This was helpful. I'll definitely use this knowledge next time I polish my boat.

Nice video, good finish.

@OutdoorsmanChannel

6 жыл бұрын

+MARINE POLISHING Thanks. Don't forget to subscribe. I will be having some fiberglass videos coming out soon.

CAUTION! If you get the boat to a mirror finish you will scare the fish off when they see themselves.

looks good. I'm glad I found your video because I have the same torq 10fx for car detailing and I was going to use it on my bass tracker. I am thinking about buying a cheap rotary buffer at harbor freight and see if it will do a good job vs the dual action with clutches.

@OutdoorsmanChannel

6 жыл бұрын

Trevor Alexander Yea I've never seen it been done. Thanks for watching don't forget to subscribe!

very helpful, thank you

@OutdoorsmanChannel

4 жыл бұрын

Glad to help

Good information very informative. Nice boat

Looks great! Just picked up a Lund with the same paint and aluminum bottom. Curious how you cleaned up the paint?

@OutdoorsmanChannel

2 жыл бұрын

Didn't do paint. Ours was too thin and old. I suggest determining if there is a clear coat, if there is follow car detailing procedure. If there is no clear coat, you need to be a bit more careful look at buffing older cars etc. The only concern is burning right through the paint. What year is it?

All you need is some Mothers Mag & Chrome cleaner and a cheap car buffer. You can do the whole boat in about an hour.

@OutdoorsmanChannel

5 жыл бұрын

Yes more than one way to skin a cat. This is the way I prefer to do it.

Try Mothers Mag and Aluminum Polish, very cost effective. I like 3m products on Gel Coat, Finesse It 2, but kind of expensive.

@OutdoorsmanChannel

4 жыл бұрын

Actually dont own the boat anymore. I'm sure it would work nicely. Also would work good with a microfiber cutting pad or rotary buffer with wool. Thanks for the comment!

You would most likely get a better result with a rotary buffer and using a less aggressive pad that does more polishing and less cutting.

@OutdoorsmanChannel

5 жыл бұрын

Yes your right. It would be much faster, but I wanted to show the results of a dual action.

@Harlanmote

5 жыл бұрын

Landen Gruenloh You are exactly right., I use mothers mag and chrome polish an a car buffer. He’s doing it the hard way...

How often do you do this? It looks great! I live in Michigan with a lot of tannic acid in the water towards fall.

@OutdoorsmanChannel

Жыл бұрын

If you keep it waxed and clean not often. If not it will oxidize pretty quick

Rotary.polisher wool pad and nuvite polish different grades use the s last to remove swirl marks and mirror shine

@OutdoorsmanChannel

3 жыл бұрын

Yes definitely another good method. Thanks for watching!

Interesting video. How long does the shine last before the aluminium oxidises ?

@OutdoorsmanChannel

6 жыл бұрын

urbanimage depends how often you use the boat condition etc. For us about 1 year without wax it still looks shiny after a year just noticeably reduced. If you waxed I imagine a very long time.

@urbanimage

6 жыл бұрын

Hi, Thank you for your reply. I'm surprised that it lasts that well. I'm in the UK and have an aluminium canal narrowoboat that needs re-painting or possibly stripping back and polishing, which is why I was interested in your in your experience.

@elchicotony7637

5 жыл бұрын

@@OutdoorsmanChannel next time use a brown roush bar and a cutting pad and for finish use white pad cotton with white diamond or best zephyr 40 and u will see a bid difference

@elchicotony7637

5 жыл бұрын

To prevent oxidation apply as many coats u want of ceramic coat it will make the finish last longer

Take the 12'' side polish

مشاهدة بدي كرين نوع جردان سلفرادو

Hi there! I have a Pet Grooming Trailer. It is made with .040 aluminum trailer and it is all white. I do not know the differences in Aluminum but I am told it is .040 aluminum and it is white not silver. Don't know the difference but I would like to buff and wax. Any suggestions are greatly appreciated!

@OutdoorsmanChannel

Жыл бұрын

Treat it like you are buffing paint. If it's painted be less aggressive. Lighter polish and dual action polisher

@kat4animals004

Жыл бұрын

@@OutdoorsmanChannel Thank you!

Do you think this would work with aluminium that's about 4 or 5 times more corroded? Also is there much difference between a $100 dollar vs $600 buffer, in terms of how good the finish is?

@OutdoorsmanChannel

7 ай бұрын

Yes it will work. Consider wet sanding first. Don't let jabbing the right tool stop you. People used to polish things by hand and it looked great. Usually more expensive polishers do the work faster

@jaimeboysel5875

4 ай бұрын

There are some great chemical aluminum cleaners, like Purple Power or Starbright. You spray it on with a spray bottle, let it work for a few minutes, then hose it off. It works well, and provides a great base to begin polishing!

Next time use dawn and water. Quick wax adds wax that you will have to buff through

@OutdoorsmanChannel

5 жыл бұрын

It's a detail spray I didnt think there was wax in it, but I could be wrong. Thanks for the tip.

were you able to get rid of the swirls? I've tried multiple ways and still have swirls.

@OutdoorsmanChannel

3 жыл бұрын

Swirls on the actual metal or on paint?

@rossvanpraag8113

3 жыл бұрын

@@OutdoorsmanChannel on the metal

@OutdoorsmanChannel

3 жыл бұрын

@@rossvanpraag8113 This should work fine. You can also wetsand.

what up my guy needed a wheel

I just watched someone use wd40 and the results are amazing.. prob best to just use that and then a random cheap polish..

@OutdoorsmanChannel

2 жыл бұрын

I'm not surprised that putting oil on metal makes it look very shiny. If you actually want to polish it and make it last I suggest a quality polish and wax. Thanks for watching!

@hychap

2 жыл бұрын

@@OutdoorsmanChannelI understand your response but perhaps it would suprise you to know that wd40 was designed as a solvent and there's more going on that just making it shiny with oil.. give it a good rub with wd40 solvent, it gets smooth nice and quickly, costs hardly anything, clean it off, polish it.. good to go..

@UguysRnuts

2 ай бұрын

@@hychap And, it lures bass! since WD40 is made from fish oil.

you're so handsome..

orbital

@OutdoorsmanChannel

6 жыл бұрын

RockinRob71343 Yes they work better. Wanted to show results of dual action. Don't forget to subscribe!

@UguysRnuts

2 ай бұрын

@@OutdoorsmanChannel He means "random orbital". Orbital just means rotary.

use 0000 Steel Wool

@UguysRnuts

2 ай бұрын

Wouldn't use steel wool on aluminum. Marine stores sell bronze wool for boats which doesn't rust. Wet sanding with 3000 grit does a great job but is a lot of work.

Its aluminum not rocket science, spit and a donut would work.

@OutdoorsmanChannel

3 жыл бұрын

Thanks for watching