Anbernic RG556 & RG Cube Starter Setup Guide (Emulators, Roms, Tweaks)
Ойындар
In this video, we're going to setup the Anbernic RG556 & RG Cube with all the emulators, Roms and tweaks that you need.
Buy the Anbernic RG556 here: joeysrh.link/ANB_RG556
Buy the Anbernic RG Cube here: joeysrh.link/ANB_RGCUBE
Buy the 512GB SD card here: joeysrh.link/AMZN_512GBSD
Buy the 1TB SD card here: joeysrh.link/AMZN_1TBSD
Buy the SD card reader here: joeysrh.link/AMZN_SDREADER
ROMs & BIOS: • Retro Game ROMs & BIOS...
Yuzu Guide: • Switch (Yuzu) Emulatio...
Citra Guide: • How to: Citra 3DS Emul...
Remap R Button (RG556): joeysretrohandhelds.com/guide...
Remap R Button (RG Cube): joeysretrohandhelds.com/guide...
Written Guide: joeysretrohandhelds.com/guide...
Written Guide: joeysretrohandhelds.com/guide...
-----------------------------------------------------------
Support Me:
Recommended Handhelds/Accessories/Stores:
Linktree - joeysrh.link/Linktree
Website - joeysrh.link/website
Patreon - joeysrh.link/Patreon
Ko-Fi - joeysrh.link/Kofi
Subscribe - joeysrh.link/YT
Discord - joeysrh.link/Discord
Merch - www.underarmour.com
Music - www.canva.com/p/gravitasign/, www.epidemicsound.com/track/t....
Background - Free Stock Footage by Vecteezy.com
Note: Some of my links may be affiliate links, which could earn me a small commission if you purchase through it, at no extra cost to you.
-----------------------------------------------------------
Timestamps
00:00 - Out of the box preparation
09:18 - Clearing the device and starting from scratch
15:38 - RetroArch
25:19 - M64Plus FZ
30:58 - MelonDS
33:54 - Dolphin
41:13 - PPSSPP
44:46 - NetherSX2
51:16 - Daijisho
Пікірлер: 278
Note: I've updated the title and thumbnail to include the Anbernic RG Cube, since it's the same processor and exactly the same setup steps and everything. So if you're here after and confused why the video only shows the RG556, I just avoided having to create a whole new video for no reason.
@CucumberTonic
2 күн бұрын
Is the nethersx2 install the same? I can't seem to find what being shown in this video
@JoeysRetroHandhelds
2 күн бұрын
@@CucumberTonic Yep, it is. But here's a dedicated Nether video: kzread.info/dash/bejne/inVkw8ZxlcLLfNo.html
@CucumberTonic
2 күн бұрын
@@JoeysRetroHandhelds thanks i finally got it installed! 👍
@scottbellamy8043
Күн бұрын
My hotkey of L3 never registers and kicks me out of RA. Any ideas?
This and the instructions for remapping the R key was clutch for the RG Cube.
You're the man joey. Your set up guides rock. Im not even really grabbing devices anymore but I still watch 😂
thank you for this awesome, encompassing setup tutorial. especially appreciated the simplicity of the 'pull from github' and 'manually patch' process; was an absolute breeze.
Just ordered my 556 and came across this video. OMG! Thankyou. I feel so much more confident doing this now. My first emulator and was worried I might mess it up.
@JoeysRetroHandhelds
2 ай бұрын
Glad I could help!
@CHICKENmcNUGGIESMydude
18 сағат бұрын
this man has been happy gaming ever since
I appreciate how this should have been a quick guide but it was so comprehensive. ❤❤❤ always love your content🎉
@JoeysRetroHandhelds
3 ай бұрын
Glad it was helpful!
Can’t thank you enough for this video, absolutely fantastic. Ordered my RG556 as my first android retro handheld and this video will help so much setting it up 👍
Fantastic video, thanks so much. I got the 556 without an sd card and had a million questions. God bless you for this!
@JoeysRetroHandhelds
2 ай бұрын
Glad it helped!
I wouldn't normally take the time to log on to comment on a video - but this guide was SUPER helpful. Much appreciated!!!
@JoeysRetroHandhelds
11 күн бұрын
Glad it helped!
Great tutorial, you are the only one that provide comprehensive details on how to setup this console.
@JoeysRetroHandhelds
3 ай бұрын
Glad it helped
@craigbfd1
2 ай бұрын
Agreed, I finally got mine after being on the fence and Joey's videos were the deciding factor because he really uncomplicated the setup. It came today and I'll probably start using the included roms until I get my personal sd card ready to go.
