I am an Indian and Indians in general dislike Pakistan for certain political and geographical dispute related reasons. That being said, I hate to notice that some people from the west are pointing out the miserable working condition in this workshop. Firstly, it's not in India (but Pakistan). Secondly, unlike in some developed countries in the west, people over here (both in India and Pakistan) lack financial resources to equip their workers with the necessary tools and safety gears (with certain exceptions). I still find it great to see these workers doing their best and this is how many families thrive without complaining about the things they don't (I do not support it but I guess, to bring food for one's family is more important than being unemployed) have in their workplaces. Unemployment is one of the major issues over here and that's why, workers do whatever they are asked to do in any given condition. Moreover, there is huge competition between these manufacturers and producers. The margin is low, and hence they cannot go on investing more in these workshops, which ultimately has to be paid by the owners and I guess, given the circumstances, they cannot afford it either. Most of the construction workers too (from India and Pakistan) migrate to middle east and extend their labor work for meagre wages. The skyscrapers and fancy buildings (such as Burj Khalifa) standing in Arab countries have all been constructed by the cheap labor work that they received from India and Pakistan and they are forced to live in very miserable conditions. Lastly, your forefathers have looted and exploited our countries for centuries. We were quite a capable economy before the invasion and were brought down to our knees (financially) by the time Britain left India back in 1947. We do acknowledge that we do not have the access to advanced tools such as you but one fine day, things will get better for everyone over here and the world will see. These issue will get addressed in due course of time. And I'd not go on bragging about the advancement in Science and Tech that India has made in past few decades. An overall - holistic development is what I am talking about. No offense.

@abakarbatran1636

2 жыл бұрын

Well said thanks

@devendramishra7180

2 жыл бұрын

@@abakarbatran1636 someone had to do it.

@ZoonCrypticon

2 жыл бұрын

The missing safety measures is of course due to lack of finances. Still in the interest of the workers it needs to get attention and set in the minds. If one of the workers looses his limb, who is going to pay him for the rest of his life?

@ZoonCrypticon

2 жыл бұрын

Apart from this, whoever is filming these working conditions could divert yt-monetizing-revenues to pay them off for better safety procedures and introduce principles of caution, e.g. not going bare handed into etching solutions, etc.

@patrickvolk7031

2 жыл бұрын

The reason people are doing most of the work in Pakistan (and any other developing nation really) is the simple fact it's cheaper to hire people than it would be to get a machine. In other parts of the world, the workers are much more expensive. Also, as a shop owner in a developing nation, you can't make a million hex nuts when your demand is a couple of thousand. The owners also don't have the money to invest big. And the people do get exploited, and they do go elsewhere for better wages if they can. I know in Malaysia, a lot of the workers came from Bangladesh. Their camp was probably was ok by their standards, poor by Western standards. Every time it rained, they would have to drain all the water tanks. Dengue fever was a problem. It's how things were probably 100 and so years ago in the West, like when my parents came to America. Most of the foreign workers in places like the Middle East also can't bring their families, they're living in dorms, maybe having their passports held, sending money back home. India's thriftiness really has shown in their space program. Very impressive. The slums cannot just disappear, it takes time, it takes progress. It really takes global progress, country by country getting a little better. The thing that jump-started the US economy was WW II. Once people get beyond subsistence, things can change fairly quickly.

Amazing how health and safety is at the heart of everything they do!

@C2H6Cd

2 жыл бұрын

Oh the irony :)

@greenleaves6924

2 жыл бұрын

You mean osha didn’t show up?

@jlcsr9163

2 жыл бұрын

Ikr I am in manufacturing and I'm cringing! Not even wearing safety glasses and shoes at least. I mean seriously how much would it cost to protect the operators.

@music-jn3wn

2 жыл бұрын

survival is at the heart of everything they do!

@Qui-9

2 жыл бұрын

@@C2H6Cd switching stock... "Oh the aluminati" I'll see myself out.

Дико конечно, но процесс правильный. Проверить бы на динамометре. А так в принципе этим гайкам можно доверять, если конечно изначальный металл нормальный

Wow... All that work they put into their craft is just nuts!!

