Oh man ... now we need to see a similar setup on the Zhiyun Crane ... !

Cool set up and great presentation. Setting up the C70 and Ronin RS2 myself, but from past gimbal experience I’ve opted for spring arms to smooth Z-axis. Two handed is the way to go. I’ve had issues with screws loosening on gear too! I hate to over-tighten. I have found that larger gimbals are constrained in tight spaces vs stuff like phone gimbals.

Honestly, I'll wait for the Tilta Ring. Hopefully they start shipping soon.

Thank you for all the good information on this. Have you used this with the remote control handle as well? I've been debating between this setup and the OEM one from Ronan, but I like how this has the remote battery mounting options

Thanks for showing us the Tilta handles properly and “screwed up” situations. What about using the Zhiyun Transmount quick release between the gimbal and its tripod?

Thanks for the video, Brandon. Did you find out from Tilta, in the end, if the arm/screw you have was faulty?

I purchased the DJI dual twist grip handle. Love this video

I didn’t know about holding the trigger and flipping the gimbal for low-mode. Awesome! Thank you! Great video!

Brandon! You just make my day with that move 5:27. I'm using my Ronin M 5,5yr's and I need to switch. Now I can imagine fitting my ninja V on it. And that nato rail on tilta! Thanks for your time for that review.

It would be great to see a combination of this system with something like the Tilta Rear Handle with the joystick control or the DJI Ronin Tethered Control Handle. Dual handles with joystick control for my right hand would be great. Too bad DJI wants $350 for the Tethered Control Handle. Thanks, Brandon.

You are so awesome! You just answered & solved so many questions/issues for me in one video! God bless you my brother!!!

Excellent video thanks for sharing. Was wondering about a v mount setup and when you touched on that it made me definitely decide to try to get this.

Oh snap,,, this is Exactly what I'm looking for.. Brandon Stay Dropping Bangers 💯.. #dope

@bwashmedia

3 жыл бұрын

Thank bro

thank you for also covering inverted and the Ronin M, much love

How's the C70 on the RS2?? I'm really curious. Great video btw!

Hey Brandon, Thanks for this video on the Tilta. Will look into it. For long shoots, I’ve added a shoulder strap (using PD slide lite) and I hook it onto the back handle of the RS2 so when my hands get tired, I can let it hang on the side of my hip without needing to sit it down. This way I can film all day without being sore.

Thanks for this video, it helps me to figure out what i realy need 👌🏻

Still using the Ronin-M with the SmallRig ring & feet and don't plan on changing (unless they release an M2 or something with the same design, which would be dope). I love this thing. I'd like to have a smaller one for smaller run & gun shoots, but for music videos and bigger productions, it's still my go-to. I had a Crane V2 with the dual grip setup and it was such a pain having to rig it all up. I leave the Ronin together and only have to put on the camera and monitor, and I'm ready to go. Recently got a Ready Rig (because I'm weak as hell lol) and it's such a fun setup to use, especially when trying to control a follow focus at the same time. I like what Tilta is doing, but it would've been nice to have the handles connect with the screw on the top or bottom if possible. That way the handles can't slide up or down, but rather left and right.

The RS2 can really do it all!

Thanks bro! Helped me alot ❤️

Great review, this was super helpful, thanks

Hi Brandon, Did tilta reached out to you again regarding the issue with the right handle! Did the issue got solved now? Because I am planning on buying this dual handle grip setup. Also someone has given a review with the same issue on the tilta official website.

Thank you for the review Brandon. Have you tested it with the Titla Lens Control Handle for manual lenses?

Thanks brotha!!!! 🔥🔥🔥

Wish I saw this. Just bought the small rig. Might have to send it back

Great vid -- one thought, maybe if you added this to the back it would take it to the next level. Then curious around mounting onboard monitor is my next curiosity / concern

Hey Brandon, what lens do you use with your C70 when doing your real estate videos?

Thanks for sharing, Brandon. Do you think the C200 will fit well with a sigma 18-35?