@TDuy-0607
2 ай бұрын
@@JoeysRetroHandhelds Hey man, I just got this handheld a few days ago and have some questions. I have a Dolphin emulator installed on my PC with modded games and my settings (controls, graphics mods, etc.), How do I import all of them to the device? I think connecting the rg556 to my PC and copying all the files to it would work but I'm not sure.
Wow this video is excellent, can’t wait til my console comes. I feel prepared now
Amazing tutorial. Perfect set up in 1 hour or less.
@JoeysRetroHandhelds
2 ай бұрын
Glad it helped!
Love my 556, had it for a week and you helped me alot with setting this beast up🔥🔥🔥
@JoeysRetroHandhelds
2 ай бұрын
Great to hear!
@simonagusto5041
Ай бұрын
@@JoeysRetroHandheldsyou recommend to buy it with a as card or withow it ???
Perfect starter guide! Thanks very much. Great channel btw; you have a subscriber!😊
Thanks for the video, I bought this device because of your video ❤
This guide is amazing! Thank you!
Congrats on crossing the 20K milestone 💪 to more success to you. 🍻
@JoeysRetroHandhelds
3 ай бұрын
Thank you! You too!
awesome man, just bought this device and discover your channel, like and sub for sure! thanks for the work!
@JoeysRetroHandhelds
2 ай бұрын
Enjoy!
Great guide, thank you!!
@JoeysRetroHandhelds
2 ай бұрын
Glad it was helpful!
Want ROMs Google is you're best friend.
@AshdonWWE
Ай бұрын
Vimms lair
@ilovemybeard3394
Ай бұрын
Torrent
@null-Oh-6666
19 күн бұрын
Nice try fed
Great tutorial, as usual. One of the things I like about your Android tutorials is that, even if I don't end up buying an RG556, a lot of this stuff will carry over to the Android devices I do own and enjoy. When you were downloading M64 I noticed that your Odin 2 and one of the Retroids are listed as phones. I'd never thought to notice this before, but Anbernic also seems to be using a phone build of Android instead of a tablet build. Why? It's weird when you think about it. Retro handhelds will spend approximately 98.7% of their useful life in landscape mode. Stock "Tablet Android" has a number of quality of life improvements over "Phone Android" for devices that are primarily used in landscape. Older Android phones could be forced into tablet mode by going into Developer Options and setting the DPI to 600. Granted that was back when tablet mode was more or less a glorified flag to tell apps to give you a few more buttons and tabs. I'm not sure what would happen if you tried that with a newer phone or handheld, now that Google has put actual effort into the tablet experience. If it worked it'd be a nice little upgrade for the RG556, or any Android handheld.
Awesome vid. Keep it up
@JoeysRetroHandhelds
3 ай бұрын
Thanks, will do!
Sir, you are a good man!
Thank you for the tutorial of nethersx!
@JoeysRetroHandhelds
3 ай бұрын
My pleasure!
very nice video, just what i needed, thanks so much. Subbed and liked. I ordered a 556 and should come next week. I' new to all of this, but I have just one quick question, how do you get the artwork for the games? Would I need to download special zip files that include the artwork? I have an older anbernic but that one is just as it came, not setupby myself and it only shows text, not as nice with all the artworks. Or are the artworks in the bin? and my old anbernic wasn't just setup correctly?
@JoeysRetroHandhelds
2 ай бұрын
Daijisho scrapes the artwork, so it's all automatic!
Hi Joey Very good detailed guide. Thanks for the efforts. I have one question if you don’t mind. Can I don’t remove the Anbernic’s installed emulators? Will Daijishou detect the original emulators that are installed? I tried and notice GameCube, Wii and PSX games cannot be launched from daijishou.
Un video espectacular
just ordered one. Already have the rg35xx and kinda wish I would've gotten something bigger to begin with but oh well. Regardless. The main reason I got one is for NS games since my Steam Deck can't seem to run ryujinx properly. Being how much better Yuzu works (having already found the apk for it) I'm hoping this little console will play the games that I'm looking at playing. Also really glad I found this video because the stock front end looks horrendous and Daijisho looks a million times better. Thank You.
First of all, thank you very much this is a great guide I'll continue to come back to. I think the game I've picked just doesn't want to run smoothly on this thing, Dragon Quest VIII PS2. I've tried Aether and Nethersx2 old and new versions, underclocking ee settings, hardware presentations, etc. I think it's time I investigate the 3DS version (crossed fingers).
