On Amazon: *ALL-TOP COMPRESSOR: amzn.to/32lZH9N *ARB COMPRESSOR: amzn.to/3p7IsCL *SMITTYBILT COMPRESSOR: amzn.to/3l5VhuV *CLIP-ON TIRE CHUCKS: amzn.to/32ofHZ0

Great review / comparison of both air compressors! I run the all-top and I love it! I've reset a bead for a UTV on the trail with it and been using the heck out of it since I got it! super impressed! Loved to see the comparison between the two! thank you!

A thoroughly precise and accurate, no nonsense review!

@NoNonsenseKnowHow

3 жыл бұрын

right on! Thanks for the feedback man

thanks for the heads up on the connectors and threads being different. deal breaker for me. has to be compatible for changes. great video ! saved me the hassle and much appreciated that you made the vid.

Just got one today, the problem or worry that everyone is having about switching the nipple to an American standard nipple is OVER! They now include an adapter that just pops right on! No going to the hardware store to find threads adapters or anything! This thing is powerful, fills fast and not too bad on the ears! I will say the gauge does suck as others have mentioned…. Anyone know if the gauge has a common pipe thread, or is the a replacement gauge?

Hey you probably worked this out by now, the air fitting is nitto, it's the standard fitting here in Australia. Great video by the way, thanks man.

awsome review. I have the same type as that alltop and still runs great. I had to get a different adapter for the quick adapter attached to the compressor.I believe they call it a type L or something. changed it out and now I can use the normal quick connectors like yours. Sure wish i didn't have to use the flowthrough adapter when filling as it would be nice to be able to use a digital gauge while filling.

@NoNonsenseKnowHow

3 жыл бұрын

Thanks man and awesome. Good to hear yours is still going strong. Haven't had any problems with mine either yet although I haven't used it since this video LOL. And yeah definitely swapping out the connector is a must

Did some quick searching and the oem fitting looks like a high flow BSPT and is bored out a lot bigger than a standard T style NPT. Mine came with a small adapter hose that connects to the compressor and has a T style male fitting on it.

Good comparison, thanks for the video.

@NoNonsenseKnowHow

2 жыл бұрын

No problem, glad you found it helpful

Thumbs up 👍 good walkthrough 😀

Is it true that the cylinder head fins are plastic and not aluminum? I read that on a review but it just seemed odd.

I did the same with my Harbor Freight compressor, cut the end of the hose and put a standard female end on it. It makes it way more versatile!👍

@NoNonsenseKnowHow

3 жыл бұрын

How do you like the Harbor Freight unit? Do you know what the CFM rating is on it?

@MyDIYAdventures

3 жыл бұрын

I don’t know what the CFM is, I grabbed it a few years ago before a wheeling trip. It’s great for the quad and the dirt bike, but if it try to air up all four 33’s on the Jeep, it takes forever.

@NoNonsenseKnowHow

3 жыл бұрын

@@MyDIYAdventures got you. I'll have to look them up. I didn't even think to check Harbor Freight. And yeah they are definitely handy to have! I like my onboard arb n the tundra but I needed to get something for the Ram

The best part about the ARB, you can rebuild it for about $50 when it starts wearing out. I like that it's not a throw-away product. Mine started blowing fuses and running hot. I bought the piston kit, installed it, and it's like new.

@NoNonsenseKnowHow

2 жыл бұрын

Yeah very true! I actually just did a video on my other channel taking my apart and fixing it. They even warranted the parts and sent me them for free

@fitzventure

2 жыл бұрын

@@NoNonsenseKnowHow Gotta love that.

@NoNonsenseKnowHow

2 жыл бұрын

Heck yeah! Great customer service

I like your presentation. You have a talent for it. I would like to know where you got the SS air tank and how much time does that decrease your inflation time for a 4 tires.

@NoNonsenseKnowHow

2 жыл бұрын

Thanks. And I got the stainless tank on eBay. It doesn't really change the time to inflate all four tires very much.

Now I also wondered if a 12 volt compressor was a good idea mounting in the engine. Now I know thanks !!!

@NoNonsenseKnowHow

3 жыл бұрын

It's definitely the most convenient spot that I found. However if you were going to run it for an extended time you would definitely want to heavy engine hood open to allow cool air in there

@BobSmith-dm3vp

3 жыл бұрын

@@NoNonsenseKnowHow I ran some wire from my battery and keep mine behind my seat.keeps it clean etc

@BobSmith-dm3vp

3 жыл бұрын

@@NoNonsenseKnowHow I also took mine apart and put a heavier set of booster cables because the wires would get hot and ran 3 feet of insulated hose from my compressor

@davewallace718

2 жыл бұрын

@@BobSmith-dm3vp Good idea ...

EZ flat has and adapter they sell for this. They told me it was the Nitto adapter. I haven’t done it yet though. I was looking at the gobege compressor which looks similar

@NoNonsenseKnowHow

Жыл бұрын

The gobege is pretty much identical. I actually did a review video on that one as well on my other channel

Thanks for the video, nice job. So now that you've lived with it for a while have you had issues? Would you consider doing another test of the All-Top with the engine running?

