For those sensitive types getting very upset about the term 'powered glider' please refer to following: en.wikipedia.org/wiki/Motor_glider RECOMMENDATION FOR YOUR FIRST RC TRAINER PLANE: bit.ly/eachineMiniWingDragon RECOMMENDATION FOR YOUR FIRST RC JET: bit.ly/eachineMiniF16Falcon RECOMMENDATION FOR YOUR FIRST VTOL: bit.ly/jjrcM02vtol RECOMMENDATION FOR YOUR FIRST HELI : bit.ly/eachineE130rcHelicopter Don't forget to subscribe for regular 'Essential RC' action using this link kzread.info

@therealevsauce

3 жыл бұрын

hi

@frogmanencountersradio5462

Жыл бұрын

How could anyone get upset LOLOLOL 💙💙

@robcat2075

Жыл бұрын

We're not *upset*, we're just doubtful about the term. A "powered" glider is rather like "canned" fresh fruit or a "pedaled" automobile.

@philipsmith1990

7 ай бұрын

A glider of any sort should spend much of its time gliding. The fact that a Boeing 747 had all of its engines shut down in flight for a while doesn't make 747s powered gliders. Apart from the landing, did your airplane glide at all?

@Choccka

23 күн бұрын

...but the shape is definetly resembling the one of a glider. I bet a 747 not flying with any of its engines at all you wouldn't call a glider aswell, would you?! By the way very cool plane! @philipsmith1990

Hi Guys, I know my english is very bad. I was very nervous and did my best. I also do not have time to study English because I have to build model airplanes 😂. I hope you still found interest in the video and can follow me to some extent what I'm trying to explain Greetings Daniel Hör

@EssentialRC

4 жыл бұрын

Hey Daniel - You English is far better than my German...which is actually non-existent! You did a great job in sharing the information about your glider. At that moment I did not really understand about the ESCs connected to the actuators on the elevator and rudder. Just fantastic. Thanks again. Dom (Essential RC)

@kwakudidii4001

4 жыл бұрын

Hi thanks for this insight on gliders. Kindly email me at nyanyoventures@gmail.com let talk.

@theinspiringengineer-scien6393

4 жыл бұрын

Thank you! :)

@Poundingsand

4 жыл бұрын

Your English is just fine (Viel besser als mein Deutsch!) - and that glider is absolutely amazing!

@sobatmissqueen5558

4 жыл бұрын

We know...

Everything from the 3D printing to that little pop up motor to the linear actuators used on the control surfaces and the 10 gram weight. That was just amazing design and build.

imagine if you showed this to the wright brothers

@mikes333

3 жыл бұрын

In that alternate reality, we would all have personal flying cars by now. ;-)

@gravypatron

3 жыл бұрын

They would have killed you for being a witch.

@mikes333

3 жыл бұрын

@@gravypatron And then they themselves would have been arrested and tried for murder since the last known case for witch trials was in 1693 and the Wright Brothers invented the airplane in 1903. It's quite more likely that they would have said, "Screw the tiny airplane buddy, please show us your time machine!!"

@SeabornNomad

3 жыл бұрын

They would hair Hoer as a God.

@diskoeric2248

3 жыл бұрын

Id imagine they wouldn’t be impressed

Absolutely beautiful ! It flies a little faster than I was expecting.

@muhammeteminoner

Жыл бұрын

It's really fast, I'm surprised 😃

@PoolIsCool_75

16 күн бұрын

no

Crank up the heated floor to add thermals.

@alpemwarrior

4 жыл бұрын

Lol

@tylerchiu7065

4 жыл бұрын

That wouldn’t... not work

@helidude3502

4 жыл бұрын

For that thing, a zippo would do.

@larryscott3982

4 жыл бұрын

I was thinking 2-3 space heaters in the middle of the floor pointed up might create a column of lift.

@rj8288

4 жыл бұрын

How about just placing an electric fan on the floor pointing straight up ? This will get you your updraft.

You know, you should get a big reflector heater and set up a thermal in that room, then you can do proper glider-ing.

Thank you so much for sharing your skills, I'm 51 years old and I am like a kid watching videos like this. I wish I had your skills of building flying model planes. Simply amazing. Don't stop building, don't stop dreaming. Thank you so much.

3:51 to see this thing flying.....

@artshirleypv

3 жыл бұрын

Thanks just wanted to see the dam thing fly.

@jonmacdonald5345

3 жыл бұрын

@@artshirleypv same!

@c.l.7525

3 жыл бұрын

Me too.

@cibarra294

3 жыл бұрын

kzread.info/dash/bejne/noF2uMytZpS1haw.html

Amazing. I've seen the ETA flying and have flown many times as P2 in Binder EB28 gliders...believe me , the wings do flex exactly like the model. Well done, great job.

