All 57 Rubik's Cube OLL Algorithms + Fingertricks
Фильм және анимация
Thanks for watching! Learning OLL is an important step in becoming an advanced speedcuber, but it can be difficult, so if you are still struggling, I’ve got a ton of information down below that might be able to help you. If you still have questions, leave a comment down below and I’ll try to answer it!
Also, hopefully the music wasn't distracting, I tried to keep it somewhat quiet.
Tips/Information for beginners:
1. Don’t know what OLL is? Check out these videos:
- • Rubik's Cube: 2 Look OLL
- • How To Solve A 3X3 Rub...
- • CFOP: OLL for Beginner...
2. Don’t know rubik’s cube notation? Check out this website: bit.ly/2i1CTTe
3. Brackets are used in algorithms to signal that a section can be fingertricked regripless, but they don’t change the actual algorithm. If they confuse you, just pretend they don’t exist and you’ll be fine.
4. OLL isn’t easy to learn. It may take a few months, but after you do it you’ll be glad. Also, there are plenty of people out there who are willing to help you if you’re having a hard time learning these, including me, so drop a comment down below and I’ll try to answer it. I do get quite a lot of comments however, so it may work better to comment on my newest video and just ask a question about this video. I usually notice those comments faster.
5. You’re not going to be able to do them fast at first. When I started out, my OLL fingertricks were terrible, but over time they’ve gotten much better. Just practice a lot and be patient. Here’s an example of an old OLL execution of mine: bit.ly/2gNBzCo and as you can see, they weren’t always very good at all.
6. There are certain fingertricks that are more advanced and will take a while to get good at, such as the D’ push on OLL 23. They might take a while to get good at, so also be patient with that.
My PLL Algorithms: • My PLL Algorithms!
Cube: thecubicle.us/valk-p-7148.html
Music:
Killabyte - Our Story [NCS Release]
• Killabyte - Our Story ...
Killabyte
• / killabytemusic
• / killabytemusic
• / killabytemusic
Jim Yosef - Canary [NCS Release]
• Jim Yosef - Canary | T...
Jim Yosef
• / jim-yosef
• / jimyosefmusic
• / jimyosef
• / jimyosef
Like my Facebook Page! (Can we get 1000 likes?): / 585087161626999
Пікірлер: 1 000
0:34 - *All Edges Oriented Correctly* 1:47 - *No Edges Oriented Correctly* 3:41 - *P-Shapes* 4:20 - *W-Shapes* 4:45 - *L-Shapes* 5:34 - *C-Shapes* 5:53 - *T-Shapes* 6:12 - *I-Shapes* 6:49 - *Square-Shapes* 7:12 - *Bad Lightning Bolt Shapes* 7:30 - *Small Lightning Bolt Shapes* 8:11 - *Fish Shapes* 8:50 - *Knight Shapes* 9:27 - *Awkward Shapes* 10:02 - *All Corners Oriented*
@berkaysefer
6 жыл бұрын
Nightorian THANK YOU
@enfakidgatas7964
5 жыл бұрын
thanks! finaly a helpful comment! it helped me alot
@crow.2225
5 жыл бұрын
Nightorian a
@aquilad.perera9683
5 жыл бұрын
Tks a ton
@jefftom784
5 жыл бұрын
Nighto
I've known full OLL for years, but watched this whole video anyway
@joshbussineau1491
7 жыл бұрын
Keaton Ellis lol
@sterben4958
7 жыл бұрын
Keaton Ellis haha
@matthewssantacruz9998
6 жыл бұрын
L-OLL Get it?
@legitcatcher2184
6 жыл бұрын
Why
@azerefendizade6017
6 жыл бұрын
Matthews Santacruz yeah, there are 6 algorithms in L shape oll
I don't know how you did it but you squeezed 57 algs into a 10 minute videos and aside from the algs being great but the editing was also great! Good job dude that was awesome!
@UberCuber
7 жыл бұрын
Thanks so much, I'm glad you liked it!