What’s a good charger adapter for the ANBERNIC RG556? I don’t have a pc to charge with it since usb that came with the system box
Thank you so much for the video, I got everything running perfect but Daijisho can't toggle with R1 and L1, but that just minor issue, thank you so much again!
@JoeysRetroHandhelds
15 күн бұрын
Hi, set the controller toggle to both (swipe down, push and hold on the toggle).
Amazing dude thanks a bunch for this and the R36s tutorials! Was wondering if there was a way to set the Anbernic button to open up Daijisho?
@JoeysRetroHandhelds
Ай бұрын
joeysretrohandhelds.com/guides/anbernic-rg556-setup-guide/#Remap_R_button
@mikeyovbrinny
Ай бұрын
@@JoeysRetroHandhelds you’re a fucking legend bro thank you
Im getting one soon but im a little worried uninstalling the emulators. Can i do your set up then when it works ok delete the ptger emulators....or even keep them and do yours as well as preset up?
Question I just bought mine with the 256gb card and I wanna add some games of the ps2. Do you think I can just adde them to the ROMs file? Or most likely wouldn’t run it?
What app do you use for the wallpapers of the console?
Really thanks for this as always Joey. Question: in clearing the device and starting from scratch, following all instructions after, is everything (emulators, daijisho settings, etc.) set on the card itself, and can be transferred (e.g. copied) for a new RG556 device? or does this setup have to be done for every single device because some things are still held on internal storage?
@JoeysRetroHandhelds
27 күн бұрын
It'll have to be done on each device, Android doesn't really do well with copying that way.
@rudya.hernandez7238
21 күн бұрын
@@JoeysRetroHandhelds thank you sir
Great guide ! Thanks. But i have a question : Is it possible to remap the anbernic button ?
@JoeysRetroHandhelds
3 ай бұрын
Yep! joeysretrohandhelds.com/guides/anbernic-rg556-setup-guide/#Remap_R_button
Have you tried playing with a hdmi ? I know 353v struggled with controller mapping in drastic
Broooooo I needed this guide, I usually go for Adin Walls guides cause he goes into the weeds. But this guide is AWESOME is very detailed oriented, specially for a newbie like me hahaha Thanks man, I’ve said it before and I’ll say it again. You f*cking rock 🙌🏽
Hey Joey, thanks for the great guide! As a complete handheld noob, I followed your instructions step by step and got my 556 setup last night and it's running great! Only problem is my Saturn games won't run. Does Beetle Saturn need a bios file or do I just have a bad set of roms?
@JoeysRetroHandhelds
2 ай бұрын
Hey, yep it does! mpr-17933.bin is the filename for the one you need for US/EU games.
@craigbfd1
2 ай бұрын
@@JoeysRetroHandhelds cool, thanks!
Great video your very helpful 2 things my gc/ wii roms wouldnt read on dolphin and the xdelta and apk files for nether wont dl or update just says error
great vid joey - if you had to choose one would you pick the rp4 or this anbernic - can you give a few reasons why - thanks
@JoeysRetroHandhelds
3 ай бұрын
I don't like the RP4, so this. I'll share more in my review at some point later this week.
@silverbackhc
3 ай бұрын
@@JoeysRetroHandhelds thanks joey - when you do your review can you say why you dislike the rp4 - it seems like everyone is favouring the rp4 - thanks
@JoeysRetroHandhelds
3 ай бұрын
No secret, it's not comfortable and not a fan of the control layout or the screen. Pretty simple!
Hi, Rg Launcher has 27 preloaded emulators, is it possible to add more or are you forced to put Daijisho to solve the problem? I would like to be able to use the official launcher by adding other emulators, thanks
can both setups run simultaneously?? also can your setup be rolled back in case I don't like it?
Hi! Thank you for your video! I have a question, if I go to setting and click factory reset, the RG556 will be reset at the first time when we open it from the manufacture?
@JoeysRetroHandhelds
2 ай бұрын
Yep.
Hey! Is there something you would add to te tutorial after few weeks? Maybe smth you would do diffrent, or additional setup? Would love to hear more tips and tweaks.
@JoeysRetroHandhelds
2 ай бұрын
Nope! But check the written guide in the description for some added items.
I'm not sure if I missed something somewhere, I feel like I've re-watched this quite a few times now. I'm having a problem where L3 is pressed alone or when pressed in combination it minimizes what ever app that is open but in Dijisho L3 attempts to select what ever is on screen / selected but all in all killer video would like advice if possible though ^_^ thanks for helpful video
Hello joey, one quick question: do I have to format the SD card to fat32 like you do with the MM+? Thanks man, amazing video!