@IllyaLeonovMorganFreepony

Жыл бұрын

I saw what you did there.

@angus4463

Жыл бұрын

"Craft?"..

@tomward2688

Жыл бұрын

They do certainly know how to handle their nuts - no mistake!!

@zevfarkas5120

Жыл бұрын

Very punny!

6,000 years of civilization and India still hasn't invented the work bench

@anirudhatole2557

2 жыл бұрын

Btw its not from india , pakistan most probably indians are way ahead from this .

@teleman07

2 жыл бұрын

@@anirudhatole2557 No it is India. There is a shot in the video showing the brand as 'rta'. I looked it up, they are in Coimbatore, India.

@anirudhatole2557

2 жыл бұрын

@@teleman07 go to channels about and check yourself , what rta ?

@anirudhatole2557

2 жыл бұрын

@@teleman07 also 00:58 you can see a plastic bag on that machine which clearly has name faisalabad which i googled is in pakistan , and noone dress like this in india not even muslims .

@timothyshearer6538

2 жыл бұрын

@@anirudhatole2557 lmao nice subtle racism, either country has rural areas where people do industrial production with primitive equipment

Each nut lovingly made and guaranteed to be untouched by Health & Safety concerns.

@Juidodin

Жыл бұрын

I'm pretty sure some of them are named Osha

@sidsid9808

Жыл бұрын

@@Juidodin America WAS built before OSHA

@Juidodin

Жыл бұрын

@@sidsid9808 yeah that totally looks like American on that Video

@kierond86

Жыл бұрын

might come with some bloodstains or limbs too

All of those machines were once line shaft powered. They probably started off in England in the 1800’s and have probably been rebuilt 3 or 4 times already. It’s fascinating to see how obsolete machines can have multiple lives in multiple continents.

@goodmorning1476

Жыл бұрын

👍🙏

@prabenR

Жыл бұрын

Yaaaa wow so cool how hundreds more people can continue getting life altering workplace injuries all in the name of keeping prices low.

@mikebennet7697

Жыл бұрын

bearings, cutters and hydraulics are the only things that wear out. We have a deep bore drilling machine that predates WW2 and was used for making .50 cal machine gun barrels during the war.

@alistair1978utube

Жыл бұрын

It’s fascinating to see how people drop random apostrophes into plurals...

@chrisnorthall8317

Жыл бұрын

I've been to 100's of 'engineering' companies throughout my career, let me tell you there are companies like this in the UK, more than you think.

Welcome to what Britain looked like in the industrial revolution these men work hard risking life and lim for little reward but they are happy and proud to be employed yes the safety standards are diabolical by modern standards but how many of us would work a 12 hour shift like they do without complaining not many of us I take my hat off to them respect

@scootaloo118

2 жыл бұрын

What? No this is what slavery looks like. Hungry people working for a little wage in an unsafe condition while not complaining. Also while making somebody else a ton of money, slavery. Order out of Chaos! If you create a depression you control the outcome by controlling the people. And desperate hungry human being will do whatever they have to do to survive. These people are never allowed to question the fat cats sitting at the head of the table.

@falkirk8413

2 жыл бұрын

@@scootaloo118 didn't say it was right did I....no and if you knew anything you'd know that most of their industrial industries are like this And if you think this is bad search china's industrial side and the suicide rate of the apple I phone factory's mate

@steveashley241

2 жыл бұрын

X

@ianreed1528

2 жыл бұрын

They are indeed, Heroes. Bless them all

@S.D.P.

2 жыл бұрын

@ falkirk: how do you know they don't complain?

Harbor Freight processing plant

@MikeyJ686

Жыл бұрын

Hahaha 🤣

@cloudyeight

Жыл бұрын

Made me laugh. Thank you.

@quackula9190

Жыл бұрын

😂😂😂😂

Watching these guys work around this equipment with no guards give me chills. This is insanely dangerous.

@dnoloc

Жыл бұрын

They are ok. They got their safety sandals

@user-iv6wd4sp2m

Жыл бұрын

@@dnoloc и бронированный халат 😜

The same techniques used to make nuts and bolts for the Ark.

