Amateur Radio Callsigns Explained - Ham Radio Q&A
Ғылым және технология
Prospective hams and even new amateur radio operators experience a bit of confusion when it comes to call signs. There seems to be an endless variety and variability‚ and for some‚ they just don't make any sense at all. But call signs are vital and once you are licensed they become your on air identity.
Amateur Radio Call Sign System: www.fcc.gov/amateur-call-sign...
Vanity Call Sign Program: www.fcc.gov/wireless/bureau-d...
Support Ham Radio Q&A by shopping at Amazon: amzn.to/2kO6LH7
Read my blog: www.jpole-antenna.com
Colophon:
Camera amzn.to/2GV2Og1
Lens amzn.to/2GWC5zU
Wireless Microphone: amzn.to/2qt3vDc
Microphone: amzn.to/30lJheO
Music by license: www.premiumbeats.com
Пікірлер: 263
Excellent video on call signs. I got my Technician's license in Nov 2019 and within a week applied for my deceased father's call sign. Pleased that the FCC does this at no cost.
@JrGoonior
4 жыл бұрын
I've had my Tech license since 2002, when my uncle died in 2017, I applied for his callsign and was granted. He had his since the early 70's and I really wanted to keep it in the family. 73's... Formerly KC9BUC, now WB9LIY.
@thJune
3 жыл бұрын
Quick question for you (well it might be a bit longer to answer if you have the time). My grandfather was a huge amateur radio guy and had his call sign since 1938. He was big into the amateur radio stuff all throughout his life and even up to his passing was an active member in the community. Honestly, I didn’t know much about all of it and the community, but recently I bought a very old receiver at a garage sale and tinkered with it during lockdown. It was fun and kinda kicked off a bit of an interest in the hobby. It also triggered a FLOOD of memories of my grandfathers basement full of old equipment and even researching his call sign online (to my surprise, he was in a few magazines in the 50’s - and my mom and the family never even knew about it!). To that extent, he passed away in 2008, but apparently had the call sign thru 2018 and they never canceled the license. After some thinking and talking with my mom, I’ve come to the conclusion that I really don’t want his legacy to die along with that call sign. I’m not anything when it comes to am radio, nor ham radio stuff, but I’m interested in obtaining his old call sign just for legacy sake. Can you tell me what I need to do to make that happen? I see there’s a bunch of licenses and whatnot involved and am willing to obtain them as needed, I just don’t know where to start. Thanks a ton in advance! I sincerely appreciate any and all help you could lend me.
@roberts3942
3 жыл бұрын
@@thJune To obtain your grandfather's call sign (assuming it is still available), you will need to pass a Technician's License exam. Then, you can apply for your grandfather's call sign. Start with ARRL.org to find out about how to get your license.
@thJune
3 жыл бұрын
@@roberts3942 thanks Rob! I sincerely appreciate it!
@renedperez
3 жыл бұрын
I just received my call sign today! KN6PQC, 73 ya'll.
Clicked in the video because the thumbnail had the license from Ashland WI I grew up across the bay in Washburn. Great video.
@KB9VBRAntennas
2 жыл бұрын
Great place, we vacation up around the Chequamegon bay a couple times a year. Usually head off to La Pointe for some island time.
HIS EYES... HE STARES INTO YOUR SOUL
When I was first poking around in the hobby in the early 1960's, it was explained that the shorter calls were issued to higher classes as a "reward." Since CW was very popular (and knowledge of code was mandatory) the lower classed calls had more characters to require operators to pound out more characters and improve their "hand" with code. As they advanced in skills, the calls became "shorter" as an incentive and reward for improving. KD4VEG
I got my Novice in April 1981 and was given KA9KWM. This was years before the VE program was created. I think the FCC simply went to KA prefixes after exhausting all WD sequential calls. At that time were also issuing N prefix 1x3 call signs to Technician and General Class operators because the K prefix 1x3’s has all been assigned. In those days any Ham who held a General Class or higher license could administer a 5 word per minute Morse Code test to a prospective Ham oand once the code test was passed, the licensed Ham signed off verification on FCC Form 610 and sent it to FCC HQ in Gettysburg PA. The FCC then mailed a written test to the licensed Ham, who then acted as proctor while the prospective Ham took the written test. The test was sent back to the FCC and if the person passed, they were granted a Novice Class license. In order to upgrade, we had to schedule an appointment with the FCC, either at the Call Area Field Office, or every few months an examiner would come to a central location somewhere in the call area. I went up through the ranks through Tech, General, Advanced and finally upgraded to Extra in 1985, when the 20 WPM code requirement was still in place. I put in for a call sign change in 1986, long before the vanity program, and was assigned NV9Z, which I still hold today. 73
I was WV2ZPD as a Novice in 1962, WA2ZPD as a Technician in 1963, WB7EGN in 1976 in Phoenix, AZ, WB1BTO in 1977 in Stamford, CT, in 1977, later in the year, back in NY, I again was WA2ZPD, because it was before the new call sign system started in 1978, General Class, still FCC exam, in 1979, Advanced in 1994, Extra in 1995, and W2CH, vanity call in 1997, until today. Also, V25CH, in 2004, while operating in Antigua on vacation.