@lionelvanderriet7772

3 жыл бұрын

I too have flown with Walter Binder, in South Africa, two flights of over 850 Km. The wings are so flexible that you have to be very gentle on the controls or else they get into interesting shapes!! Stalky

thats a sweet little glider for indoor fun

@Sumcant

3 жыл бұрын

Yeah cause everyone lives in a warehouse hey!

@vinayakthote3957

3 жыл бұрын

@@Sumcant 😂😂😂😂u just roasted him.

@gerard4039

3 жыл бұрын

@@Sumcant 😂😂😂😂, exactly 🤪🤪🤪

@sopanpradnya8905

3 жыл бұрын

Adit 2022. $$$x ???? 12345678910

Daniel Hor. You are next level. This was incredible. Thanks for not studying English but rather construct "micro" gliders. Love from Africa

Daniel your English is not important. What is important is your skill and craftsmanship! WOW that thing is beautiful. The system is incredible. Congratulations on building a masterful flying glider. Thanks for sharing.

Niesamowite! Świetna robota! Pięknie latający szybowiec.

Absolutely incredible. The craftsmanship is exquisite!

Fabulous! Thank you for showing us this higher aspect of indoor R/C!

FANTASTIC!! Such ingenuity in such a small package! Congrats on a superb job, Sir!!

If this young man manufacturers and markets this model he will sell thousands and thousands

@jakegarrett8109

4 жыл бұрын

Even if he made $20 profit on 1000 planes, he would need to sell several new models per year to hit regular wage in the US (maybe if he sold 3k per year, and then at $20 profit per plane he’d break even with a normal decent job, not high paying but decent). I feel like the first thousand in a batch would cost a lot of money... Probably very labor intensive and manual at this stage. Maybe he has the funds for full scale mass production and full autonomous factory, but even then it would be many years to recoup that, but that’s probably the only way to make it worth it. I could see selling the designs and 3d prints as a side hobby for a few thousand dollars, but that means it should take up no more than a couple weeks at most of effort (with my experience of 3d printing, it rarely goes to plan, some don’t come out right, and a good printer like that model probably requires is very expensive, plus you still have upkeep and maintenance just like a CNC machine, speaking of which my FDM needs it’s worn out nozzle replaced, and thankfully has a fresh set of linear bearings but the linear shafts need to be rotated for wear reasons because I don’t want to replace them just yet, and the extruder housing has worn a bit and the compression fittings on my Bowden tubes are just about shot... Yep, my car has less maintenance, and it’s the notorious rotary engine RX-8!) I’d just sell the CAD files for DIY hobbiests and maybe a high premium for a kit. Full production seems like it won’t compete in today’s market where everyone will look at this like it’s a $10 toy or compare it to an $8 capacitor powered plane and the cost of $5 in servos/actuators and expect it for $20 total (instead of $20 profit on whatever it costs). But a few dozen might buy a $100 kit, that’s just not much money though...

@speedbirdproductions5569

4 жыл бұрын

And shortly after, cheap Chinese version will pop up and bye2

@TheNefastor

4 жыл бұрын

Unlikely : you can't fly this outside, and to fly it inside you need this kind of huge hangar.

@aldogrippaldi

4 жыл бұрын

ya, but I bet Chinese small models already have actuators, example rc micro cars... awesome stuff anyway

@gustavmeyrink_2.0

4 жыл бұрын

He could just sell the files to print that thing. Not that much potential profit but zero investment or risk.

Daniel - a mate of Anton Bennings here from South Africa, I am a mega fan of your work, I have similar concepts in mind but lack your rate of production. I am busy with an A330 and a JS1 Revelation glider for micro scale and was inspired to see your work of art. Don’t ever stop

I love it. It is clear out of the range of possibilities. The response of control is very impressive. Hooray for Drones, onward and upward!

That is one hell of a well built glider i have ever seen.

So stable and smooth! And so beautiful... I love it

@unitedspacepirates9075

4 жыл бұрын

Cool but needs more jet engines and lasers maybe?

@woc144kreborn2

4 жыл бұрын

United Space Pirates you sound like a space pirate🤣

@unitedspacepirates9075

4 жыл бұрын

@@woc144kreborn2 lol, you sound like a human... No offense.

For some reason I was expecting it to be a lot slower - I know speed doesn't scale with the size of the airframe, of course, but since it looks so remarkably scale at such a small size, the speed takes you by surprise.