@buxvan

2 жыл бұрын

Stop it. I can't stop laughing now !

@user-qb8gv7ou4h

2 жыл бұрын

Йй

@rustyshakleford5230

2 жыл бұрын

Such a labor intensive and ass backwards way of making garbage fasteners from garbage steel.

@sint5990

2 жыл бұрын

Threaded fasteners didn’t come around until the 15th century and widespread use of them was mid-18th century. So while the substance of your comment is utter hogwash, it still made me laugh so hard that my drink came out my nose.

@MrJackandEmily

2 жыл бұрын

Nah because DaVinci invented them..

These videos never disappoint, although this process is rudimentary, it fascinating to see how it all started and how much we have progressed. I only wish the workers the best, may they stay safe and healthy so that they could continue to provide for their family.

@mbahcarrier1629

2 жыл бұрын

Agree sir, family is the most important

@Glum1964

2 жыл бұрын

What a great comment. 👍🏼. Glad to see good people.

@isaacandrade3783

2 жыл бұрын

Reading a comment like this lets me know right away the person who wrote it has a big heart and appreciation for life. It’s indicative of a hard working solid individual to appreciate the process

@xhames61x

Жыл бұрын

Stay safe? There is zero safety consideration.

@hobbyless4089

Жыл бұрын

@@xhames61x that is correct, they can't change their safety standards overnight so the best they can do is have a state of mind that will keep them safe. No one goes to work with a mentality to get hurt.

Truly amazing process, only about 150 years behind.

@sirmalus5153

2 жыл бұрын

I was just thinking the same thing. That vat of liquid 'cleaning' the rods must be murder on the hands long term. All that was missing is the water driven wheels and belts.

@beefchicken

2 жыл бұрын

​@@sirmalus5153 That vat most likely contains hydrochloric acid, it's used to remove the mill scale from the rods that would otherwise destroy the drawing die that converts the round stock into a hexagonal profile. It's a bit silly they're bare-handing it, when a solution-maybe some tongs, or a lifting basket-could easily be fabricated using materials they have on hand. The only reason they're doing it is because that's how it's always been done.

@MrSteve280

Жыл бұрын

Modern processes can seriously threaten jobs in countries with developing industry. Korea was like this in many regards when I was there in the early 1960s. Now I have a new Kia in the driveway and it's the best car I've ever owned.

@dogdooish

Жыл бұрын

@@beefchicken Wouldn't it be great if you could contact them, pop over and help them build a simple lifter! I bet you could afford it --- easily!

Now that’s premium quality right there

Men working harder than most American men. Doing as men should be. And I see smiles as well!!

Когда болт является калибром- это круто!

@MegaElektrik

Жыл бұрын

Если ещё и сделан по такой же технологии, то да!!!🤣

Looks like a pajama party 🙈

What grade nuts are those? Trash 1 - guaranteed to strip out with 10 lb-ft of torque

@feoyjodido1372

2 жыл бұрын

Any torque meter will give it away

After a week in that factory you'd go nuts.

@bernardosanchez7627

2 жыл бұрын

Thats is true for weak minds.

@-ChrisD

2 жыл бұрын

Ha! Clever 😏

@-ChrisD

2 жыл бұрын

@@thehoneybunn Lol, exactly... I'd bolt outta there quick like.

@khiali100

2 жыл бұрын

@@bernardosanchez7627 old fashioned work

@alishermahmudov3895

2 жыл бұрын

@@bernardosanchez7627 г⁶

Like these guys producing everything they need with everything they have with everything they can. God bless them !

@netts2315

Жыл бұрын

Pretty sure hexagonal nuts are produced in a lot more places than just India or Pakistan or wherever this is.

As a mechanical engineer i can swear i smell this video. Amazing.

@bobsondugnutt2762

2 жыл бұрын

I am pretty sure that _"You can smell this video"_ is the slogan for Tourism India's KZread channel.

@edwardmartinez9459

2 жыл бұрын

​@@bobsondugnutt2762 That looks more like Pakistan.

@whereswaldo5740

2 жыл бұрын

Pretty much covers all of Asia.

