I had the GT lite in the past. THIS IS A PEFRECTLY DONE UPGRADE! They added the straps from base to pedals and added a better seat. As someone who had the GT-lite this seat will be worth every penny! Unless you have room for a permanent rig setup this will be your go-to rig trust me!

@DrR1pper

10 ай бұрын

Did you upgrade your GT Lite to this GT Lite Pro?

@thalastboss01

9 ай бұрын

FAX!!!

@999_weeb6

4 ай бұрын

Question, Can I replace the shifter mount for a bigger one so I can fit both my handbrake and shifter?

@Cereal_Killr

4 ай бұрын

@@DrR1pper no... Got GT track

@ceralkill3r

18 күн бұрын

Wow never seen someone else in comments with a similar name

These folding rigs are getting better and better. But I'm still happy with my setup which is their wheel stand and some locking casters for my office chair. I notice the wheel flex a lot more than a chair moving left or right.

Great vid as usual, can't wait for the Micro Center store to open up in Miami, that's such great news!

I have this paired with my 8nm Fanatec GT DD Pro and this thing does everything I need it to do and with no noticeable wobble or twist. Love how light and foldable it is and very comfortable without breaking the bank or taking up a dedicated spot.

@amazin7006

8 ай бұрын

You can see it twisting and wobbling in the video. All that extra detail in the direct drive wheel is wasted without a stiff rig

@kirtperez8048

8 ай бұрын

can it handle load cell pedals?

@makisupport

8 ай бұрын

@@kirtperez8048 yup. I have them on mine also. Works great. If I upgrade to a 15nm I'd go more beefy rig.

@reviewforthetube6485

3 ай бұрын

​@amazin7006 it doesn't anymore they updated the wheelbase it barely moves now and comes with the right holes cutout already. The screws can now get very tight and again it doesn't even move. Mine has barely any flex using my 15nm dd+ and when braking it moves nothing when sitting on the chair it doesn't move man.

@R-py6uf

Ай бұрын

​@@reviewforthetube6485 you cant tell that to a basement warrior or an elitist, who think he knows better than anyone..

Thank you for all your vids. You are awesome and always to the point on what your demoing. Thanks again!

Thanks for the review! I ended up trying it myself with a Logi pro and I must be honest, I didn't notice nearly as much wobble as you did, even with the left foot pedal strap removed (easier to get in that way). I also didn't have any issues mounting, with the mounting plate in the forward position. If the mounting issue you described is true, that'll probably be a huge deal breaker for people.

@reviewforthetube6485

3 ай бұрын

Exaclty 12nm being used by me it barely moves. I wish he had the justice it deserved. I feel like he didn't even try tightening the bade screws enough or something was wrong. It doesn't even move unless you seriously yank on it. This is the most sturdy rig I've used for foldable and beats most regular rigs at this price and 200 dollars more. The pedals don't even move and the back of the chair doesn't when sitting in it. It's funny though he kept saying how impressed he was when using it and he coukdnt feel what we could see with the flex. So I don't get it. I thing he watched it back and seeing the movement got into his head? Either way the newer ones coming direct hsve an uodated base plate with the holes in it already. And it is tight af.

@boostedmedia

3 ай бұрын

We definitely made sure everything was tightened, etc. The video shows the flex for what it is and then I talked about what I actually perceive while driving.

I’ve been at the new Indianapolis location and they have a lot of sim stuff! They even had Simucube Active Pedals! Really a great place for sim racers.

Nice review, definitely gonna buy one after I bought my ready2race bundle at Fanatec. Exactly what I need, and the flexing of the unit is okay for me.

About the flex. I dont have space for a fixed rig, so I’m using a play seat challenge and 3 monitors that double as my normal everyday monitors (and of those 2 I already had and used anyway). 3x ultra wide actually. They are on my desk, the middle one on it’s own stand, while the side ones are mounted on arms. So whenever I want to race I fold the side ones in position, move my normal gaming chair out of the way and move the playseat challenge in. The playseat has at least as much flex as this one or maybe more, but only the forward movement of the wheelbase is distracting, however since I have a desk in front of me, I can push it up against it and the forward-backwards flex is gone. what remains is tactile feedback in the whole rig without having to use bass shakers 😊　crashes that cause sudden jerky movements in the wheel I can actually feel in my back just as if I was jerked around in the cockpit by G forces :D so it works out quite nicely, there are some upsides to a flexing rig besides the obvious downsides. of course it would be better to have a fixed rig, but this was a lot a cheaper, I still have more than 180 degrees horizontal fov and I only had to buy 1 more monitor with an arm and the playseat challenge and it barely takes up any space at all, so I’m quite happy with this setup after all. Really the only problem is my laziness as sometimes I just don’t feel like setting everything up for a quick race. 😅