@leoshork
7 жыл бұрын
Drake Johnsen I agree
@ernestrubiks7585
7 жыл бұрын
Leonardo Gualandris i agree to :p
@aireplayng---
6 жыл бұрын
Leonardo Gualandris i agree to :p
@cianmoran824
6 жыл бұрын
Leonardo Gualandris i agree to :p
I cannot EXPRESS how much I love this video! I'm currently using it to learn OLL. I'm learning new things by the MINUTE! I applaud this video, and want to tell you to keep up the high-quality content!
Now i have a whole summer memorizing these algorithms
For those who are struggling to memorize them all.....It's NOT easy to learn this algs, it's 57! so it will take you Months or years to memorize them, i recommend memorizing 1-3 OLL per day, and to memorize it easily, you don't need to memorize the alg, you just have to memorize How it's done, or u can memorize the alg and remember how it is done. Not all things can be achieve easily. I'm not going to lie guys, it took me 2 months of memorizing OLL, 3 weeks memorizing PLL, 2 months of drilling Advance F2L cases. So u have to be patient. (sry my english is bad)
@mandystop1077
6 жыл бұрын
u just waste 3sec rding my name Thanks for tip
@szabomarton2003
5 жыл бұрын
@emperor's paradox cheater
@theicewarrior24
5 жыл бұрын
u just waste 3sec rding my name I just wasted 3 sec typing your name in order to respond to your comment lol
@cj4y343
5 жыл бұрын
@emperor's paradox HACKER
@rommelreyes463
5 жыл бұрын
It took me half a year to mmorize all of oll😉😉
These are the best OLL algs I've seen. I learned most of these when I was a beginner. Thanks, man!
If you have any questions, please be sure to check the description first before commenting! I've included a ton of information and tips about OLL that may answer your question, so check that out!
@jashshah8169
7 жыл бұрын
UberCuber can u pls make such video also for plls.... u are doing a great job👌👌
@UberCuber
7 жыл бұрын
This is older, but I still use most of these. I might remake it eventually. kzread.info/dash/bejne/ipiezdRmnM2Zqso.html
@andythan
7 жыл бұрын
OLl 47 I use (F R' F' R) U2 (R U') U (R U2) I think it is better IMO
@user-tc9so7do9y
7 жыл бұрын
UberCuber For OLL 21 I think that F (R U R' U')x3 F' is pretty better
@masacrador1
7 жыл бұрын
M2004 It's slower to execute, at least for me
Find Your OLLs here :) 0:34 - All Edges Oriented Correctly 1:47 - No Edges Oriented Correctly 3:41 - P-Shapes 4:20 - W-Shapes 4:45 - L-Shapes 5:34 - C-Shapes 5:53 - T-Shapes 6:12 - I-Shapes 6:49 - Square-Shapes 7:12 - Bad Lightning Bolt Shapes 7:30 - Small Lightning Bolt Shapes 8:11 - Fish Shapes 8:50 - Knight Shapes 9:27 - Awkward Shapes 10:02 - All Corners Oriented Like so others can see this. Your welcome.
@garryunang6644
2 жыл бұрын
Ok
This has helped me in learning almost all of my olls, thanks a lot! P.S your vids are amazing!
Super nice quality, editing, and instructions (with the notations and slow/fast moves)! going to be using this to start learning full oll, thank you so much!
Honestly, the best video for oll help. It has the best algs.
To anyone trying to learn full oll: learn these algs cause there the best! also, pay attention to what's going on with the f2l in each alg. (i learned the last two-thirds of full Oll in 3 days by using this trick!)
@bguy510
6 жыл бұрын
3 days? That is INSANE
@aquilad.perera9683
5 жыл бұрын
3 days!!! Good for u man!
@Defjulianimations
2 жыл бұрын
god this trick is useful
I was like "what the heck?" When this guy used full speed to solve the cube
Thank you bro! 2019 I think, since I watched your video. And until now, it help me a lot for my speedcubing . Thank you so much!
