That mr harvey has been a massive inspiration he's one of them people that when he is teaching it's time to to listen watch and that 372xp and your smile is the reason why. Thanks tinman you guys put some of the best entertainment on the net. Be well mate

Harvey is a true guru. So knowledgeable and crafty. Genius !!! Way to go Harvey ! I would be proud to run that beast. ❤

Two legends I’ll take the O44

What a cool deal. You’re a very fortunate man, and it’s very apparent you truly appreciate it. Good luck!

Tremendous saw from the iron horse, thank you Harvey

Great stuff, thanks Tinman.

Two awesome saws right there.

Cheers man .

Love your stuff work on these saws every day big love from Bristol England

Wow, what a gift✊

Love watching you and Harv. love the content.

Wow that’s a Beauty!

Two awesome guys and channels right here❤

THEY DONT MAKE TO MANY PEOPLE LIKE IRONHORSE TRUE TO HIS WORD,,,,YOUR A GOODMAN HARVEY,,,TINMANS A PROUD OWNER OF AN IRONHORSE SAW SHE SOUNDS AWESOME NASTY,,,,THAT 044 WILL RUN LIKE A CHAMP STAY SAFE TINMAN

You and Harvey are both a blessing to the tree world. Thanks

Excited to see that 044 repair.

Dolmar saws are beasts !

Congratulations on the ironhorse saw

That 372 sounds wicked. Enjoy it. Harvey is a great builder.

I just bought a very clean MS440 magnum w 25” bar and chain. It doesn’t even have scratches on the bottom from starting on the ground no cracks chips or missing pieces! I prefer the older Stihls and Husqvarna over the new models but I have some new ones too! 😎

Very cool saws. Cool stories. Nothing beats good friends. Thanks for sharing.👍🍻🇨🇦

Very nice saw. Hope to see your 044 running again too.

Thats awesome tinman!! Ironhorse builds some sweeet saws its going to be fun watching this series to see what you can do with a 372's brother!!

I need these kind of friends, my grandpa has a stihl 044 and man that thing keeps up with all the newer ones out there with zero issues

The praise and thanks you extended to Harvey speaks volumes about your character 🙌

Harvey, I think you choked up The Tinman a wee bit. Thank you Harvey!

Great video as usual, and great saws! I love the 044's and I wish we had Arctic models in "the States",it would really come in handy in our Montana winters!

I saw Harvey's last video of that saw so knew it was coming but just WOW!! I'm at a loss for words! Absolutely incredible! Always been a husky guy myself, tho I love all brands lol. The last few months I've been getting more into stihl. Surprisingly don't see too too many in my area. I'd love to see you go through your 044!

Awesome! Harvey builds an amazing saw!! Id love to be able to get one of his 372s or an 066. What an honor to own that saw. STAY SAFE!!

You look quite smitten with your new toy!🇨🇦🇨🇦

that Kidd on Christmas smile so good love it she's rowdy ❤👍🌳😜

Harvey is a good guy ! Helped me on 285 info. As you have help me especially on chipping for spark on the old huskies

Tinman - when the saw came on - the smile on your face told to whole story about how you feel about your relationship with the IronHorse. I love the Harv man...he is a treasure and truly appreciated you guys being to kind with sharing your blessings with all of us.

Gtta love a 372

That’s pretty special, i dream of having 2 saws, iron horse 372 and a tinman 266.. maybe some day..

i have to get my 372 xp running it is my spare and actually for bigger wood my go to.. pretty sure the coil is gone...really like the sounds of that ironhorse 372...right now i am running a 572 and i absolutely love it. Keep it clean and sharp and have never had it to the shop yet. Smooth, one word for them Smooth. Have a great weekend everyone.

cold start on any old stihl i have is 6 pulls figured that was normal , don't know, super sweet husky

Super cool of Harvey to send you that 372, his passion for building power saws is inspiring. Definitely a good idea to replace the seals and pressure test the 044. I have an Arctic 046 that had the same problem, I rebuilt the carb, then swapped the carb, still ran rich. I had put a Farmertec tank handle on it as well, and it ended up the tank vent was bad. I put an OEM vent in it and that fixed it, something to keep in mind. Hard choice between the Stihl 044 and the 372xp, enjoy.