@kb5elv
4 жыл бұрын
Raymond Martin Thanks for the clarification on when the callsign issuance procedures changed, I was never clear on whether it was '77 or '78 when it all shook out.
@DOCDEVOE699
4 жыл бұрын
in 1962 I got my novice ticket as WNØDEQ and a year later got my ticket as WAØDEQ,,, and eventually let my ticket expire, now I am 71 years old and because of bad record keeping back then, by the FCC and whom ever else was keeping records,,, I can find no record anywhere that my license actually existed,,, I have talked to several people that told me I was not telling the truth because they could find no record either,,, my question is,,,, does anyone have any ideas how or where or who I can talk too , to get a copy of my old license ,,,, I might even take the test again ,,, and hoping that I could get that old call sign again if it has not been re issued,
About vanity call signs: We all are different. If somebody became an extra-class operator but decided to keep his 2x3 call sign -- fine, whatever floats his boat. To me, though, a 1x2 call sign, especially if it starts with a W, has a timeless, classic look, it's A BEAUTY, and I want it -- to feel good after I've spent countless hours studying for the extra exam; it's like hunting DX, finally getting your DXCC award -- you want it to look great and you want it to be on your wall! It's your achievement! It's a hobby, and we do it to feel good, right? Some say "They are dead people's call signs"; well, I respect those people -- they loved to do what I love to do. A call sign is not a 1991 Ford Taurus that has been in 7 accidents and smells like a dump. When somebody hears your vanity call sign, they type it in the logging program on PC and what they see is YOUR name, your address, your picture,... not some other ham who is dead. There are other reasons to get a short call sign; for example, it's a big advantage in a contest, especially CW.
I never realized the US system was so complicated. Here in Canada, all call signs are vanity signs. We are limited to 2x3 or 2x2 callsigns because Canada does not have any complete run of a letter sequence (i.e., we don't own all the C's, V's or X's for example). 2x2 calls are only available to amateurs that have been licensed for 10 years or longer. We also don't have all these different classes of licences. Just two - Basic and Advanced. You can get full access to all the amateur bands with just the Basic qualification, so long as you get at least 80% on the exam. Otherwise you need the Advanced. The only real limitation with Basic is the amount of power you are allowed. The names we use, give you an idea of the skill level of the operator, where as for the US, the terms technician and general (in particular) don't intuitively map to the skill level.
@JxH
4 ай бұрын
"Here in Canada, all call signs are vanity signs." Not exactly a correct statement, unless you include the word "recently". Way back when (e.g. 1970s), they were often handed out in alphabetical order. The DOC examiner going down the line reading out the suffixes and pointing to each of the successful candidates. That's how my callsign was assigned and I still retain it. Famously, one local old timer, recently a SK, speaking on 2m (everyone heard it) said, "Don't listen to them; they've got their initials as their callsign." It was comedy gold.
AWESOME video! This kind of history is always fascinating to me. Thanks for making this one!
my favorite channel for ham stuff explanations ! great shack too
Great information! I always wondered how they were generated! Thanks again!
Hey Michael! Thanks for taking the time to put this video together. I've been a ham for about 30 years. Although I had a pretty good understanding of the basics, I definitely learned more about the call sign system. Scott N1KMX
Thanks for another great video Michael. I always enjoy them and you provide great information, and would love to see them more frequently. My KB9VBR JPole antenna is fantastic and I recommend them to everyone.
Great explanation and history. Thanks for sharing!
