Boss I will give you two quick tips for this ignition. On that year Chevy the ones that use the Z keyway. You do not need to remove the bottom half of the shroud and the tilt steering wheel lever. All you have to do is remove the top of the shroud. The second tip is you don't need to pry the metal band around the ears. Just take a flat blade screwdriver and a hammer. Just tap the ears in a few places and the ears will pop off without any damage. The rest of your example is good. I am just trying to save everyone time. Keep up the good work

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Thank you for watching and for you great advice !! You are appreciated!!

@eddcolocho6321

2 жыл бұрын

Does the 2009 chevy malibu have a side bar?

@mariaalonso2499

Жыл бұрын

@@eddcolocho6321 its the same procedure

@donniedarkko94tm17

Жыл бұрын

Hey Kenny by any chance you a know where I can get my hands on a B111 circle + sign to be a able to cut the key with a A puc a punch

I made a set of the "jiggle" keys for a B102 key today (1999 GMC), and it worked like a champ, appreciate the videos you do man. That little tip really came in handy for a someone who is still learning like myself.

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Right on !! Im really glad it worked for you!!! !!👍🏻👍🏻👍🏻👍🏻

@outofsight1hernadez3

2 жыл бұрын

Did you use the 4.2 that he was talking about

@fxbgkeys

2 жыл бұрын

@@outofsight1hernadez3 I did at the time, not anymore.

@guatsquad

2 жыл бұрын

does anyone have the key code for the jiggle key

@pouncerminned863

Жыл бұрын

@@fxbgkeys what do you use now?

He said “that’s it, charge a good $350.” 😂 respect the hustle.

@jamescc2010

Жыл бұрын

Great. That took work, know how, and skill.

Man you just saved my life today bro. I have a key but it stopped turning the ignition, I found a small piece of metal to push up the side bar under the key and it turned right on! Thank you sir

Hell yeah this is what I need. This is the video I have been searching for 👍🏾👍🏾👍🏾👏🏾🙌🏾🙌🏾🙌🏾😃 can I use this method of finding the key code on any vehicles like Ford, Mercedes, vw, skoda, Toyota, Nissan, etc??? Thank you again this is giving me hope that I don't have to mess with the lishi picks

Your videos are so so helpful! I've been doing lockouts for years and I just decided to start making keys. I bet it's a dopamine rush when the engine fires up with the key you made!

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Hey there!! Yes its a quite Pleasant feeling you get!! Its more like a feeling of accomplishment!! That feeling keeps you motivated to seek for more!!

I noticed you had a lot of jiggler keys. I thought there were only two? In the other video, you made two jiggler keys only. Great video, very educational

@dansal938

Жыл бұрын

Look forward to your answer

@MYKEYSAUTOMOTIVE

Жыл бұрын

I have a few some i bought , and some i made !! I have some for ford ,freightliners and chevy gm .. for simple wafer locks

Thank you so much I was able to replace my ignition finally!

@MYKEYSAUTOMOTIVE

8 ай бұрын

You're welcome!

Wow $350? I would offer 75 dollars and they still wouldn't call me back

@MYKEYSAUTOMOTIVE

Жыл бұрын

🤣🤣🤣

@555666jyd

Жыл бұрын

Damn

Follow to the T.. by far the fastest way, to the T.. Thanks for Video

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Thank you for watching!!

Great video as always!

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Glad you enjoyed!

Another great video the guys a genius 😂

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Thank you Gary!!!!

Good stuff bro!!

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Thank you thank you!! 🙏🏼🙏🏼🙏🏼

Great job man!

@MYKEYSAUTOMOTIVE

Жыл бұрын

Thank you sir!❤️❤️🙏🏼🙏🏼

I definitely had a kid disconnect the battery today, did not even think of putting it in reverse LOL.

@MYKEYSAUTOMOTIVE

2 жыл бұрын

ahhaa

I believe Ive got a sidewall issue. Thinking about replacing the entire Cylinder Lock but came across your Ignition Lock Cylinder Replacement/Fix video, where you made a new key and showed the sidewall to slide down. Should replace the Ignition Cylinder Lock or just cut a unprogrammed key to see if the sidewalls slide down?