@tinmanssaws

Жыл бұрын

Thabks for the info, maybe that's my issue

@230e4

Жыл бұрын

@@tinmanssaws another thing to check is that the case gasket is not leaking between the oil tank and crankcase. I have seen that happen on this era of Stihls given their age. The saw will get bar oil in the crankcase making it appear as running rich, slight at first, then smokey at first start, saw gets harder to start then over time real bad as the gasket leaks more. It is a good practice to remove the fill cap with the saw on it's side when pressure testing to check for a leak into the oil tank. I have fixed a few over the years that only needed a new case gasket. A dealer friend just did a warranty fix on a 592xp with a case gasket failure under the muffler were the oil tank and crankcase meet, so it stands to keep this in mind as part of a diagnostic with most saws.

I watch your channel on and off for repair and rebuild tips - love it, great content. I have an earlier 044 I picked up on kijiji that was pretty beat up. I replaced a bunch of things (fuel lines, vent lines, carb boot, etc) and generally cleaned it up. The top-end looks clean. However, it runs super rich like you're describing on your 044. No matter how I set the idle or the hi/lo, it runs way too rich. I'm curious to see if the carb replacement will improve things on yours. As a test for richness, you might want try it with just the carb swap (before you replace any seals) to see if that improves the richness needed to run well. Anyway, looking forward to seeing what you make of the richness issues on your 044. Keep up the good saw repair content.

Hi tinman been offline for a bit. Glad to be back. A have missed so much. But I have plenty of content to catch up on. Lol. A jst got a homelite xl12 am hoping to port it not easy to get in Scotland but a got hur buddy.

Wow, super jealous. I would give my right arm for a Ironhorse saw, but then I couldn’t use it. I’m sure it’s in good hands.

@tinmanssaws

Жыл бұрын

That's funny!!

Hey Tinman checkout the air filter on 044. I had really choked air filter on Husqvarna 543xpg. It would idle good but run pig rich on high end and would not get to normal high rpms whatever i did to carburetor. Even that i washed the air filter few times in warm soapy water it would not help any.

I'm pretty much a die hard husky guy as well but a guys gtta give a nod to your 044.

👍💯

I hope my 371xpg runs that nice when I'm done with it, or at least close to that...😊. Pretty sure it won't but here's hop'en...😂. Nice gifts from nice folk. On behalf of the Tinman and channel content for us, thanks guys and gals. TC Mahalo Tinman 🤙🤙🤙

Tinman!! Hey buddy nice saw u got there off Harv… we had our sawfeast Saturday just past letting u know my 08S won the first round of the upto 60cc class, second in the 038M shootout I used ur numbers and let my mrs grind on the cylinder also had a head to head solo Rex race I won that and we had a maple leaf challenge = canadien built saws= pm canadien 270’s I used my pioneer 650 and I won that too😉 I’ll have some footage up on my channel soon❤️✊

Great looking saws ! Thanks for sharing. That Iron Horse saw is an animal. Here's a thought regarding your 044 running rich. Check your timing. I had the woodruff key shear on my 266 and it all the sudden was running pig rich. Not sure how or why. Anyway just thought I'd offer that as a possibility. Thanks again for all you share!!

@tinmanssaws

Жыл бұрын

Hey buddy I think I pulled the flywheel last year but it's worth another look see. Hope your 288 build goes well, I'm really happy with the one I just built.

Nice vid and nice saw! I sent you an email a week ago , you must be like me , you have too much projects and not enough free time lol

I been wantn a 044 for a while now

@russellhelms2835

8 ай бұрын

Just get one…you’ll never regret it. Bought mine brand new for $749 in 1995. 28+ years now, bone stock still…and it NEVER disappoints! Just cut a huge Oak last weekend (10-23-2023), just a gem to cut with. It’s never failed me once💪😎

Just rebuilt a 088 monters

I LOVE my STHIL saws! BUt I’m a STIHL guy SO!🤔

@russellhelms2835

8 ай бұрын

Hey, me too. Be proud😄been lots & lots of timber sawed with Stihl.