Great information Michael. Thanks for the effort in making this informative video. And I did press the 👍
Thanks for this information! The whole Call Sign structuring is a bit confusing and you helped explain how it works a bit better. Thank you! Also love the J-Pole! Ordered a second one last week! Works perfect... Simple! 73's - N1UI
AWESOME AND THANK YOU! I have not taken my test yet but have wondered about this for many years. I knew it was based on license class but wondered what happened if you tested up. Definitely did not know about the vanity license option or being able to use a deceased relatives call sign. Thank you again for this.
Thanks for the info. I got my tech+5wpm ticket in the early 90s and got a 1x3. I liked it and kept it for my general and a region move.
Very clear and concise coverage of the topic! 73's de WB2TAW.
Accurate and comprehensive overview - congratulations! Not sure why this is not covered in new ham classes or the exam process. I see vanity applications every week where new amateurs have requested tactical calls - JE3P, VICTOR1, EM0COM, etc. We need more Elmers!
Good job and thank you. I still have my call from 1987 kb7fxj but now live in Alaska.
Very informative and well done. Thanks!
Excellent joy explaining Call Signs! NM5SP Alan
Thanks for the video, I did find this information out before taking my test's. The FCC (ULS) has this information, it takes some reading. Another challenging thing (if you don't already have video(s)) is to understand all the band uses/restrictions knowing most newer radios (especially imports) will TX outside of band/power limits allowed. Great channel! 73's AJ6JR
Yep.. My first was Novice.. KN5MPJ.. Later it was WB6PBQ, later N6GHG.. Now N7GHG
Thank you! Great info sir.
Thanks - breaks it down nicely.
Very nice rundown of how the licensing structure is. I hope a lot of people enjoy this. 73 de n3pyj
Good stuff, Michael!
Great video I am definitely subscribing 73!
Very well explained thankyou
Excellent demonstration my call is WW5D I picked it up when I lived in TEXAS 5 call and now live N. Phoenix, ARIZONA 7 call. I will always keep this call 73 Have a great day.
Great video! thanks for making it!
as a ham since 1964 i learned something new again..thanks.73..de..WA5MKU
Just got my license at age 60. My wife says my call sign is Kurt Owns 6 Big Fat Rhinos. 😂
Got my Tech and General as K4PMG in FL. Moved to CT where I requested W1LSZ, that a person I knew had, when he passed away. Got it no problem.
Good stuff. Relatively new ham here and find your stuff very informative. Love to get me a 1x2 someday.
Answering the question that's been on everyone's mind.
I was not expecting this video to hold my interest (since it popped up as a "Suggestion".) But low and behold, here I am eager to say thank you for this video, Mike. As this hobby continues to struggle against other communication technologies, it's videos such as this which earn a rightful place within. Again, thank you this presentation. (Subbed) *Now recalling the days of waiting for the (phone book size) Call Book to arrive in the mail 🤣* de...N2QN (Formally, N2UXH...KG2CL...AA2XN...KQ2U)
Excellent presentation. Being licensed first in 1956 as a 13 year old I've been through a bunch of these. I was also first licensed in Wisconsin (Manitowoc). Like many I was first a Novice KN9CAH and six months later after taking the General test in Milwaukee it became K9CAH. I held a General class then when it granted all privileges. I moved to Maryland after graduation from the UW in 1964. While 2x3 calls were being issue to new hams in the 3rd call area, apparently if you ever held a 1x3 you kept it and I became W3DRV. At the end of the 1960s incentive licensing came in and I passed, a month apart, the now obsolete Advanced class and then the Extra class. In ca. 1977, the FCC to give a further incentive to upgrade to Extra they permitted Extras with 20 years of ham time (which I just made) and then in batches by some dates of issue of the Extra the option of a 1X2 callsign.. to the extent they were not held by anyone else. That was when I got my W3JT call (my initials.) The first to be able to get a call that way were those who got the Extra Class when it meant nothing in extra privileges. Those were VERY few in number. Up to that time anyone with a 1x2 callsign (as we joked) got that call the day after Marconi did. There was only one in my hometown, we was licensed before WW I. I was in the second batch, about the first 2-3 years of incentive licensing. I was at the USPS office at midnight of the magic date. BTW both of my previous callsigns have been reissued. One more anomaly. I also held (and still reserved for my use), the callsign KG4TJ (KG4JT had been used) for an operations when I was at Guantanamo Bay, Cuba in 1995 when I was down there on a Defense Dept. work assignment.. A KG4 prefix with a two letter suffix is reserved for Gitmo (The Gitmo Ham club, through me, requested the FCC not issue KG4 prefixes, but they ignored that. The FCC said a two letter suffix was enough to identify a call as being from Gitmo. Issuing ham tickets there was an "other duty as assigned" to some NCO down there. A technician working for me down there greased the skids for me to get that call. Getting a 1x2 call when I did was considered to be "for merit" not a "vanity" and I do not pay the vanity fee.
