Very nice Pakistani Engineering Skills. The Tractor is also Local Pakistani Tractor Millat Tractor. Everything is made in Pakistan, in this video. God Bless Pakistan and its hard working people.

To big for this Tractor!!!!

It barely can pick up it’s own weight that’s a bad accident waiting to happen

Am I the only one that saw the welding on that thing? That thing's a death trap waiting to happen.

@daneenmurf1043

Жыл бұрын

I reckon the counterweight will let go first

@andycurran3327

Жыл бұрын

A whole lot of scary for one tractor, glad they put a roll cage on. No brakes once those back wheels are off the ground.

@daneenmurf1043

Жыл бұрын

@@andycurran3327 One bloke on his own was able to lift the ROPS. Thats the internationally approved test to prove its strong enough to protect the driver

@andycurran3327

Жыл бұрын

Seatbelts still a thing for tractors? I think I know why they started with a new frontend/wheels. Is there a 4x4 option for this tractor? That one guy is going to find out why you don't drive around with the bucket in the air.

@daneenmurf1043

Жыл бұрын

@@andycurran3327 seatbelts werent fitted to tractors of that era. Modern tractors have them ( but they are very rarely used ). As to 4wd, i suppose the cost is a factor

Just because you can build it, doesn’t mean you should. Unless the normally accepted laws of physics don’t apply where they are, that’s one scary creation.

@richardbarber4444

10 ай бұрын

They have to learn and will once it is field tested. Life is all about balance!

@KING-FU

10 ай бұрын

@@richardbarber4444 Or in this case… “counterbalance, lateral balance and other basic principles of load stability”, or a proper ratio of all.

Vocês são verdadeiros artistas da mecânica , Parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷

Wonderful Skill and Technical Work, carried out in sequence and proper Planning. My Most Respected Salute to all these workers participating in manufacturing the Grapple. Thanks a Lot for Video.

не завидую тому трактористу который почувствует на себе разрыв шланга(не дай бог) и обдаст сртуёй масла, а бывает и шланг прилетает

@user-oz1ed4ed5o

9 ай бұрын

То же хотел написать это. Гидробак с нагретой маслом за спиной распределитель перед лицом, шланги .

This Crew's Main Motto IS "Just don't Force IT ,USE A BIGGER HAMMER!!! They would STILL be Scraching their Heads IF it wasent for ALL the HAMMERS Laying Around. An 1/8 of an ounce of Grease was used " liberly" for the Toughest Assembly Procedures & EXTREAM longevity of this "Build" that will "maybe LAST 6 miniutes & 42 seconds..... all those parts are "Hammer fatigued " & the Whole Rig is EXTREMELY OVER LEVERAGED.

It would have been nice to see it in use doing what speciality it was designed for.

What a wonderful design, It's brilliant!!!

When one of those hydraulic lines blow is going to be bad day for the operator.

What an utterly ridiculous contraption.

Awesome Job, with the given working conditions , its a lil rough here and there , but still a wonderfull piece of equiptment , i see there are some people condemning their work , the thing is if the critics had to do that job, in that conditions with their tools , will you be able to do it better than them, im a boat builder welder etc , they got room for improvement yes, but i have to give them Credit, awesome jobs Gentlemen , keep the Good work up , God bless you all. and may you all end up with a immaculate factory with state of the art machinery to expand you skills and business,

@grahamcifuentes4451

9 ай бұрын

Methinks they might be insulted if your god blessed them! To them, it's allah all the way!

Esses caras são fera parabens.

ماشاءاللہ جی اللہ تعالیٰ آپ کو سلامت رکھے

For Honorable to chairman sir of Millat Tractors pick that old man for our company millat tractor in project department it's very useful for our company

There is a huge potential of investment. They have skilled and cheap low wage workforce but lack a industrial structure and exposure to international customer. Any investor from west can do it very easily.