@saleplains

4 жыл бұрын

thats what i was thinking. glide ratio is much steeper than i expected still a beautiful model but kinda disappointed it is not floatier

@samuelyoung2671

4 жыл бұрын

Metaldirtnskin FPV Would need a larger wing chord, more lift and drag... but yeah i expected it to be slower, but it looks reasonably heavy as well so that definitley impacts the glide ratio

@johngallagher912

3 жыл бұрын

Wing is to scale which gives a high wing loading. Wing loading determines the speed range that a glider flies at. The glide ratio is not scale because of the very low Reynolds number-wing chord.

@thesoundsmith

Жыл бұрын

I kinda _expected_ it to be fast, seems like such a small chord would need speed to get lift.

the design is perfect. it flies streight forward so perfectly.

The wing flex makes it so real

@joshhayl7459

4 жыл бұрын

🔵 It IS real!!!....did you think it was a CGI?

Amazing how light and thin the wings are. Look at the flex even with only 10g weight. Good plane

That is absolutely awesome! Great Video👍🏻

Probably the nicest micro glider I've seen to date, amazing build!

Thanks for a great vid ! Your English is better than many people that live in the US these days Sir. Amazing skill and maneuverability demonstration. Keep up the great work !

That Star Wars pod racer on the table is cool.

3:51 Starts to take off 5:04 Starts to land

Amazing little model, love that little 109 on the table too!

So cool, like the flex in the wings. Awesome. 👍

With some airflow, even just a fan on the ground pointed slightly upward, this could fly inside a large room indefinitely, doing loops. Really impressive.

Amazing thrust coming from this little motor, can even take off from zero!

@alejandromedina4597

4 жыл бұрын

I noticed the same. by the sounds it makes must have a crazy amount of rpm

@biswaspratyush

4 жыл бұрын

Glider at 10 gms is light enough...

@VEJ2

2 жыл бұрын

The motors are normally used in micro quads.

przepiękne wykonanie

glider style aircraft with extremely high aspect ratio wings just look so incredible

Parfait, Quelle belle maquette !! Bravo jf

Another awesome aircraft! Essential RC you never disappoint. ❤️

So delicate! It flies beautifully! Well done!

Absolutely beautiful tiny glider, what craftsmanship 👋👋👋

That is SO cool! Great work.

Oh it’s so good to see people building scratch building planes what a gorgeous glider

Such incredible engineering! Bravo!

Very cool! Much faster than I imagined.

I have always liked rc gliders but this, this is amazing.

Very nice.I would like to see some of the others he has on that table in flight', especially the GeeBee.

@jimothyj2638

4 жыл бұрын

Seconded

Brilliant, very impressive design!

Fantastic, great skill and engineering brought together ...👍👍👍

I always dreamt about this kind of small plane! Thank you that I can see, how it flies)

Awesome glider! I love the way he setup the motor pivot. I thought for a minute that the wings were going to fold up on it but it just kept on flying ;-) Well done! See you in the Air!

Very cool! I love how graceful these microlight flyers are indoors.

Phantastisch! Tolle Arbeit!

Fantastic Picasso of Depron Daniel Hör very nice Video Dom, thumbs up.

Thats awesome!!

@EssentialRC

4 жыл бұрын

Yup. I thought so too. Just one of many unique scratch built models displayed by the DMFV Indoor Team at this event. Cheers Dom (Essential RC)

Awesome! Nice work, Daniel.

so simple yet so elegant.

BEAUTIFUL, THAT IS SOME GOOD FLYING! Thanks for the vlog and sharing.

Great Video!

@sahabataeromodellingindone86

3 жыл бұрын

WaW

Totally amazing!

That's incredible. So elegant.

Now that's one hell of a high aspect ratio!

STUNNING!

Awesome! Well done Daniel!

Gee's How Tiny is that little beast , if he got a thermal with that it would never come down lol, great to see such builds and engineering techs, thanks for sharing Dom great Video

that is amazing creation​.

Very elegant. Thanks for sharing

So surprised ... it's so light and takes off right from ground ... great !

A spectacular effort by this young man. Nice to see some talented young blood in what is more often an Old Fart's hobby.

@joewoodchuck3824

4 жыл бұрын

You just called me an old fart. I would rather references to me be known as mature flatulence. :-)

@theoztreecrasher2647

4 жыл бұрын

@@joewoodchuck3824 LOL. Aged in the barrel like me? ;-)

@joewoodchuck3824

4 жыл бұрын

@@theoztreecrasher2647 In the barrel, over the barrel. I think that's how the word flatlander came to be. Flatulence out on the land. Maybe not. And it's no longer SHTF. It's now a Fecal Blizzard.

@aviation0088

4 жыл бұрын

I’m 11 and I fly in rc airshows

@loganreuter6072

4 жыл бұрын

I don’t remember asking Jk that’s pretty awesome

What a great glider and what an impressive tiny motor! No thermals, ha ha!