I LOVE THOSE SHOES BRO, glad to see a non skater rock some classic skate shoes!!!!!!!! Beautiful!

First 5s told me all i need to know :P , that thing moves waaaay too much

@steventhane9849

Жыл бұрын

He does address it at 19:10 and 22:20. It may not change your mind, but I thought it might be helpful anyway.

@01Peebee10

Жыл бұрын

Built in tactile bass shaker, win! lol

@blackacidevll5826

Жыл бұрын

Agreed , that is a setup for someone without room for bigger sturdier rig

@HighValueTargetRacing

Жыл бұрын

​@@blackacidevll5826tell iis you mean New Yorkers without telling us you mean New Yorkers😂.

@johnramble713

Жыл бұрын

The f-gt lite looks studier, that's what I used with the R9 for a few months. The base feels like the heaviest you would want to put in the bar weight wise but in gt position it was solid

Very useful video thanks a lot. First time sim rig user here I just bought this with the fanatec csl dd 8nm and WRC wheel and normal cheap CSL pedals before even seeing this video so this will be extremely helpful for when i set it all up tomorrow. I didnt have a desk so chose this over buying a desk and office chair combo hopefully its good enough

@brextondesormeaux518

10 ай бұрын

@Steezy93 , Was thinking about going the same route as you. How's it holding up? And would you recommend?

@Steezy93

10 ай бұрын

@@brextondesormeaux518 Yeah im very happy with it, seat is very comfy. You definitely lose a tiny bit of fidelity with how flimsy the rig is compared to a non foldable one but if youre just casual gamer like me you wont care that much. Saying that i was able to tighten mine more than the guy in this video did mine moves a lot less, just make sure to tighten the 3 straps pretty solid and youre good to go. You will need to buy some nuts and bolts to fit the pedals they arent included.

Woooo! Can't wait for that Miami Micro Center! 😁 Those specs are just begging for the install of a Fanatec DD2 just to see what happens, lol.

I have the GT light non-pro version and it's pretty decent for what it is. I have attached an eBay handbrake ,6-speed h pattern and a micro keyboard being held by a car style tablet holder all on the right side. I built my own set of button boxes that I put on either side of the wheel. I bought a surround sound system and mounted it directly to the cockpit with the subwoofer underneath the seating area. If you're a taller 6 ft 1 it might be a little bit to small for you

I have the original Lite....I got it for my old Thrustmaster T-300 wheelbase. It works ok, but it's not perfect by any means. I just got a new CSL DD and switched over to a simpler but much more rigid steel framed wheelbase with an add on seat adapter. This setup was much cheaper than the Lite (only $150US) and it allowed me to use my existing gaming chair easily by simply dropping one or two of the wheels into an adjustable steel box which stops your chair from moving forward or back, a really nice setup IMHO. Combined with the stiff steel stand it's nearly three times as rigid as the Lite overall. The CSL DD doesn't move much if at all using it (it's the 8Nm version, btw). At the end of the day the wheel box folds up to allow for the whole setup to take up only around 3 more inches total floor space over the Lite. This was just an example of the choices you get now, you don't need to get all funky with a fully foldable unit like these anymore thanks to the seat box option now available that comes with quite a few different cheap steel wheelbases available on Amazon. For the record, the one I'm using is called the Marada Steering Wheel Stand with the seat adapter (there are a few options, just look for the one with the seat adapter). Why spend more than you need to? Great review as always Wil!

It would be nice if NextLevelRacing made that seat as a low priced option for sim rigs. FWIU the low cost seats are pretty much whats offered in this kit, just with more padding and race car looks. NLR should sell the seat and have seat slider mounts for it.