@flashgarage

9 ай бұрын

Нахер это говно в цивилизованный мир тащить

Using a pipe wrench in a shop is garbage. You guys gave the capabilities of making an entire front end loader but cant make a wrench from high tensile flat stock?

Ottimo lavoro 👍👏👏👏🖐️🇮🇪

Все сделанно отлично! Но есть минус. Ковш не копирует своё положение при поднятий стрелы.

@flashgarage

9 ай бұрын

Вы нормальный? Какой нахуй отлично? Они одной этой халабудой уже перегрузили трактор, он развалится от такой работы

EXCELENTE 👏👏👏👏👏

Way to far out will cause a balance issue they will need lots of weight in the rear

Un excellent travail 👍👍👍👍👍👍👍👍

This is a great Machine. To all the pessimists, posting negative comments, what do you gain from it. The machine will work and these machine work all over Pakistan. The Tractors are used in many heavy construction related jobs all over Pakistan, not just on Farms, but road construction, building construction sites, and other heavy duty work, and these tractor work superbly, and on a tight budget.

They went over the capacity of the tractor when they added the boom without the bucket. Lol

Oh my God,what an constaction....the Loader is heavyiest as the tractor ...

@amazingskillsdiscover117

4 ай бұрын

Thank you for your response 💫

What a stupid machine. Even with its length, it's height is still determined by the length of the hydraulic rams... the even ' upgraded" the front tyres to put in bigger bearings. This is a stupid implement.

Excellent and amazing skill.... Un excellent travail .

As always they use to overload everything! Poor little tractor engine.... his life will be so short!

@guyward5137

9 ай бұрын

They do the same with trucks. Take a one ton truck and put ten ton springs under it and load it with 20 tons of cargo

Excellent and amazing skill...

At first I thought this was in India but then I noticed that for every 1 guy working there were 2 standing around smoking then I knew for sure these were state workers from Minnesota

@amazingskillsdiscover117

Жыл бұрын

Your observation was good James Pupkin❤🥂

@amazingskillsdiscover117

Жыл бұрын

So please stay connected with us 🙏

this tractor will not live long with this arm in front. But hey , I went to school for this .

love alvin and the chipmonks with a 50 year old tractor

Why so long and far away from the front of the tractor? That's gonna take a lot of counter weight lol

@MrFakit

Жыл бұрын

They'll need another tractor as a counterweight

@chaseledbetter5186

Жыл бұрын

@@MrFakit hahah yeah for real

@billabong9215

Жыл бұрын

Because they have no idea what they are doing. Loader will ruin the tractor. Front bearings won't last a year.

@chaseledbetter5186

Жыл бұрын

@@billabong9215 yeah they put bigger, heavier tires on the front but the front axle is still rated the same lol.

@iveykennedyyy5250

Жыл бұрын

Way too much work for hydraulics all that they had to do it tap into the external hydraulic system

Looks pretty crude to me. USED pump, crappy welds ,used hoses, welded fittings, A death trap.

Der Frontlader ist sehr gut gebaut nur zu überdimensioniert für den Traktor.

Bonjour super belle vidéo et bien expliqué bonne continuation à vous tous René

Why is it so long..

😊Dessa maquina vi construirem o eixo dianteiro. Não tinha entendido o porque trocar, agora ficou claro❤ Vi construirem os pistons😊 as rodas. Não vi construir essas peças vermelhas e a garra dianteira😔 Mas já vou procurar os vodeos delas, gosto muito de ver voces construirem as coisas😊❤😊

I would like to have a set of those front tires though they look cool

Maaşallah. Gres control.

I’m all for working with what you got, but you’ve got to throw in some common sense with the ingenuity.

ماشاءالله تبارك الله عمل عظيم وممتاز

Pretty darn nicely done looks right for what it was built for work.

@lotarzi1

9 ай бұрын

Und ☠ das alles in der Sandgrube . Gericht

Гигантский кун😮

No greasers at the end of the rams? How are they lubricated.

