I'll be honest, arrma did real good with this mojave release. That white part on the plastic, might be able to be brought back to life with some silicone spray. I would scrub it with a clean scotchbight pad, and then soak it down with the silicone spray. Let it sit for a few hours. The dry plastic will soak in the oils and not be so brittle.

@RC4us

9 ай бұрын

the did a fantastic job i think ive never liked a short course style truck until this one its awesome an is super tough ive got about 6 packs thru it an not a break yet i did do some tuning to rear shocks they was just 2 soft for me

She rips! Just a beauty RC! Good for you Mike!

@RC4us

9 ай бұрын

now to pick up my grom

Luv that poster in the background. Where did you find that because that’s a sick picture?

@RC4us

5 ай бұрын

My local hobby shop gave that to me

I don't know why Arrma only applied center differential now! Anyway this Mojave 4s looks great! I enjoyed the video, friend!😀👍

@RC4us

8 ай бұрын

Thank you yeah I think it’s because they’re a lot like me as a basher I don’t have to have a diff a slipper is plenty good for me… the difference can truly only be noticed at a pretty high level of competition car…. You can tune a slipper just like a diff an they’re a lot cheaper in the long run…. Now when I raced off road buggy it was really nice to be able to switch between the 2 center diff works great in high traction but when it’s loose I much rather have a slipper…. But now I bash so whatever it takes to SEND IT!!! But I do like it an it works so good in there that I wanna do a build using one in typhon 3s or something a bit more custom lol Thanks for stopping by an watching my vid

The body posts getting jammed in was when running on very loose sand, the sand/stones get packed into the post holes.Jamming the posts into the holes, probably not an issue if you dont run on to sandy areas.

@RC4us

9 ай бұрын

no ive ran 6 packs an i have no isssues like @dorc was having an my next video will show all the lose dirt an gravel but after a few runs the holes break in i choose to leave mine alone to see what happened an as i suspected was ok.... now in the front the bumper gets hung up on the inner grill... ive had zero issues with mine

@gillian9178

9 ай бұрын

worst body sticking was Earl Moorheads video, he had to use a hammer & punch to drive the pins out from umder the chassis. He couldnt pull the body off at all untill he got home, this could be a potential problem if the truck started to smoke, Arrma are aware of the body sticking problem now as they reached out to Earl.@@RC4us

@Krapper515

9 ай бұрын

Yeah mine broke in after about 4 packs. It still has some tension but one good shake and it pops right off now. Some times harder than others but not as bad as the first 1-3 runs. Now I've put around 14 or 15 packs through it and it's been unbelievably fun every single run with no issues aside from the center driveshaft (rock got stuck and melted right through, same as the other 3S and 4S trucks have had issues with) but that was as easy to fix as swapping the battery. And cheap. This thing has been an absolute beast where I live

@RC4us

9 ай бұрын

@@Krapper515 I agree I have a question is your center driveshaft loud mine seems like the bearing isn’t sitting tight

@Krapper515

9 ай бұрын

@@RC4us I'm not sure where the noise is coming from but I agree. The bearing might be the source of that deep wirring noise we all hear on our Mojaves at high speed. Mine does make that noise but I didn't think about that being the issue! But yeah, mine does make a noise too. Just might be shaking around on that plastic bit

awesome truck Mike i love it congrats . I think we have a 4s typhon comig soon well i hopr anyway lol but your right theres more to go with that chassis

@RC4us

8 ай бұрын

Fireteam 4s

Awesome video brother ❤ I'm a short course man but never found one I liked. This might be it 🤞

@RC4us

9 ай бұрын

Well I’ve hated everyone I’ve ever driven until now an this things amazing

so if was choosing 1, what would it be Kraton 4S v2 or This? I own a Kraton 4S V2, but debating this RC. If i DONT buy this RC, will invest the money into my Kraton for upgrades, or my Losi DB Pro...Only have so uch cash to put into RC.

@RC4us

9 ай бұрын

It just depends on what you like to do not saying the Mojave doesn’t jump well but it is a short course truck an not a purpos built basher like the KRATON so if your sending it definitely get the KRATON if your just ripping around with mild jumps Mojave is AWESOME

Needs DX3 Controller with gyro, at price point per losi DB Pro. Also will need to drill the body post holes so body removes easily. Also after 2 to 3 packs of B2B play, you will notice the servo is gonna need a upgrade. Cant keep sending 7.4 volts to a 7.2 volt servo long, before issue occurs.