Cool to see the upgraded version hit the market. Was thinking of buying the regular lite version about a year ago, but ended up going up with a bigger modular rig from NLR :) Really happy with the setup currently.

@Vector_x

Жыл бұрын

Which one did you get?

@Rmx2011

Жыл бұрын

@@Vector_x NLR GT Ultimate seat add-on and NLR Wheelstand 2.0. Solid combo, a mix of old and new. The GT Ultimate seat is on the nearing the end of product cycle so you might be able to find a deal on it like I did a year ago. Originally I was looking for these foldable seats, but decided against it in the end.

I was just looking for something like this right now !

Thanks for the review, been tosing up between this andthe wheel stand 2.0 .. Would love a review of the Wheel stand 2.0 a little worried about the ajustability of it.

They can use the mounting holes as placement for more additions to assist in the rigidity

Thanks for the review on this. I'd like to upgrade to a DD wheel but I don't have the space for a full rig. I'd love to see some more reviews on products that try to bridge this gap. If you could do a video on NLR's Wheel Stand DD I'd love to see it.

@reviewforthetube6485

3 ай бұрын

I have a 15nm dd+ I use at 10 to 12nm on thise stand it works perfeclty.

I have this (this new model). the wobble is legitimately not an issue. You don't notice it when racing. Is it not as sturdy as an 8020 rig? yes. Is it still totally usable and better than a desk? 100% yes. its a compromise, but a pretty good one tbh.

@gabrielwiacekcolban1307

3 күн бұрын

Dead comment, but im getting a wheel rn (moza r9 + cs v2p + fanatec elite v2) and im gonna use it with my desk rn to save money, as well as i dont have enough space for a proper rig. Just wanted to ask if youd still reccomend a foldable rig? And comment: i feel like the wobbling would just add to the realism hahahah

Thank goodness for Microcenter.

Myself personally I have a Playseat Challenge for my steering wheel set up. However I have been very interested in upgrading to something like this!

I've got the GTLite, now I'm thinking about upgrading to this one since I plan on getting a DD wheel shortly and I don't think the regular GTLite can handle that. Also, it is pretty uncomfortable and this one looks way more comfortable.

Hi, have had the gt-lite for 2-3 years, with csl elite and dith ddpro now, for me is a great solution as i dont have place for a fixed cockpit. So this cockpit + VR allows me to simrace, othereide would not be posible, for the ddpro i have not complains, the only thing I would improve is the adjustability of the position of the wheel, as its too high for me. If you need something foldable is a good product, said that i would move to a fixed setup if i would have the space to do it. Another point, for me is better than use a table clamp, the feeling and experience is mote enjoyable for me and the feeling to be in a race car too. Thanks

I went with their wheel stand 2.0 for a foldable option that is still sturdy as a tank. Paired with a secretlab chair its amazing

@scottkocienda4057

Жыл бұрын

Thats the config i'll be moving to as well. Is the wheel tray for the chair as helpful as it looks?

@oreoking9513

10 ай бұрын

I'm thinking of going the same route, in your opinion is the wheel stand worth it?

@chrisCKDE

9 ай бұрын

@@scottkocienda4057 I have the same setup with the fanatec clubsport pedals v3, moza R9 and a secret lab chair and it is solid as a rock. not like a mounted chair but close enough. and it can be folded really low profile.

@reviewforthetube6485

3 ай бұрын

Hated the wheelstand 2.0 thos is much better. Everything is lined up, when braking it doesn't move at all. It's bene uodsted for the nee plate. It's solid solid when in it. I'm using a 15nm dd wheel on it and 0 issues when running at 10 to 12nm lol.

It needs another brace across the front of the wheel base. It could be easily done and would probably solve the issue of wheel base flexing.

Just so people know the wheeldeck has been updated mine does not flex much even when running at 12nm the screws tighten and now they have holes for fanatec gear and you dont even need to flil it upsideown. You dont need to drill out new holes. Buy direct from them and it comes with the new base with the cutouts. Also weird je said in the video he coukdnt reallt feel it moving much whikr playing yet at the end acted like it he could yet he kept mentioning how good it was. So i think his mind was playing tricks on him. Ive never used a foldable cockpit this good before nothing competes with it. The straps were a game changer. It will also now with the base plate handle 8nm no issues at all again my baseplate doesnt move even at 12nm. Ok well like the slightest but im not getting dampening and im really going at it. Again make sure to crank those screws and you are good to go! Im also only using 2 screws to hold my 15nm base and it still doesnt move! I travel alot so I needed this cockpit. Its perfect. Home rig is def better but i eas surprised by how good my expecrience was. I use it mlre then my regular rig now and the ergonomics of the chair just fit me so well.