I guess they know what they doing, the loader that filled the counterweight was done by them too. On a MF tractor also

Çok güzel olmuş tebrik ediyorum fiyatı ne kadar

Very nice video

What are those front axle hubs from? anyone recognise them. some type of truck maybe? good job on the build nonetheless.

The tractors frontaxel will be like arrievedishie

@billabong9215

Жыл бұрын

Arrivederche... you were close though... like these guys attempts to put a suitable loader on that tractor.

Ładowacz połowę wagi traktora 😮 ten traktor na pół się rozleci

@giorgiobassi9078

11 ай бұрын

Si. Troppo. Peso.... 🇮🇹🥴👀

@D-cki

10 ай бұрын

Hindusy to stan umysłu. Znajomy miał jakiś polski ładowacz zakupiony, ale siadł mu ciągnik całkiem i kupił john deere z quickiem... gość zachwycony jaki przeskok technologiczny, korytuje na całego, ciągnik ma lekko. A polski ładowacz i pierwsze ładowanie gnoju skończył się pierwszymi pęknięciami ramy...

Easy to be a critic of their work I guess - but its all they know & business looks busy for them........ be great to introduce them to the metric hydraulic steel tube system with the slide on olive compression & some parallel thread nipples with the sealing rings for the valve bank instead of the tapered thread with thread tape

@BuenaProa1966

10 ай бұрын

Joder y de paso decirles que esa pala es para un Massey Ferguson de 305 cv y no para ese carretillo.

Buen trabajo. Sólo hay una cosa que no me gusto y es la manga que pasa por la goma( llanta) trasera.

Who needs an engineer? 😅

Mi sembra un tantino grande per il mezzo

looks good except there is no filter in fydraulic return line...

Зачем стрела огромная и грамоская😂

Why so long? The operator can't see nothing behind with that weight full of gravel. Anyway hard workers this guys

Еще сзади можно ковш сделать будет JCB или Volvo.

❤❤❤

I thing the arm long.when it pick heavy load it will tilt bac tyre

This is a pure example of how to destroy a tractor

Why did you put that big bucket on the back of the motron? Wasn't there a smaller one so that the man wouldn't be able to see what was behind him when he was reversing?

Big banana loader, great job

@BuenaProa1966

10 ай бұрын

dentro de 4 dias ese Massey Ferguson estara APLATANADO

I've fitted a lot of loaders in my time (quickie trima etc) this reminds me of some of the loaders that were around 40 years ago. that MF was never made to take that kind of load the weight on the rear axles alone will kill that tractor oh and not a lot of greasing points either,well buisness looks good so some one is making some cash from this.

What in the love of gobs name is that mess of a thing

السلام علیکم بھائی ابھی اس کی ٹوٹل کتنی پرائس بن جاتی ہے خود ادمی تیار کروائے گا تیار کیا ہوا لے کتنے کا ٹریکٹر سمیت پورا

Я так розумію це все самі виготовили?

@amazingskillsdiscover117

Жыл бұрын

Yes dear in some days I upload complete manufacturing

Hello

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Die Hydraulik Leitung neben das Hinterrad legen ist auch nicht super

Стрела слишком длинная

ماشا اللہ تبارک اللہ بہت خوب جناب آپ سب سے گزارش ہے کہ پلیز فرنٹ بلیڈ تو آپ نے تیار کر لیا ہے اب ٹریکٹر کے پیچھے والے.. یعنی بیک ہوی اکسیویٹر بھی تیار کریں تاکہ سب لوگوں کو فائدہ ہو خاص کر فیٹ ٹریکٹر 480 کے پیچھے والی بیک ہوی جزاک اللہ خیر 🙏

All pipes oblique and all cupplinngs dry tighten 😅

Messi itany joga ha ni jitna Saman fit ho raya ha...