@beefchicken

2 жыл бұрын

mmmm rancid cutting oil

@Thenotfunnyperson

Жыл бұрын

Yes so true. Mechanical engineers are often directly involved in observing labor processes of thing that have been done the same way before you were born.

I'm realizing this is what the manufacturing looked like in the 19th century. And the technology was brought to India by the B. Empire, and what we are seeing here is just a sample from back then.

@blackchalksounds5278

2 жыл бұрын

Yes you are right, these machines are from 1940 to 50s, there are still few factories in UK who still run these machines from that era, they got to be constantly maintained every day, some twice a day, serious bit of heavy duty engineering tools

This has been a most shocking but also inspiring video. Shocking from the view point of terrible safety issues with every single machine, this plant is filthy, dangerous and a disaster waiting for multiple things to go badly however the speed and skill of the employee's cannot be denied and I applaud that. A respectful industry would and should give these men the workplace they deserve and they deserve the best.

@stevencebula6300

2 жыл бұрын

My thought also.

@stevemasta2753

2 жыл бұрын

Don't worry! Those are OSHA approved sandals.

@kaitlynlsari681

2 жыл бұрын

@@stevemasta2753 phew that's a relief.i was worried there for a while

@lesfox2010

2 жыл бұрын

@@stevemasta2753 Yes, they are Chinese safety boots.

@walterwright7896

2 жыл бұрын

This is how we used to make stuff years ago.

So glad I made it through the whole thing - Such an AMAAAAAAAZING technique ;-P

@06:05 I love the non-existing safety measures. Left hand still under the press, while the right hand accidentally activates the lever, in situations where the worker might be tired, distracted, etc. Somehow reminds me of Charlie Chaplins "Modern Times".

@stanislavkindiakov6334

Жыл бұрын

This machinery is definitely from Charlie Carlin’s times if not older

@ninja5672

Жыл бұрын

In these parts of the world, I'm sure making a mistake like that is considered your own fault rather than the employer's fault. I guess just don't do that and you won't get hurt.

Very Hardworking Men...!!

These are much better nuts than modern ones

너트를 이렇게 만드는구나~ 좋은 영상 감사합니다.

During a walkabout at an Edinburgh electronics factory, Prince Philip remarked that a fusebox bursting with wires looked "as if it was put in by an Indian". His remark prompted immediate condemnation. Still,I see where he was coming from !!

@icarusamerica3436

2 жыл бұрын

Cannot condemn someone for speaking facts. I say things like that almost daily when talking about the workmanship on certain jobs, sometimes it is positive sometimes it is not.

@ZacLowing

2 жыл бұрын

As a building maintenance man here in the states for 40 years, this whole thing gives me the willies! So many exposed connections, mechanical things that can grab all the loose clothing. I mean, I've seen a loose conection before, you cut the power, open it up, tuck it in and screw it down, 1,2,3. But here, they NEVER bothered.

@kingklabe

2 жыл бұрын

@@icarusamerica3436 That idiotic and overtly racist opinion is not a fact and if you do the same on a daily basis, well, let's see how long you last before your opinion that you think is a fact gets you in more trouble than you are able to deal with.

@davidworsley7969

2 жыл бұрын

@@ZacLowing To be fair, it's not that they're lazy it's just that it's always been done that way- scary but what can you do?

@davidworsley7969

2 жыл бұрын

@Billy The Goat For a lot of Prince Philip's life, there was no Pakistan-It was all India- Not really worth getting upset about.

I find the most suitable footwear for this sort of hard labour happens is beach sandals. The older the better.

@tacticalant3841

2 жыл бұрын

That and safety squints, evidently safety Hazards are only present in western countries.

@usmanghani9328

2 жыл бұрын

what if proper working boots cost too much?

@tacticalant3841

2 жыл бұрын

Usman Ghani - honestly i dont think its a matter of cost. Its really a combination of culture/habit and ignorance of risk. I see Americans on KZread building stuff while wearing flip flops. Besides, these guys are amazing innovators and skilled workers, if foot protection was important to them, they would have fixed the problem by now.