This looks almost ideal for a low cost of entry option that I'm looking for. My only concern is that the bottom of my 65" inch TV is about 32 inches from the ground. I wonder if that'll be a bit too high for how low this cockpit sits to the ground. I might need to think about getting an adjustable TV stand.

Another great review, think I will pass on this one though, seemed to wobble like a blancmange! I do need something like though as I have to take my wheel down each time and put it away. I currently have a very old Wheel Stand Pro and its showing it's age with a CSL-DD 8nm and CS V3 pedals, although I think it has quite a bit less flex than this! I've been looking at the Coffee Racer as it looks a lot more sturdy and folds away into a nice box which will please the wife! So I will be interested to hear what you think of it.

I had the original and with a T300 it was great as an entry level low cost rig. Only reason i upgraded was that i outgrew it with my sim hardware.

Awesome video as always, super glad you were able to review this. This seems to flex way more front to back than the Playseat Challenge. Was hoping this could be a replacement for that for when I go DD, but I may as well just get low down shifters stabilizer system for the Playseat.

@jeffspruiel6686

Жыл бұрын

I've seen reinforcement kits for the playseat challenge but as of now, haven't tried any to make my dd setup more stable. I was hoping this was be a step up.

@PIDOFREAK

Жыл бұрын

@@jeffspruiel6686 doesn't look like much of an upgrade from the Challenge, so much flex

@albey1816

4 ай бұрын

@@PIDOFREAK - Its not an upgrade. The Playseat Challenge is twice the price of this.

@PIDOFREAK

4 ай бұрын

@@albey1816 its not?? maybe u looked at the logitech playseat challenge collab

I currently run a desk mounted G920, however, am looking into upgrading in the near future to DD. Do you think I should go with something like the NLR Wheel Stand 2.0 instead of this foldable cockpits for a better DD experience? My desk already wobbles quite a bit with the G920 so I don't think it could handle a DD wheel.

As a VR simmer, folding seats are ideal for me. Doesn't need to "Look" the part in VR. I use a modified playseat challenge, so this would probably be an upgrade. My question is if it can be conformed to a formula seating style, or if they're planning another separate product for it

@frozendragon6873

Жыл бұрын

I have the GT Lite and at the time of buying it I was contemplating the formula style version. It seemed to end up going end of line since it never came back in stock.

@user-wq8rf9sh4c

11 ай бұрын

f-gt lite can go formula position, but the pedals will lift, it will ruin your back, and be too much burden to get in and out. i had one but i sold em out because i prefered desk setup over that crap.

I have been using the GT-Lite non pro with My R9 and CRP pedals. You can see the flex but never bothered me. I am 6'4 280lbs. A desk/Chair usually is almost always at the wrong position to be comfortable to race for long periods of time.

@Jackson97201

10 ай бұрын

This is the comment I was looking for! I am about the same height and weight and have been wondering most on how this cockpit pit works with that.

Thanks for the review Will. I'm looking for its dimensions when folded with a wheel mounted. I know this would vary, but if you happen to have some dimensions I can work with, it would be much appreciated.

Why did they go with a rounded tube, instead of a squared tube for the wheelbase mount? Sure it could still wobble, but a flat surface would at least help

Love the video Keep up the good work❤❤

This concept should be made for flight sim to it is so smart!

Looks much more comfortable than the Play Seat Challenge.

I have that ring for my ps5. Its perfect for a g29 up to tgt2. Over that the rig will move with the force. But with my wheel its perfect and easy to move around

@lasarith2

11 ай бұрын

Did it come with bolts to mount the G29 , there’s non in the box the G29 came in .

Did you try mounting the wheel base plate backwards? It works on the non-pro version for Fanatec CSL DD bases.

