Thank god someone with common sense. Thanks man. Everyone was posting it without a full charge and turning it on and i thought it was weak. Now I know they’re not too bad

@petelikes

Жыл бұрын

Oh they’re worth having a pair. And buying the optional blade whenever it becomes available.

Best review out so far finally thanks

@petelikes

Жыл бұрын

Thanks 🙏🏽

@cdblends2514

Жыл бұрын

Only review out 😂

@petelikes

Жыл бұрын

@@cdblends2514 just trying to make it easy for people like us to decide if it’s worth the purchase…. I’d say yes. Andis should cut us a check 🤣

Truthfully, being a barber, buying clippers are not only a write off but an investment in your craft.

@petelikes

Жыл бұрын

Absolutely! I agree 1000%

First real review

@petelikes

Жыл бұрын

Which is exactly why I posted. Thankyou

Great review brotha!

@petelikes

Жыл бұрын

Thanks bro

Solid review 👍🏽

@petelikes

Жыл бұрын

Thanks.

Great review. ! I’m waiting on mine !

@petelikes

Жыл бұрын

Hope you like them. I do

@oskr05k

Жыл бұрын

Bro. I can’t even use them on a client. The blade pops off when I use the lever n the clipper on. Check out the short I just Made for it

@petelikes

Жыл бұрын

@@oskr05k look at how you’re intentionally forcing the lever. Duh. That’s going to happen. Just move the lever slowly or slightly loosen the lever screw for smoother fluidity. Now you could have a faulty clipper. It’s possible. If you send them to Andis they’ll replace them or fix the issue free of charge.

Great review ❗⭐ thanks for sharing 🔥

@petelikes

Жыл бұрын

🙏🏽😉

Those look nice

reminds me of the Andes trimmers they have back then corded that you can detach the T blade and put on the shaver

@new2POOL208

Жыл бұрын

I had that flop

I love the master

Doing a hair cut with them to see how they perform would have been nice.

@Isaac1ofone

Жыл бұрын

😂

@petelikes

Жыл бұрын

They perform well....No frills... so I chose not do a cut video at the time of making this video. I used them on a client during a phone call and they weren't as loudly annoying as other Andis clippers...Hope that helps?

@onlyoneromeo

Жыл бұрын

@@petelikes nope. We want video lol

@petelikes

Жыл бұрын

😂I can hardly see how a video of them in use is going to convince anyone to buy them. Just sayin. Most of my clientele aren’t likely to be open to me doing that unfortunately. Definitely gotta respect their privacy 😉

@onlyoneromeo

Жыл бұрын

@@petelikes you would be surprised . A lot of barbers do comparison videos of one clipper on one side and another on the other side and discuss the different nuances between the two. It makes for an interesting video.

awesome video ! I noticed the blade on this black reVite is the same as Andis Envy Li fade blade and I assuming the Andis Alloy Pro blade is on the the other Revite blade.

@petelikes

Жыл бұрын

Just did comparisons. You just may be correct. 👍 So… if one has a blade only issue then that’ll likely be the first option ($22) as opposed to buying the specific replacement blades for ($50). Just a thought 💭

So the taper blade for the Revite is supposed to open up to a 1. When I compare it to the Andis master it actually looks like it doesn’t open up as much. What are your thoughts?

@petelikes

Жыл бұрын

There is no real definitive size to clipper blade settings. It’s more of a guesstimate I’d say. Taper blades and fade blades open differently depending on how they’re adjusted.

Can you put on the other andis detachables like a bgrc. I’d literally only use these forever if they could use detachable blades and an adjustable in one clipper.

@petelikes

Жыл бұрын

Unfortunately no. They only have 2 blades for the ReVite. Fade and taper blades

Do you think the top phat master blade can fit on that step up?

@petelikes

Жыл бұрын

Don’t think so and wouldn’t try it my friend. Even if it was possible that particular blade’s weight would offset the clipper which is already light weight. Why would you want to make it heavier?

Does it have masters crunch sound?

@petelikes

Жыл бұрын

No crunch sound like the Masters because it doesn't have the more powerful cut rotations of the Masters cordless.