@danburnett808

2 жыл бұрын

Dipping your hands in a caustic solution toughens up your calluses...

@rjowen

2 жыл бұрын

@@danburnett808 that's how Kim Kardashian prepares for another day down the mines.

Awesomely dangerous work environment

I think hearing protection would be one of the cheapest things to implement here for the health and quality of life for these workers.

@6Diego1Diego9

Жыл бұрын

what about foot protection? or even eye protection

@stanislavkindiakov6334

Жыл бұрын

What is ‚protection‘?

I bet these guys are just thrilled to wake up and get to work every day knowing there's no chance of injuries on the job....OR..No chance of keeping fingers beyond 3 months.. take your pick. I remember working in similar shops many years ago. The attrition rate from injuries was phenomenal.

@iz5772

2 жыл бұрын

Thank God they're insured

@scotprentis3918

Жыл бұрын

I didn't see any of the older workers with any limps or missing limbs when you're focused and skilled worker you get to keep your limbs talking on cell phone or daydreaming about your lady is doing while you're at work is when you tend to lose your limbs

@netts2315

Жыл бұрын

@@scotprentis3918 Who's to say the older workers worked this job for a long time?

The machines all working with their own rhythm sounds cool. Like a familiar sound is about to happen anytime. Lol. I find it interesting to watch you guys make and repair things with knowledge and tried and true basic methods.

@obiyoukenobi

Жыл бұрын

´The machines all working with their own rhythm sounds cool´.. after some double shifts its so not cool i can imagine

@JV-pu8kx

Жыл бұрын

I worked in a print shop and when the windmills (letterpresses) were running what rhythm! Seriously, though, these use a row of suction cups to lift each sheet of paper, and every time the air pump did its thing I thought a sound engineer was going to come running in and record a dragon breathing! Always fun to watch, and listen, to all of the gears and levers moving.

Just incredible the work you all do. Well done.

Genial!

Good to see everyone is carefully wearing their safety sandals. Wearing long loose clothes in the vicinity of powerful and rapidly spinning machinery. Nope, can't see any issues with that al all.

German equipment seized after WW2 ended up on ships to be discarded after many years. Their onboard machine shops had this gear that outlasted the ships. That’s how it got there mostly.

@MrAbeAllen

2 жыл бұрын

glad it got used. still useful obviously.

@hydorah

Жыл бұрын

A lot of it is old British stuff too. Ironic really as barely anything is made in Britain these days - And these lads are still using it all!

@watchman1872

Жыл бұрын

Quality machinery built to last a lifetime, or three.

This is how every prosperous nation got its start: through decades of dangerous, dirty, elementary work, gradually becoming wealthier through sweat, labor and ingenuity. Succeeding generations owe respect to the pioneers of industry and their sacrifices.

... That's just nuts!

Молодцы! Люди работают и делают нужный товар!

La verdad es que el vídeo es muy interesante. Imagino que filmado en Pakistán. Ver a esos hombres trabajando en esas condiciones, agotadoras y peligrosas y sin elementos de seguridad, me hacen pensar en cómo eran esos trabajos en el mundo desarrollado a principios del siglo XX o en Inglaterra en el siglo XIX. Me alegro que las cosas han cambiado en Occidente y espero que también mejoren en países menos avanzados. Lo positivo del vídeo, sin duda, es que mucha gente no nos podíamos imaginar como se hacía una tuerca.

These machines have been around so long they've certainly paid for themselves MANY times over the 👍 They have definitely got their money's worth out of them!

Good work guys!!!

I like how he protects his hands from the acid bath with NOTHING!

@thefreedomguyuk

Жыл бұрын

It's not really acid, it's vinegar.

@PhilepZ

Жыл бұрын

@@thefreedomguyuk it's not really vinegar, it's old wine.

@netts2315

Жыл бұрын

@@PhilepZ Someone also said it's hydrochloric acid and it's used to remove the mill scale from the rods. Can't know for sure unless you guys work there or something?

@zevfarkas5120

Жыл бұрын

@@thefreedomguyuk Vinegar is acid.

Unlikely to be 8.8 I'm amazed at how labour intensive the production is.

Great work gentlemen!