So even with the 4-bolt pattern available in the GT Lite Pro, you only still use the 2 bolts on the front? That's actually important for me, because then I don't need to worry about upgrading from my good ol' F-GT Lite and just do that and have minimal flex. Thanks for experimenting this for us. I can keep using it, at least until I get myself a profile rig. ^^

I have this seat. I don't have to move it, so an easy massive improvement I made is to cut two lengths of 1" x 0.5" wood, and cut circular profiles into the end to approx match the gauge of the metal tubing. The length is to match the gap between the top bar that supports the wheel mount, and the bar on the floor below it. Wedge the pieces of wood in either side of the cockpit so you still have plenty of space for your legs, and then on each side get a ratchet strap and wrap it around the bars, top to bottom, with the wooden strut clamped in between. Tighten the ratchet straps and bingo. 99% of the flexibility and movement on the wheel platform is gone. Hassle, I know, but an easy DIY fix if you have this seat, and like me are annoyed by the wheel movement

A fold up rig that's transportable would be handy to have, it might make me want to leave the house again lol.

flexes more than ocon's rear wing

Been waiting for you guys to do a video of this once since release last week. I don't have a cockpit and have been swithering on playseat challenge or f-gt-lite/gt-lite as I have little space and need to fold away. Was hoping this option would be much better than those two. I think despite its issues and obvious flex, it flexes a lot less than the other two and will be what I end up having to get. I think if you'd used the packing straps aswell it might have been a little better, from what I've seen in other videos.

@tarushdei

Жыл бұрын

As an owner of a GT-Lite, I'd recommend going with a folding wheel stand with a desk chair you probably already own. If you can't afford a profile rig, save your money for other equipment in your setup. I've been using mine regularly for over a year now, and while it's comfortable and works for my TMX, I don't see it working well with DD's stronger than 5Nm. Even with the extra straps.

@PIDOFREAK

Жыл бұрын

i like my playseat challenge, i run it with 8nm CSL DD

@dill6078

11 ай бұрын

It's a bit pricey but the Playseat Trophy is VERY sturdy, comfortable and you can stand it up against a wall when not in use. I tried my DD1 on it at 20nm and no flex at all, same with my loadcells

@defxed

10 ай бұрын

I have the f-gt lite with 8nm csl dd, it doesn't flex as much as you think, if at all. When you're in it and using it. You don't really notice it at all and DEFINITELY NOT affecting your gameplay. Anyone that says otherwise is full of shit

@dylon0107

8 ай бұрын

​@@dill6078what do you use for a shifter and handbrake mount?

Would be nice to see an upgrade kit for the regular gt lite, at least for the seat. Endurance racing starts to hurt after about 4 hours with the normal version 😂

@lpearson88gmail

11 ай бұрын

4 hours in any car hurts me! 😂

Add a little fun to your video. What does the 30nm base look like on this rig

Great video Will👍🏻One question, what do you think of the wheel stand 2.0. Is it better than the wheel stand DD? Thanks 😀

@boostedmedia

Жыл бұрын

Haven’t tried the 2.0. Sorry.

I would love to see how stable it is versus the old playset challenge

Just bought one Waiting on order arrival ill see what it is like...

FLORIDA'S GETTING A MICROCENTER? MIAMI IS 3 HOURS AWAY FROM ME BUT HELL YEAH

What an absolutely necessary video to make.

I can’t believe how much it wobbles. Wonder if it wobbles this much with a G29 or something more entry level. I feel like I’d prefer a desk over this but you’d be a good judge of it

@boostedmedia

Жыл бұрын

The more effort you’re exerting to fight the FFB the more it wobbles. But it was still noticeable even with a g923 or R5. I said in the video that if you have a desk and some kind of setup where your pedals and chair won’t move, thats probably preferable.

@matthewwilliams5253

Жыл бұрын

ive had the GT Lite for 3 years, yeah it wobbles but good enough with the g29..

@drchtct

Жыл бұрын

had it with a T300, the desk setup was way better, way more FF detail on my desk

Man i just looked up next level the ws 2.0 has my name written all over it it solves all there problems i currently have oh yeah im buying that dude

As someone with a GT-Lite and a Thrustmaster TMX hard-mounted to it (Ricmotec's got a great adapter plate), I have no idea how NLR thinks this can handle a DD base with 13 Nm. It's a great product for entry level equipment (belt driven wheelbases in the 2-4 Nm range) but I can see it being any good for DD's over 5-6 Nm.

