
@Esdru221
11 ай бұрын
60mm
@privateracing233111 ай бұрын
I have a 2004 honda accord k24 and I put a 70mm throttle from 2006 acura rsx type s and I put on tps sensor from the type s now I have tps sensor issues I need to rewire the the TPS sensor need help thank you 🙏
@VTECAcademy
11 ай бұрын
Is it showing .5V at fully close throttle?
@rphipps19822 жыл бұрын
Can I put a 2.4l Accord throttle body on a 2.0l?
@VTECAcademy
2 жыл бұрын
That depends on the manifold.
@GunSnob3 жыл бұрын
I have a question. Its my first K series build and I am trying to put an accord k24a4 TPS on a skunk2 alpha 70mm throttle body. I can not get the TPS to line up with the throttle body shaft due to it being clocked a bit different. I'm assuming I need a type s TPS? Thanks for your time!
@VTECAcademy
3 жыл бұрын
You'll need the Type S TPS
@GunSnob
3 жыл бұрын
@@VTECAcademy I appreciate the reply. Thank you sir!
@lafave25554 жыл бұрын
Is the usdm EP3 throttle body the same as the rsx type s?
@VTECAcademy
4 жыл бұрын
Yes.
@lafave2555
4 жыл бұрын
@@VTECAcademy Thanks!!
@realtruth972 жыл бұрын
Do you always have to do a throttle body learn procedure everytime you take it off?
@VTECAcademy
2 жыл бұрын
Every time you reset the ECU. Unless you have a new throttle body.
@realtruth97
2 жыл бұрын
@@VTECAcademy I took my thottle body off to clean it and it was acting up until I resetted the ecu and calibrated the TBI. Now it runs perfect again.
@CesarsCarCorner4 жыл бұрын
Where the link for the pin tool?
@VTECAcademy
4 жыл бұрын
It's up!
@vse0
4 жыл бұрын
@@VTECAcademy i can't find the link.
@danjko888 Жыл бұрын
What oem throttle body would fit a rsp intake manifold? Thanks
@VTECAcademy
Жыл бұрын
Drive by wire would be the J-series throttle bodies and drive by cable would be the Accord K-series T-bodies.
@danjko888
Жыл бұрын
@@VTECAcademy does it matter if the accord is a manual or automatic trans cable driven tb? Thanks
@kawirider_804 Жыл бұрын
I have a 04 ep3 and wanna do a throttle body upgrade. What do you suggest?
@VTECAcademy
Жыл бұрын
It isn't really necessary on the 160HP K20A3 engine. Have you done other modifications?
@kawirider_804
Жыл бұрын
@@VTECAcademy none at al
@christopherrogers83163 жыл бұрын
I just got a 70mm throttle body , hopefully it won't effect my tune?
@200horsepower3 жыл бұрын
Quick question to anyone can help please. I have 2008 tsx i would like to put rbc intake manifold and I think a zdx tb . This would be plug and play? Thanks!!
@VTECAcademy
3 жыл бұрын
I believe both of those are a direct bolt and plug and play.
@200horsepower
3 жыл бұрын
@@VTECAcademy thanks!!
@ivantsipr
2 жыл бұрын
No, ZDX TB will need an adapter, also you'll need flashpro to tune it since that IM +TB will let a lot more air in, probably you'll need RDX injectors too since stock ones will be running maxed out (K24a2 with I/H/E can max stock injectors pretty easily)
@juantrejo70843 жыл бұрын
What throttle body can I use on my 2000 Honda civic ex?
@VTECAcademy
3 жыл бұрын
Aftermarket or stock but larger?
@juantrejo7084
3 жыл бұрын
@@VTECAcademy stock but larger.
@VTECAcademy
3 жыл бұрын
@@juantrejo7084 The B16 throttle body from the 99-00 Civic Si. Or the Integra GSR throttle body.
@MikeTheHooper7072 жыл бұрын
I can't find any throttle bodies for honda crv 1999 ex b20 what alternatives do I have
@VTECAcademy
2 жыл бұрын
Off the top of my head, I would look at the 98-01 Integra LS/GS throttle bodies.
@MikeTheHooper707
2 жыл бұрын
@@VTECAcademy hey thanks alot for the quick reply I'm in a moving process and had to replace my throttle body since my old one was defective I ordered one already since it's so last minute but it may not fit it just had the same orientation (sensors in right place, hoses, etc)
@MikeTheHooper707
2 жыл бұрын
Any other throttles i heard maybe the rs integra 90-93 as well
@mrwaffles13944 жыл бұрын
Aren’t you supposed to wait 3 seconds and throw after pulling the pin out?
