Angel eyes and dynamic LED turn signals [Tail lights retrofit modifications HOW-TO] Alfa Romeo 159
Автокөліктер мен көлік құралдары
Something really new and unusual for Alfa Romeo 159/Brera/Spider - tail lights retrofit modifications: angel eyes and dynamic LED turn signals.
How to DIY step-by-step instructions without opening the lights:
00:17 Step 1: Remove the taillights
Remove the tail lights. You need to disconnect the wire connectors, unscrew 3 nuts with wrench number 8 at each light housing part and push it out.
00:28 Step 2: Remove the bulbs and wipe the lights
Remove the bulbs holder and a sealing rubber, wipe the lights.
00:35 Step 3: Measure and cut off LED strips
Flexible LED strips in a silicone transparent casing with side glow will be used as an element for the angel eyes.
Link to buy: ali.ski/Otpoy
Measure and cut off 2 strips 13cm long (for lights on the trunk lid), and 2 strips 15cm long (for side lights)
00:41 Step 4: Stick matte tape
Also, for better and softer light diffusion from the LED strip, stick a half-transparent matte tape on the top side.
00:48 Step 5: Stick double-sided tape
Stick double-sided tape for secure to the taillight housing.
00:55 Step 6: Measure and cut off silicone sticks
So that the light from the LED strip does not look too thin inside the taillight, on top of it add silicone flexible sticks with a 10mm diameter, cut them in half, two 14 cm long and another two 16 cm long (respectively for the lights on the trunk lid and for the side ones)
01:02 Step 7: Put LED strips and silicone sticks inside the tail light
The most exciting moment is stuffing LED strips inside the tail light. With my medium length fingers and thanks to the flexibility of the tape, all this can be done without opening the housing - through the hole for the bulbs.
After successful placement of the tape, place previously prepared silicone sticks on the top of it.
Repeat this for the rest of taillights with strips and silicone sticks into the holes with a red reflector.
01:16 Step 8: Final check
Performance check - connect to 12V power source and look, check that the tape is installed and shines evenly.
Done!
But that’s not all...
01:21 Dynamic (sequential) LED turn signals in 3 steps
01:23 Step 1: Sequential lamp ignition modules
For this we need modules for sequential ignition of bulbs for Ford Mustang.
Link to buy: ali.ski/vdggQ
The module has a wire for incoming voltage (+) from the turn wire (red color), and a black ground wire (-).
And 4 outputs - 3, respectively, for each sequential light bulb, and a ground (-) wire
01:26 Step 2: LED bulbs with dual function
Also we need LED bulbs with dual function (used for DRL + turn signal) - white glow (for brake lights and rear fog) and orange - for turn signals.
Link to buy: ali.ski/uCd7Z
Standard turn signal bulb lefts without changing and stays in place.
01:29 Step 3: Install the bulbs and connect wiring
Install the bulbs in the appropriate places and connect everything to the car's wiring.
Angel eye power wire (+) to the position lights wire, ground wire (-) to the car’s ground wire.
Bulbs additional power wire (+) to the brake/rear fog light wire, and the main power wire (+) to the sequential light bulbs module, ground wire (-) to the car’s ground wire.
Done!
Let's see the result: 01:35
Do you like the result? Like or dislike?!
Don't forget to leave a comment and share with your friends!
Subscribe to my channel for new ideas and videos!
#alfaromeo #angeleyes #taillight
Car specifications, modifications and other videos:
- Engine 2.4 jtdm 20v turbo diesel, Q-Tronic automatic transmission
- Exhaust: removed catalysts and DPF, downpipe, straight pipe, cut-off valve with exhaust sound control, rev limiter popcorn: • Exhaust crazy turbodie...
- EGR OFF, removed swirl-flaps, remap 250 hp 480 Nm, acceleration 0-100kmh: 6.7sec, Q-Tronic software update: • Alfa Romeo 159 2.4 jtd...
- 19" inch alloy wheels INFORGED iFG 26 (Veemann V-FS 26): • Getting pleasure with ...
- Six bi-projectors headlights, corner lights, welcome lights, follow me home: • Headlights tuning [6 p...
- Custom grill Giulia-style: • Grill scudetto Giulia ...
- Eibach Pro-Kit springs -35mm, wheel spacers 20mm front and 7mm rear, EBC Ultimax brake discs and hoses, TI sideskirts, chrome mirror covers
- One year with Alfa Romeo 159: • One year with Alfa Rom...
- Winter snow drift: • Snow drift and acceler...
