If you like the video, please introduce it to your friends and social media !

@1islam1

Ай бұрын

幸せな人生をお祈りします……ありがとう 🔴ムスリムは創造主である唯一の真の神へ従う者だ 🔵我々は唯一の御方、創造主、真実の神（アッラー）のみを崇拝しなければならない。 🔴者を援助、食物を与え、支えるように勧めている。 🔵イスラームは、人種や肌の色や国籍に関わらず全ての人間は平等であると教えている。 🔴イスラームとは唯一の真の神であり創造主へと従うという意味だ。 🔵ムハンマドは40歳になった時に、天使ガブリエルを通じて啓示を受けた。 🔴預言者ムハンマドは述べた。「もし、ある男がイエスを信じ、私（ムハンマド）を信じるなら、彼は二倍の報酬を得るだろう。」 🔵イスラームは私達の両親と高齢者を敬い、気に掛けるように命じている。 🔴彼は人種、肌の色または国籍に関わらず全ての人間は平等であると言う。 🔵し主の許しを乞うこと。己を愛するように人を愛すこと。 🔴全体を異教と偶像崇拝から、唯一の神（アッラー）へのタウヒードと従順へと変えた 🔵イスラームは弱者、貧者、困窮者や障がい者を援助、食物を与え、支えるように訴えている。

That last step greatly improved the product overall...brilliant work and thanks for the idea!

ホームセンターで購入可能な物で、しかもDIYで作れる物。 すごい👍

So the last one has the least parts and works the best! Excellent solution and should be the most reliable too.

I liked the upgrade to your original sandblaster cabinet from two years ago, this is way more efficient and works just as well. Thank you for this compilation! 👍💪✌

サンドブラスターのキャビネットを木製で制作すると言う発想は無かった。・・・ 素晴らしい。

@jisakukobo

Ай бұрын

耐久性に疑問がありましたが、作ってみたら全然問題なく使えました。

Great work. I really liked seeing you go through several versions before discovering what worked the best!!

Thank you for your efforts to save others time and effort because there are steps you can back out of if they aren't enough without losing either time or money spent unnecessarily - and that's because you did the groundwork!

*YOU'RE MADE IN JAPAN, SO YOU'RE A GENIOUS!* *あなたのチャンネル登録者が1000万人になることを願っています* مزيداً من التوفيق و التألق و النجاح و تحياتي من كولونيا

I always love your attention to details in over engineering things to perfection...

私も工作や分解とか好きなので 偶然出てきたので観てましたが ふと動画で手先の作業を見てると 何気に手指が綺麗なのに気付きました。

@jisakukobo

Ай бұрын

コメントありがとうございます。 手は昔から荒れないので、皮膚は丈夫なんだと思います。

Nicely done. For years I made my living as a glass artist and did a great deal of sandblasting. For most work I used a pressure pot system as it uses a lot less air to deliver more sand. The syphon system has its place as well but uses a lot of air to deliver a smaller amount of sand. With adequate air delivery it can do a wonderful job. When I first started I was using a 20 hp Quincy compressor and later a 15 hp Quincy. For most work I found that a 10 hp or two 5 hp compressors could keep up with the needed supply. Anything less I would have to spend more time waiting for the compressor to catch up than actual sandblasting. My last project was a 6 foot square bathroom window. I had to do it on site with a single 5 hp compressor and a syphon gun. What would have been a 40 minute job with a bigger compressor and a pressure pot took me nearly 3 hours. Much of which was waiting on the compressor to recharge.

凄い！もはや業務用 工作精度がハンパないですね！ 尊敬します！

@jisakukobo

Ай бұрын

ご視聴ありがとうございます

Na minha opinião o projeto número 4 foi o melhor um grande abraço pra você!

The various methods you tried and the issues with each was interesting to watch, thanks for taking the time to experiment and share with us ... your final method of the tube running down into the sand collection area is exactly how I did it 👍.......... but I feel that you went through all of that to end up with basically a bog standard sand blasting gun with replaceable ceramic nozzles, with air coming in one tube and the sand coming in another!

Não tenho nem palavras pra descrever quão magnífico são seus trabalhos meu irmão!! Um salve a você aqui do Brasil 🇧🇷🇧🇷

Você é incrível. Um abraço do Brasil

素晴らしいノズルアタッチメント❤ ラストはノズルも軽くなってホースの劣化も最小限で素晴らしい DIYは工具からですね

@jisakukobo

Ай бұрын

ホームセンターで手に入る部品だけでこの仕組みを実現できたのが良かったです。 サンドブラスターが必要な時に是非参考にしてください。

@muatasem-almusike

Ай бұрын

استخدمت نظام السيفون ، ونظام وعاء الضغط ، وكلاهما جربتهما بضغط الماء تارة والهواء تارة أخرى ، وذلك في تنظيف اسفل السيارة من الصدأ وكانت عملية متعبة لأن الصدأ كان شديد ، تجربة ضغط الهواء سهلة ومريحة، أما بضغط الماء كانت أقوى وتجعل السطح ناعم ولكن تستهلك مواد أكثر وتخلق جوّاً مزعجاً كأنك تعمل تحت المطر، اشكرك على المحتوى الرائع.