@VTECAcademy
4 жыл бұрын
After consulting the Book of Armaments, "First shalt thou take out the Holy Pin. Then, shalt thou count to three. No more. No less. Three shalt be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, nor either count thou two, excepting that thou then proceed to three. Five is right out." You are correct. - Monty Python and the Holy Grail
@felipesilvausa4 жыл бұрын
Where you guys located?
@VTECAcademy
4 жыл бұрын
VTEC Academy is in Phoenix AZ, but we aren't a shop.
@supers0nic77
2 жыл бұрын
@@VTECAcademy hey that's where i live. Tune kpros? Also i think i put the wrong tb on my k24a. I got an accord one but it was auto not manual. What's the difference?
@stinky155523 жыл бұрын
What year Accord throttle body bolts on RBC, RRC manifold?
@BrianGillespie_brianathasport
3 жыл бұрын
For drive by throttle cable 2003-2005.
@stinky15552
3 жыл бұрын
@@BrianGillespie_brianathasport thanks but I meant other regular style TB cable operation like 2002 RSX Type-S. Thanks though enjoy the videos and content.👍
@BrianGillespie_brianathasport
3 жыл бұрын
@@stinky15552 you want to use the 2003-2005 Accord DX throttlebody on the RBC and RRC.
@raysb240sx
2 жыл бұрын
Does it have to be from a manual or will one off an automatic work as well?
@stinky15552
2 жыл бұрын
@@raysb240sx long as its cable driven not drive by wire. I got mine off amazon but remember if tps sensor is facing up have to flip around the the out wires around 123 normal to 321 also may have to make custom throttle cable stay bracket. See what Brian says also. I got mine off amazon just make sure its 2003-2005
@supers0nic772 жыл бұрын
I'm using an 05 accord throttle body on my k24a rbb. I realized later that i bought one with a part number from an automatic car. What's the difference and do i need to buy one from an manual? Also the accord one is pretty small but rax is only 2mm more. Should i just get a different TB altogether?
@VTECAcademy
2 жыл бұрын
For 200 hp the Accord TB is big enough. The. auto or manual throttle body fits fine on the RBB. If you have an RBC or RRC then you need the Accord DX (auto or manual) throttle body.
@supers0nic77
2 жыл бұрын
@@VTECAcademy i couldn't figure out the difference between manual or auto they have different part numbers. The manual one much harder to find. Anyways I'm on an rbb manifold not much room on the firewall since it's in an mr2.
@supers0nic77
2 жыл бұрын
@@VTECAcademy also since you're here do you do dyno tuning? I'm local to you. My engine is stock besides bolt ons
@VTECAcademy
2 жыл бұрын
@@supers0nic77 We usually use Tim at Xact Dyno.
@VTECAcademy
2 жыл бұрын
@@supers0nic77 I'll have to do a direct comparison. I can't think what the difference might be.
@alexdlion41803 жыл бұрын
Is it possible to make a RBB intake manifold from honda accord work on a k20a3 from a 2005 acura rsx/JDM honda integra?
@VTECAcademy
3 жыл бұрын
Yes, but you would have to trim part of the manifold so the upper radiator hose inlet from the A3 could be installed.
Пікірлер: 129
Video on installation of the 50 degree vtc?
The knowledge you share to the community is great!!
Happy to see this build back. Have been wondering what happened to trying to make power with it.
Very help full content. Thank's for this tips. 🙏👌💪👍🔥
We need to see part 2 of the MOMMOBILE ACCORD
Awesome video. Please make a Video on J Series.
Good stuff!
What year accord are you using the throttle body from? And what is the mm on it?
What year and model USDM Accord TB will work?
I am so happy I have found you. I have turboed my k24z3. Would love to chat with you about it. I want to upgrade my intake manifold. Not sure if the power gain is worth it. Are there Any stock Honda manifolds that fit?
@VTECAcademy
2 жыл бұрын
It would require an adapter to use a different manifold that would be beneficial. Then you could use the 2012 Civic Si manifold. HP gains would be OK. If you are trying to squeeze that last little bit of HP from a setup you already have without upgrading the turbocharger, then it could be worth it. You can ask questions during our live broadcasts on Tuesday nights at 7PM PST.
Brian I'm using a 05 RSX base model wiring harness & ECU for my JDM k24a and a base RSX throttle body. Am I going to have to do this same procedure.
What MAP sensor is best to use? I have a RBC IM and Type S TB. I noticed I have 2 MAP sensors lol. I guess one from the SI and one from the Type S. Is one better than the other?