- Adventures with Alfa Romeo 159 in video game style: • Alfa Romeo 159 adventu...
- How I wash my Alfa Romeo: • Alfa Romeo 159 TI Car ...
--------------------
Filmed with DJI Osmo Pocket and DJI Mavic Air
AGST - Emotions (Epidemic Sound) www.epidemicsound.com/track/3...
GET FREE MONTH SUBSCRIPTION: www.epidemicsound.com/referra...
================
I’m in social networks:
Instagram: / nikolaskolis
Facebook: / nikolas.kolis
Пікірлер: 495
The niciest 159 ever existed. I simply adore it.
@NikolasKolis
3 жыл бұрын
thank you very much!
The product quality of this video is next level
@NikolasKolis
3 жыл бұрын
I am very pleased to hear that! 🙏🙏
BRUTALNO!!! Kao i uvek... SVAKA CAST!!!👍👍👍
@NikolasKolis
3 жыл бұрын
hvala mnogo!
Классное видео! 👏 Не зря так долго ждали 🤗 Давай вливайся в ютуб-трафик и радуй нас видосами чаще!!!
@NikolasKolis
3 жыл бұрын
пальцы, подписка, колокольчик!
Boże jaki to piękne
@NikolasKolis
3 жыл бұрын
właściwy wybór!
Kao i uvek - ODLIČNO! :)
@NikolasKolis
3 жыл бұрын
hvala brate!
Odlican video, velika pohvaka za objasnjenje i ne moze prostije da bude, bez muke za otvaranjem stop lampe, prosto jako, bavim se autoelektikom i to mi nije palo na pamet, sad je vec kasno da se igram sa mojom Alfom 159 Ali vec sutra i ona dobija angel eyes stop. Samo tako nastavi sve podrske
@NikolasKolis
3 жыл бұрын
hvala lepo! srecno!
It looks AMAZING! Svaka cast💪🏼
@NikolasKolis
3 жыл бұрын
thank you puno!
I used to do a lot of modifying of my own, many years ago on Alfetta's, 75's and Giulia's, but grew older and tend to prefer keeping things stock on my current 159 SW. Yet, probably also because you've presented this in another highly professional footage, I'm tempted.... great job, looks the business! 👍
@NikolasKolis
3 жыл бұрын
I understand and accept your thoughts, but I think that 159 is not yet quite old to add something fresh, so I'm experimenting :D thx!
@tamerlanibragimov1611
3 жыл бұрын
@@NikolasKolis I hate most of the tuning parts being offered nowadays. Especially bmw like angel eyes or back lights made in Poland or Turkey, but your car, in spite of all the modifies you made, still looks like a fabric model and this is what I love about it. Special respect regards to the fact that you made all by your own and things like front lights are unrepeatable for most of the 159 owners like me. Great job, Nico! You've made a 159 icon.
@NikolasKolis
3 жыл бұрын
@@tamerlanibragimov1611 totally agree with you about things that are looking strange and alien to Alfa Romeo, but, since I love something unusual, I try to do it the way it would look if it was done at the factory! Thank you for such pleasure words! Большое спасибо!
Перфектно! Когато си купя 159 3.2 скоро, това ще е от първите неща, които ще направя
@systoyanoff
Жыл бұрын
Купи ли си?
Fajny efekt! Zajebisty film!
@NikolasKolis
3 жыл бұрын
dzięki bardzo!
great job, great car, and this look....
@NikolasKolis
3 жыл бұрын
thank you so much!
Perfect work! Congratiolations from Portugal!!!
@NikolasKolis
3 жыл бұрын
Thank you! Greetings to you!
Красивая и хорошая машина требует к себе хорошего и аккуратного ремонта!!! Видео супер,отличный монтаж👍👍👍
@NikolasKolis
3 жыл бұрын
точно сказано! большое спасибо!
Very nice quality video. Great job!!
@NikolasKolis
3 жыл бұрын
thank you!
Bro awesome work and beautiful alfa!!!
@NikolasKolis
3 жыл бұрын
Thank you so much!
Bravo bro много добре изглежда като цяло АЛФАТА 😉👍
@NikolasKolis
3 жыл бұрын
много благодаря!
Mistrzostwo! Zabieram się do pracy!
@NikolasKolis
3 жыл бұрын
Dzięki!
@grzegorzborowicz2802
3 жыл бұрын
@@NikolasKolis A jaki kolor wybrałeś 1156 BA15S , 1156 BAU15S, T20 7440?
