if you want to make your laser last longer and get better results use a lower laser power and a slower cutting speed. Quality takes time.

@BaitLessCo.

Жыл бұрын

Good tip. Any settings you recommend? For leather specifically?

Excelente presentación. Muy buen trabajo. Compré una. Ahora va a ser más fácil el armado. Muchas gracias.

Thanks to Jerry for so good video and looking for more cutting and engrave details! 💙

nice build

Thank you for your video, this help me a lot because I'm deciding to buy this model.

@3DHP

2 жыл бұрын

Awesome, You will Love it.

I'll be cracking the TwoTrees box open next week. *NOT* looking forward to the assembly, *but I love* the adjustable head and magnetic cover!

@3DHP

2 жыл бұрын

Great little laser , goes together real easy. You will love it.

@TheLouisianaHobbyGuy

2 жыл бұрын

@@3DHP I despise assembly! 😎

what speed are you cutting? I'm trying to cut 2mm plywood and i can't seem to get it to cut through. i'm extremely frustrated with this machine, it engraves fine on wood, but i can't seem to get it to cut. thanks in advance for any help.

Alguém sabe me dizer se grava e corta couro?

What are the parameters for metal engraving and flask engraving, may I ask?

Hi. Do you know if I upgrade this laser with its 20 w head, do I need the air assist? Thanks

@3DHP

Жыл бұрын

Adding air assist to any diode laser will help you cut better and deeper. Cleaner cuts and stop possible burning of wood in some cases.

Great video, thanks! What settings did you use for the leather and the flask?

@3DHP

2 жыл бұрын

Image on leather was 5000 mm/m 90% power. Flask I think was 700mm/m 100% power line mode. Many company websites for different lasers have recommended settings,these are what I use. Also for the Comgro Comgo Z1 website, there are recommended setting. I only use Lightburn.

@adrianzgoda8185

2 жыл бұрын

@@3DHP Awesome, thanks so much for the advice!

Hello, I have almost this exact laser. Thanks for the video. Question, the red guide light is offset from the burning laser. Is that how it is suppose to be? Is there a way to align the two? If it is suppose to be offset, what is the offset? Thanks so much. I can not find anything about this anywhere. I have only used this thing a couple of times because I have a hard time centering my work.

@3DHP

8 ай бұрын

I no longer own this laser but it never had a seperate pointer to line up work.My XTool did and the cross hairs were dead center of your work. I suggest using LightBurn as your software. The are a ton of laser groups online.Like Facebook group and TwoTrees web site should have a help section or links.

@SonPoweredLife

8 ай бұрын

@@3DHP Thank you!

Very interesting design. I've never seen the sideways motors like that.

on the cutting board for example why is it darker on the left side and lighter on the right im havin the same problem but mine starts engraving light and gets darker as it goes

@3DHP

Жыл бұрын

The grain of the wood ,it will affect the color.

speed video... cool

I just received my first laser , a TTS55 and am setting it up . I also received the air assist but I’m not familiar with light burn or any cad programs saying that how do you import pictures? Most of my work will be on leather for keychains and bracelets and earrings. Any help would be appreciated !

@3DHP

Жыл бұрын

My friend Rich has a great channel on lightburn.This is one of many great channels. www.youtube.com/@TheLouisianaHobbyGuy

i got my tts 55 pro.. but im having some trouble with it. i sometimes get GPIO isr is not installed.. and also i tried to use it with wifi but my device cant find its wifi. even in lightburn when i connect it, it says no wifi.

@3DHP

7 ай бұрын

Not sure,email company or check on there facebook group.

I got one of these for Christmas i am at a loss how to do the engraving. I cant seem to get it to line up correctly for the item I am going to engrave can you help me with where to look up videos how to use the programs?

@3DHP

6 ай бұрын

I recommend using Lightburn and Rich The LaHobby Guy and Hobo with Wood are 2 great places to start on KZread.

Thank you for the video. I bought this machine a couple months ago as my very first laser. I have had success with engraving on wood but am struggling with glass. Do you have any suggestions? I’m just not getting the speed and power right.

@3DHP

Жыл бұрын

Buy Tempura Black paint from Amazon or the dollar store. Paint a few layers and dry it. even coats. Do a reverse image and test with different power and speed setting. If Two Trees don't have recommended settings for glass on there site,go to a different companies site and look at there recommendations,like Comgrow, a 5 watt is a 5 watt. Tempura paint washes off really easy.Dry Moly Lube also works as a coating in a spray can,but harder to wash off.There are other things to put on glass and mirror but I think Tempura paint is the cheapest and easiest way to go.Hope this helps.

@SerenaHaga

Жыл бұрын

Thank you. I do use tempura. In this video you mentioned you were going to try glass but I couldn’t find if you posted one. I thought I’d see if you had tried with any success.

@3DHP

Жыл бұрын

@@SerenaHaga I have done a few picture frames,don't remember my settings at the moment, Google etching glass with a diode laser.

@raytristani

5 ай бұрын

Tempura? Hahahaha!! You mean “tempera”. “Tempura” is a fried dish. I don’t think it will have the same effect as tempera black paint

Nice video and very interesting laser do you need to have a pc connected to it or can you use a SD card thx

@3DHP

2 жыл бұрын

Files can be put on the sd card, but you would need to create them on a computer.

what is the difference between tts 55 and the tts 55 pro? aside from the control board (tts 55 pro is longer)

@3DHP

9 ай бұрын

I have no idea, I would have to look at the specs online and compare.

Can you please recommend a colored laser printer

@3DHP

2 жыл бұрын

The only laser that can produce different shades of colors are Fiber lasers.I don't own any and can't suggest any.If I ever test and review I will post some videos about it.

Have you tried the rotary roller?

@3DHP

7 ай бұрын

Not sure if I tried it on that machine. You have to be careful with rotary roller since the tumbler or glass like to walk or move out of place. A chuck style roller will not move out of place.

Hello how do you set the printer up to your computer? The video they provide is in Chinese

@3DHP

Жыл бұрын

I pay for Lightburn software and run it from there on my Windows pc.

@3DHP

Жыл бұрын

here is a link to free laser grbl.Also on the chinese page you seen,there might be a tab to change it to english. lasergrbl.com/

Books with 'Words'........my Nemesis...Haaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

@3DHP

2 жыл бұрын

lol, I almost edited that out. But that is what come out of my mouth at the time.

Precio

Good video but that music over your voice no good but thank you for the video

can i engrave metal?

@3DHP

9 ай бұрын

You can lightly mark metal, for a proper deep engrave you will need a fiber laser.

@commenter-jv5gn

9 ай бұрын

is there an attachment I can get for this laser? how lightly do you mean, will it be visible? I am trying to engrave some ID tags for my new puppies i have some blank ones@@3DHP

@3DHP

9 ай бұрын

@@commenter-jv5gn It will etch the metal,you will be able to see it,but probably not feel it. I have many diode laser videos for you to check out.

@commenter-jv5gn

9 ай бұрын

thanks! ill check them out. Would a 10 w Laser be better than the 5w for this? @@3DHP

@3DHP

9 ай бұрын

In my opinion Yes