Very good work

@amazingskillsdiscover117

Жыл бұрын

Dream weaver❣🥂

The most Over sized loader i ever sen!! 😂

Genial pero cual es la relación de peso entre tractor y todo el aditamento que le pusieron? Pregunta .

@PatricioGarcia1973

11 ай бұрын

Un montón

@anamariadefatimacaicedo2519

11 ай бұрын

Señor Patricio Un automóvil 🚗 topolino con un motor de f1 . Sin ofender a los ideales del tractor 🚜

What is this to be used for?

@allnewsm9285

11 ай бұрын

For soil loading

Для этого трактора слышком тяжолый

Они явно больные, и не лечаться. Поставить на этого малыша кун, который весит в 2 раза больше самого трактора

Para ese Massey Ferguson esa pala es un aburrada ese tractor es muy pequeño para todo el peso que le han metido en vacío luego carga la pala mas la fuerza de trabajo que ejerce para cargar, esa pala es mas bien para el Massey Ferguson de 305 cv. Dentro de cuatro dias ese tractor estará reventado. Referente a la construcción de la pala pues es un trabajo EXCELENTE

@flashgarage

9 ай бұрын

Ну хоть кто то есть адекватный)))

What type of work is going to be used for?

@johnnyflat2138

Жыл бұрын

Lifting feathers I hope

@allnewsm9285

11 ай бұрын

Soil loading same like wheel loader

what`s the SWL on this unit its so nice to have hydraulic pipe's in your face as your sitting in the seat 💀

there will be a train with more effort😂

Ну и погрузчик. Наверное лес грузить

@user-np3pw5gk3s

10 ай бұрын

Это оборудование тяжелее трактора, сзади нужен противовес

Трактор бедолага...

Wow not skilled enough that is way to big for that machine and to far out from the tractor dont think there was much engineering involved but it looks good lol

Browns buzzard 19:48

That would be good for about 40 kilos, why so far away?

@PAI93

Жыл бұрын

For reach. You put weights on the back, Einstein

@Bigsoot7393

Жыл бұрын

@@PAI93 clearly you haven't driven any tractors, all the weight is already at the front you would need a huuuuuuuuge counterweight to be able to lift anything with that probably around 1 tonne or more and that old Massey would snap in half

@PAI93

Жыл бұрын

@@Bigsoot7393 ooooo, 1 tonne, how unfathomably enormous 🙄. Looks like the frame they built would take most of the strain. I wouldn't assume many people in this comment section lacks tractor driving experience. Three of my tractors have front loaders. The loader with about the reach of the one in the video, does indeed sit on a bigger tractor. That's because I work with silage, not hay, I like to do quick jobs without putting on a counterweight, my land is hilly And CRUCIALLY: that size tractor is available and affordable to me.

@Bigsoot7393

Жыл бұрын

@@PAI93 yes the frame might take one tonne but the tractor won't

@PAI93

Жыл бұрын

@@Bigsoot7393 what part?

lavoro pessimo

Kompletter Unsinn. DAS sind Murxer, viel Farbe soll schlechte Schweißnähte überdecken. MÖCHTE mal wissen welche Hubkraft der noch hat, dann hat der Schlepper nicht mal Allrad!

ہیلو سر کیا آپ فیسبک سے کمائ چاہتے ہے ؟ اگر آپ چاہتے ہے کہ فیسبک سے آپ کی کمائ ہو تو 50/50 پر کام کرتے ہے اور سارا کام میں صرف آپ کی وڈیوز ہوگی کیوں میں فیسبک پر وڈیوز واِئرل کرنا جانتاہوں ۔اور آپ یوٹیوب سے بھی زیادہ کماوں گے

@amazingskillsdiscover117

Жыл бұрын

Your Whtsapp

Bravo colleagues, cool video

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤏🤏🤏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Peace of crap...super long. Front bearings will be dead soon.. rear counterweight (dont want to mention). Huge impovisation...

BRAVO BRAVO ....VERY GOOD MECHANICER

Bravo