Thanks. That was informative!
I tested directly into getting a 5 wpm Technician license in early 1986 and received N3ERZ. The cutoff of for when the no-code was mid-1987 as I recall. I have subsequently received my grandfathers callsign of K3PSO sometime after he became a silent key and also have processed the paper upgrade to General I was overdue for from when the code requirement was dropped.
i just got my callsign at Dec 2018, YD7JBA its great video
I remember when the FCC change one callsign to KC6, my brother got one and when he went CQ had instant replies. The KC6 at the time was the Caroline Islands.
Hey there from Illinois, my original call sign was N9QDO issued back in 1991 just out of high school and I now am after requesting a call sign change KC9QIO
Good info, 73's!
I have they Motorola speaker too. That is the best comms speaker I've heard.
Love your videos! 🤜🏻👍🤛🏻♡♡♡
From what I understand prior to the early 70s, The “N” prefix was assigned exclusively for use by the United States Navy and Coast Guard but when the "K" and "W" ran out they started assigning the "N" prifix to technician class holders. I still hold my original call from the early 90's at that time the "N" was issued to both code and no code technicians. 73 Harry N8YTV
7:20 I received a systematic callsign with an 'AG' prefix for my first callsign. Now granted, I tested from zero to extra in one session, but it was a systematic assignment in which I received it.
This was a nice summary. I got my Technician license five years ago and shortly after acquired a vanity call sign. The one I wanted was a number outside my region as I wanted the year of my high school graduation. I honestly wasn’t aware of the region system when I applied for the vanity call sign. Well, the FCC issued my vanity call sign and I mentioned to a friend of mine that I had recently obtained my license. Her father, now a silent key, was a long-time ham - something like 50 years or more. He told her that my call sign was not legal since it did not match my region. I was hesitant to use it at that point and did not know any local hams to ask. I got busy with life and never got a radio and got started, but I always was wondering if I actually was legal to use the vanity call sign. I now have time, with Covid-19, and am researching radios and about to make a purchase. I was planning to contact the FCC to ensure my call sign was legal, but you have put that question to rest. Thanks!
@dwightstewart7181
4 жыл бұрын
There is no "region" requirement today. Hasn't been in many years. Your callsign is perfectly legal nationwide. Enjoy.
@KB9VBRAntennas
4 жыл бұрын
Your callsign is legal. The rules have changed concerning region numbers and if the FCC issued it you can be assured it is ok to use.
@LTVoyager
4 жыл бұрын
KB9VBR Antennas I just ordered a TH-D74A last night so it is time to get started. Just have to pull out the ARRL study manual and refresh a little.
@gerardo7290
3 жыл бұрын
If it's certificate by the FCC it's completely legal.
Very informative!
Thank you
My original call: KB0KYV was difficult for ops to copy when working DX on SSB. It was also a handful to send on CW. I was happy to find out that the vanity callsign program is now free! So last month, I got my new vanity callsign: K0SAV (SAV are my initials). It's easier to send on CW and it's easier for ops to copy on SSB in weak signal conditions. I'm happy!
Interesting, thanks
Great video! Thanks so much for the well put information. I am WRMY975 (GMRS) but soon, hope to be technician licensed in HAM. I will let you know what I end up with.
Thank you for this information.. my father had.. W1ZYC and my uncle had K1DVL ow i can understand it...
excellent video
This is one place 11 mtrs kicks ass over ham radio... 2 devision usa.. If you move state no problem just tell folks your in washington or virginia.. When i hear a call on 11 i know where its from... On the ham bands get the book out... Great video well done for tackling it.. Not for the faint of heart
Thankss
That W9AJU callsign really caught my eye. I was actually at Pauls house back in the very early 1980's. I worked him on 146.52 simplex from my folks house in Cable, Wisc. I drove up to Ashland and picked up my W9AJU qsl card. Dave N9HF Ormond Beach, Fl.