@NoNonsenseKnowHow

3 жыл бұрын

No problem and thanks man. I haven't used it since this video so I couldn't really give an updated opinion at this point. May do an update in the future though. It would be slightly better with the engine running

@dirtylu79

2 жыл бұрын

@@NoNonsenseKnowHow curious why you perfer to use a slower compressor? Im gonna add this to a puma 12v, 3.4cfm

@davewallace718

2 жыл бұрын

@@dirtylu79 Could be it's already paid for ?

Can you give a long term review on the ALL-Top air compressor? I deciding whether to go with this model for my Jeep Wrangler JL or stick with ARB for more than twice the money. Cheers!

@NoNonsenseKnowHow

Жыл бұрын

It's been good so far. No problems yet

Since you have to turn the compressor off to get a reading from the gauge, shouldn’t the gauge be located near the compressor. Than you don’t have to walk back and forth to check your reading. Am I overlooking something or did they overlook that.

@NoNonsenseKnowHow

3 жыл бұрын

I mean I think it works fine the way it is. But yeah I see what you're talking about. Truth is, once you're used to using the compressor you will be able to know what the pressure is without turning the compressor off

@NoNonsenseKnowHow

3 жыл бұрын

Or roughly anyway

End of video you show your front bumper set up. Did you attach after you bought truck. Would you buy differently Have you ever hit a deer?

@NoNonsenseKnowHow

3 жыл бұрын

Yes I added the guard and the winch after I bought the truck. I'm happy with the setup. If you look up NoNonsenseKnowHow tundra winch then you will run into a video I did showing the basics of how I put the winch on. Are you talking about the winch or the guard?

@johnyb9884

3 жыл бұрын

@@NoNonsenseKnowHow the guard, but the winch too. I’ll check out the video. I hit a deer in Montana in a rental grand Cherokee jeep. Now I’m wanting a guard for my 2006 GMC pickup. I really like your videos. Very informative

@NoNonsenseKnowHow

3 жыл бұрын

@@johnyb9884 oh got you. Yeah definitely a good upgrade! Might not save the vehicle completely but at least give it a fighting chance and will hopefully keep deer from going in the windshield. That was the main reason I installed one. And thanks man I appreciate you checking out the videos

Which one was quieter?

@NoNonsenseKnowHow

2 жыл бұрын

Pretty much comparable. I would say the ARB maybe a little bit quieter

Maxi trax by napa has dual head for 115 out now

@davewallace718

2 жыл бұрын

Yes. It would be nice if they had any in stock anywhere tho. It's a NAPA brand basically and they have been out of stock for months

@davewallace718

2 жыл бұрын

The Maxi Trac is quite an awesome machine

The orange one is a direct copy of the t maxx compressor which is made from monkey metal you can’t fit any other ports into the head on side is the intake the other is out put plus the a r b spare parts are readily available for the compressors

1/4" NPT Female to M12x1.0 Male adapter

Viair portable air compressor is the way to go.

@NoNonsenseKnowHow

3 жыл бұрын

Which model? I was looking up the specs on their comparable models and they were half the air volume

@yjdriver7432

3 жыл бұрын

@@NoNonsenseKnowHow 400p automatic shut off 33% at 100 psi. 2.3 cfm good to 35inch tires 30amp draw

@NoNonsenseKnowHow

3 жыл бұрын

That's great that it has auto shut off. But that's even less CFM than my ARB.

@NoNonsenseKnowHow

3 жыл бұрын

@@yjdriver7432 the alltop has 6.3 CFM

@yjdriver7432

3 жыл бұрын

I agree its less but it sure seems pretty quick. Ill have to do a 0 to inflate time and let you know. But it has normal fittings and just much better quality build and comes with spare air filters basically everything you didn't like it has hahaha. Just a fan of there products I was going to buy the all top because of price but I'm glad I went with viair

I don't think that design language is a Chinese manufacturing thing, as much as general industry chosen design principles lol. Interesting seeing where this one falls though. Points to consider

@NoNonsenseKnowHow

3 жыл бұрын

I dont understand

@NoNonsenseKnowHow

3 жыл бұрын

I don't think you understood what I was trying to convey.

@MaddJakd

3 жыл бұрын

@@NoNonsenseKnowHow More than likely lol. Can make a wrench so fancy before it's not a wrench lol. For the overall intended useage, that was the chosen basic form, was my take anyway.

Mine came with a standard(American) air tool fitting, 08/2023. It’s also much quieter in person than this video makes it sound.

@NoNonsenseKnowHow

11 ай бұрын

Nice! Sounds like they made some upgrades

I dont understand why you waste your time if it is price based comprasion .. we know the result from the specs. if you want to compare the performance of two devices they should close in the specs. so you should compare it with the twin ARB pump

@NoNonsenseKnowHow

3 жыл бұрын

I bought the pump because I got a good deal on it. I decided to make a little review video since I was doing it anyway for personal reference. It didn't find it useful it is what it is.

thats not an air compresser,,,its a wheel pump

@NoNonsenseKnowHow

2 жыл бұрын

It compresses air

@craigbutler623

Жыл бұрын

How do you pump up a wheel? Maybe a tire pump?

ITS NOT AN AIR COMPRESSER,,,,ITS A WHEEL PUMP