@tarushdei

Жыл бұрын

I actually asked NLR on their Insta about a possible upgrade kit for the GT-Lite and getting the pedal plate connectors and the forward straps, and they said they have no plans to offer anything. 🤷‍♂️ I *like* the product for what it is, but the price doesn't really reflect it, this as well. It's a smart idea but you can get a wheel stand for less and it'll be better for you. I'm going to jury-rig some straps on mine soon and see if that improves some of the flex (as I'm arguing with myself if I want a profile rig or will just stay with what I have, I'm going DD but not more than the CSL DD or R9). I may just sell the setup with my TMX and go with a profile rig, but I wouldn't buy one of these again. There's lots more options out there now.

@drchtct

Жыл бұрын

Totally agree. Had this for a T300 and it was way more flex than on my desk, so much FF detail was lost. I can't believe they trick people into buying this for a 13nm DD

I am going to pick this up today & hopefully I can build some parts with my 3D Printer to make it sturdier. I just don’t have the space for anything larger.

@R-py6uf

Ай бұрын

You are fine. The motor in the wheelbase rotates side to side, not forward and backward, and it's not going to move from side to side.

@dinosoarskill17

Ай бұрын

@@R-py6uf Yea it's been fine, i've been enjoying it

I have a Wheel Stand 2.0 and its rock solid, very heavy though lol

I am amazed it hold up too 12nm, Shows good engineering in the joints for that, With the weight of the wheel it's self on top, This would be for those tight on space or a funky wifie, lol.....

camping chair style. very cool

As someone that is limited with space I was really hoping this would be less flexible but I think I need to explore finding a way to secure my peddles under my desk. They're jammed so they can't move away from me but they rotate away from me when I'm braking.

@kevini4180

Жыл бұрын

Really recommend the GT Omega Apex

@Bmoncrief

Жыл бұрын

It’s not as much flex as you think. I just went from desk to this setup with a DD w/ load cell pedals and it’s night and day.

@F7INN

Жыл бұрын

The loading straps that you see being used during the folding up can (and should) also be used when it's unfolded to tighten other parts of the rig, so it will be less wobbly than in the video

@Remzly

Жыл бұрын

Im in the same boat. What i did was put a heavy rubber mat under the pedals, then stacked some weights ontop of the pedals wherever they fit. My pedals dont move at all anymore

Instead of straps, why cound't NLR use telescopic tubes with a locking pin? That could easily react to both tension and compression forces. For the price point NLR is asking, seems like there are few fundamental issues with the design choices.

I managed to get one for £30 on a facebook sales group and it was the best £30 I've ever spent

@LilGrabzy

3 ай бұрын

Insane

looks great, thanks for the video, how tall are you? the fit seems well for your size

@boostedmedia

Жыл бұрын

I’m 190cm and 95kg

Could you tell me which cockpit not too expensive to buy for a compatibility with the motion v3 i could buy later please?

Looking for a foldaway to replace my playseat challenge due to wheelbase flex on CSL DD, this looks just as bad in the first 5 seconds

The convenience of being able to fold it away isn’t always convenient lol it’s still kind of a hassle to put it away and set it up, I had the GT lite and I almost never folded it anyways since I played daily and the times I would fold it to make extra space I would go weeks without playing cause I didn’t wanna set everything up with all the wires and stuff. I ended up just getting a small aluminum unmarked rig off eBay that wasn’t to expensive and isn’t very big but it’s still solid. I set that up in a corner where it takes up the least amount of space, wall mounted a curved monitor and it sits perfectly in front of the rig. Not only does it look better overall it’s definitely a conversation starter whenever people see you have a whole corner that looks like an arcade lol.

@drchtct

Жыл бұрын

Had a similar experience. Returned the NLR GT Lite and got a Sim-Lab WS-Pro with a seat add-on, so basically a very light aluminium profile that is way more rigid than the NLR thing and still fits into a corner and is easy to put into place.