@KB9VBRAntennas
2 жыл бұрын
That's a neat story. I believe I picked up this card that was in a stack of QSO cards at a flea market.
I applied for my vanity call the day after my assigned call was listed on the FCC site. I now have K0 and my initials :) Now my call sign license plate on my car is only $10/year beings its an 'Amateur Radio' plate instead of the $40/yr 'personalized plate', wohoo!
thx for that micheal, previously KB9YSZ cheers n 73
I started life as KE8MMQ which wasn't too bad to say on the local net check-in, but I decided I wanted one that was more related to my line of work. Since "Plug and Play" was the big marketing phrase in computers at the time, and I happen to work in the IT field, my call is now W8PNP. I think once I upgrade to General, and later Extra, that I will keep what I have.
Thanks
My original Novice call sign started with WV2..(circa 1959) as novices were identified back then....Shortly there after novices received WN call signs and when you up graded to either Technician, Extra or General class - you received a WA call sign. The V or N being replaced by an "A'
1993, no code tech issued 1x3 N, expired smd years later retested and issued 2x3 KC, vanity request, got old N number back
WB5QXH, great video, I knew some of it but this really good video, thank you.
I tested spring of 1979 by appointment with the fcc no vec got the call KA8FUF now W8RIC.
My brother callsign is KH2PT technician class, and General class, then when he passed advance class, it was change to AH2DJ, then he passed the Extra class license, due to no availabke 2x1 and 1x2 callsign, he remained AH2DJ 2x2 call. Its hard to get a 2x1 or 1x2 in Guam island since all the 2x1 or 1x2 is taken during that time.
After Watching A Few Of Your Videos, I Subscribed & Bought That Battery Because You Liked It So Much. Any Love For 11 Meter Sideband Callsigns? Maybe What Not To Do, Thanks.
Thanks!
@KB9VBRAntennas
2 жыл бұрын
Thank you so much for your support. It is really appreciated.
Back in the 1960's when I moved from Arizona to California, I went from 7 land to 6 land. I had to give up my W7 call and I was assigned a WA6 call. Now it's really confusing. I'm now back in Arizona but I still have my WA6 call.
Sounds fairly straight forward, very much like in Sweden! 73 de sm5zeh
👍 Thanks for the detailed explanation. It's probably the clearest one 'out there'. Q1: What is the situation with expired call signs (either silent keys, or abandoned ones)? When are they eligible for reissue? Q2: Are hams allowed to hold more than one personal (as opposed to repeater or Club) call sign?
@KB9VBRAntennas
4 жыл бұрын
a callsign is available for reissue 2 years after it has either expired or has been cancelled. The only exception is that if the call sign was held by a deceased close relative. An heir can request the callsign inside the 2 year window. As for your second question‚ normally an amateur can only hold one call sign- but they can also be a trustee for a club call sign so they can hold a 2nd one. But you are limited to be a trustee for only one club call so the answer would be two.
Good information. '73 / Steve / K4SRF
I've got a Moonraker 4 it's mounted right above the convention center
I didn’t like how KN4SJK rolled off the tongue so I tried to get N, K or W4JEM which is my initials. So I checked on EJM which was my dad’s and N4EJM was available. I choose 2 others but they granted me my first choice. 73
Nice job! W4DQ
Interesting explanation. but if I'm not mistaken the 2x3 calls starting with KA were in place prior to VE testing. I got licensed in 1981 as a novice with my original call of KA3IWW. I kept that call sign when I upgraded to General class in 1984 and at that time we were still testing at FCC offices. I'm not sure just when the VE system started.
@mikethetuner
4 жыл бұрын
You are correct: the KA prefix was implemented in 1978. The VE program (through the ARRL anyway) began in the fall of 1984--I became a VE that November. Like you, I well remember going to "Charlie's House," i.e., before the FCC, to take General, Advanced, and Amateur Extra. Those were the days...
@chrisblaase2700
4 жыл бұрын
I got my Tech and General by testing in front of an FCC examiner and got my Advanced and Extra by testing in front of a VE (all before the code requirement was dropped).