What about Double magnetic guards bro? Tnx. Great preview

@petelikes

Жыл бұрын

No not double but the single magnetic guards do.

@tydeshawn125

Жыл бұрын

Bet I have both

@CarlosTorres-vd1tk

Жыл бұрын

You can mode it to accept double magnetic guards

@petelikes

Жыл бұрын

If you’re going to spend the money on the clippers why not buy the single magnetic guards and stop modifying the clippers? Tampering with the ReVites are somewhat pointless. Just sayin.

They open as much as the masters?

@petelikes

Жыл бұрын

These blades are fade blades so no. They're adjustment isn't as open as Masters' taper blade.

Would you say this would replace the cordless masters?

@petelikes

Жыл бұрын

Absolutely NOT!!! Andis Masters are a workhorse of a clipper. Definitely not replaceable.

@ricardobrooks4337

Жыл бұрын

I’m asking, because I just bought the snap fx trimmer and clipper, and my plug was telling me these are coming out, other than the switching blades, what is the benefit of buying them?

@petelikes

Жыл бұрын

@@ricardobrooks4337 the BabylIss snap fx are ok products. I dont see why you would want or need these after making that purchase. If you’re not interested in spending more money to buy more clippers I’d suggest you go with your instincts. For myself personally, I only get the clippers that I feel will improve my workflow. There have been a few I’ve purchased and sold that I didnt care for. Babyliss has some I like and Andis has some I dont care for. I say get whatever you’re comfortable with my friend 😉👍

@ricardobrooks4337

Жыл бұрын

@@petelikes you are right, I was under the impression they would replace the masters, but, I’m good now

@petelikes

Жыл бұрын

@@ricardobrooks4337 Andis Masters are always going to be their top of the line clipper. Anything else they manufacture will only and always be secondary.

How do they cut?

@petelikes

Жыл бұрын

They cut well. Masters bulk cut is better but the Revites will still give an amazing cut. Remember the motor isn't as fast as the Masters.

There’s a lot of barber reviews saying they pop off during cuts ouch !!!

@petelikes

Жыл бұрын

I personally have not had that issue

Why the Masters sound like they in pain 🤣 all jokes aside I appreciate the comparison 🙏🏽

@petelikes

Жыл бұрын

The rotary motor in the masters are programmed to run full speed in order to provide the power. Unfortunately that’s going to make a bit louder noise. Hopefully as technology gets better this will change. For now the only choice for a quieter Master clipper is an electric one 😏

Where u get that from?

@petelikes

Жыл бұрын

You can order them from about anywhere online if you can’t find them at your local beauty supply. If it’s a problem they’re probably on back order. Remember Andis shipments come in from China so because of supply chain it may take a bit longer if you’re having trouble getting them. Be patient. They’ll eventually be everywhere soon.

Good review but I m over andis loud ass clippers for outrageous prices

@petelikes

Жыл бұрын

These aren't as loud and as costly as the Master cordless. As far as clipper prices goes, unfortunately 'us' the consumer have set the standards for prices. Now we have to expect "Professional" corded clippers to cost around $100+ and Pro cordless from $160-$299. I know..... it sucks.

Sound like the slim line pros

@petelikes

Жыл бұрын

But much more powerful 💪🏽

Do these cut like masters?

@petelikes

Жыл бұрын

No because of the less powerful motor but they do go through hair well and are lighter than the Masters. Remember it’s ultimately the barber who makes the cut look good 😉

@mcay4255

Жыл бұрын

@@petelikes Mos def 👍🏽

Do they cut like masters

@4cjayy

Жыл бұрын

And do they open to a 1

@petelikes

Жыл бұрын

All Andis clippers cut good but nothing compares to the Masters speed and performance. Can you complete a haircut with these and only these…. Yes. But not with the workhorse power of the Andis Masters. As far as the blade adjustment, it will depend on rather you get the white pair which features the taper blade (000-1) or black with the fade blade (00000-000).