I appreciate your videos in the knowledge that you're giving. Question I have a base RSX K24 swap it runs but the idling is high and it overheats any ideas on how to get the idling down. Thanks for the help
@VTECAcademy
Жыл бұрын
The high idle may be a problem with either a vacuum leak or malfunctioning EACV. I should probably do a video on troubleshooting a high idle.
@acefields6405
Жыл бұрын
@@VTECAcademy yes I think we all would appreciate if you made that video explaining those issues
Came to see what tb’s might fit on my ep3. Have you ever seen the throttle body itself leaking causing a lean code?
@VTECAcademy
2 жыл бұрын
RSX, EP3 and CRV. The RSX Type S and EP3 are the best. And no I've never seen a T body that leaked and caused a lean code. That is usually related to fuel flow.
What about a ep3 harness do i need to flip the wires
Is the accord throttle body bigger than the RSX type S
Would have been nice to know the sizes of each
Brian, at 3 minutes, you talk and show how the accord tps is clocked differently than the rsx type s tps, but operates the same. Could I use an accord throttle body/tps in my rsx type s despite the tps being clocked differently? thank you for your wealth of knowledge.
@VTECAcademy
2 жыл бұрын
No, it won't bolt up.
I have a 2004 tsx planning to put a port rbc intake manifold what is the best option to upgrade my tb any help would be appreciated thanks
Which Accord Euro was the donor of this TB?
So If I try using my 06+ tsx IM without the iacv port, couldnt i just disable it in k pro or will i have a problem?
Will a j37 throttle body work with a k24a2
I’m trying to get more bottom end torque in my auto 2nd gen crv since I’ll be putting on a lift kit and bigger wheels and tires . The accord base model tb is a good upgrade?
@VTECAcademy
2 жыл бұрын
We think it's the same size.
6:31 lol!
So I just found out the k20a2 and k20z1 are not the same. The map sensor inlet port are different.
I have a manual 05 Accord TB from a manual for my JDM K-swap, Would this TB work on the RBC? or do I have to find a 03 DX TB? Thank you
I'm running a tsx IM and TB on my Accord 2.4 , something tells me the stock TB will be more responsive 🤷 it's on the way so we'll see.
Hi will an Accord throttle body work on a 06-08 USDM TSX intake manifold?
@francismande
3 жыл бұрын
I guess the year to get for the USDM K24a2 use the cable accord throttle body is 04&05 because it has provisions for the IACV.
Where is your auto to manual wiring harness video?
Do you guys have any guides on repining Honda fuel injectors to work with RDX injectors. I own a 2012 Accord LX and I'm having a hard time trying to get these Denso 410cc injectors installed. All pigtails I find are not the correct fitment for my car to the RDX ones. So confusing
@VTECAcademy
2 жыл бұрын
Not yet. We need to do that.
Where do I get the bore service done? Is it the same as maxbore?
@VTECAcademy
4 жыл бұрын
King Motorsports
Did you ever do a video on converting an auto trans K series engine harness for manual engine/trans combo? Rsx base auto harnesses are pretty cheap so my question is it just remove the auto wires and connectors or it there more to it? Thanks for any help , (mine is a rbb k24 stand alone setup going into a crawler mated to a GM auto)
@VTECAcademy
3 жыл бұрын
I just recorded it. We'll try to have it up soon.
@brandonbruce5571
3 жыл бұрын
X2, I’m actually doing this as we speak. #1 repin /extend the TPS connector #2 use the connector from the intake manifold runners and move down to use for reverse lock out and repin that at the ECU connector. I’m sure there’s more, just haven’t got that far yet.
I have a skunk2 alpha throttle body, swap car with a base RSX engine harness. I have both the accord TPS and a base RSX TPS, if I use the base TPS do I need to re-pin the TPS plug? Thank you!
@VTECAcademy
Жыл бұрын
I believe you need an RSX Type S compatible TPS for the Skunk 2 throttle body. And, you need to re-pin the TPS sensor.
Supposedly a bigger throttle body doesn’t even gain power at all, unless head work is performed. People swap manifolds, and throttle bodies just for looks. The biggest cheapest gain is power is an intake short ram or cold air intake, vs stock plastic intake box. Besides that any time you want to see power, you have to have a healthy bottom end, drop in cams, FBO and tune
@dragan3290
Жыл бұрын
I put a 65 mm TB on a Buick based Aussie version v6 vp commodore, then a cold air induction, iat resistor mod , shift kit in rhe turbo 700. The TB from 60 mm? Instant response and more push in the seat! Ecotec v6 is starved in standard trim.
Can you use the base model RSX engine harness for a kswap ?