The safety is everything, well done…..

I'm so happy that in Europe this is not posssible at all. We have strict work rules, and PPE are compulsory for workers and all the machine have to be up to standard. Thank you Europe!

@thesushifiend

2 жыл бұрын

What do you mean? Did you not see their protective sandals?

@isaacandrade3783

2 жыл бұрын

Hahaha this gold nugget of a comment

@wahyutriwibowo1803

2 жыл бұрын

They (Europe) used to be like this at Industrial revolution age. It's just South Asia is in early to mid Industrial age. Also remember safety rules is written in blood.

@watchman1872

Жыл бұрын

Your comment reminds me of the joke: A beggar says to a woman in a fur coat, "Hey lady, I haven't eaten in two days". She responds, "Force yourself". In third world countries, much of the PPE, machinery guarding, and safety / environmental regulations are economically impossible for a small business like this one. Little businesses like this one tend to operate on razor-thin profit margins where every penny matters in ways that the typical European of American just can't imagine. And to make matters more worse, small manufacturing operations like this one often must compete with companies with more modern, efficient equipment, operating in that country. Implementing a small fraction of all the relevant OSHA and EU regulations could easily bankrupt a business like this one, rendering all its employees jobless. In trying to save a finger, you might wind up starving a whole family instead.

@prabenR

Жыл бұрын

@@watchman1872 its ideologes like your that keep people under the thumb of the 1st world. We need to pay more and demand more from the people providing the goods and services. In no reality should it be possible to "force" somone into this situation. The only reason you have this opinion is because you live in a privileged economy

Ah! Workplace safety is obviously paramount

Excellent videos ! 👍

Great job guys

That's a bunch of hard working guys right there.

Всё вращается, ограждения нет, защиты глаз нет, работники босиком, в национальной балахонистой одежде. У меня по копчику холодный пот течёт от этого видео. "Несчастные случаи были? Будут". Но конечно молодцы, с улыбкой работают, не курят на работе, не бухают, в этом есть какая-то первобытная сила, этих людей.

@alexsulaev4045

2 жыл бұрын

Вот оно советское оборудование ,разворованное и проданное в период перестройки в качестве металлолома.Даже крепёжные болты с русской символикой😒

@arzya13

2 жыл бұрын

Даже смотреть страшно. Я, как-то решивший поспешить и не снявший перчатки при работе со сверлильным и чуть не оставшийся без кисти (спасла защита, стоявшая на станке), теперь без страха не могу смотреть такие видео

These guys are Nuts!!

The modern deep sounds, tones and rhythms are more amazing than the nuts and bolts.

I can smell the oil and grease and rust and the machinery and the memories as I was working in the metal shop in my 20's

@dhart8451

2 жыл бұрын

Same, 6 months . Saved up to go to school and I was out. I think 6 months in prison would have been easier.

My fav part about these videos is the way health and safety is addressed in different places.

@emilyramsey9079

Жыл бұрын

What places? Point one out, just one. Lol

why is it that all these amazingly skilled workers, doing amazing things, amazingly all live in the desert. Using outdated techniques and equipment?

*It is a real machining of parts as you can see the experience of its workers. Congratulations*

I worked for a company in Pa. that made roofing nails ,among other things Three things you can't imagine ,unless you done something like this. 1. Yes ,the noise is loud and continuos in the whole shop. 2.The metal shavings every where and I mean every where.3. The smell of oil is everywhere also. Oil is necessary for the machinery and drill bits. You never get past the smell. The best part of that job was being on 3rd shift [no big bosses, and a lot cooler in the summer time]

@walterwright7896

2 жыл бұрын

I used to run turret lathes like that but no sandals like at the beach.

Prince Philip was obviously telling the truth , sadly the truth is unpalatable to the limp and entitled . Great product , great video 👍🇬🇧

Wow absolutely amazing how safe their amazing work robes are

thats nuts!!

Much respect for these workers. Everything there is so labor tedious. And obviously no OSHA...

@boondocker7964

2 жыл бұрын

Tough way to make a buck, hard working lads.