Nice video thanks for sharing

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Glad you liked it

I’m wanting to make a few. Where do you get the information on what cuts to use? I’m mainly looking to make a dodge one

Hey very informative video thanks for sharing…. I have a 2011 Chevy Silverado that I still have my key, but it will not turn….. it had been giving me fits but if I did the little dance and jig with the steering wheel & key it would turn. Well my dad and I just recently did a brake job on it, and went to crank it and no matter what- no luck. I have a couple questions: being I have a key-albeit worn- could it be used as a jiggler key? And if I was able to get it out, could a locksmith make me a replacement key? Better question- be willing to do so? Not trying to be a cheapskate by any means. I just live in a very rural area and a towing fee tears us up…. So I’m just trying to avoid that if possible on my old truck. Any information would be helpful. I appreciate it!

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

Cool nice job 👍👍👍

@MYKEYSAUTOMOTIVE

Жыл бұрын

Thank you sir

Hey can please tell me, where do you get your blank key heads from, I saw you used it on a Mitsubishi and you just put in the correct key blank and transponder.

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Those are called multi-function keys .. for now i get my keys at Americankeysupply.com but looking for different suppliers.. i love good deals and fast shipping!!

excellent bro

@MYKEYSAUTOMOTIVE

2 жыл бұрын

Thank you brother!

Thanx my man 👍

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Thank you Adam

@curtisschilling8007

Жыл бұрын

@@MYKEYSAUTOMOTIVE i cannot turn my key off i have a 2013 impala ls

To program key without that scan tool u had in this video it is a different method the one u use three times 10 minutes on 5 seconds off each time?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Yes sir yes sir that is correct!

Your dope brotha

@MYKEYSAUTOMOTIVE

2 жыл бұрын

Thank you! Your dope!

Which auto pro pad are you using original, basic or light?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

I am using the full version!! That comes with eeprom...

This works the same way with GMC, Cadillac ? What is the actual key code to cut a new key at 3:45 (between the series - not quite clear to me)? Another great video.

@MYKEYSAUTOMOTIVE

Жыл бұрын

First letter of code should start with a g

Eres mi ídolo después de piolin cartóon no radio jajajajajjaja cool excelente

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Jejejjejje

I saw you had like 5 home made jiggler keys was that all different I saw you had the cuts for 2 on here if so what area the cuts you do on the rest thanks

@MYKEYSAUTOMOTIVE

3 жыл бұрын

They are a set of 4 keys they all have different cuts i have some for sale if your interested email me thank you lilroxx001@yahoo.com

charge a good $350 hahaha i loved that part! Tired of amatures killing our business! Charge for you expertise, not their budget

How much do you charge for regular transponder keys in your area ?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Its all depends year and the model i live in California so the prices vary

Que tal maestro cerrajero y colega ya que tambien ejerzo este umilde y hermoso oficio, y veo que son muy entendibles y educativos los videos que publica, tanto para principiantes como avanzados. quiero hacer una pregunta ya que no me habia tocado jamas hacerle la llave a una acadia 2008 que tiene la chapa frizada siempre las hago con la lishi y no tengo problemas asta ahora, mi pregunta es como sacar el cilindro de la llave sin llave trae la llave circle plus (+), de antemano agradesco la atencion gracias

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Mandame un email porfavor lilroxx001@yahoo.com

@juanrendon3639

2 жыл бұрын

Que tal, una pregunta si averiguo cómo sacar el cilindro? Me topé con una 2008 yo también hoy y no pude sacar el cilindro?

Hey Have you ever had any issues with the condor key cutter ?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Havnt had any issues yet other than when you try to cut the key a second time.. it cuts the key more deeper.. but no problems..what are the issues your having??

@d3pthp3rception25

4 жыл бұрын

@@MYKEYSAUTOMOTIVE Wanted to purchase one and am not seeing much reviews online

Thank you for the Video. Do you know what i am doing wrong? I try to change the Ignition Lock Cylinder since a couple of weeks with no succes. I tyed the 3 times 10 min. procedure but it did not work. I noticed the difference, that in the desciption the Passlock sign stayes 10min on, in my situtaion it is flashing 10 min. I just bourght another blank Key, cut it but the same Problem. Any Idea what i am doing wrong? Regards Nico

@sgtKELLERMAN

3 жыл бұрын

I just find out, that Canadian vehicles do not have an on-board programming procedure.

Nice and fast

@MYKEYSAUTOMOTIVE

8 ай бұрын

Sure is

How much do you charge for a key on the Chevy truck with the B111 PT key

@MYKEYSAUTOMOTIVE

4 жыл бұрын

65 and up

Hola maestro que bueno que contestas en español, recien vi tu video me gusto y me suscribi, soy cerrajero estoy iniciando en la programación, una pregunta es especial el chip del circulo +? Por favor contestame, gracias.