Superb! And amazing big wingspan for that weight!

The model is beautiful in appearance and performance.

MUITO BOM PLANADOR, VERY GOOD AIRPLANER, FROM BRASIL.

Amazing skill, id like to see the construction also good camera work

Great work! Amazingly maneuverable!

That CORSAIR flies beautifully, it has retractable landing gears and flaps,NICE!!!!!!!!!!!!!

Where can i buy this

That’s quite impressive. Could it be used outside being that light or would it just get swept away? I’ve had other small models that weren’t great outdoors but maybe the glider form factor is different?

@itouchipods

Жыл бұрын

Jeeze good point i bet you could keep that thing in the air for hours if you knew what you where doing!

Smooth and amazing flying

Wie immer eine sehr feine und geile Geschichte von Daniel, mega!

@jackdiamondsa4298

4 жыл бұрын

Christian Pilz , ja richtig

Wow...beautiful. I see people rising up with the power of cad and 3D printers.

I want to see that corsair in the background fly indoors too lol

@GodzHammer

4 жыл бұрын

Gyr_FPV I kept saying the same thing until I realized I wanted to see every craft on the table fly.

@methuso

4 жыл бұрын

kzread.info/dash/bejne/Z3ab0s6BaKrUfLA.html

@Max.Mustermann.

4 жыл бұрын

kzread.info/dash/bejne/mZqumdepec2nZZM.html ;) same location ;)

@SP-nt4sr

4 жыл бұрын

kzread.info/dash/bejne/mZqumdepec2nZZM.html

@michaelbrownlee9497

4 жыл бұрын

Its on youtube, really nice model.

Excellent airmanship!!!

Beautiful work ,Daniel....sehr schon!

This is your daily dose of Recommendation Amazing Stick slim 3d printed RC plane

If these were commercially available I'm sure they would sell.

Hallo Daniel, sauber! Sehr geil, absolut genial gemacht! Triple Respekt👍👍👍

Elegant! Well done!

A mouse with little goggles on had gotta be next on his optional additions list for this awesomeness 😆

"Powered glider" isn't that just an airplane? Correct me if im wrong but doesnt a glider glide?

@seabreezecoffeeroasters7994

3 жыл бұрын

You are wrong ;) IRL or even in R/C the motor is used to climb to height then is shut off. In R/C outdoor types you then go chase a thermal or ridge lift and keep going without the motor.

@joejoejoejoejoejoe4391

3 жыл бұрын

It seems to have a glide ratio of about 4:1 so it needs a motor.

@seabreezecoffeeroasters7994

3 жыл бұрын

@@joejoejoejoejoejoe4391 I have slightly larger gliders that will handle outdoor use. Generally 2-8 knots of wind looking at the speed it should do 'ok' in similar conditions without the motor. Low Reynolds numbers on the really narrow chord won't help either.

@AZCaveMan480

3 жыл бұрын

@@seabreezecoffeeroasters7994 the engine never turned off. It did not glide

@seabreezecoffeeroasters7994

3 жыл бұрын

@@AZCaveMan480 He did for a few seconds. Look at the roof height and have some understanding of the Aerodynamics of this sort of glider and the space he was working in a decent job of flying it best case unpowered time in the air might be 5-6 seconds in that space as you are always turning which kills the glide.

Incredible, well done a master builder & flyer at work:-)

Absolutely wonderful!

when do we get to some action? 3:50

@ahmedbouachir9409

4 жыл бұрын

ببييب

My teeth hurt after watching this... the motor sounds like a dentist drill lol

@hennarkilsen1389

4 жыл бұрын

Pavia 1525 you seem to have a very bad dentist, if he makes your teeth hurt...

@krokodyl1927

4 жыл бұрын

Pavia 1525 LOL

@mrkalerkunder1076

3 жыл бұрын

Savage!

@mahfoozalam1866

3 жыл бұрын

Matlab tumhara teeth sada hua hai

@sickmyduck1738

3 жыл бұрын

lmao

Amazing ... Bravo Well Done Thanks for sharing

Sehr gute Technik! Danke!

It’s available for buy ? Just awesome

@austins.3313

4 жыл бұрын

nope he said he 3d printed it.

@JohnWhite84

4 жыл бұрын

@@austins.3313 if I'm not mistaken he said he 3d printed the mold then vacuum formed.

3:50 flight start

@phoenixscott001

4 жыл бұрын

Mark serjant thank u

Very cool buddy this is the first time I have ever seen a glider this size good job, ❤️❤️❤️

Watching people fly RC stuff has a special satisfaction