The damage on the leather...

@MrIgottap

7 ай бұрын

There’s a work-around for that if you’re worried about appearances. It’s a pretty good machine for about a hundred bucks and offers a stepping stone for someone interested in starting a hobby or doing basic repairs without breaking the bank.

@Chungustav

5 ай бұрын

It was originally for shoes for that to be expected

@gabrielh5937

3 ай бұрын

Just ne3d to file the foot

@t3kado634

3 ай бұрын

​@MrIgottap or you can get a 7$ file and file it down than use 1200 grit sandpaper and ya done.

Also, it's marking the leather, take some sand paper to the bottom of the walking foot as it's to sharp

Hand cranked walking foot. Nice! Also good for denim and canvas.

If you use a small file even one for your finger nails on the bottom of your foot you’ll help with the marks it’s leaving. A lot of us to use the little plastic deal you use when fusing two wires together and you put a little shrink tune around the splice.. put one of those and melt it barley to get tight. Some folks I know have even cut little pieces of runner and glued them to the bottom of the feet. If you don’t do some kind of mod like that you’ll always have that range but very easy to fix. Do t put a motor on it. Most of those are for show and cause way more problems. If you can’t use a bigger needle that you want you yourself have to actually bore out where the needle goes to except a larger one there’s videos on the tube! You just have to make your set screw work and reset your timing and it will work just the same but you can even run fishing lie through it.. trust me on this one. I was one of the first when they started selling them.. good luck and God bless

Seen a ton of videos just like this but nobody post anything they have actually made with one just simple stuff

@steveman6789

7 ай бұрын

I've done some purses and other things with mine. I was going to post a picture, but it won't seem to let me. It's not perfect, but I've seen really nice stuff made with this machine.

Very cool.

I filed the bottom edge of the bobbin case rounded and smooth to help thread slip around the case.

Это швейная машинка Версаль для кожевенных изделий😊

Fantastic ❤❤

Wry nice.. what size needle are you using? Did you do the modifications for a bigger needle or is that the standard size one that it takes? Very smooth..!

Nice 👍

I have so many questions how did you get thread to work in yours my thread breaks every time

@BillyClark_TheDigitalAvatar

6 ай бұрын

I found a bunch of videos talking about how to properly calibrate the machine. There are several things you need to adjust if the top thread is breaking. There's this one guy with an eye patch, he 100% got me going. Cannot remember his name, too tired to look him up

@jameslong654

6 ай бұрын

@@BillyClark_TheDigitalAvatar thank you for the information

Where you get this from

That foot is amazing! Could it be used on any other fabrics?

@illtryanything5264

8 ай бұрын

yes, and you can tenderize steaks with it

Only problem I have with mind is the thread won’t pull up from the bobbin so I can start sewing and I’ve tried EVERYTHING to get the thread up, thoughts?

@steveman6789

7 ай бұрын

The timing could be off. You could also have the needle in backwards or it could be the needle depth. I would start by checking the needle and then the depth. I think there is at least one video dealing with timing issues. The thread has to form a bit of a loop for the bobbin carrier to catch it.

I bought this machine is it good and effective

@neemabatraham1073

6 ай бұрын

How much you bought and from where pls!!

@aiisaouihakim-5558

6 ай бұрын

@@neemabatraham1073 about 200 dollars in algeria

Hello, I❤ it!!! I need one asaime!! Can you send me a link , to buy it, please🙏🙏🙏!!

File it down 1200 grit than 3200 grit wet you are done.

Looks like that walking foot is really chewing up that leather. It seems handy, no doubt, but would result in an ugly final product.

@emilclaudell

Жыл бұрын

A lot of people choose to do some work on the machines and most wind up filing down the foot, and/ or putting some sort of dampener on it. It's quite easy, and gets to be very good after that :)

@barbarabridgetbensah9601

Жыл бұрын

The product I see looks good . I guess it would depend on who's working with the machine 😇

Do you have any videos on the exact specs of your machine? I got mine and have been watching every video known to man about it but absolutely can’t get it to work

@LuisOntiverosv

Жыл бұрын

Had the same issue, now its working fine😄, it does snap your thread??

@steveman6789

7 ай бұрын

What is it doing? What thread are you using? What are you trying to sew? I might be able to help, but I need more info. I get upset when someone hasn't even watched videos, but I can understand not finding the answers.

@jameslong654

7 ай бұрын

@@steveman6789mine breaks every time I try to sew

Ye kaha ka machine hy hame aapka add mil sakta hy kyya

Price

What type of thread is this mine seems to not be it 😞

@steveman6789

7 ай бұрын

I'm not sure what he's using. It could be the wax stuff. That's not good as it clogs the needle. The best is bonded nylon. You can get it in different thicknesses, but you have to get the right needle too.

When you want every stich to look like a Frankenstein corpse.

That doesn't look like you're making shorts...

@MorleyKert

2 жыл бұрын

You mean you don’t have heavy duty leather shorts? Weird.

@TangoCharlieAlpha

Жыл бұрын

​@@MorleyKert ......or DOES he? 🧐😄

@MrIgottap

7 ай бұрын

Taking orders now

Kitne ki hai

What do you use to clean up the scuff makes from the foot ?

@RealYurNext

Жыл бұрын

I grinder the teeth off mine, seems to still be feeding fine

@JelilatAdesiyan

Жыл бұрын

Or spray some plasti dip

wtf was at the end... :D

Mean it does the job, but it tears up the leather...

How much for a machine like this

@AmericanAdrenaline

8 ай бұрын

$100 google Beamnova leather cobbler. I came from amazon to look this up.

@steveman6789

7 ай бұрын

I paid $140 for mine, but it has bearings for the addition of a motor later.

Tenho uma maquina fessa mas nao costura o que faço preciso de ajuda

@steveman6789

7 ай бұрын

There are videos on KZread, but they're mostly English. It would be very hard for me to help you.

Mashna ka praisa

I have this piece of shit sewing machine. Wish I had yours. Mine tears the thread if i go through leather for some reason. Any its not as smooth as yours.

@steveman6789

7 ай бұрын

What kind of thread are you using? Have you lubed it? I use bicycle chain grease and regular sewing machine oil.

Don’t buy that machine

@MorleyKert

2 жыл бұрын

Why not?

@barbarabridgetbensah9601

Жыл бұрын

yes,why not?

@dujuanmorris8591

11 ай бұрын

Bought one ended up throwing it away 😂

@steveman6789

7 ай бұрын

Correction! Don't buy this if you don't have any patience and the ability to fix simple machines. This thing was designed in the latter part of the 1800s and it does work, but it doesn't usually work perfect out of the box.

@MrIgottap

7 ай бұрын

@@steveman6789it’s not hard to tell that this machine is not for everyone. It’s a shame that it gets such a bad rap due to a lack of patience, research, or just general mechanical understanding. I have ordered one for myself but only after watching and reading up on it as much as I can. I’m sure it’ll be a bit of a pain to get it up and running and have some quirks along the way, that’s half the fun. I’m not expecting to make a living off of it, what do folks expect from a hundred dollar piece of “Chinese-ium”?

Me podrían informar como puedo conseguir las bovinas d está máquina ya que tengo una pero arme quebró el tensador d la vovina