You're the best! Literally yesterday I was looking for a video just like this and nothing was working, this popped up in my recommended, thank you so much. Btw I love the quality and content keep up the good work!
@UberCuber
7 жыл бұрын
Thanks! Glad I could help :)
By far the best made video on OLL, and even though I learned full OLL months ago, I don't use some of these algs and they look pretty good, so thanks for making this :)
@keystonecuber9632
7 жыл бұрын
Also, do you actually use all of these algs or did you change some from the ones that you use to make them more beginner friendly?
@UberCuber
7 жыл бұрын
Thanks so much! Glad you liked it. Since I know a fair amount of OLLCP and all of COLL, for a bunch of the OLLs I just chose what I thought was the fastest of the OLLCPs because that would make it easier for beginners.
@keystonecuber9632
7 жыл бұрын
+UberCuber okay that makes sense. Thanks
@ohyeah5806
7 жыл бұрын
From all the OLL videos I've seen, This is by far the best and easiest! Thank youyu so much! I've been looking for a youtuber as good as you. Can you make another one on F2L? Thanks
thanks buddy 😊 that was a good video with a standard representation, i would like to help u by learning all the OLLs 😊
I learned full oll a month back and this video forced me to change a lot of my inefficient algs , Thanks A lot !!
@UberCuber
7 жыл бұрын
Glad it helped!
It’s so helpful !!! I’ve been trying to learn all the OLL for now years and that really helped me Thank you very much !!
Thanks for that. I didn't like some of my oll's so it was good to learn more fiingertrick friendly ones.
I'm picking up a cube for the first time in 30 years. A quick cross and F2L have come together with work to be sure I understand the guts as I go, and from the slow demos you run through, it seems I'm starting to be able track the patterns for the last layer. I'll be keeping your video in an open tab. If I have any criticism - whose video is perfect? - it might be the exaggerated release at the end of some of the full-ish speed runs that presumably have the hand/wrist subtly differently posed during the last trigger than if you were going to be ready for the last step. Clearly the next grip you take will depend on what PLL you need. Maybe you would let go for the last look, but I'm not seeing that in full solves. Dunno, and I'm very grateful to you for sharing your work.
@anon-noncuber285
6 жыл бұрын
two generations of cubers, one that brought cubing to the 2000s that started in the 80s and the generation that started in the 2000s
@keshavhajarnavis9457
5 жыл бұрын
ikr
I have been watching this video almost everyday for the past 2 months and today, i have successfuly learned all 57 OLLs. Thanks a lot man.
This is probably the BEST video for full OLL iv watched this vid like 20 times and it's awesome it really helps me whenever I'm solving my cube and forget an OLL I come straight to this video
6:35 that algorithm is so fun to do! :D Thank you for this video, I have been thinking about learning full oll for a while but I was afraid that I would learn a bunch of bad algorithms. It feels safe to learn from you!
@UberCuber
7 жыл бұрын
Glad it helped you!
@mithun122
7 жыл бұрын
21 bro why not just F [R U R' U' x3] F'????
@twitsypuzzletv
7 жыл бұрын
Md. Salahuddin that's COLL,it's a different subset, I use that alg tho
@mithun122
7 жыл бұрын
still this is full oll not coll
@rikkiegieler5638
7 жыл бұрын
Md. Salahuddin because that's slow
LOL you up.oaded this right when I was learning oll lol what a coincidence
@leoshork
7 жыл бұрын
PT Cuber OLL LOL
@twitsypuzzletv
7 жыл бұрын
Leonardo Gualandris lol
@leoshork
7 жыл бұрын
DQ Cubers oll
@mateosnz
4 жыл бұрын
You finish?
This video really help me improve my OLL and it also made my time record much better and lesser which means this skills will help you on your rubick's skill
This video is amazing Sean! I subbed. Keep up the good work!😀
I made a 3x3 Cube Algorithm Part 3 :)
1:34 i came up with my own alg that i find faster. hold it so the two pairs of corners are facing outwards to the sides and do R U R' U R U' R' U R U2 R'
@joe-cm4lz
4 жыл бұрын
lincinho or hold it so that the pieces face opposite while one side is facing towards you and do F(RUR’U’)3F’
@idkwhattomake8458
4 жыл бұрын
so you created a coll alg?