Yup. I think that would be a great video. 4 of your best 70cc saws run hard and give a concise winner 🥇. Also, why are you a Husky guy if your favourite saw is a 044? I always thought that was funny. Cheers!

Hi everybody hope everyone is having a blessed day

how mutch is the 2186 jonsered makes ? worth buying foe 400 euros? great video btw

I need help with my dads stihl ms 211. The exhaust muffler b0lts keep c0ming 0ut even if y0u tighten em super tight.

Pressure/vac test your carb there tinman. I suspect your getting some unmetered fuel somehow 🤔

HI TINMAN have ran or ported a husky 394 chainsaw 95cc stock they pull and cut good from what I seen let me know thank U 😊 OMG 4 21 2O23

Once you’ve had a Husqvarna you’ll never go back 👍🇨🇦

I still feel like my 460 rancher is t0 small 60cc chainsaw.

Hey Tinman - I was thinking of selling a few of my Stihl saws (026, 260, 441cm) and picking up a brand spankin' new MS462. However... lately i've been thinking that the 372xp might be a perfect long term "big" saw for firewood. I have a pile of 28" techlite husky bars so only helps the situation. If you had to pick on 70cc class saw, would an Ironhorse 372xp be it? Cheers!

@tinmanssaws

Жыл бұрын

Hey Dave, fpr me a 372 is the best chassis, light weight, good power and very nice antivibe. They are hard to beat.

@DavesSmallEngines

Жыл бұрын

@@tinmanssaws Well that begs the question - is the MS462 auto tune carb to avoid making adjustments a saw that would "beat" the 372xp? Thanks!

monday tuesday thursday wednesday... leave the gun, take the cannoli thanks for all of the words of wisdom godfather 😁

Put your 572xp in that mix, please.

@tinmanssaws

Жыл бұрын

Will do

Is that a husky L77 on the top right of the shelf? If so, I just picked one up and their absolute rippers

@tinmanssaws

Жыл бұрын

Yep thats a 77

@ryanharris1756

Жыл бұрын

@Tinman's saws make a video on that thing, you don't really see much on them

Harvey

At least half of the Stihls I work on I end up replacing the carbs. Not sure if the owners are abusing them that bad or what

@russellhelms2835

8 ай бұрын

Yep they are…I’ve had my Stihl 044 since brand new in 1995 & always ran Premium fuel/Stihl mix through it. Just cut aip a huge Oak last weekend & it’s all original (except 1 bar & chains)…still starts flawless & runs like a banshee ALWAYS! Still have all the original manual, paperwork, and the receipt😂$749 brand new (then). Love it!

Sssoooo,whats up with the stihl 044?

Hey Timan, Love the channel Mate, i'm a home owner, beginner in the chain saw cutting, I bought a cheap Chinese saw and would like to upgrade to a Husky 455 or 460 Rancher, Are these good saws and which one would you recommend? Thank you.

@tinmanssaws

Жыл бұрын

I have a 2 455s here. They are ok but a bit heavy and down on power. I'd skip the farm and ranch saws and go for a pro saw.

@Ketis1985

Жыл бұрын

Get the 460 rancher if you need a bigger than small homeowner saw and dont want to spend money on a pro saw.

@richiemallette8751

Жыл бұрын

@@Ketis1985 Hey, Thank you for Your comment, Yes, I bought the 460, 700 beans new, I love it, It does what it suppose to do, Cuts. Much Appreciated me friend.

Does anyone know where to get a new crankshaft for an 044?

@dennisconstantine624

Жыл бұрын

Wolf Creek saw shop sell hyway 044 cranks for $72-73.

@KT-et5vn

Жыл бұрын

@@dennisconstantine624 cheers mate appreciate your help 👍

The tinman with some iron now that's 👍