@NikolasKolis
3 жыл бұрын
1156 BAU15S
@markorn8724
3 жыл бұрын
@@grzegorzborowicz2802 daj znać jak wyszło...ja też już zamówiłem ale zrobię bez efektu angel eye choć zajefajnie wygląda, mam nadzieję że przegląd przejdzie 😁
@markorn8724
3 жыл бұрын
@@NikolasKolis mocno się różnią?
That looks fxcking epic! 🔥🔥🔥
@NikolasKolis
3 жыл бұрын
Thank you 👍👍
Bas brutalno svaka čast
@NikolasKolis
3 жыл бұрын
hvala lepo!
That back end is looking mean!
@NikolasKolis
3 жыл бұрын
and a little tricky :)
Шикарно получилось. Респект
@NikolasKolis
3 жыл бұрын
благодарю!
Дело, мастера боится! Спасибо!
@NikolasKolis
3 жыл бұрын
что есть то есть :)
Odlican posao!
@NikolasKolis
3 жыл бұрын
hvala lepo!
You really love your car. Great idea bdw!
@NikolasKolis
3 жыл бұрын
Oh yeah! Thank you!
svaka čast majstore
@NikolasKolis
3 жыл бұрын
hvala hvala :)
Супер видос🎉
Вчера точно си мислех за нещо такова, браво!
@NikolasKolis
3 жыл бұрын
мерси! имаш сега инструкцията :D
@shomy7318
3 жыл бұрын
@@NikolasKolis Остава да намеря от къде да закупя материалите.
@NikolasKolis
3 жыл бұрын
@@shomy7318 виж описанието под видеото има линкове за лентите, крушките и модулите ;)
@shomy7318
3 жыл бұрын
@@NikolasKolis Благодаря ти много! Ще ти следя канала с удоволствие!
izdominirao si,po dobrom starom obicaju.... ps:zelim ovo na mojoj 156 hehe....pozzz drug
@NikolasKolis
3 жыл бұрын
hvala druze! trudim se da dominiram ahahah
Amazing 🔥👍🥰
@NikolasKolis
3 жыл бұрын
Thank you 👍👍
Wow, everything about this video was awesome...... and the way the car looks, SO SEXY! Triple thumbs up lol
@NikolasKolis
3 жыл бұрын
thank you veeeery much 🤗
Очень интересный и познавательный пост. Вот автомобиль СУПЕР.
@NikolasKolis
3 жыл бұрын
благодарю!
@jasurjas7602
3 жыл бұрын
@@NikolasKolis ya zdes.
Welldone 👍👍👍
@NikolasKolis
3 жыл бұрын
thank you!
Wow great job.... I just made the order from your links and see how it goes.... my regards from greece..
@NikolasKolis
3 жыл бұрын
thank you!
I'd love a few more insights on that sequential turn signals! they look dope
@NikolasKolis
3 жыл бұрын
ask me I'll try to help ;)
Hands down best looking car of that age
Машина мечты)
Svaka cast
@NikolasKolis
3 жыл бұрын
hvala!
Yes I like it - A LOT
@NikolasKolis
11 ай бұрын
thx
Very nice 👍
@NikolasKolis
3 жыл бұрын
Thank you!
Congratulations are a sight. I like how you did it because it is a minimally invasive job. You may have spent time on rehearsal but you haven't opened the lights. Now I would like to do it too and I would like to have all the links to buy the right material and a description to do a good job. Bravo really good.
@NikolasKolis
3 жыл бұрын
thank you so much! you have all links to buy parts you need in the description to this video ;)
Pięknie 💪👍
@NikolasKolis
2 жыл бұрын
dzieki
@sebastiaszymiczek3332
Жыл бұрын
Można zamówić takie lampy
Super👍😎
@NikolasKolis
3 жыл бұрын
thank you! 👍👍
Great!!!! VERO STILE ALFA..!!
@NikolasKolis
3 жыл бұрын
Grazie mille!
Bellissimi
@NikolasKolis
3 жыл бұрын
Grazie!
why do you drive so close to the wall, T^T... almost had a heart attack.
@NikolasKolis
3 жыл бұрын
I was very much afraid of this ownerless bath ahahah
@tamerlanibragimov1611
3 жыл бұрын
me too. Especially after scratching my bumper of a wall in the garage.
Круто смотрится
@NikolasKolis
3 жыл бұрын
благодарю!
I must do this on mine 😍
@NikolasKolis
3 жыл бұрын
let's do it!