@Chris.Rhodes

2 жыл бұрын

OSHA would have a field day, from shoes, to safety switches, to breakers, to live wires just dangling....jesus. i respect it though. This is why third world countries have such high fatalities with electrocution.

@Golfing422

2 жыл бұрын

No OSHA is very globally competitive

@teleman07

2 жыл бұрын

Respect to uncortrolled birthrates, no education, rampant ignorance? Nope.

@craiglister2139

2 жыл бұрын

It is called population control.

They really need to pay a visit to the shop that makes steel tables and carts.

@phillhuddleston9445

2 жыл бұрын

Or at least wooden ones 😞

МОЛОДЦЫ

I love video like this👍 And made in Pakistan 👍 Respekt

Awesome metal recycling job, even with simple tools. Thanks for the video

@Psalmosofficial

2 жыл бұрын

kzread.info/dash/bejne/mqKpzJOClLitgKw.html

@user-ih1ko4uy2p

2 жыл бұрын

БЫСТРАЯ ГИТАРА. fast guitar- kzread.info/dash/bejne/dnd2zq2JqruzmMo.html

Dump it on the floor. Pick off the floor. Dump it on the floor. Pick it off the floor. Repeat, repeat, repeat. The only amazing thing about this video is the inefficiency of the process.

@michaelcripwell1724

2 жыл бұрын

When Labour is cheap.

@jimfarmer7811

2 жыл бұрын

@@michaelcripwell1724 It's been more than 60 years since the Japanese companies showed how to efficiently manufacturer high quality products using minimal resources. By ignoring even the most basic efficiency improvements these people are locking themselves and their children into an endless cycle of poverty.

@AS-ug2vq

2 жыл бұрын

@@jimfarmer7811 mostly these people buy old machines from Europe on their way to scrapeyard, fix it then use them for small scale manufacturing. They don't have money to invest in automated plant.

@jimfarmer7811

2 жыл бұрын

@@AS-ug2vq I'm not talking about automation. They could make a lot of efficiency improvements by simply better organizing the workplace. Also they could get a better price for their products if they made them to a higher quality standard. By refusing to make even the most basic improvements they are locking themselves into a cycle of poverty.

@user-qs9vm7fr2b

2 жыл бұрын

One nut forming machine can replace this horror.

2:09 Every morning for me

చాలా బాగుంది super

I am sure the stuff in the basin at the beginning should never be touched with bare hands according to what it does with the metal rods.

@PhilepZ

Жыл бұрын

No worries. Their hand have layers and layers of dirt, oil and dead skin cells over the skin. They are well protected.

@nganphan4288

Жыл бұрын

@@PhilepZ 3.

@WHJeffB

Жыл бұрын

It's OK... When the kid dies at 22, there's a line of 14yr olds to take his place.

Always so clean and organized.

I'm glad everyone is wearing safety flipflops !

Gajab technology 🙏👍

My respect grows with each video of these guys.

@bennynielsen1412

Жыл бұрын

...so does my disgust.

@joeallfrontsquiet8797

Жыл бұрын

@@bennynielsen1412 troll alert.

I NOW HAVE A LOT OF RESPECT WHEN I BUY NUTS AND BOLTS. HARD WORK.

@MyKonaRC

Жыл бұрын

These are not same nuts you buy at the store. Ones you buy are made from 100% automation.

That’s nuts!

Nice recycling process

They never heard of screw machines I guess

Very interesting but I can't help noticing some inefficiencies. Way too much time spent transferring the nuts from the floor into bowls, they could set up the chutes to go into an empty bowl and just rotate them. Lots of bending over too, no regard for back problems.. ouch. And lots of energy expended picking things like rods from ground level instead of setting it up an waist height. Let's not even start with safety... But still, very interesting video, thanks for publishing!

@87mini

2 жыл бұрын

That's because labor is cheap and easily replaced.

@beefchicken

2 жыл бұрын

​@@87mini I think it has more to do with momentum. People will keep doing things the way they were taught, and if someone suggests even small changes to make things better, they will resent the time "wasted" on the improvements. "Quit screwing around with that toy you're building and get back to scooping up nuts! I don't pay you to think!"