@Scotlandfromthesky

5 ай бұрын

Not the comment I wanted to see. I would need to fold away every night 😭

@dbzcollector9963

5 ай бұрын

@@Scotlandfromthesky yeah honestly it’s kind of a hassle to put away and put back up especially if you find a sweet spot where your sitting just right and the wheel is the right distance, the pedals aren’t to far or too close. Once you fold it up and put it away you’ll have to spend a good amount of time setting things up just the way you like it, unless you don’t care and just want something to sit in then it’s not that bad but it still takes like 10 minutes to setup even longer if you take off the wheel base and stuff to make it fold more compactly. The main thing I absolutely hated about these types of rigs tho is the support bar or brace that runs underneath your legs it use to kill my legs if I tried playing longer than an hour lol. Getting an aluminum rig and an actual car chair is by far the most comfortable way to race but again that’s only if you’re really into the hobby. If you’re a more casual player you know maybe do like 1 or 2 races a day or something then it’s tolerable but if you plan on playing longer than an hour save yourself the pain and just get an aluminum rig with a chair.

@Scotlandfromthesky

5 ай бұрын

@@dbzcollector9963 I'll need to have a think about it. Will be set up in my daughter's play room once she's in bed so it has to be able to fit in a cupboard 🤣 means the difference of not getting into sim racing.. unless we buy a bigger house lol. Thanks for the feedback bro, appreciate it!

Has there been any follow up from Next Level in regards to the mounting issue/possible solution? That flex is quite alarming!

I have gt lite and GT DD Pro. i made small wooden stand that connects to wheel stand and it doesn't move any more

I have the GT Lite with a Logitech G29 and its ok. My butt tends to fall asleep after about 20-30 minutes. Does the GT Lite Pro have the same issue? Is the GT Lite Pro worth upgrading over the GT Lite?

is the steering wheel plate sturdy enough for a 5nm fanatec wheel?

I would totally see the same design but in super strong carbon structure (like bikes). I would pay as much as a bike frame (~2k to ~7k).

If you have a load-cell pedal then this is a good entry and something that can moderately handle it, but... there's few buts: - I doubt that it can actually handle stronger DD bases. I'm using T300 and I can see it flexing a lot for what they advertised (even with those additional straps) - Now for the big "but", it really does struggle with load-cell. By struggle I mean it likes to slide around with you in it. I've tested it only for an hour and a half and I've noticed that I quickly end up turned to the left even though I started my sessions facing my monitor straight. It's a big headache considering I'm using only 65kg springs with like 65% braking force, so it's alarming how easily it can turn. Now granted there are probably better suited flooring for this setup than panels, but you need to keep it in mind that you might move around.

Great review, however I firmly believe that most buyers of this type of seat do not intend to use it with high-end pedal and steering wheel combos. Perhaps the feeling of lack of firmness is less noticeable with a mid-range steering wheel like the T248 or G923?? I would like some opinions on this....

@boostedmedia

11 ай бұрын

This was discussed in the video. Running at lower torque levels does reduce the movement proportionally but the wheel deck still moves around excessively IMO. It’s not a bad product. It just could have been better.

Hey, mind sharing the stiffer alternatives that are the same price?

In two minds now after seeing this review. I'll be a casual user with a moza R3. But absolutely has to be folded away. How much of a pain would it be folding away every night?

Could this be used for a flight sim as well?

I've had this one for a while, and even if it is better than sitting in an office chair, it's really not great. Folding it up is such a chore that you will have it unfolded anyway if you race regularly. It's wobbly af and quite honestly, just get a rig. I ended up doing that after a big move and it's night and day.

@J03130

Жыл бұрын

pretty sure when this video released the embargo for the product was lifted so whatever you have it isnt this.

@KayRoepke

Жыл бұрын

@@J03130 its essentially the same thing, but yeah

@Dontfeedtrolls96

2 ай бұрын

But not everyone has enough free space for a full permanent rig.

I'm so torn on this. I don't have the space in my apt for a full rig, but I don't think I'll be able to stand that flex for this rig. Any suggestions?

This needs to go on sale. 200$ I'm sold

@TheColdest247

7 ай бұрын

Agreed! Considering it's only a few months old, it'll probably be a while before you see a sale. I just got lucky and snagged one up on facebook marketplace that was barely a month old and already put together for $180 so I didn't even have to bother with that part. So yea I'd check marketplace, and who knows you might get lucky like I did.