Classe 👍👍
@NikolasKolis
3 жыл бұрын
👍👍
Она восхитительна
@NikolasKolis
3 жыл бұрын
благодарю!
Very nice...
@NikolasKolis
3 жыл бұрын
thank you!
Отлично смотрится, спасибо за видео. Не так уж и много подобной инфы по красавице 159 Хотел бы уточнить детали по подключению проводов итд, но ток если есть время это все описать ^^
@NikolasKolis
3 жыл бұрын
Большое спасибо! Загляни в описание к видосу, там расписал более-менее, если останутся вопросы - задавай, расскажу/объясню как смогу )
@chaviechase551
3 жыл бұрын
@@NikolasKolis Принял,уже после того, как пост написал ниже нашел описание, благодарочка )
Не столько сама переделка понравилась, сколько видос.:)
@NikolasKolis
3 жыл бұрын
Хаха 😂 спасибо!
Szuper!
@NikolasKolis
3 жыл бұрын
thank you!
This looks so sick. Love the style the video is filmed! Gives me an idea if it would also work on my lancer
@NikolasKolis
3 жыл бұрын
thank you! yeah, it will look great on lancer x too, we have a bit similar tails :D
@BlazingMusic01
3 жыл бұрын
@@NikolasKolis yeah exactly. Just have to see if the insides are the same if it will work
@NikolasKolis
3 жыл бұрын
@@BlazingMusic01 let me know ;)
TOP!!!
@NikolasKolis
3 жыл бұрын
thx!!!
колата е брутално яка
@NikolasKolis
3 жыл бұрын
мерси!
When will you produce a version for the Alfa GT? These look fantastic and really enhance the unique Alfa look. A Front Lights option would be amazing too.
@NikolasKolis
3 жыл бұрын
uhh good question :D I'll think about that ;)
@Gandalf606
3 жыл бұрын
@@NikolasKolis - thanks Nik. Just thinking how it would transform my GT 3.2 V6 :-)
Take all of my money now! This would look awesome on my SW
@NikolasKolis
3 жыл бұрын
ahahaa :D its true, will look awesome on SW too ;) you have links to purchase all you need to do it in the description for this video
@snoopdutt1985
3 жыл бұрын
@@NikolasKolis just none of the skill to do it 😁
@NikolasKolis
3 жыл бұрын
@@snoopdutt1985 just try :D not so complicate
Супер се е получило!
@NikolasKolis
3 жыл бұрын
благодаря!!
@vininio
3 жыл бұрын
Мислил ли си за монтаж на Touch Screen навигация/музика/телефон?
@NikolasKolis
3 жыл бұрын
@@vininio имам такава instagram.com/p/B4kk_AJgX_C/?igshid=b6gf2o23kd4g
@vininio
3 жыл бұрын
Трябваше да предположа🙂 Каква марка и модел? Ти ли я монтира или в сервиз? Аз не мога да се реша, страх ме е да не прецакам нещо🙄
VOT MASHINA,,,,,,,, SUPER!!!!!!!
@NikolasKolis
3 жыл бұрын
👍👍👍👍
Final result starts at 01:35 Let me know in comments what do you think? LED strips: ali.ski/Otpoy DRL+Turn signal bulbs: ali.ski/uCd7Z Dynamic (sequential) bulbs ignition module: ali.ski/vdggQ
@furiorichini4091
3 жыл бұрын
Very good job
@NikolasKolis
3 жыл бұрын
@@furiorichini4091 thank you!
@lukaszr8817
3 жыл бұрын
Hello Nikolas, good job, I think I'll do it at home too, but I have a question how many and what should these bulbs be (3 per lamp)?
@NikolasKolis
3 жыл бұрын
@@lukaszr8817 hello and thx! 2 dual-function bulbs + 1 normal signal light bulb lefts on place / per lamp
Nice job! #LaMeccanicadelleEmozioni
@NikolasKolis
3 жыл бұрын
thank you!
Золотые руки
@NikolasKolis
3 жыл бұрын
Благодарю!
Hey mate, love what you have done to your Alfa! Looks great! What are the silicon sticks and tape that you’re using? Thanks.