I shoot real estate Brandon. I would love to see how you start/stop the camera. Are you doing that with the handle? Also.....what about mounting a monitor so you can see what you're filming.

Slightly off topic, but when you use RS2 with Komodo, how do you power Komodo, and how do you monitor picture?

Did TILTA send you a new RHS arm? Did you fix it ? Is it just a factory mis hap? (Isolated indigent) Or is this inherently with all their gear on this rig set up. Good catch BTW... Seeing you almost drop the set up made me think WTH !!! No way. All because of a screw issue? That’s really bad.

I'm getting the tilta ring advanced for the ronin rs2, it looks bomb!

Great Review. can this system be mounted on a monopod?

I've used alot of gimbals and nothing has performed as well as my OG Movi M5, I love that thing. Carrying around a stand is annoying but the footage looks great. I'm considering trying the RS2 with tilta advanced ring.

@bwashmedia

3 жыл бұрын

Yea I’ve been looking at the ring too but it’s backordered!

@Deds007

3 жыл бұрын

Totally, I love my M5. I wish Movi would release an updated version for half of the price of the movi pro.

@Shot_by_Syn

2 жыл бұрын

@@bwashmedia 1 year later, hows the setup, holding up? im heavily looking to purchase one.

Thanks for the quick review! Ita possible to control the camera/focus features form ths Ronin handle thru this setup? I've seen Tilta is selling their own controled handles... so I wonder if the Ronin one only suplies power... thanks!

Thanks Brandon, I wonder if it will work with the Ronin SC or SC2?

@user-dh5fp4gw1b

2 жыл бұрын

Sorry for the late reply but unfortunately it doesnt work :(. Planning on selling my sc2 for a rs2. I bought the pro combo but NEVER use raveneye and the motor :(

Why did you go with dual handle and not the ring grip. Is it only because of the size or are there other factors?

Hello Brandon, Love your videos! Would this Dual Handle Grip work with an Easyrig? I just purchased a BMCC 6K Pro, Easyrig Stabil, and Ronin RS2 and am looking for a dual handed solution to hang from the Easyrig. Also, did that screw problem you mentioned in your video get resolved? Although I do own some Tilta equipment and am satisfied with it I've heard some mixed reviews on their basic and advanced ring grips. Please advise. Thanks!

@flipnap2112

Жыл бұрын

dunno if you figured it out, "cinemilled" has a few solutions..

I bought one of these Tilta Dual Handle, just got it yesterday and noticed that one of the piece (where the Ronin Handler goes) its loose. I've contacted Tilta support and I got reply in hours, and we already scheduled a repair. I was afraid to get it based on your experience, but seems that they have improved the service or something else happened, because they have been very communicative on all their channels, before I bought it I contacted them about this issue your having, and they said it was solved, that's why I bought it. For me the costumer service has been very helpful and quick. Maybe you should try to contact them back again, maybe your more lucky this time!

@L6XXMEDIA

2 жыл бұрын

Thanks for making this comment I also wasn’t sure about buying because of this video but mines is completely ok

Thanks 🙏🏽 One question I have is how to focus manually while having right and left hands on the respective handles. For those who aren’t using auto focus? Great tutorial regardless- did you have a solution though? Also, would be rad to see a 7” monitor rigged up here (actually maybe you did that)

@L6XXMEDIA

2 жыл бұрын

a remote control handle google it

Do you think it's a good idea to use this along with the tilta rear operating handle?

Quick question... after a year... do you still recommend the Tilta Dual setup? I just bought the RS3 and want a dual setup.

Could the BMPCC6K fit on here? Also, how do you like the rs2 in inverted mode? I felt like the S was pretty bad in inverted.

Do you have any update from Tilta with the faulty handle?

What about focus roller?

Do you have an official full review on it ?

Let's see the full review brandoooonnnn

Can you operate the start/stop record functions from the Tilta dual handles?

Thank you

Curious if you ever solved that issue with right hand arm slipping off the nato rail. Did they send you a new one? Or find something else to make sure it's safe and secure. In Tilta's official video, it seemed like there was a locking pin. I wonder if that's an updated version, or if you have it but it still finds a way to slip off.

