My definition of an expert craftsman? One who can achieve the same excellent results with either the most sophisticated or the most basic tools.

@timcanthejigman7932

3 жыл бұрын

Thanks, E.A. Loomis! I like having more than one way to do things.

Very nice. Thanks for helping those of us who didn't get an A in shop class.

@timcanthejigman7932

5 жыл бұрын

Thanks, Pistol Pete! I didn't even take shop class in high school and wish I had.

Thank you for doing this easy to understand video for this 73 year old couch potato great grandmother that just LOVES to see these outdoor cooking stoves, lol! I’m a visual learner so this video was perfect. I have various purchased stoves but I will definitely use your video to make an alcohol stove since you made it so easy to understand. I want to have plenty of cheaply made stoves on hand in case I need to give them away for any reason.

@timcanthejigman7932

5 ай бұрын

Hey cocacolafiesta, I make them to take backpacking but I have used them at home when we've lost power. I'm glad you found it useful!

From all the designs here on KZread I reckon this the best design for my purpose. In an indoor experiment 1 tbsp (15 ml) denatured alcohol burned exactly 3 min 20 sec. The same time it took to boil 1 cup (240 ml) of water at 30 deg C in an ordinary pour over kettle (would have been probably even faster if I had used a soda can). I tried the experiment with my household gas stove and the time for boiling 1 cup of water in the same kettle was also 3 min 20 sec. I am very pleased with the results and I can't thank you enough for the excellent video and tutorial.

@timcanthejigman7932

4 жыл бұрын

Thanks for the feedback, Klaus. This is the one design I've settled on and with the jigs, I can make one in 10-15 minutes so I just make a new one every time I go out in the woods. I'm only out in the woods when it's below freezing though so it takes more fuel for me to boil water for my 700ml tea mug.

This is the Best lil alcohol stove out there! Made your design for couple years now, quite afew actually & given to family members too. Hurricanes, power outages, camping, etc. I use denatured alcohol & 3 bent paperclips as pot standoff. Thanx so much!

@timcanthejigman7932

5 жыл бұрын

Thanks, Lynne! I agree, it's a pretty bullet-proof design. Glad you like it!

@American-Plague

4 жыл бұрын

Just advice (not trying to be a know-it-all): This design shouldn't require a pot stand. You *want* the pot to extinguish the center flame.

You made it very clear what one needs to do with common items. I am going to try this one as my first alcohol stove. Thanks for the info!

@timcanthejigman7932

5 жыл бұрын

Hey, glad to hear it, Fatwood Labs! Thanks for the comment!

That's the one I was looking for! Thanks from Alabama

@timcanthejigman7932

5 жыл бұрын

Glad you found it, Paul!

Great video! I just made one to your dimensions and it works perfectly. I was able to boil a small pot of water in about 4 minutes.

@timcanthejigman7932

6 жыл бұрын

Hey, Cory, glad to hear it! About four minutes has been the average time in my experience also. Thanks for sharing.

Thank you! I learned some new tricks and techniques!

@timcanthejigman7932

5 жыл бұрын

You're welcome, Frank! Glad to hear you found value in it!

A very well done video, detailed, concise, with minimal amount of tools.. thanks for the clear and detailed example ... Cheers.

@timcanthejigman7932

4 жыл бұрын

Thank you, seamus3051. That's what I was going for.

Perfect and incredibly easy. Thank you.

@timcanthejigman7932

5 жыл бұрын

Thank YOU, Jo! I was going for easy.

Bottom: 1" Top: 1 1/4' Inner wall: 1 1/2"

Lol, anyway! Nothing like the comment section to make somone feel more brave! I thought it was neat to see this because the film shows you can use the top of the can to make a spill proof stove! And you made it look good! 😂 Not my design! Love these stoves! Also you might have solved my seam problem, because the stove that I made is prepped within a seperate manner than these topped filled stoves that have a screen instead of drilled hole's! Push pins is not the way 🎉 Wow, you really refined how you build that! The tooth pick was amazing, honestly surprised!