@nealbeach4947
15 күн бұрын
My Elmer/neighbor administered my test in 1980. I became KA8LQP
Excellent and well explained. Why does something so fundamentally simple become a complicated nightmare? I guess that's government for you. Much the same here in the UK. Thank you. J
thanks for this video best 73 from Felix HB9ABX
Would you be able to make a video on Callsigns and Emergency Transmitting procedures?
Very interesting! I am from Austria/Europe. It is a small country with about 8 mio inhabitants and about 6.000 hams. So, the prefix for the whole of Austria ist OE, that is enough. We also have a region code, from 1 to 9, which comes in handy, because Austria consists of 9 federal states. 0 is reserved for "extraterritorial" stations: an Austrian astronaut at the ISS had OE0 :-). The suffix is 3 characters long, only very old callsigns are shorter. The callsigns are assigned directly by the government, and are given for a stationary facility and your person. I do not know, what happens, if you got more than one station within your region, but the suffixes are unique for the whole country. So, if you have OE1ABC assigned, and another station in another region, say 3, you additionally get OE3ABC assigned for that station, both bound to your person. The authorities may inspect your gear once a year in regular terms. Thus, you may choose your suffix, but within a range of "free" ones. The next rule regards your license: Austria is a CEPT-country, so the maximum allowed transmitting power is 200 W, or 400 W, if you apply for it, and can show, that you did not make trouble with the 200 W in the past. But there are club stations and the like, assigned personally to the responsitivity of an operator, which may transmit with up to 1.000 W. The suffixes of these callsigns all start with an X. That is practical, because all repeater's callsigns start with the X. Not enough: For special occasions you can apply for a transient callsign for a special occasion. OE1YOUTH20 could be valid. I am obliged to add /P, /A, or /M to my callsign, if I am somewhat mobile: /Portable, /Air, /Maritime. OK, /P will be sufficient. A good practice is to prefix your callsign with the "country prefix", if you are at least anywhere in Europe: SV/OE1ABC/M gives a hint to your QTH - you are sailing in Greece in the Aegean Sea :-). Europe is a cluster of abut 30 countries, and not each one has a unique country prefix, but it is relatively easy to spot the country. vy 73 de oe1llc
New sub. Excellent content. Not sure I really like the vanity system. I like it that call signs were like regrettable tattoos. You're kinda stuck with it.
When you said some call signs might be hard to say, I immediately thought of Japan and the letter "L". :-)
@JoeR203
4 жыл бұрын
@BC Bob I was going to say "R", but thought about them pronouncing "Hello" as "Herro".
@DvorTerrier
4 жыл бұрын
I remember I had a QSO with a ham from Japan, and I got one of the letters of his call sign wrong; he was correcting me, "Not Rondon, not Rondon, LOMEO! LOMEO!!!" OK, I got it; Romeo! When children are born, they can hear the difference between all sounds very well; in about 4 months of listening to their mothers, certain sounds ("letters") -- depending on the specific language -- fall off the wagon. A 4-month old child in Japan will stop hearing the difference between L and R, etc. That's how our brain works; it becomes a little different in different countries. imagine a situation when somebody tells you that the letter Щ is pronounced "Bee", and the letter Ж is pronounced "Bee"; you, like, "There is NO DIFFERENCE!", and the dude goes "There is a HUMONGOUS difference!", and you go "Are you KIDDING me? Get the f**k outa here!"))
Interesting. I was first licensed in the UK in 1973 with G8IAX, a no code VHF only license. I passed the morse code test in 1981 and then waited months for a specific callsign. For reasons, I don't recall I wanted consecutive letters in the alphabet. I am G4LMN. I got this a bit wrong as it does not roll off the tongue very well on 'phone but it's nice in CW. I also choose to use an abbreviation of my middle name on the air, again because it's easier in CW, so if you have ever worked me you'll know me as Ron.
One scenario you didn't mention is when a person walks into a VE session with no amateur radio license and walks out as an amateur extra (meaning they've passed all three elements), the FCC will issue them a 2x2 call sign.Great video as always. 73 from KC2WLR.
@billrich9129
4 жыл бұрын
Yea, did the same thing, went and passed the first two at the VE, got a General 2x3, and went back
My first call was a 2X2. It has a zero and an oh, making it hard to identify when typed, and it uses some of the longest CW characters, slowing down CW contesting. But I still have it. It's me, and I'm not particularly vain.
I think I might have met you in Streator Illinois.
Love your stuff! Where did you get that metal rack behind you? Thanks for being an Elmer.