@wearecraving

Жыл бұрын

They said they’ve solved the issue and are sending me another out

Were you able to fix the handle issue?

thank you for this video.. can i use it for the ronin rsc 2 ???

I bought a gimbal last year....other than some tests balancing it and whatnot I haven't even found a use for the thing haha.

@bwashmedia

3 жыл бұрын

Are gimbals dead?!

Hi! HELP!!! Since you mentioned you use it with your Komodo what follow focus system do you use? I‘ve seen a lot of videos where people complain that this doesn’t work with all lenses (DJI rods are too short, the system is statically unstable and so on). What do you use? At the moment, this single topic keeps me from buying a Komodo+RS2.

@EmeraldAudiovisual

Жыл бұрын

DJI uses 12mm rods, which are typically used for drones, so it shouldn't be too hard to find longer ones. Another option is the Smallrig 15mm to 12mm rod for DJI, that you then can extend as you see fit.

Awesome, Awesome, Awesome job on the review. Concise and great perspective! Thanks Brandon for making these videos!!!

Have you stress tested yet, mine fell apart under real world conditions twice, the v mount plate failed and the setup drains the baterry so fast, I had 6k pro on it so maybe my setup was too heavy; I torqued that thing and mine broke, I’m on the float now and this is a dream, mid comment saw your break, sell it and get the float

My problem with this Tilta handle is placement of external monitor and the balance with a V-mount battery on

@bwashmedia

3 жыл бұрын

I guess with the battery it would feel lopsided.

I find this dual handle to be a pain in the ass when you need to change anything in the setup. I still think the advanced ring grip is the way to go.

Are there controls on the dual handles? I like having my hand near the controls.

I bought the basic ring grip for my RS2. Kept getting pushed back but supposedly getting it by end of feb

@basedviet

3 жыл бұрын

I've been waiting on my advanced grip too. Where did you hear that you'd get it by the end of February?

@TheInfluenceStudios

3 жыл бұрын

@@basedviet they emailed me about a delay in the product due to changing supplier. So they said it would be another 4-6 week. So I emailed them back asking do they have more of exact eta on the shipments and the lady told me it should be in closer to the 4 week point

@basedviet

3 жыл бұрын

@@TheInfluenceStudios thanks for the info. Hopefully sooner rather than later!

@oliverclrrk

3 жыл бұрын

@@TheInfluenceStudios Did you end up getting it? How is it?

@TheInfluenceStudios

3 жыл бұрын

@@oliverclrrk yeah I got it. I love it man. Definitely feels my sturdy

If you’ve ever snapped the handles of a ronin M you’ll understand why I am very skeptical of this grip.

have you think putting the tilta rear operation control handle for rs2?

i will order one i like it i feel will make job easy to carry long time , thanks foe video.

@ahmedjuffairi

2 жыл бұрын

i check it and nothing happened to secrw so i think you need to check tilta about it

how would you mount a monitor /external recorder on this? I bought this setup and now can't figure that out with my atomos ninja

Hell I’m looking for a two handed grip for my Weebill S. Any suggestions B?

hi great video, could you fit c70 on ronin m?

also... what do you do for Lights with this setup?

Can you add external monitor and k3m mic to this setup somehow?

Damn if this was cheaper than the basic ring, this would be my go to, but being basically the same price, I wanna go with the ring, just because of the extra mounting space. I do like the briefcase handle tho...

@prostigeMarketing

9 ай бұрын

I got the dual handle power bracket for 200, but I replaced the the included handle with the control handle from the ring grip to be able to control focus. Got everything for 368 from b&h. I bought used, and looks new lol.

Hi, do you have horizon problem with RS2?

Despite all the red flags, I'm going to buy it anyway. It's a clean setup, as long as it stays together. Hopefully I can mod it and keep it from snapping.

@robertbergmann425

2 жыл бұрын

Did you buy it? How is your experience? Thinking about that myself

Link for the spotlight you have frame left?