Perfect, as always!

Sir your work is done very well and neatly

Amazing. Very good work ❤

Great installment. Thank you.

One better than the other! Amazing!

Excellent 👍 la dernière version est toujours aussi ingénieuse 👏

Nice build

Cada vídeo que veo me parece mejor, gracias y un saludo desde México!!!

Wow I remember watching your diy sandblasting enclosure years ago. It's amazing you still have ways to improve it.

最後の砂を吸い込みながら排出する？仕組み、そういう原理に疎くてあまり理解はできてないのですが砂を移す手間が減るアイデアとても良いと思いました😊

I am very impressed by the amount of projects you made and every single one are outstanding, it is a pleasure to watch your videos

The last one is very nice

Hast du wieder ganz toll gemacht, vielen Dank für die Anregung.

Hola muy útil y bonitas ideas me encantaron, bendiciones.😊

Stunningly Brilliant as per usual, I loved every minute of that.

@jisakukobo

Ай бұрын

I appreciate your comments.

はぇ～賢い って思って調べたらサンドブラストの一般的な仕組みだって知れた なるほど最初に考えた人はすごいな

Nice finale.

Fantastic! Just what I have been looking for. Thanks. What pressures are you using? And what size of compressor? Does the blaster work for different types of granulate (like walnut shells)?

You sir, are an absolute genius.

Seeing the handles you have, I fitted a 3/8" (~10mm) drill chuck into a large dowel, finding it very useful. Was the last piece you blasted hot rolled with mill scale? Whatever it was it cleaned up quick.

Amazing technology

Super, Japanese craftsmanship👍

@jisakukobo

Ай бұрын

thanks

The ventouri nozzle is my favorite. :)

thank you sir for sharing, good job !

Excellent video.

Me gustó mucho la idea.

@jisakukobo

Ай бұрын

Thanks

Question: The 4th nozzle you build and use the sand at the bottom "as an endless supply of sand", how are you managing the air supply cable into your box? Do you have a picture of that? Great video compilation. Thank you for posting.

@jisakukobo

Ай бұрын

It is operated with a foot pedal. For more details, please see the other videos in the video summary section.

nice tool to have in your workshop

Comme toujours,....excellent!

You’re amazing~~~~~🎉

yeah, your idea is very good, I especially like it.

Very Nice! Makes me want to make one now…. If only I had a shop….

i very much like your videos and your 'style' of presenting information.

Check the plans are in English to buy them or do you have any software to help me execute them? Excellent work 🇨🇱

The last one is just perfect

For softer materials, like wood, you can use ground up walnut shells which are softer, but will still achieve the same result with less pitting.

随分前なので現物は有りませんが、４ミリ位の六角ボルトの中心に２ミリの穴を空けて右に取り付け エアーをボルトに吹き込み左のカプラのオスから出す、ボルトの頭がT字の中心にあると負圧が 下に掛かると成功ですが、ボルトなので前後させると適正な位置を確認出来ます。 目が細かいサラサラした砂であれば使用可能なので買う必要も有りません。 砂を入れるタンクは負圧が掛かるので適当な位置に穴を空けてホースで負圧を抜く必要が有ります。 自然の砂だと回収する必要はありませんからブースは必要無いかと・・・・・ 河川や海岸の砂を細かいふるいに掛ければ無限にありますから、

@jisakukobo

Ай бұрын

詳細に説明していただきありがとうございます。 ここまで詳細に説明していただいたので実際に機能したのは事実だと思うのですが、だからこそ現物を見たかったのです。 残念ながら私の想像力不足で、その作り方だと原理的に負圧にならない感じなんですよ。 砂を入れるタンクに穴を開けるという点も疑問です。 適当な容器に砂を入れ、その中に負圧用のホースでも突っ込めば良いと考えているのですが・・・ わざわざ穴を開けなければならないような気密状態にする利点は何なのか非常に興味があります。 説明から想像すると、どちらかというと自由落下式のサンドブラスターになってしまうんです。 申し訳ございません。

@johnsmith-to4ro

Ай бұрын

@@jisakukobo ちょっと完成物に対する拘り強すぎませんか？

Amigo, qual o tamanho mínimo do compressor para esse primeiro projeto? Esse material é areia mesmo ou é outro tipo de material? Friend, what is the minimum compressor size for this first project? Is this material really sand or is it another type of material?

