So helpful, a slightly slower speed would be easier to follow. Thanks!

@freetime2freeminds

6 ай бұрын

I know. So annoying

@MyhMyh-ip6lw

5 ай бұрын

Hi there You may go on settings top left corner : the 3 points ( dots) or the round with teeth (don't know how to say in English) From there go to playback speed and choose either 0,75x either 0.50x or in other cases if you need quicker speeds.1. 25...till 2x speed Maybe I wasn't very clear to say it bu ttry it. Wish you all the best!

@UKsystems

5 ай бұрын

@@freetime2freemindsthat’s why KZread has short and long form

@PhotographyWithElio

4 ай бұрын

😂😂😂 mama kill me please 😅 as if its that easy. Here how to install rail just make a proper video

Perfect 👌🏻 thank you for this. Edit: the advice worked first time. Fantastic video.

Seriously...So simple and awesome all at the same time. Well done.

That only works of you have a cross beam in the back of the carcass to rest the work on.

@shannonp4037

5 ай бұрын

There are clip on drawer guides for situations without back ledges.

Cheer~~~a cupboard with shelves or drawers for storing or displaying articles. 😊

Wish I would have thought of this when building my nightstand bro them drawer slides were literally a nightmare

@joshlayonworks

3 ай бұрын

Were you good with measurements??? Because if that's not done well U can hate fitting slides😂😂😂

@IsaiahMayhew

3 ай бұрын

@@joshlayonworks I’m good with measurements it was just my first time ever fitting slides so it was very difficult cause I just had to wing it

@joshlayonworks

3 ай бұрын

@@IsaiahMayhew my first encounter all slide rail parts fell apart🤣🤣🤣but now I fit them with ease

Do you have a step by step tutorial?

Now show how you order a drawer to the exact size you need for your cabinet.

@shaziman1

5 ай бұрын

Please, was about to ask the same. Can see the pocket screws, but want to see how YOU do the base part, rather than just screw it on to the sides. Thanks

@bartholomewgreatpants3425

4 ай бұрын

There's only a bazillion videos on KZread showing exactly how to make framed cabinets with inset and overlay droor fronts. If you have a tool to cut a straight line, you can make cabinets and droors. If you can make a box that's actually square, you're well over halfway there.

@caryk3962

3 ай бұрын

You don’t order drawers you make them.

@DforDela

2 ай бұрын

@@shaziman1there’s a video by fix this build that where he builds a dresser and talks a lot about his drawer building. Think he has a full video on drawer building too. It’s fairly simple.

Thanks for the video. It’s really good.

Good job!👍👀😊

Thank you, thank you, ,thank you 🙏

Thank you there ❤

Brilliant. Thanks. 🎉❤

good job!! thanks!!

فوق العاده بود❤

Raxmat opoqi zoʻr tushuntirib berganiz uchun 😆👌

Amazing 👍

Fantastic very nice work ❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉🎉🎉😊😊😊😊😊

Use a spacer for both the case and the drawer box that are offset by a 1/4” . It’s quicker and more accurate

Nice!

Nice help dear ❤❤❤

Espectacular la técnica.

Wow super

You re good, master

Why do you setback the drawer members by 3/16th of an inch?

Amazing

Easier way to test spacers is to get a man to double check the work.

How do you do the next one down without the stretcher?

@CaptnRich737

2 ай бұрын

Krieg makes a tool for that ..or.. You can start at the bottom and work your way up using the previous drawer as a stretcher.

Good idea.

I always installed it same way. Efficient and faster.

How thick is the bottom spacer

Very good❤

Whats that tool you used to measure the inset portion.

@pineandpoplardiy

Жыл бұрын

Hi! It's the Kreg multi-mark tool. We use it all the time! amzn.to/44mPgR7

What kind of screws did you use

Why are the pocket holes on the front of the cabinet?

Perfect 🎉

Is there any vertical channels available in the market?

Wise idea

Easy to install,but clearance for channel,and its fixing height is important,means proper measurement.should explain here.

Awesome

What about measurements of drawers??

Smart ❤

Sweet 'n nice

Am a carpenter in ugand east africa but i can admit slides r sometimes a nightmare gor me😂😂😂some times the bare rings fall off completely

Fitting the slides is not the difficult bit .it’s sizing the drawe4s to be exactly the right size

@mauricecohen3830

4 ай бұрын

True, the key to smooth sliding drawers is to make square cabinets and drawer boxes.

3/16” of an inch? How thick is your drawer front?

Thanks

Nice

Not a fan of side mount slides. You already have rails on the cabinet lol you could easily just buy better bottom mount slides and you wouldn't have to do anything but control the depth of the slide. Although for using this specific type of hardware I like what you did, good job considering

@loganhentko2152

9 ай бұрын

I forgot to mention, the method I presented also hides the slides underneath the drawer rather than showing it on the side, like the sidemounts do. Anyway good video for teaching people sidemount installation!