@Blendershick
4 жыл бұрын
I use it! Really fast alg!
One of the most useful KZread video about cubing... this is insane bro I add it into favourites... compliments from Italy! (and sorry for my English)
wow, i used about 70% of what oll you used but the others you have are so much better. thanks man!
Im 10 and i have learn all 21 PLL and 25 OLL
@rei.of.sunshine
5 жыл бұрын
Quỳnh Anh Nguyễn don’t share personal information on the internet
Did you use any tools to memorize all 57? Or did you just write them down or go through them. I'm interested in becoming a speedcuber, and it takes me about 15s to do OLL. Looking for a solution. Thanks!
@UberCuber
7 жыл бұрын
I think I just memorized them by breaking them down into smaller sections and then putting them together slowly. There are a few good videos out there about memorizing algorithms that you could look at as well.
@nickjimenez9983
6 жыл бұрын
I just recognize some of the moves and I'm able to do it
@haykg
6 жыл бұрын
Normally I just turn the letters into a word. For example, R U R’ U’ is RURiUi
@anon-noncuber285
6 жыл бұрын
learn one by one slowly and some day you would get it, I currently have 15 more algs to learn after 10 months of cubing
@anon-noncuber285
6 жыл бұрын
I use a lot of mirror algs so this saved me from learning about 10-15 algs
lol, just started learning and alrrady got the easy, cross and dot oll done. thanks for this video
Thanks for making this video was planning to learn full oll. Thank you
How did you memorize that?
@pacocuber2507
5 жыл бұрын
Her biryerde seni görüyorum lan ben de ezberlemeye başladım
@carels.6895
5 жыл бұрын
@@pacocuber2507 ?? You alright m8
I want to learn but too lazy to remember
@nica2223
6 жыл бұрын
Lol😂 just found my twin huh! 😂
@randomguy8511
6 жыл бұрын
Lol
@randomguy8511
6 жыл бұрын
Joose Kantola Ok
@rameswarboro5195
6 жыл бұрын
Danica Castro your another twin is here😂
@mandystop1077
6 жыл бұрын
hey brother u got another twin
This video was so helpful and it took me only a week to learn the majority of them. Thank You
i dont have words to thank you
Ive known full oll for like 6 months but i watched the whole video lol
Really high quality OLL video. Would it be okay if I screenshotted each algorithm and posted them on an Imgur album?
This was very very helpful. thank u for the amazing video
Good !!! Thanks I learned full oll by this video
Can I ask what is "l" mean?
@milolentze5682
6 жыл бұрын
HugoMC PLAYZ double layer L, so With l the left layer and the middle layer move down and vice versa for l'
@srinivaschalavadi7596
6 жыл бұрын
You flip the cube horrizontally and initiate several different retorted patterns to fully engage some stufff
@memesterpc263
6 жыл бұрын
It means to flip the two left layers clockwise
@nitro2684
6 жыл бұрын
It is a lower case L, or l. It is a double layer left face turn.
@stevx007
5 жыл бұрын
lower case of "L"
Thanks for helping me but in my opinion you do it quite fast even though you are doing it "slow". Great content though!
@user-qf9ku2ou5b
6 жыл бұрын
THEFLAMESSON_ ط ن
@nitro2684
6 жыл бұрын
True.
Earned a sub you are greeeeeaaaaaaatttt I love this channel.... You taught me all plls and now almost all ollls
Thanks a lot bro.I know full OLL but still got to know some really cool OLLs.
3:57 faster if you do S (R U R' U') (R' F R f')
@bguy510
6 жыл бұрын
Six Sides how on earth do you fingertrick S? (gosh, this comment is old)
@cruziobro123
6 жыл бұрын
Six Sides Woah thanks that alg was like 2 seconds for me XD
@malinik9849
6 жыл бұрын
Six Sides Ji
@pinkration
6 жыл бұрын
nobody uses s slices and they're inefficient
@nabilonso
6 жыл бұрын
RubixNoobix6 unless if you also use roux method, which makes slice moves a breeze to fingertrick.