@NikolasKolis
2 жыл бұрын
hi! thx :) silicon sticks are from hardware store, tape is usual semitransparent tape
Браво чудесна работа, бързо, лесно, евтино и най-важното - ефектно! 😃 Понеже знам колко си обичаш и цениш колата, искаш ли да ти отправя едно предизвикателство!? 😃 Опиши ми на лично съобщение в Месинджър проект на стоповете на 159 за които си мечтаеш - Твоят проект, твоята визия за мечтаните стопове!!! Пък да видим дали ще може да го изпълним!!! 😉😁
@NikolasKolis
3 жыл бұрын
благодаря много! ще ти напиша :)
Hi love the lights makes it look alit more modern I was wanting to do the same on my 156 but how do you wire the sequential indicator when one of the lights in the boot?
@NikolasKolis
3 жыл бұрын
thank you! I put additional cables to the boot :)
I like your car
@NikolasKolis
3 жыл бұрын
Thank you!
Absolutely gorgous, gives a different edge to the rear, extra mean. The way you created the video and angles you shot, superb. One question, if you're still running this car or perhaps someone else please. Confused about step two. Do we need replace all the bulbs with some type of dual function or just one dual bulb each left and right? Plus I'm so confused on how its all wired. Also what are the silicone sticks? Thanks
Hi Nikolas. My last message does not appear to have posted. Could you provide a video or diagram for connections for the dynamic turn signals. I've got all the parts but the connectors are not common so it is a bit confusing! Also the comments regarding resistors are only for the angel eyes, correct, as the bulbs have resistors already connected? Thanks.
Show!
@NikolasKolis
3 жыл бұрын
👍👍
Bonjour, merci pour cette vidéo qui et superbe j'ai une question je suis entrain de faire la même chose que toi et je bloque sur l'alimentation de la veilleuse stop car j'ai toujours la veilleuse allumé de l'ampoule ! Comment tu fais pour le branchement merci
Greetings from Italy 💪🏼💪🏼
@NikolasKolis
3 жыл бұрын
Salutare!
Like Calibra tuning...
@NikolasKolis
3 жыл бұрын
what does it mean?
My problem is what kind of modules did you have for sequential ignition? If you can tell me the exact type i can made the same as you but mine now not blinking just when i turn on it's just on whit the led strips. :) I hope you remember the modul types. Thanks in advance and awsome videos.
It look amazing. Whis alfa is AWD?
@NikolasKolis
3 жыл бұрын
thx! its FWD automatic
More beutiful angel here ❤️ But how about evaporation?
@NikolasKolis
3 жыл бұрын
thank you! no evaporations, everything is fine ;)
Looks great! I bought all I needed, but when I connect the right side bulb of the outer tail light, which should only light up when the break is pressed down, it flickers all the time. When I press the brake it lights constantly as it should but all the time when it's not pressed it flickers. Did you put additional resistance?
@eminem8612
2 жыл бұрын
And also how did you fit the drl lights under the plastic bulb holder? Does it even snap in place?
Top
@NikolasKolis
3 жыл бұрын
thx!
Auto je brutalan, svaka cast! Dizel ili benzin? Koje su ovo felge? Hvala i pozdrav iz Stuttgarta!
@NikolasKolis
3 жыл бұрын
hvala lepo! dizel 2.4 q-tronic felge inforged ifg26 (aka veemann vfs26) kzread.info/dash/bejne/nnaGzMWxn6zgktY.html Pozdrav!
Helloo, best and top modification, i have 3 questions, 1: Led strip needs resistors for no error?... 2: Where did you get silicone sticks? And 3: Led strip color is only white?.. thank you
@NikolasKolis
3 жыл бұрын
Hi! Thank you! 1 - Yes, need resistors 50w6j 2 - in a hardware store 3 - yes, only white color
Heyhey! I've got a question for you regarding the remapping of the ECU and the clutch. How long ago/how many km ago did you remap it and how's the clutch on that?
@NikolasKolis
3 жыл бұрын
I dont have clutch because of automatic transmission, anyway I made remap 80 000 km age and everything is just fine
Super ! Pour les deux feux de reculs, vous avez simplement commandé le feux arrière de la version anglaise ? Cela nécessite un recablage du feu ? Sur quoi avez vous repiqué l'alimentation des leds ? Sur le faisceau directement ou avez vous remplacé la cosse originelle ? Merci d'avance !
@NikolasKolis
3 жыл бұрын
yes, GB version second reverse light, and 3 min with wire change for that. The original output did not change, I connected it directly to the wiring
Alfarimeo? Like
@NikolasKolis
3 жыл бұрын
👍👍
You bought white or red led strips? Congrs , great work!