@VTECAcademy
4 жыл бұрын
Yes you can. Look at the previous video on the RVS Lockout wiring.
@chamros1153
4 жыл бұрын
@@VTECAcademy will do! thank you
i have a 70mm skunk 2 pro tb can i run it on my stock 02 rsx type s without a tune till i can get a tune ? will it affect much if i dont get tune ?
@nicolasdujardin5691
3 жыл бұрын
I wouldn't recommend it... it wont run smooth, you'll have a rough idle , and maybe some stuttering .. Your letting in more air, but not more fuel, and that will be your problem, your AFR will be messed up... i recommend waiting till you can tune it.. You still have a stock intake manifold? Greetz
Anyone happen to know if I can run a TSX TB with the IM on my K24A4 (05 Honda Element)??
@VTECAcademy
2 жыл бұрын
it should bolt right up.
Soooo whens this crv harness video coming 😬😬😬
@VTECAcademy
3 жыл бұрын
I just recorded it. We'll try to have it up soon.
Why are you going with a 4-1 header as opposed to a 4-2-1 or hybrid style header?
@nicolasdujardin5691
3 жыл бұрын
A 4-1 header makes a little more power in the lower ranges of the rev range, and a 421 makes more power up top... so it's a bit of personal preference and the purpose of the build...
@Ehren1337
3 жыл бұрын
@@nicolasdujardin5691 i thought 4-1 is for top end only. 4-2-1 for midrange to top.
Great video Brian! I got an Accord K24a TB for my JDM K24a2 swap. Question is what cable bracket bracket do I use? The accord bracket mounts to the manifold not the TB like the others.
@VTECAcademy
4 жыл бұрын
What manifold do you have?
@1stGenCRXs
4 жыл бұрын
VTEC Academy will be the stock K24a2 RBB
@VTECAcademy
4 жыл бұрын
@@1stGenCRXs If you have the Accord manifold and Accord or Element bracket, use an Element throttle cable with it.
@rhb47150
4 жыл бұрын
Is the accord throttle body bigger than the RSX type S
How big is the throttle body for a K24A4 engine?
@Esdru221
11 ай бұрын
60mm
I have a 2004 honda accord k24 and I put a 70mm throttle from 2006 acura rsx type s and I put on tps sensor from the type s now I have tps sensor issues I need to rewire the the TPS sensor need help thank you 🙏
@VTECAcademy
11 ай бұрын
Is it showing .5V at fully close throttle?
Can I put a 2.4l Accord throttle body on a 2.0l?
@VTECAcademy
2 жыл бұрын
That depends on the manifold.
I have a question. Its my first K series build and I am trying to put an accord k24a4 TPS on a skunk2 alpha 70mm throttle body. I can not get the TPS to line up with the throttle body shaft due to it being clocked a bit different. I'm assuming I need a type s TPS? Thanks for your time!
@VTECAcademy
3 жыл бұрын
You'll need the Type S TPS
@GunSnob
3 жыл бұрын
@@VTECAcademy I appreciate the reply. Thank you sir!
Is the usdm EP3 throttle body the same as the rsx type s?
@VTECAcademy
4 жыл бұрын
Yes.
@lafave2555
4 жыл бұрын
@@VTECAcademy Thanks!!
Do you always have to do a throttle body learn procedure everytime you take it off?
@VTECAcademy
2 жыл бұрын
Every time you reset the ECU. Unless you have a new throttle body.
@realtruth97
2 жыл бұрын
@@VTECAcademy I took my thottle body off to clean it and it was acting up until I resetted the ecu and calibrated the TBI. Now it runs perfect again.
Where the link for the pin tool?
@VTECAcademy
4 жыл бұрын
It's up!
@vse0
4 жыл бұрын
@@VTECAcademy i can't find the link.
What oem throttle body would fit a rsp intake manifold? Thanks
@VTECAcademy
Жыл бұрын
Drive by wire would be the J-series throttle bodies and drive by cable would be the Accord K-series T-bodies.
@danjko888
Жыл бұрын
@@VTECAcademy does it matter if the accord is a manual or automatic trans cable driven tb? Thanks
I have a 04 ep3 and wanna do a throttle body upgrade. What do you suggest?
@VTECAcademy
Жыл бұрын
It isn't really necessary on the 160HP K20A3 engine. Have you done other modifications?
@kawirider_804
Жыл бұрын
@@VTECAcademy none at al
I just got a 70mm throttle body , hopefully it won't effect my tune?
Quick question to anyone can help please. I have 2008 tsx i would like to put rbc intake manifold and I think a zdx tb . This would be plug and play? Thanks!!