@jesusvirrey8797

3 жыл бұрын

El chip que utiliza esa llave de circulo + es especial ?

What if the immobilizer lamp never goes off? Have you encountered any issues with the theft system while programming with programmer or OBP? Thanks in advance.

@MYKEYSAUTOMOTIVE

8 ай бұрын

sometimes there are other electrical problems..i would start by checking the fuses!

@MYKEYSAUTOMOTIVE

8 ай бұрын

also when it doesn't want to program with a programmer try doing the 3-10 minute cycles !

Deberías hacer un vídeo enseñando donde están el key code de cada marca de carro

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Si gracias por la idea!! Muy pronto!!

If I lost my keys can I just replace the whole ignition lock? That is if I can pick it in order to remove it?

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

I tried programming one with a km100 but the antitheft light doesn’t go off

@MYKEYSAUTOMOTIVE

8 ай бұрын

something wrong with the vehicle most of the time .. try the 30 min on board procedure

What kind of pick is that?

What blank key did you use to pull ignition?

@MYKEYSAUTOMOTIVE

5 ай бұрын

B106 is the blank I used for this vehicle ..

Love your videos! Just curious what do you usually charge for this service during normal hours?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Helle Cameron if you would like more information please email me to lilroxx001@yahoo.com

@jamescc2010

Жыл бұрын

$350 I heard he said.

Gracias

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Thank you for watching!!

Maestro buenas noches. Si tenías todas las llaves perdidas entonces como abriste el switch?? Con esa llave que le metiste hubieras sacado la copia no?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

No esas llaves que tengo son especiales para abrir el switch ..las tengo por venta si es que vives en los Estados Unidos!

@SuperCarpin

3 жыл бұрын

@@MYKEYSAUTOMOTIVE Aaa ok. Yo solo me dedico al diagnóstico. De cerrajería no se mucho y tampoco inglés. Jejeje..... Saludos hasta los Ángeles. Espero algún día volver....

Where can i get that green pry tool that you are using???

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

Hey bro where did you get your green picking tool ?

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

Una pregunta x que no dejaste la llave con chip en vez de la mecánica ,al hacer el procedimiento?

@MYKEYSAUTOMOTIVE

2 жыл бұрын

Es lo mismo nomas hasta que te diga que pongas la llave que qieres programmar

Do I need to program the key if I still have the original?

@MYKEYSAUTOMOTIVE

3 ай бұрын

Yes

What kind of pic are you using?

How do I find a video where you made the tool thanks??!

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Its on my playlist called jiggler keys

Hello master whit chip did you use

Where can I purchase that tool my friend ?

@MYKEYSAUTOMOTIVE

3 ай бұрын

The pick ??

Hola gracias por el vídeo está genial, me podría desir donde puedo comprar la erramienta para empujar la side bar del cilindro gracias

@MYKEYSAUTOMOTIVE

4 жыл бұрын

se consigue en ebay se llaman lock picks!!

@principioyfin

4 жыл бұрын

MY KEYS AUTOMOTIVE cual es la marca pues me salen muchas gracias feliz tarde

Exelente!! Dónde consigo la herramienta que insertas ? Para remover el cilindro

@MYKEYSAUTOMOTIVE

Жыл бұрын

Uhs-hardware

@luchibear

Жыл бұрын

What is the name to that tool that ur using ?

Whit chip did you use

How do you determine it is a Z key way

@MYKEYSAUTOMOTIVE

3 жыл бұрын

They sell this book called autokey reference by ilco!! You can check out the keys every vehicle needs and you can also check transponder type..

How much would you charge me to send me sell me some keys like that or do you have a video

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

what are the cuts on the jiggler keys?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Cut two one with 5353535353 etc and one with 5252525252 etc

@affordableautolocksmithkey8298

3 жыл бұрын

What are the cuts for. B102 thanks for the videos I just ran into your not many people out there share we run a lot of codes$$$ they cost us for ford 25 and 25 for Gm and it adds up when you do 5 each a week just on ford and Gm ! Looking for ways to put that back in my pocket. I charge $175 for a all keys lost cut and program... nit sure if that is two low we do stay very Busy thanks for any Info !!!

@abdulazizsamad2396

3 жыл бұрын

@@affordableautolocksmithkey8298 what company u use for GM codes ?

I’ve seen that you have multiple jiggler keys. Would you show them how to make them?

@MYKEYSAUTOMOTIVE

Жыл бұрын

Yes sir!! I will definitley show you!!

@pouncerminned863

Жыл бұрын

there is a video already that he made, I just made some using the video

@MYKEYSAUTOMOTIVE

Жыл бұрын

@@pouncerminned863 thank you Pouncer!