@NikolasKolis
3 жыл бұрын
white for more warm color in finish, red for more cold color in dfinish. both will be red but with a bit different shade& I used white :)
@elgritone
3 жыл бұрын
@@NikolasKolis thanks!
nope i dont like it.. But JUST LOVE IT !!!!! 😍😍😍 Alfa
@NikolasKolis
3 жыл бұрын
hahahaha :D thank you!
Nice work 👌 whitch size of exhaust pipes, 100or 114mm,,?
@NikolasKolis
6 ай бұрын
thx! 105 :)
Hello ! Do you have a link for the silicone sticks I don't see it anywhere ... You do 4 resistors or just 2 ? Thanks !
Show more details about wireing and where to buy the products
@NikolasKolis
3 жыл бұрын
please check description to this video, you will find links for purchase the products and info about wiring. If you'll have more question feel free to ask me there
Очень круто 👍
@NikolasKolis
3 жыл бұрын
спасибо! 👍👍
Good job?👍👍
@NikolasKolis
3 жыл бұрын
thx?👍
Hello, thanks for the video! I've noticed that the parking light and braking light are on the same bulb. How did you manage to keep only brake light on that bulb? thanks
@NikolasKolis
3 жыл бұрын
Hi! Parking lights connected to the "angel eyes rings", and brake light becomes only one
@TeoAdi
3 жыл бұрын
@@NikolasKolis Ok thanks, I'll try that 🍀
Hello!!! I have a 2.4 jtd van and I will try to do what you did! but I have doubts... what light exactly do you order in the leds for the half moon?! red to orange or white to orange? and another doubt is which number of the 3 available for purchase you choose in the last link!!? already in the description you mention that there are 2 for the brakes and 2 for the change of direction, but in the link you mention, it only has for the change of direction!! use the same?! there are 4 led lamps I have to buy?!
Hi there. I did this to my 159sw and it’s awesome. But these days the temperatures are very high and I see the silicone sticks are melted down. I don’t know what is their melting temperature but be sure you use sticks with higher melting temperatures.
@NikolasKolis
2 жыл бұрын
Hi! Yesm I use 300+ celcious degrees melting, and have no any issue with them. Try to find similar and change
@radostinpetrov5313
2 жыл бұрын
Thanks, I’ll change them.
Światła świetne :O , zmiana przeciwmgielnych na dwie strony i wstecznych również na dwie jak najbardziej na plus zwłaszcza że te pojedyncze wsteczne daje bardzo mało światła. Kierunkowskazy ? Hmm.. jak dla mnie to trochę przesada, myślę że styl całych świateł czyli te trzy osobne hmm komory nie pasują do tego typu kierunkowskazów. Tak czy inaczej, bardzo fajny pomysł, podoba mi się i chciałbym takie :D (bez kierunkowskazów :P ) Pozdrawiam serdecznie :) Bardzo ładna alfa
@NikolasKolis
3 жыл бұрын
bardzo dziękuję za komentarz i opinię! doceniam to
Nice job 👍👍👍 Who did software for u?
@NikolasKolis
3 жыл бұрын
thx! 👍 which software do you mean?
Hey, really nice project! I have a few questions regarding this: The LED strips are always on as soon as your turn on the car right? If so what color are the LED strips and where did you connect them? because on the link you gave they also have the ones that change color. The silicone tubes are glued to the lights or they just fit in with pressure?
@NikolasKolis
3 жыл бұрын
Hi! Thank you! LED strips are not always ON, only when position lights ON. Color is only white (they have more variants, select "only white") Silicone tubes are just fitted with pressure, no glue or tape :)
@Ricardo-zz7mz
3 жыл бұрын
@@NikolasKolis great, thanks a lot! Love your project and what you did to the car! Keep at it! ;)
@NikolasKolis
3 жыл бұрын
@@Ricardo-zz7mz thx mate !
Hi ! I saw the alpha 159 tail light tiing video! Let me ask you a question: where and what is the name of that sequentials module! Where did you order!
@NikolasKolis
3 жыл бұрын
Hi! Check in description to this video there is a name and link to order
Is that an after-marked RHS rear white reversing lamp? Mine is a red fog lamp and I'd be keen to change it...
@NikolasKolis
Жыл бұрын
its from RHD car
looks great! Can you add the link to buy the led strip and also link to buy led bulbs just to replace the existing ones without the sequential ignition (this is not legal in my place)
@NikolasKolis
2 жыл бұрын
thx! all the links you can find in the description to this video
@nirdabastani2363
2 жыл бұрын
@@NikolasKolis i am looking to replace the backlight brake bulbs with led, similar to what you show but not dual function