@JoeysRetroHandhelds
10 күн бұрын
Hey, it's exfat and I show it at the start of the video how to.
@mojoman1175
10 күн бұрын
@@JoeysRetroHandhelds yeap, I totally missed that part. Thanks man!
Hi Joey Thank you for these great videos. I have been into handhelds for a few years but never customized any. Always used the stock as card. I am having an issue with some roms being recognized. Should I just start all over. I was using Roms from a stock card and downloads from cartridges. Would appreciate your response if you have time. Ty
@JoeysRetroHandhelds
2 ай бұрын
Hey! It all depends what you mean by recognized, in Daijisho? Or another frontend? If it's easier, can troubleshoot in the Discord in my description!
Hi i just ordered my own rg556. Thx for the starter guide.im not Sure if i reinstall All emulator. Some will be relaxed for Sure.one question: if i replace a emulator egal ppsspp will the home frontend still be usable? Is there a possibility to change emulator into home frontend? Thx
Great tutorial, i just ordered mine and was wondering can i do this with the sd card they give me? i dont want to waste all the roms it comes with and i want the front end and the emulators you downloaded.
@devantejohnson1941
16 күн бұрын
Did you find out if this can be done with the original SD card or did it not work?
Thank you for the guide ! For inserting the sd card, please help ! I had all my roms on a Sandisk 512 microSDXC card, when I put it inside so the logo/text was facing me, I put it until the end, no forcing, but it kept coming out, no clicking sound to stay in place. So I just maintained it by closing the lid. The device then tried to read the card, failed then asked me to format it. It seems I lost all my roms. My question: did I do a mistake while inserting the card ? I believe I followed the instructions. If I made a mistake, how should I insert it ? Thank you.
@MorbidlyMortuus
2 ай бұрын
I’m having same problem as you
thanks
Is it possible to download the roms using the device with the wifi onto sd card that's already inserted. So without using a computer. I have an ipad tho if that doesn't work. I would just need a flash drive if I was going to use that?
@JoeysRetroHandhelds
3 ай бұрын
Yep, you can.
hi, how i can put all the image for all the rom?...there is a "scraper" for restroarch??...thank's
Why failed to retrieve core list after i .. click core update on .. swan station.. help me
How do I add games to the internal storage , and how do I scan internal storage?
I’m having trouble getting ps1, ps2 and GameCube to work. The roms, iso, bio file won’t open. I’ve tried getting them from different sources. I have no problem with n64 and lower . The GameCube games show up on the front end but won’t play. The ps1 and 2 don’t show up on the front end. What am I doing wrong?
I'm sure this would have took days without this tutorial
Thank you so much for the guide. I bit the bullet and uninstalled everything after messing around with the RG556 when it arrived. I feel better. I wanted to ask this question, but at the same time not because its kind of down to me to push a bit harder on. Would you be interested in doing a deeper guide on the RG556 with other systems? I own a Miyoo Mini and its as simple as making a folder for corresponding systems and dropping roms. I would love this handheld to be set up ultimately like my replacement / equal to Miyoo. With the RG556 I'm a bit of a novice to Retro Arch and setting it up correctly. I took your list of cores from your website, but I haven't really went further with it, setting Daijisho up, or folders for systems. Again its really down to me working out the quirks with Daijisho but maybe this is something you feel could be a good educational video?
@JoeysRetroHandhelds
2 ай бұрын
Apologies, may not understand the question, but for other systems I've done deep dives on most of them throughout my channel and a deep dive on Daijisho. You'll never be able to get the full OnionOS MM+ ease of use experience on Android, but once it's all setup, it's close.
Is this good to do for this RG556 being my first system?
Hi Joey. Want to ask, did you managed to connect to a monitor or portable monitor?
@JoeysRetroHandhelds
2 ай бұрын
Yep, can't get charging and display out at the same time though.
@craigbfd1
2 ай бұрын
Great question, my hope is to be able to use my LG big screen in my game room.
My ps2 Roms are reading as zips in the directory for some reason but they show up as regular roms on my sd card and the internal. Please help
I just got mine how do I remove the control panel thing when you play a game I don’t like it there?
how does one add box art for the stock front end?
I have a problem with the sd card because I can’t insert it I don’t know why? Please answer me
my pix emulator keeps crashing even after selecting the retroarc swan station 64 one.....I already tried every single other option and nothing works :( any advice?