7:43 easier R U2 R' U2 R' F R F'
@fauzan7960
7 жыл бұрын
Btw this is really well made video
@christianjamil8410
7 жыл бұрын
TY
@Nabikko
5 жыл бұрын
Fauzan slower tho I think. Right?
Best video for learning OLLs 😃
Thanks! This video helped me so much! :)
For Oll 18 I like r U R' U R U2 r2 U' R U' R' U2 r better. its just fat sune, fat back sune. For Oll 32 I like S R U R' U' R' F R f' better, a lot faster than what you were doing with B's imo for Oll 50 r' U r2 U' r2' U' r2 U r' is good For Oll 34 I like R U R' U' x D' R' U R U' D x' (Its like Sexy, then a sledge with B's/half rotated D's) A lot of the above I used what you use but then switched and I like these better. Of course these are my opinions though Most of your Olls are good though
@uberstruck8d788
7 жыл бұрын
Cubophobe Did you get these from a video. if not..how did you created these algorithms.
@dzulhamizan9049
7 жыл бұрын
Cubophobe If you're using an android device, you could download Twisty Timer . There's a lot of alternative algs for both OLL & PLL there
@ethandennis368
7 жыл бұрын
JRA Cubing and Gaming found me online when learning oll. There's plenty of sources
@user-oc6ky2tk5o
7 жыл бұрын
Nope . Its like M just from another angle
Big thanks to you broo!!Im now full pll and oll!Thanks so much UberCuber you're the man!!
Excellent!!!!! Best OLL Video man..... Hats off!!!!!
thankyou for making this video it helped me a lot
Thankyou so much this helped me alot it took my average of 50 to 40 seconds which is a big improvement
thanks man! it helps a lot!
I learned all olls from Jperm a while ago and you are using a bunch of unseen als and fingertricks. This Video was very helpful!
Already subbed Congrats for reaching 10k subs
Awesome video. Thank you.
Thank you very much, I was looking for it
Overall a very good and learning video I'm currently learning from this video
The best video I ever seen!
Thanks this helped a lot!
Best cubing teacher I have ever seen on KZread
OMG Sean! You are simply amazing! Thank you so much. You earned yourself a new subscriber!
@UberCuber
7 жыл бұрын
Thanks! :)
thanks! This helps me a lot
Just finished oll today. Yay!!
this helps me a lot thank you 😁😁😁
This helps me a lot!
Thanks so much this video really helped me
Best oll video ! Although some of the algs are different from what I learnt.
Thanks dude...This helped me so much...Love your videos...😊👍🏻
Thanks, this video really helped me out!!
This video really helped me on oll, thx!
Awesome vid, thanks
Thanks bro I was finding these from so many days
Thank you most helpful tutorial on OLL😀
Amazing Video and the instructions are clear. Just earned yourself a Sub!😛😛😜
This was a very helpful and i learned most my olls from here and some frome feliks but most from here
Just what I needed :)
This helped a lot!
Mega good video, you help me so much
Best video regardung cubes, thanx for the video
I learned full OLL from this video and that helped me get a PB.
Wow! This is amazing thanks man :)
thanks for the help. im starting roux and im using you all corners oriented a bit in each of my custom ish solves thx
Thanks that video will help me by learning OLL
U are the best this Video is so so good definitely subscribing
Best video on OLL :).
best OLL video on youtube, sir, can I ask you if theres any list of those u used? thanks
wow this really helped me man tnx
Amazing video
Thanks, because of this tutorial I learnt all dot, cross and P cases
@UberCuber
7 жыл бұрын
Glad it helped!
Thanks for the finger tricks
Thanks for making this video, I finally learn full OLL/
What a good video I learn the oll easily.
every single time i watched this video i learned 1 to 2 plls thx ubercuber!