I’ll just stick with my favorite gimbal...DJI Pocket 2. No chiropractor needed, and it’s Fun.

@YoungBlaze

3 жыл бұрын

but.............but................

Can you record and move settings from a handle ?

Can you make a video of balancing the bmpcc6k on the RS2 combo both with the follow focus and raven eye please 🙇🏿‍♂️🙇🏿‍♂️

@bwashmedia

3 жыл бұрын

I’ve been struggling to get a raven eye. They are sold out.

@shogelolajacob6106

3 жыл бұрын

Ok thanks so much

@shogelolajacob6106

3 жыл бұрын

@@bwashmedia can you make a video for the full rigging of the bmpcc6k please

So I picked up the RS-2 and was super excited about using it with my BMPCC 6K Pro with the sigma 18-35, but apparently a black magic update has caused the gimbal to not work with controlling the camera any longer with the USB-C control cable. DJI Support asked me to go back to version 6.9 to fix. Not a real solution. Anyone else having this issue?

0:51 🤣 Hey bro, in about 8 months you’re going to be buying a $30k Red VRaptor. 😳😳😳

Hey man, just got mine today, right out of the box I have the issue with the nato security point, have you got any news from TIlta?

@DominicCarterTV

3 жыл бұрын

I’d like to know this too. Now I’m paranoid. Hahah Mine should arrive tomorrow. What’s the update? Are you still using this setup?

@nicolascolque5947

3 жыл бұрын

@@DominicCarterTV I had to return it, got the DJI dual handle instead

does all this work on the rs3?

Good vid...I had to say it cause I see very few

What about that Benro you loved so much?

What do you editing videos with? Are do you have more than one editing solution BRANDON JAY

Does anyone know if you can mount a monitor to this setup?

What the weight limitation

Does anyone know if this works with the rs3 ?

How does the C70 balance? Do you need counterweights?

@bwashmedia

3 жыл бұрын

Nope no counter weights

@ErisedMediaCo

3 жыл бұрын

@@bwashmedia thanks!

focus. what about the focus wheel...

Yo Brandon nice review, i just looking your shirt men it is really cool, post the brand or web (this is a straight comment im sweare haha)

I bought the tilta dual handle today and sadly it suffers the same faulty safety pin that's supposed to lock the handle - making it unusable. I don't understand how a obvious production flaw like this made it through their QA. Has anyone a managed to come up with a solution?

@Whopears

8 ай бұрын

use an allen key to tighten it

the focus motor has the same problem. you can not tying it down as it should be and therefore it slips out of the lens gear. The nuts and bolts are to weak for de focus motor and the rod. not reliable and a broken connection as result at day one.

This was my first time watching him and I thought it was Michael B Jordan Lol

Man, I'm gonna get you a back workout Brandon. If my fat ass can handle a MoVI for a full day your in-shape self can too! ;)

DJI makes their own Bars and hand grip remote it's way better take a look at it I have it and love it with NO issues. Nice video

@YoungBlaze

3 жыл бұрын

whats the name set up

@town3

3 жыл бұрын

@@YoungBlaze Hey YoungBlaze just go to dji.com and its on there website you can't miss it look for RS2 and go to accessories theres tons of things they sell for it.

Hate to be a downer, but I havent even touched a gimble in over 2 years lmao. cant stand em. :( BUT.... Great video none-the-less!

@bwashmedia

3 жыл бұрын

I get it

It just happened to me, the whole rig decided to split in half right on the middle of a shoot

You will never need anything else after you have bought the RS2.

This is why i hate my weebill-s. I prefered my cheap zhiyun crane (first one made so didnt have a name) with its dual handle

im not going lie I miss my Ronin M and none of these pistol grips do it for me

@bwashmedia

3 жыл бұрын

Feel my pain!

@MoiseNicolas

3 жыл бұрын

@@bwashmedia lol yes also you just got a new subscriber didn’t even know about your channel..

HAHAHAHAHAHAHA

just having a peek here. In other words, ... eye brows.