I need Spencer to be a lock 🔐 Smith

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Depends

Where can I get the tool pick ?

@MYKEYSAUTOMOTIVE

Жыл бұрын

Uhs

What’s up brother where can I get these tools can you make me a key ?

How can I get in contact with u I am having issues

porque removiste el cilindro ?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

Para consiguer el "codigo" para hacer el corte a la llave ..... se me hace mas facil quitar el cilindro..

@danielf1016

4 жыл бұрын

Yo no soy locksmith pero estoy tramitando mi licencia, soy nuevo en esto, entonces es más fácil remover el cilindro que sacar el código con lishi?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

true d para mi si..proque tarda mas con el lishi .. y luego y lishi te falto como uno o dos mas cortes... baja la applicacion instacode ... esa te ayuda a calcular el corte porque la puerte te da como 8-9 y el cilindro de incendio te da el codigo completo ..

Will it start

@MYKEYSAUTOMOTIVE

Жыл бұрын

No

Where do I get that device?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Try locksmithkeyless.com and americankeysupply

Donde puedo comprar el kit de llaves para abrir el switch

Le cambiaste el cilindro y llaves nuevas amig

@MYKEYSAUTOMOTIVE

2 жыл бұрын

Hola saludos amigo! 👋🏽 para comentar con prioridad, ¡únete a nuestro club solo para miembros! ¡¡Gracias!!🙏🏼❤️

Hello been watching you a while regarding CLONED remotes to properly PROGRAMMED remotes . On average do we charge the same to make a cloned remote to a programmed remote ?? Regards Gary.

@MYKEYSAUTOMOTIVE

3 жыл бұрын

No different prices more cheaper for universal remotes

@garybrown7859

3 жыл бұрын

Thank you just did not know if charge cheaper just doing clone remotes compared to doing full programmed remotes

@MYKEYSAUTOMOTIVE

3 жыл бұрын

@@garybrown7859 yess you can charge the sam as after market ..but no the same as oem..:(

@garybrown7859

3 жыл бұрын

@@MYKEYSAUTOMOTIVE thank you yet again for all your help

@MYKEYSAUTOMOTIVE

3 жыл бұрын

@@garybrown7859 no problem

Okay

Bueno días tengo una pregunta donde puedo conseguir esas llaves para quitar Switch y las herramientas

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Mandame un email!! Lilroxx001@yahoo.com

@erickguardado9499

3 жыл бұрын

@@MYKEYSAUTOMOTIVEque tal..

Hey my keys automotive..como estas donde puedo conseguir esas llaves

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Mandame un mensaje para más información...

@erickguardado9499

3 жыл бұрын

@@MYKEYSAUTOMOTIVE las de chevy esas que mueven el silindro para sacarlo..

Se puede clonar este Chip?

@ricardogallardo5052

2 жыл бұрын

O no usa chip?

@ricardogallardo5052

2 жыл бұрын

?

@MYKEYSAUTOMOTIVE

2 жыл бұрын

Si

GM 39 key?

@MYKEYSAUTOMOTIVE

3 жыл бұрын

GM39 for GM B102/P1113

Dammit man $350.00 dollars hell I only charge 150.00 to make a key for those trucks

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Thank you for watching glad you like it!!

Hola, TE mande email. Gracias

“Charge a good 350” not

@MYKEYSAUTOMOTIVE

Ай бұрын

All day

This must be how we got here from mexico

@MYKEYSAUTOMOTIVE

Жыл бұрын

Im european

Ok, do these steps. Ok you’ll be fine ok u ok? I’m okayyyy

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

Ok

@MYKEYSAUTOMOTIVE

Жыл бұрын

Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️

how can you make using on x-horse 005 with 52 52 52 52 52 , need help. I made a 4242424242.

Nice video thanks for sharing

@MYKEYSAUTOMOTIVE

3 жыл бұрын

Glad you liked it

Good videos, just one question. When do you need to clone a chip and when not to clone in adding/programming keys?

@MYKEYSAUTOMOTIVE

4 жыл бұрын

If you have the original programmed key and the car is not around you can clone it.. or if the programmer doesnt want to connect to the vehicle and its says connection failed.. you can clone his original key... if all the keys are lost you cannot clone the keys because you do not have nothing available to clone.. like i said must have the original programmed key present.

@raymondhewitt75

3 жыл бұрын

Thanks man im in auto locksmith school as we speak..i plan on getting started soon ..im scared shitless lol