Does it not have an F1 position like the Old Next Level cockpit was able to get to??

On all web cite is show with the whils padels and shifte but is not sold with it?

That thang is TWERKING 😂

Is this cockpit compatible with Thrustmaster T248 and TSS handbrake sparco mod +?

Are there any more stable options out there that stow away decently well for a VR setup? Thinking of something that could tilted up easily for storage, but does not need to fully fold away and would have a fixed seat (i.e. avoiding the options that attach a swiveling office chair).

@hby7768

Жыл бұрын

oplite nitrokart, you can hang it on the wall.

@Tiger1016.

Жыл бұрын

@@hby7768 Thanks for the tip. This idea is heading in the right direction. I would rather avoid the karting oriented seat and position. I'm in the US and this company's products don't appear to be available here anyway.

@hby7768

Жыл бұрын

@@Tiger1016. i got it ship to california from Europe for $70

so I have the thrustmaster t248 would the wheel still mount with this?

If they had just increased the price a little bit more to solve some of the flex this would be a very solid option!

@plty3931

10 ай бұрын

bro I have this seat at home and trust me when i say this, it works PERFECTLY FINE. Even if it migjt move about a bit, i rarely ever notice it, and when i notice it, its very negligible and if u are focused on the racing u wouldnt even know 😂😂 So yea its definitely a good option if ur looking to buy it. Just wanted to make an authentic review as a user of this product

All the folding cockpits are a compromise I personally have a playseat challenge which I heavily modified to get some rigidity out of and to fix the horrible pedal box system but I love it now and I can pack it away into a very small space

@PIDOFREAK

Жыл бұрын

What mods did you end up getting?

@petercirincione5710

Жыл бұрын

​@@PIDOFREAK i made a brace for the wheel base mount, I made a new pedal support from aluminum profile, and I machined a h pattern shifter mount. Maybe I will post a video about the mods I made some time soon

@PIDOFREAK

11 ай бұрын

@@petercirincione5710 Yes that would be nice!

How does this compare to the play seat challenge?

I have a question 🙋🏾‍♂️ would the csl elite racing wheel fit on the base of this rig?

Well what sould you get if you want something that doesnt move as much for the same money

Quick question what would you say is probably the best wheel base in terms of smoothness and force feedback that’s compatible with Xbox?

@J03130

Жыл бұрын

ts-xw

@24:57 Would have been helpful if you mentioned what some of those other options are.

Wow, blows my mind that they added a pair of useless straps instead of adding a metal detachable shaft to connect the underside of the wheel base to the front legs of the chair. Even mounted on the side instead of between the legs it fixes all of the flex.

remember u can always buy some steel pipe and weld support for the base plate and weld it to the chassie... boom u prolly added about 10-15nm xtra support and there will be next to no flex

@boostedmedia

Жыл бұрын

Yep that’s what I was thinking. Once you have your angle how you like it, welding time

@diszturr7009

Жыл бұрын

@@boostedmedia Welder icluded*

I am in the market for my first SIM racing setup using Ps5. Mostly to play ACC. I need something that folds but not as flimsy as this. What else would be your recommendations? I am looking at a Fanetec DD pro 8nm bundle

@dragon2knight

Жыл бұрын

See my post on here for the option I went with for exactly that setup 😊

@F7INN

Жыл бұрын

This is the least flimsy of the folding options

Great video. My question is, to anyone that can help, my only experience of wheel setup was Logitech G920 (I think that was the model number)… anyway I didn’t last long with it cos my shoulder is not 100% and I got aches pretty bad even with the settings for force feedback low. Would a more expensive DD wheel, dialled down on the force feedback which would help my shoulder, actually feel more enjoyable than the logitech wheel and would it be a case of this DD wheel feels real life compared to the Logitech?

@loukas371

Жыл бұрын

If the Logitech was too much for I don't think a DD would be a good idea. You could probably make it even softer to use than the Logitech but then you're really not getting what you paid for

@cptnalgren

Жыл бұрын

@@loukas371 yeah you're right, it does somewhat defeat the object, was just hoping for a way to play with wheel again and a sense of realism. Dialling down the force feedback kills that.

Possible to mount inverted pedals ?