All new DNP WCM PLUS review
ALL new WCM Plus review by PBXREX (is it faster?)
Do you love wireless printing but are tired of random disconnects and lethargic print speeds? Well say no more. Looking to replace that ex, look no further, the WCM plus is here.
The all new PLUS from DNP is the solution to your woes. With an all new hardware architecture, they now have improved stability and blazin fast print speeds. 200% faster over wireless and 400% when wired. Checkout full review and setup tutorial here.
#DNPambassador
#WCM+
#WCMplus
#wiredPrinting
#wirelessPrinting
#howtoconnectWCM
Пікірлер: 72
Thanks for sharing! I was wandering if you could do a review of the WCM plus with a windows laptop. I have the RX1 HS, a Canon 1Ds mk iii DSLR and CamFi wireless transfer from camera to laptop as I am thinking about a 1 person setup. I am know that the WCM plus works with the HOT FOLDER from DNP to print automatically, as soon as the picture is taken. I do prefer a wired connection of hardware apart from the camera for health and safety reasons.
Great video! Is there a way to connect to your iPads LTE/5G to share images online while connected to the the ethernet hardwire?
That's awesome!
Hey Rex! Thanks for sharing! I followed your video on this. I "updated" my WCM2 about 5 months ago and I'm wondering if the updates are similar to the PLUS? Or should I look at just buying a plus?
@Rexsphotoboothreviews
8 ай бұрын
Great question. The interface is similar so that’s a plus. But the real difference is in the speed for processing prints and that’s due to upgraded hardware and DNP building plus from the ground up. Processing a print on WCM2 is 19 seconds. Print processing on a plus is 7-9 seconds. It’s almost 3 times as fast. Buying a plus eventually is the way to go. Can keep the WCM2 as backup or home use
Hi,may I want to know at 22:08 second ,the iPad’s shows “tap to start” picture,that could be customized? or that is an app? and want to know how to add design frame to ipad? Thanks you
@Rexsphotoboothreviews
5 ай бұрын
All Photo Booth apps allow you to insert a tap to start screen
Hello! I run salsa booth with dnpw2, So Slow....! Can I har wire the plus to the iPad and still connect to wifi from texting and email?
Hi Rex, great video. I was trying the ethernet solution with a J5 create to Apple lightning, but it did not seem to work. What adapter are you using for the ethernet solution? Thanks in advance.
@Rexsphotoboothreviews
7 ай бұрын
If you have USB C use this ethernet adapter. Will also allow you to charge at same time. amzn.to/47VOTOU
One question: If the WCM Plus is selected for your iPad’s Wi-Fi connection, how does your iPad access the internet to set up the printer?
@Rexsphotoboothreviews
9 ай бұрын
Your WCM plus works as an access point. You connect the Plus to your WIFI.
If my ipad is connected to the WSM, can I connect through the venues WIFI still through the WSM application? If not virtual sharing would be cut out. Sorry if I missed that part in your video .
@Rexsphotoboothreviews
5 ай бұрын
It connects thru the WCM applicatoin
I love how the cube has an option to plug in USB to power the wcm! Also, love that new data that shares about the number count and info. This is a new feature right?
@Rexsphotoboothreviews
9 ай бұрын
Yasss the print count is new. The USB port is not recommended for WCM plus as it may be under powered. Buy can be used for phone charging :)
Hello Rex, using photobooth software can you print as well as sent text messages while hookes up to WCM Plus
@Rexsphotoboothreviews
8 ай бұрын
Yes, if you have an internet connection, you would configure WCM to send out.
@TheCrooked80
5 ай бұрын
Do you have a video on how to configure WCM to send out text?
Impressive🎉 as always Rex🤙🏼
@Rexsphotoboothreviews
10 ай бұрын
I c U. Your channel is FIRE!!!!!!!!
Great video Rex, question. Will it also prompt 2x6 prints?
@Rexsphotoboothreviews
Ай бұрын
Yes, WCM plus has the drivers for 2x6
Great video! Quiestion bro , i just installed it yesterday, connected my ipad to wcmplus hotspot, went on the IP selected the printer (i had a wcm2 so i just did the same steps) but when im in lumabooth and try to print a test page it says "please configure printer before printing" it dosnt let me print, i tried reboting, restarting, openein the IP again choosing the printer again and nothing, do you know what can i do?
@Rexsphotoboothreviews
7 ай бұрын
You can call dnp, and they will walk you through it. It’s absolutely free. 800-814-4672.
@tomasb.v.8216
7 ай бұрын
@@Rexsphotoboothreviews I have the exact same issue. Connected wcm to my wifi network, and the ipad to the same network, I can print from photos app via airprint, but from Lumabooth it does not print, and wen trying to print test page it says the same "please configure printer before printing". Any idea how to fix?
Is there any way to adjust the output...color/brightness/hues/ etc.
@Rexsphotoboothreviews
9 ай бұрын
No color adjustments, the plus is calibrated for dnp printers so they are pretty close if not dead on
I want to buy that server. How can i buy it? Im from Philippines.