@mauricecohen3830

4 ай бұрын

True but decent bottom mount slides are a lot more expensive. Blumm's can cost you $75 or more per drawer.

why does the slide need to be set back 3/16?? does it not go flush to the edge? have i been doing it wrong this whole time...😒😒

@pineandpoplardiy

6 ай бұрын

That's just what all the drawer slides that we've installed say 🤷‍♀

@winterborn82

6 ай бұрын

You can manipulate it though. When we still used side mounts, we move them forward on overlay to avoid using bumpers, and backwards if using inset.

@deanowright359

4 ай бұрын

It truly depends on how you where you want your drawer to stop when its fully closed as well as the thickness of the wood you are using for your drawer face. you can adjust as needed based on the design of your enclosure, face frame or no face frame?

Who ever likes his comment is a great person and will be followed with 7 years of good luck ! If follow 20 !

Wow she's better than diaz construction

As long as you have a rail at the back of your cabinet, then it works great, but who put your real at the back of their cabinet?

Hebat

We? Are you the Queen?😂

got it

You only get one shot do not miss your chance to blow. -Eminem

It was already easy. Just measure, level, and pay attention.

I am in Ghana work

Better way, plan before , know measurements , mark lines using square because it is more important that runners / drawer slides are perpendicular to the front and less important is is parallel to bottom.

@benjamintaylor7540

3 ай бұрын

And the ear defenders aren’t necessary to use a screw gun.

@G.I.D.CustomWoodworks

3 ай бұрын

What?

what if you didnt have a face frame

The vocal fry Makes my head hurt

Классно! Скажите пожалуйста, а какие размеры вы использовали подкладок?

@romanhrytsyk2796

5 ай бұрын

Хев инч, это 12 мм

@romanhrytsyk2796

5 ай бұрын

Обратите внимание на саморезы в корпусе. Это Pocket screws

@OriettaWei

Ай бұрын

hey,sir

Anyone ever hear of a tape measure 😂

I disagree with this work! It is horrible. Unless you do my bathroom drawer, it is ugly. Agree? if so then this is the MOST EFFICIENT, BEST VIDEO I HAVE EVER SEEN. I will text you my Maling address to ship my drawer. Seriously? great work

@pegasus3862

10 ай бұрын

Sorry just trying to get familiar with installing drawer slides, this is horrible cause it’s weaker being at the bottom? I’m gonna be installing them soon just wondering

@amigos4erin

10 ай бұрын

@@pegasus3862that person was joking. They said it’s terrible…. Unless the person comes and installs a drawer at their house. So, just a joke. I don’t know whether the technique is good or not (I’ve never installed a drawer), but it looks good in the video.

@pegasus3862

9 ай бұрын

@@amigos4erinthat’s what I thought lol Thanks for the response!!

Bence bir mobilya ahşap ise metal karıştırılmamalı.

If your drawers are tight buy a bigger size?😂

Annnd SUBSCRIBED

Video is too fast to process

Just curious, who is we? You keep saying we.

All you DIY-ers. Do not do this!! There are more things wrong than right with this process. I can not even begin to explain all of the problems with this and upcoming issues.

I think you've done an excellent job don't listen to the negative nonsense ❤

Duck voice 😂

Those guides suck. No forgiveness or adjustments. Better to use undermount guides. Full extensions.

Was gonna subscribe, but all shorts? Surely you have the content to fill a few minutes

Why?

What happened to your voice?

Too fast..

Have you ever listened to your own exaggerated voice? so learned, so counterfeit.

Pretty obvious , nothing new here

Show

This technique its not always suitable

May be worth talking through your mouth rather than your nose. Good info though.

Your great👍❤️

Nice...

درح

3 sixtheen of an inch.. people, get the freaking metric. I do beleive it will make your life a hell of a lot easier

@jjballestrini

4 ай бұрын

No

Jesus is the answer. Whoever is reading this you may feel lost in life; you may feel like giving up, wishing it would all end. You want peace, but can’t find it. You’ve looked for it in women, drugs, alcohol, porn, money, and so much more, but you feel emptier the more you do it. The only one who can fill us is Jesus Christ, the living God; the one who came into this world as a man and died on the cross to save us from our sins (our wrongdoings against God). If you trust in Christ as your Lord and Savior you will be saved and you will go to Heaven when you die. One thing many people think once they come to God is everything will be perfect. The truth is it won’t be. Once you give your life to Christ the devil will attack you over and over again until you break, but Christ is there to strengthen you and to get you through all things. Give your life to Christ my friends. Without him, life means nothing.

awesome method and a real time-saver! But dove-tail joints would have been sooo much nicer and so much more stable compared to pocket holes...

FWIW, I'd prefer your natural voice vs. the growl/ croak/ groan of vocal fry. No need for affectations; just speak in your natural voice.

Could you have slowed down just a touch for a beginner to see & understand it better?

Here’s an easy way to help people! TALK SLOWERRRR

Step 1, get plywood