Will OdinTools or AmbiOdin apps work for the RG556?
Great tutorial. Unfortunately on my end Nethersx2 won't install. It just says "something went wrong. App not installed"
Thank you, how can I switch the big buttons' light off?
hoping you can help me. I am trying to install a Virtua NBA rom on my Anbernic 556. I am having some difficulty. I have downloaded the rom, but whenever I try to move it to the Naomi folder it gives me an issue.
Xbox mode confusingly needed of course for GC games like Sunshine for analogue trigger use.
@JoeysRetroHandhelds
3 ай бұрын
Hm, not my experience. Works just fine using Ns mode. (you can use analog triggers in Ns mode)
How You Connect This Device To The TV What Cable I Should Use
I’m still a little confused on 2 things. Does deleting all those emulator apps from the android interface and adding that Daijisho front end mess with the menu when you press the “R button” on the bottom left of the console?
@JoeysRetroHandhelds
2 ай бұрын
Daijisho is a frontend meant to replace the Anbernic frontend you see when pressing R. Essentially, you'll never use the Anbernic frontend again. You can also remap the R to Daijisho, I have instructions in the written guide.
@jbab96
2 ай бұрын
Gotcha. Thank you very much!
Do you have to have a Windows PC or will a Mac work too?
Default Home App keeps resetting when starting up Daijisho wont stay as the default, any ideas what the issue could be. Also Daijisho doesnt launch games from Citra mmj unless I click on the citra standalone app first then works fine
@RetroDaddyPH
2 ай бұрын
You have to set daijisho as the default launcher in the android settings
@Fedz84x
2 ай бұрын
@@RetroDaddyPH That is what I did but no matter what it will default back to the original for whatever reasons cant get daijisho to stay as default
Is it better to keep the original OS or go with Batocera or EmuELEC with the RG556? Mine is on its way
@JoeysRetroHandhelds
14 күн бұрын
There is no CFW for the 556.
this video is great, however how do you add rooms to a new SIM card? I see you only are explaining this to people who have a preloaded sim.. I have a new sim that's completely blank and no ides how to download rooms onto it and what folders to use to put it on the 556.. please hep!
@JoeysRetroHandhelds
23 күн бұрын
I explained exactly that in the beginning.
Does the default Odin 2 SD card work fine or should I replace it with another one?
@JoeysRetroHandhelds
3 ай бұрын
Hey, not sure what you mean by default Odin 2 sd card, as the Odin 2 doesn't come with one, but if it's working in the Odin 2, it'll work in the 556, yep.
@KarmaisReal-sm6bz
3 ай бұрын
@@JoeysRetroHandhelds Sorry I forgot it doesn't come with one by default. My bad.
if I do something really wrong and then do a factory reset. Will the device return to its original state with the emulators that are already pre-installed and with all factory settings?
@JoeysRetroHandhelds
Ай бұрын
Yes.
A couple questions if you don't mind. First, L2 and R2 don't navigate in daijisho but they seem to work fine anywhere else. Is there a setting I can check in daijisho for that? Also, I'm setting daijisho as my home app but it doesn't seem to save the setting. As soon as I select it, Daijisho opens but then pressing the home button twice takes me to the stock Android Anbernic home. Any suggestions for that?
@JoeysRetroHandhelds
Ай бұрын
The first is by setting triggers to both using the quick toggle, the second is by not pushing the Anbernic home button, or remapping it. joeysretrohandhelds.com/guides/anbernic-rg556-setup-guide/#Remap_R_button
@PARANOlDDROlD
Ай бұрын
@@JoeysRetroHandhelds thanks! Is the quick toggle a Daijisho setting for the triggers?
@JoeysRetroHandhelds
Ай бұрын
It's at the 13 minute timestamp, push and hold on that toggle.
Please Help. The function button (the R on the bottom left) is not working for me. It doesn’t do anything and my friends RG556 does allow to quick swap front end. is very frustrating! How do i map this button to function as shown at 7:24?? Please help
thanks for the tutorial, I followed the steps but I have a strange problem, I uninstalled all the apps, I try to reinstall them from the playstore but it gives me the installation error on many apps, if instead I try externally from an apk it tells me update app but the factory app is already uninstalled and won't let me update. Do you know what the problem is please
@mattdavis9601
3 ай бұрын
I don't know what the problem is. If you have all of your games and stuff on an SD card then my advice would be to pop it out first and then factory reset the unit. If you put all your games on the internal storage then you'll lose them when you do the reset. It's probably worth doing anyways because from your comment it sounds like you can't actually use your RG556 at the moment.