Can I plug a Canon R6II directly into the WCM Plus then use the Ipad to see the images and print? Does this come with Party pics software? Thank you
@Rexsphotoboothreviews
9 ай бұрын
It is compatible with DNP Party Print which I believe is a subscription. The WCMP plus uses the airprint protocol which the R6 does not use. You may be able to connect r6 to an ipad connected to the wcm plus to print. lots of software options in between, but NOT directly to.
@cperkin2
9 ай бұрын
@@Rexsphotoboothreviews Thanks, I'm looking to do volunteer Santa pictures and would like to limit the equipment needed. What are the USB connections for? I see the USB 3 jack on the side. Can I connect a camera to that port? also how much archive storage is on the WCM Plus?
@Rexsphotoboothreviews
9 ай бұрын
@@cperkin2 the WCM plus doesn’t work that way. Your best bet is to connect to a windows pc
Why not use the USB3?
My WCM plus is not connecting to my hotspot would you happen to know what is causing this issue?
@Rexsphotoboothreviews
3 ай бұрын
Lets fiesta, lets get that taken care of for you. DNP Support at 1-800-814-4672.
Good morning, I am in France, this product does not exist on the DNP Europe website. For what ?
@Rexsphotoboothreviews
6 ай бұрын
You may try calling DNP: USA for a dealer 1-800-814-4672
… we can’t still print partial matte with the server it really bothers me. And it still lacks of a good ergonomic. . I hope it’s not too buggy like the WCM2. And i still don’t understand why they can’t power the server from the printer
@Rexsphotoboothreviews
3 ай бұрын
USB c requires more power than micro usb. So cannot be powered by printer.
The aircastpro 3 seems to be a better deal as a print server for the dnp printer . Have a look
@Rexsphotoboothreviews
3 ай бұрын
Oh absolutely, check out this video here kzread.info/dash/bejne/o2mLy9uLks2oYZs.htmlsi=zawqJeH0iWpMFK4v
Where to purchase?
Can I print photos directly from my iPhone?
@Rexsphotoboothreviews
2 ай бұрын
Yes, you can print from your phone. Watch this. kzread.info/dash/bejne/mqiirKuOcqqrdso.htmlsi=Txq7fpFDfVSQpuu5
Can you USE with other printer besides DNP and direct SD card
@Rexsphotoboothreviews
7 ай бұрын
A WCM is configured for DNP only. Will NOT work by inserting SD card. The software is on the original SD card so you cannot remove the sd card in there.
@loosestudios
7 ай бұрын
Thank You
I can’t login to the wcm page. Does anyone know username and password?
Hello sir, I am a photographer from India, I have to make a photobooth, I have only a DSLR camera and a DNP printer, I need your help in making a photo booth or I also need an app.
@Rexsphotoboothreviews
10 ай бұрын
Awesome!!! Pls email me. Rex@photoboothbizconference.com
Where did you get the adaptor from to plug in the Ethernet and Charge the iPad at the same time? Would love to grab one also!
@Rexsphotoboothreviews
9 ай бұрын
Here are all the products listed here. kzread.info/dash/bejne/mqiirKuOcqqrdso.htmlsi=Q2EvdOEuejC503gR
5pm, Rex's we need help with our ipad to wcm plus
@Rexsphotoboothreviews
3 ай бұрын
How may I help?
@StephenPerperian
3 ай бұрын
We got it , but confused on how I can do prints using Ethernet cable incase I don't have wifi. I have a ipad and wcm plus, do I need a special adapter? Also is there a adapter I can use to charge ipad and split and power another item? Thank you so much.
@Rexsphotoboothreviews
3 ай бұрын
Yes you need Ethernet adapter. Here you go. amzn.to/3w7M6VH
@StephenPerperian
3 ай бұрын
@@RexsphotoboothreviewsRex's you are the best, Thank you
If you can print from photos app on iPad and it works, then the issue is most likely with Lumabooth. Printer works, WCM plus is working, so that leaves…. #luma
Your intro music is way too loud. Please match the audio levels to your speaking audio. Thank you for the tutorial.
@Rexsphotoboothreviews
8 ай бұрын
Absolutely, I have been able to get microphones and edit audio as well. Checkout some of my new videos. It’s a world of difference
Who carries this and what is the price?
@Rexsphotoboothreviews
10 ай бұрын
DNP resellers will have this. No price listed at this time.
@edaltounian7118
10 ай бұрын
Not available yet... unless you're Rex!
If this is $199, I'm in! I guess we'll see. Nice review! 👍
@Rexsphotoboothreviews
10 ай бұрын
Fingers crossed!
@edaltounian7118
10 ай бұрын
@@Rexsphotoboothreviews That Pi model sells for $90 plus a $10 plastic case. Plenty of profit at $199. Plus there's a guy who just released the code to build your own on the lumabooth page. Same speed. I'd rather not have to learn Pi code, but price will be important.
@edaltounian7118
10 ай бұрын
It IS $199 and mine shipped out yesterday! Definitely going to be watching this video a few times to make sure I get it setup right.@@Rexsphotoboothreviews
@simonriggs
7 ай бұрын
@@edaltounian7118 do you have the link to the page with the code?
This is like watching snails screw!