@jasondashney

Жыл бұрын

I actually disagree that the bending over will cause back problems. I think it will do the opposite. These guys go into an ergonomically sensible squat as opposed to bending at the waist and I bet you that on average these guys have less back problems than regular chair-sitting office workers. The fact that they are carrying a reasonably heavy load in front of them when they stand up I could possibly go either way, but I'm willing to bet that they have unbelievably strong backs and their bodies are healthier than we'd assume.

Sécurité au travail ! ! ! ! !

Well done!👍☘️

0:00 Motor electrical box cover missing? No problem, just cover it with a tied-up rag! 0:41 That guy reaching into the phosphoric acid bath (?) up to the elbow must have the cleanest hands and arms in town! And those loose garments around all those exposed belt drives? Yikes, that would give me the willies.... They seem to be doing okay with it though, I didn't see any missing limbs or fingers on any of the workers. Incredible!

@prabenR

Жыл бұрын

We only saw a day where there was no workplace injury. They prolly lose some one every month.

Hats off to their skill ! Without an engineering degree they can still do a great job 👍 But safety and health is almost Zero here. Please apply some safety atleast PPE.

This is nuts!

I cannot believe this is a OEM supplier for Boeing.

These are hex nuts with plus minus ? mm

Now that's some next level technical precision there. Still I got to admire their work ethic. Damn they're getting it done

@6Diego1Diego9

Жыл бұрын

its not precise at all

@jasondashney

Жыл бұрын

"Work ethic" only really describes people doing things they don't have to. If you have no choice it's called "I like to eat".

tout a fait incroyable ces hommes ,de l outillage basic, et un travaille super bravo

Absolutely gorgeous and refreshingly real. Thank you for making this video.

@prabenR

Жыл бұрын

Refreshing? Id love to see how refreshed you would feel after a 12 hr shift on the nut press.

Soft nuts. You can see the steel cracking when they draw it

@GeneralMe100

2 жыл бұрын

mild steel hex nuts are not always supposed to be case hardened, It depends what they are for.

@Golfing422

2 жыл бұрын

@@GeneralMe100 Yep, if they’re for swing sets or something.

@michaels1326

2 жыл бұрын

@@Golfing422 dude that made me laugh out loud sitting here at a bar.

@Golfing422

2 жыл бұрын

@@michaels1326 The life expectancy can’t be high there. They dunk their hands into god knows what, probably rust remover and nobody has work clothes or shoes with exposed wires everywhere. They work in robes while around spinning flywheels. They probably dump their dead bodies in a ditch somewhere.

@annoyingbstard9407

2 жыл бұрын

They look like old whitworth nut sizes. Not a lot of meat on the nut for the stud size.

Amazing 👏 and unbelievable that it is still done like that .

@prabenR

Жыл бұрын

Its not amazing. is a tragedy.

@tomward2688

Жыл бұрын

It's what's known as a cottage industry, or perhaps better termed as a "bungalow industry," being as the word bungalow is of Indian origin, and exported into the English language back when modern-day Pakistan, Bangladesh, and India were all one and the same country - India!

This is just nuts!!!!

Nice safety sandals!!

It may seem as a primitive technology, but if our computer based society is going to collapse these guys gonna be kings for us.

@whereswaldo5740

2 жыл бұрын

You keep thinking that.

@annoyingbstard9407

2 жыл бұрын

Yes, as I’m sitting there watching our planet die my first thought will be “if only I had an 11/16” whitworth nut I could fix this.”

@MediaFilter

Жыл бұрын

Who are these morons popping out of the woodwork? Ferenc - you're absolutely correct.

@darrowfortheprosecution1404

Жыл бұрын

Don't be too happy about our demise. These "kings" as you call them ain't gonna be able to produce enough nuts to solve even one manufacturing plant in Mexico. Darrow...for the Prosecution

This looks like factories we had in the US in the 1800's where extreme labor was considered normal.

@maninthewilderness3208

2 жыл бұрын

Extreme labor now will get a company a lawsuit. US is full of softies and lawyers ready to represent them.

Need a shop like that in every neighborhood.

That's nuts!!!