This is great. Could you split this video into 4 chapters?

先生、砂の保管箱に穴を開けて透明アクリルで仕上げて、砂の残量を確認できればと思います。 いつもよく見ています。

Ok, fantástica recopilación maestro,buenas chorreadoras, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecido like desde Narón (Galicia)👍🤓😜

Nice build i want to make one now 😅 I think i have all the wood just not the small tube and the equal tee and pipe And i really cudnt careless about the gloves 😂

9:10 nice jig, only one clamp needed

May I know the hand tools that you use. It's seems great to have one.

Excellent

18:24 Nice tools! But I don't understand how do you switch on and off the sand blaster's nose, then both your hands are in gloves? Awesome!

@johnbower

Ай бұрын

He has two feet which are not in the gloves

Amazing

素晴らしいです！ 因みに、コンプレッサーは業務用をお使いですか？？

For when the flow rate is "yes." Corundum is harder wearing than ceramic, if your abrasive is quartz. Crushed fluorite or calcite won't abrade most iron alloys. Ceramic is sintered aluminosilicates, some of which are on par with most tool steel, but not all of it, especially the dominant clay mineral fraction.

In the 4th noozle, the internal (brass?) tube doesn't wear out as the 1st example? great work regardless!

@jisakukobo

Ай бұрын

I installed a black rubber tube. Rubber is a material that is not easily abraded by sandblasters.

Awesome work. Eventually blasting will dull the glass. I would add film tear offs to the inside off the glass. Then you can tear off a layer and have great visibility again

@jisakukobo

Ай бұрын

thank you for the advice. I already have the film on.

four very good

Brilliant!!!!!

Muito bom 👍

4 is perfect! Where to find such ceramic nozzles?

@jisakukobo

Ай бұрын

amazon

By the time I ever would make this it would come in good use because most of my stuff would be rusted by then lol

Hi, the last one is the best :)

Awesome.

Nice 🎉

Where would I get those ceramic nozzles? Cant find them in aliexpress

good job, look please, there should just be a vacuum cleaner that brings the sand from the bottom into the bottle directly into the sand feeder at the top and it would be a continuous cycle

@jisakukobo

Ай бұрын

The last type solves that problem. I would be happy if you could watch the video until the end.

In one of his masterclass videos, Dan Gelbart (KZread --> search --> Dan Gelbart) proposes to use supermarket-checkout-barcode-scanner windows instead of a glass pane. Apparently, these have a scratch-resistant diamond coating, and are optically clear (as they need to be for a scanner), while being relatively cheap (as they are mass-manufactured for this specific application). The hard diamond coating gives them a nearly infinite lifetime on a sandblasting cabin. Do you have thoughts on this?

Genius!

Great 👍🏼

とても良い手際。几帳面な方なのかと思いきや、マスキングテープを雑に千切ったり、接着剤をアバウトに塗ったり、シーラントを指先で拭ったり、興味深い。 チャンネル登録しときます。

Can you try making a nano bubble generator ? ❤❤

Nice

How do you turn the air on and off? Did you add a foot pedal?

@jisakukobo

Ай бұрын

Yes It's a foot pedal.

Wat kind of sand did u use

Great

GENIUS!

I think I have saved 6 videos of yours to build for my 5m x 10metre shed …

Hi! Wouldnt it be beneficial to add some magnets to the sieve you use to re-fill the sand? Just to filter out some metal particles. Or doesnt it dimish quality, if metal parts remain in the sand? こんにちは！砂を再充填するために使用するふるいに磁石を追加することは有益ではないでしょうか？金属粒子をろ過するために。それとも、砂の中に金属が残っていると、品質が落ちませんか？

Nice build. Unfortunately the price of material now sometimes makes the cost of a DIY project inhibited as compared to a cheap Harbor Freight model alternative. The cost of that 4" schedule 80 PVC slip cap is $56 US if you can believe that.

So much beautiful and like 👍👍👍👍🙏🙏🙏

How powerful Air compressor are you using? What is CMF?

@jisakukobo

Ай бұрын

I don't know the exact model. I shot this video at a pressure of 0.4-0.6MPa.

It deserves nothing less than my congratulations!!!

If you place magnets in the collection tray, most rust would be picked up

タンク容量や使用コンプレッサーなど教えて頂くことは可能でしょうか？？

@jisakukobo

Ай бұрын

コンプレッサーの型番は分かりませんが、0.6ＭＰａで運用しています。

Какая резьба на тройнике который вы используете 1/2 или 3/8 дюйма?

9:15 の枠を塗装しているブラウンの塗料、とても良い色なので何を使っているか教えていただけないでしょうか？

@jisakukobo

Ай бұрын

ワトコオイルだったかな？申し訳ない、なんだかわからなくなってしまいました。

Whice camera use sir ?