@KB9VBRAntennas
4 жыл бұрын
It's an Edsal workbench with a formica top and the electronics riser. My wife's employer used to do service work and I purchased it surplus when they cleared out that department. It looks like you could piece the components together via Amazon or Global Industrial.
In the late 1970s, I had an Amateur Extra class license with my original 2x3 callsign, then I became eligible for a 2x2, and then a 2x1.
Where did you get the information that the N prefix was associated with the dropping of the CW requirement for Technician?
I have a 1x3 call , NØDPR, I was required to pass a code test to become a novice and also to upgrade to general..I’m not sure that’s what you said in your explanation on call signs?
KI5HSH, that’s my assigned callsign and I can’t tell you how many people mishear that. Certainly trying to get a higher grade license for a shorter vanity.
Hello and thanks for the wonderful video, but there is something I know that is not quite right. I was first license somewhere between 90 and 91 or 92. I was in the first or second testing of no code technicians but I was a Tech Plus, as I had previously passed novice Theory and that day I passed five words per minute code along with technician Theory. I was issued the One X three call N8PEF. My Elmer was N8KKR and had been licensed many years and there were many techs in my club who had been hams for many years and had entered traditionaly as novices. When I upgraded to general I requested a new and it was horrible for CW so I got N8PEF back through the vanity program. I went inactive after just a few years and have no idea what went on then. I am in the process of putting together a new station now and upgrading to extra and want a W prefix call. 73
Thank you so much for clearing that up for me. Just wished I had known this before I got my vanity callsign when I got my General Licnese. I have decided to upgrade to an Extra when all this pandemic stuff is over and hope to make my callsign easier yet again. (KI5FQZ) Vanity KI5IBO
@captainjjz7141
4 жыл бұрын
Theres online exams you can take now due to the pandemic. Go onto hamstudy website and go to sessions. Most common one doing online exams is W5YI. Good luck! :)
In Germany its very easy, we have DA-DR. Edit: while writing the post.. its not THAT easy.. DE is reserved for SWLs, DI is for experimental stations (non ham-radio), DN is for learner calls - every licensed op can get a DN call that is registered to him/her and is only to be used by an unlicensed student operator where the callsign owner has to be present at the station. DO is for the novices (who get extra privileges in the US when visiting) that are allowed on 160-80-15-10m and 144/430MHz + some other higher bands. 100W max. DP0 and DP1 is for "exterritorial" stations that are not located in Germany. The only active calls i know of are DP1POL and DP0GVN (Georg Von Neumeyer research station in Antarctica) as well as DP0ISS, one of the official callsigns on the International Space Station. DP2-9, DQ, DR are special calls for commemorations, club stations, contest calls (always officially a club station). So if you work DP5X for example, its neither in space or Antarctica, its in Germany. These are never personal calls. Also 2x1 calls are never personal calls here. Those fall under the same category. Aaaaand to complete it, officially we also have Y2-Y9, adopted from the former GDR. Those are never issued in with one exception. During the WRTC (World Radio Team Championship) 2018 there were Y8´s used, all 2x1 like Y89A or Y86Z. All other callsigns are Class A (highest class) with some exceptions like the use of DB0 for repeaters and so on but that goes too far. There is no regional meaning in the callsigns, so DL1ABC might be the neighbor of DB9XYZ. So there is no point in saying "I worked a DL6" instead of just DL like it is with the regional calls in the US.. We dont have to renew our personal callsigns and licenses, a big plus in my mind. I can already see me missing to renew my US call.. Thats it for now ;-) 73 de DD5ZZ / KD5ZZ
Here in the UK .. If the prefix starts with G, M0, M1 and M5 it is allowed the full legal limit. Prefix 2 ... 50 watts of power. M3, M6 & M7 are allowed a maximum of 10 watts.. There's also a regional secondary locator.. England - No Regional Secondary Locator Guernsey - “U” Isle of Man - “D” Jersey - “J” Northern Ireland - “I” Scotland - “M” Wales - “W”.
@clifficus
4 жыл бұрын
Evan Jones Yea, all gone to hell now, has no rhyme nor reason to it, just a shambles😢
I wish the region was fixed. I realize people can move, and don't want to change, but for vanities they give any region to anywhere. I got my 2by1 as an extra vanity and stuck with one land. Its where I live, and did not even look at other available region short calls.