@VTECAcademy
3 жыл бұрын
I believe both of those are a direct bolt and plug and play.
@200horsepower
3 жыл бұрын
@@VTECAcademy thanks!!
@ivantsipr
2 жыл бұрын
No, ZDX TB will need an adapter, also you'll need flashpro to tune it since that IM +TB will let a lot more air in, probably you'll need RDX injectors too since stock ones will be running maxed out (K24a2 with I/H/E can max stock injectors pretty easily)
What throttle body can I use on my 2000 Honda civic ex?
@VTECAcademy
3 жыл бұрын
Aftermarket or stock but larger?
@juantrejo7084
3 жыл бұрын
@@VTECAcademy stock but larger.
@VTECAcademy
3 жыл бұрын
@@juantrejo7084 The B16 throttle body from the 99-00 Civic Si. Or the Integra GSR throttle body.
I can't find any throttle bodies for honda crv 1999 ex b20 what alternatives do I have
@VTECAcademy
2 жыл бұрын
Off the top of my head, I would look at the 98-01 Integra LS/GS throttle bodies.
@MikeTheHooper707
2 жыл бұрын
@@VTECAcademy hey thanks alot for the quick reply I'm in a moving process and had to replace my throttle body since my old one was defective I ordered one already since it's so last minute but it may not fit it just had the same orientation (sensors in right place, hoses, etc)
@MikeTheHooper707
2 жыл бұрын
Any other throttles i heard maybe the rs integra 90-93 as well
Aren’t you supposed to wait 3 seconds and throw after pulling the pin out?
@VTECAcademy
4 жыл бұрын
After consulting the Book of Armaments, "First shalt thou take out the Holy Pin. Then, shalt thou count to three. No more. No less. Three shalt be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, nor either count thou two, excepting that thou then proceed to three. Five is right out." You are correct. - Monty Python and the Holy Grail
Where you guys located?
@VTECAcademy
4 жыл бұрын
VTEC Academy is in Phoenix AZ, but we aren't a shop.
@supers0nic77
2 жыл бұрын
@@VTECAcademy hey that's where i live. Tune kpros? Also i think i put the wrong tb on my k24a. I got an accord one but it was auto not manual. What's the difference?
What year Accord throttle body bolts on RBC, RRC manifold?
@BrianGillespie_brianathasport
3 жыл бұрын
For drive by throttle cable 2003-2005.
@stinky15552
3 жыл бұрын
@@BrianGillespie_brianathasport thanks but I meant other regular style TB cable operation like 2002 RSX Type-S. Thanks though enjoy the videos and content.👍
@BrianGillespie_brianathasport
3 жыл бұрын
@@stinky15552 you want to use the 2003-2005 Accord DX throttlebody on the RBC and RRC.
@raysb240sx
2 жыл бұрын
Does it have to be from a manual or will one off an automatic work as well?
@stinky15552
2 жыл бұрын
@@raysb240sx long as its cable driven not drive by wire. I got mine off amazon but remember if tps sensor is facing up have to flip around the the out wires around 123 normal to 321 also may have to make custom throttle cable stay bracket. See what Brian says also. I got mine off amazon just make sure its 2003-2005
I'm using an 05 accord throttle body on my k24a rbb. I realized later that i bought one with a part number from an automatic car. What's the difference and do i need to buy one from an manual? Also the accord one is pretty small but rax is only 2mm more. Should i just get a different TB altogether?
@VTECAcademy
2 жыл бұрын
For 200 hp the Accord TB is big enough. The. auto or manual throttle body fits fine on the RBB. If you have an RBC or RRC then you need the Accord DX (auto or manual) throttle body.
@supers0nic77
2 жыл бұрын
@@VTECAcademy i couldn't figure out the difference between manual or auto they have different part numbers. The manual one much harder to find. Anyways I'm on an rbb manifold not much room on the firewall since it's in an mr2.
@supers0nic77
2 жыл бұрын
@@VTECAcademy also since you're here do you do dyno tuning? I'm local to you. My engine is stock besides bolt ons
@VTECAcademy
2 жыл бұрын
@@supers0nic77 We usually use Tim at Xact Dyno.
@VTECAcademy
2 жыл бұрын
@@supers0nic77 I'll have to do a direct comparison. I can't think what the difference might be.
Is it possible to make a RBB intake manifold from honda accord work on a k20a3 from a 2005 acura rsx/JDM honda integra?
@VTECAcademy
3 жыл бұрын
Yes, but you would have to trim part of the manifold so the upper radiator hose inlet from the A3 could be installed.
@alexdlion4180
3 жыл бұрын
@@VTECAcademy thanks for the info...appreciate it