@RC4us

9 ай бұрын

It handles fine no need for gyro I’m ok with the price with all the newer updates over the other 4s well worth an theys wouldn’t have set it at 7.4v if it wasn’t ok I’m 6packs in an no body issue I think that isn’t even a real issue as it wears into place really fast all I’ve done is thicken rear shock oil

@Krapper515

9 ай бұрын

I thought so too but I can say about 14 packs later and I don't think it needs a gyro at all. It goes where you want it to every single time. And nope, no need to drill or anything. Mine broke in about 4 packs through. Still a little bit of tension but a good shake gets it off every time. No issues with my servo yet either! May be speaking too soon but considering other people are having issues 2-4 packs in and I've put about 14 or 15 in, I don't think it's a problem with mine specifically.

What kinda runtime are you getting with those batteries?

@RC4us

8 ай бұрын

The cnhl 8000mah 40-50 minutes 20 on the power hobby

@RC4us

8 ай бұрын

Also a promo code for another 15% off amzn.to/49CYagJ

Are the 4s shocks as good as the 6s shocks for the 4s platform? Meaning, the 6s shocks are great with little complaints for about 7 years now but we all know how bad the v1 4s shocks were.

@RC4us

8 ай бұрын

Once they switched to the aluminum option those are super good an they make these exact shocks as option parts for all the 3s cars only real issue with the 3s line is how the rod would pull out of the perch/eyelet from being pressed in an not threaded… but yeah any of the aluminum shocks are great

@williamperri3437

8 ай бұрын

@@RC4us so they do have them for the 3S line now? A thinner aluminum shock body made by Arrma? I bought the heart racing shock bodies in 2019 but they were actually for the 4S line and didn’t fit well.

@RC4us

8 ай бұрын

@@williamperri3437 hot racing suck they still use the biggest problem the pressed shock shaft... arrma has offered the upgraded ones for the 3s cars b4 a years b4 the 4s cars even came out with them pick your car granite typhon bigrock an scroll down to option parts an arrma makes a ton. of parts

@williamperri3437

8 ай бұрын

@@RC4us Yeah, I stopped with Arrma 3s line other than the Typhon in 2019. My Typhon has metal DHK shocks and a few other upgrade it still one of my all-time favorite Rigs.

@RC4us

8 ай бұрын

@@williamperri3437 i use to have one i like the 6s typhon the best

?? Did u say that we r getting 3s and 4s exb rc cars??

@RC4us

9 ай бұрын

Well I said that I think that with all these new parts label EXB an the fact we haven’t had a update in years on the 3s line most still using blx esc an not spektrum that I think maybe a EXB 3s line is next but also think maybe a 4s FIRETEAM would even be cooler

@lukerecore

9 ай бұрын

@RC4us Oh ya dude that would be fucking dope.

@RC4us

9 ай бұрын

@@lukerecore yes it would I keep tell Jason dearden that too lol maybe he will listen lol prices would go up but I think if the would have a standard version an a EXB version of them an just do away with the mega line basically replace it with the EXB

@smoothwookienookie5912

9 ай бұрын

​@@RC4uskeep up the good communication. I think a revamped exb 3s line with center diffs would take over the market, would be awesome. Also tell Jason to make a 1/5 gorgon lol

@RC4us

9 ай бұрын

@@smoothwookienookie5912 right on I would love to see a 4s fireteam that would just be epic

And I was looking at cnhl batteries for a while now, but all of the sizes r to big for my outcast 6s battery tray. And I was looking at the 6200mah, nevermind the 8000.

@RC4us

9 ай бұрын

I run 6s cnhl in my outcast 6s I’ve recently only started running it on 4s as 6s in that short wheelbase is insane the way mines set up

@lukerecore

9 ай бұрын

@RC4us But what mah?? Ya I could buy a couple of the 5000mah, but I have 2 hrb 6200mah 100c 6s and they r shorty packs

@RC4us

9 ай бұрын

@@lukerecore I run the 6200mah 90c CNHL 6s packs they been AWESOME pretty much any video from this summer is running a CNHL I can’t leave pictures here but here is a link to Amazon for the ones I run amzn.to/40iCCBK