What happens when we can’t get some of our roms to play what can we do? Also can you show us how to delete the roms out of the whole device all together so there isn’t so much duplicates so we can re download and try setting up the roms again
@joeh3445
2 ай бұрын
You would go into the Files app and access the folders there. From there you can select a folder and rename, copy, move, delete using the menu.
Can you copy and paste the ROMs that it came with to the SD you want to use?
@Jacob1451_Kapnobatai
2 ай бұрын
Should be able to
Possible to change that moving background to something less annoying (and probably battery-draining)?
@JoeysRetroHandhelds
Ай бұрын
Yep, it's just Android, change the wallpaper.
Hi, quick question, what's the best way to play on a big screen tv? USB C to HDMI cable? Or can I mirror the screen?? I'm sitting about six feet away
@JoeysRetroHandhelds
2 ай бұрын
Mirroring would add latency, so yeah definitely USB to HDMI!
@craigbfd1
2 ай бұрын
@@JoeysRetroHandhelds Cool, thanks!! I figured latency would be an issue as well, can I pair a Bluetooth controller to the 556 so I can play without a cable running across the room?
@JoeysRetroHandhelds
2 ай бұрын
@@craigbfd1 Yep, you can!
@craigbfd1
2 ай бұрын
@@JoeysRetroHandhelds Thanks👍
When I load up the section with the pre loaded games it reads 0 games. Would this be an SD card malfunction? I’m using the SD cars that comes stock with the device.
@JoeysRetroHandhelds
2 ай бұрын
If you don't see roms in those folders and the pathing is correct in the Anbernic frontend, it's possible.
@andrewmendoza2704
2 ай бұрын
@@JoeysRetroHandhelds looking at the stock SD card is seems to be cracked. So I’m gonna assume that’s my problem.
Is it possible to reconfigure the R-Button, which is intended to open the Anbernic Front End, to instead open Daijisho?
@JoeysRetroHandhelds
3 күн бұрын
Yep, check description.
@ndMaikel
3 күн бұрын
@@JoeysRetroHandhelds Thank you for your frequent responses, Joey. Your content is invaluable for retro handheld newbies. Appreciate your effort. Cheers!
No games pop up with the SD card that came with
Is there any harm if I keep the M64Plus FZ Pro that Anbernic already installed to avoid paying for it to be installed again?
@JoeysRetroHandhelds
14 күн бұрын
It's out of date and will never update.
How much performance are we losing by using RA for everything instead of standalone emulators? I would assume for stuff like N64 and lower it really shouldn't matter because the HW is powerful enough. I'm really not a fan of having different hotkeys for different systems.
@JoeysRetroHandhelds
20 күн бұрын
Gaining, the standalone one's have a ton of issues.
Failed to reterive core list
1 hour? my man turning into Ross over time 😅😅😅
@JoeysRetroHandhelds
3 ай бұрын
I'm Joey.
One question, cod mobile dosent recognise buttons? Any solutions? Thanks
@JoeysRetroHandhelds
2 ай бұрын
Did you try Xbox button mode?
How do I delete games on the 556?
I bought this yesterday with the 256gb SD card. Can I buy a SanDisk one and just copy everything over after formatting the new SD Card? I was unaware that the one I purchased would be poor quality.
@JoeysRetroHandhelds
2 ай бұрын
Yep, format as exfat, copy all over. Just be aware the roms are junk and you'll want to replace them.
@user-jx7gb2mq9u
2 ай бұрын
@@JoeysRetroHandhelds Okay. Thanks for the quick reply! Is there another SD card that has the OS installed on it? Do I need to copy everything from that SD Card over to another new SD card as well?
@JoeysRetroHandhelds
2 ай бұрын
Nope, OS is on the internal storage. The SD card only has whatever you add to it, so usually roms.
@user-jx7gb2mq9u
2 ай бұрын
Nice! So I didn't completely screw up! I just need to buy a better quality memory card. Thanks for all of your help. I'm super excited to play this thing. I am almost 37 years old and I have a lot of experience with Emulators. I can't wait to play consoles and games that I never got to on an AMOLED. Sounds amazing.
Where to get GameCube roms ?
Do i really need n64+ to play all the games?
How can I turn off the joystick lights
@JoeysRetroHandhelds
2 ай бұрын
I show it in the video, near the beginning.