Was hoping it brought a charging standing doc but doesn’t, it brings one blade, you gonna have to purchase the second blade separately that’s $50 extra and once the charging doc comes out you are looking at $300 plus dollars. Well done Andis not for the ppl.

@petelikes

Жыл бұрын

Pretty sure Andis is just trying to keep the price point within reason by offering a less expensive clipper. It cannot compete with a Master Cordless so I personally would use this as a secondary clipper. Its much lighter, ergonomic and cuts nicely. No negative complaints here......yet.

Crunch sound like the Masters? 🔥

@petelikes

Жыл бұрын

NO crunch. less revolutions in the motor. They perform well though. Not as aggressive as the Master so I wouldn't recommend bulk cutting with these.

@demodemo9698

Жыл бұрын

@@petelikes dang man. Andis let us down. This is their 100 year anniversary. You’d think they would have used this technology to upgrade the Masters. Smh

@petelikes

Жыл бұрын

@@demodemo9698 better battery and quieter would do it. Had to send a pair to Andis for battery replacement outside the warranty. I will assess the Master batteries will need replacement within 1- 2 yrs. Depending on usage.

@demodemo9698

Жыл бұрын

@@petelikes damn that sucks man. You should make a video on how to make them quieter. Haven’t bought one yet. Been waiting for a new drop

@petelikes

Жыл бұрын

@@demodemo9698 can’t quiet those pivot motors bro. They’re all a bit noisy. Andis places a thin foam sound dampening sheet and metal housing to make it as quiet as possible in the masters. These are quieter because of the less powerful rotary motor. Good torque in these rotary motors so that’s a good thing I guess.

Andis must hate charging docks 😵‍💫

@petelikes

Жыл бұрын

I just think Andis is just trying to keep the price point down on the revite. Docks are cool but aren’t necessary

I bought mine a month ago.....I was so ready.....the clippers are a disappointment. I have the black ones with both taper and fade blades. I wish I had my $219 back. Guess I will keep using my babyliss and wahls seniors😑😥

@petelikes

Жыл бұрын

I guess it’s a matter of opinion. I think the Revite is an good optional clipper to have because it’s lightweight and less fatiguing than heavier clippers. That was likely Andis intent when they crafted it. It is not a cordless Master. One shouldn’t expect it to be as miraculous a clipper. Babyliss and Wahl senior are just as efficient. So as stated it’s all a matter of preference my friend. 👍🏽

@formallyjacobs

Жыл бұрын

@@petelikes for 200 buck yes I expected it to be a clipper on the lines with babyliss.My wahls seniors cut a lot better and way less expensive.

@petelikes

Жыл бұрын

@@formallyjacobs true Wahl Seniors are been tried and true and they have not gotten crazy with their cordless clipper prices....yet. Unfortunately brands are averaging $200+ for their clippers now. But we're buying them and they're gonna keep those high prices because of it😝 Maybe when we stop getting caught up in the hype of owning the newest products these brands will ease up? Just laughing at the barbers who bragged about owning 2 pair. You at least did the rational thing by getting the other blade instead of spending another $200. Look on the bright side... I'm sure you made your money back?

I love Andis clippers, but why do they all have to sound like weed eaters

@petelikes

Жыл бұрын

Lol IKR !?!

Seem like a no imo

So f__king loud

@petelikes

Жыл бұрын

Gotta expect it from these rotary motors if you want that power 😣

Hey good brother what is your IG ?

@petelikes

Жыл бұрын

Had to take a break to revamp the content.

@junebug8808jec

Жыл бұрын

@@petelikes just wanted to give you a heads up you can put a ceramic blade on that and you can put a Wahl still blade also

@petelikes

Жыл бұрын

Oh, ok…. But why would I want to put a Wahl blade on an Andis clipper??? These blade that come on it are perfectly fine. 😉Just sayin.

@junebug8808jec

Жыл бұрын

@@petelikes or you could put any Andis Envy blade or Andis pro alloy blade top and bottom

@petelikes

Жыл бұрын

@@junebug8808jec but why would I want to tamper with the warranty? Again…. Just sayin😉