God bless you. Thanks for keeping it simple for us beginners.

@timcanthejigman7932

5 жыл бұрын

Thank you, James!

Very nicely done, thank you for sharing it. Amazing!!!!!

@timcanthejigman7932

6 жыл бұрын

Thanks, A Jr! I see you've been busy making videos too!

This is a great channel. I had never heard of these stoves, even though I do a lot of camping. Thanks and keep up the good work.

@timcanthejigman7932

4 жыл бұрын

Thanks again! I don't remember now how I came across these stoves but once I saw a few videos, I knew I had to have one in my backpacking kit and that's how it all started. I'm really all about the backpacking.

This is an excellent step by step

@timcanthejigman7932

4 жыл бұрын

Thanks, Peter! I appreciate that.

Another top notch video. Good work!

@timcanthejigman7932

6 жыл бұрын

Thank you, Billy Andrew!

Amazing! Now I can make one. Thank you!

@timcanthejigman7932

5 жыл бұрын

Thanks, Nathalie, and glad to hear it!

Bravo!! I just made a similar one without the inner wall that takes a lot of time to prime but this one seems a lot faster and easier! If I made the last one run for 34 minutes this one will probably outdo it for sure. Thanks for the tutorial my friend!

@timcanthejigman7932

3 жыл бұрын

Thanks, HardkohrPiraat!

Nice video. It's very simple to do. Thanks for the video!

@timcanthejigman7932

6 жыл бұрын

Thanks, KSFWG! I thought you liked the woodworking stuff.

@KSFWG

6 жыл бұрын

I do, but from time to time I like watching other stuff too...

Well done, Tim. Say, that book is mighty handy!~ Subscribed!

@timcanthejigman7932

5 жыл бұрын

Thanks, JP! The book isn't bad for reading, either. Thanks for the sub!

Awesome video. 👌 I'll be making one of these in the near future. Helpful tip: a can opener works great for cutting out the top center of a pop can. Makes a nice smooth rim, no filing needed!

@timcanthejigman7932

Жыл бұрын

Thanks, Lucas! As for the tip on using a can opener, I've yet to hear which type of can opener will leave that lip that the internal wall needs. If you have the ability to make a video, that would help all of us.

Man I been making mine all wrong,I was putting the top in the bottom, instead of the top over the bottom,I kept having leaks and whatever else can happen lol,I watched a few of ur videos And I made one last night that worked great,no leaks and it took no time to bloom,I subbed to u as well,I appreciate u sharing this,take care man

@timcanthejigman7932

6 жыл бұрын

Great to hear, Nathanial! You should make a video of making one for your channel. Seems that you like fire!

@NatesOutdoors

6 жыл бұрын

TimCan The Jig Man yeah I love different ways to start fire,always makes for a good camping story,I have thought about it or at least cooking with it in a video,it should be pretty comical lol

@NatesOutdoors

6 жыл бұрын

TimCan The Jig Man I made a video today of making one,and I hope ya don't care I mentioned ur channel as well, thanks buddy

@bruce4461

4 жыл бұрын

I've read that by not sanding off the bottom section paint, as the stove gets hot during use, the paint wil bond the upper and lower sections together to prevent leaks. Not sure if true, but makes sense.

@timcanthejigman7932

4 жыл бұрын

You have it right, Bruce. And you probably read it in one of my replies to someone else.

Useful and creative. A great scout project.

@timcanthejigman7932

5 жыл бұрын

Thanks, L J! I don't think they let scouts use home made alcohol stoves. A pity but probably for the best.

Great Video! I use AntiGravity Gear "Tin Man" stove (which is awesome), but I do like the idea of having the higher and more upward pointing ports like you use here. Gonna give this one a try! Thanks again

@timcanthejigman7932

4 жыл бұрын

Thanks, Michael! It beats having to pay those prices for one.

Great video now i know where i was going wrong , well made vid and stove many thanks.

@timcanthejigman7932

5 жыл бұрын

Glad to hear it worked for you! Thanks!

Built it. My first. Wasn’t too hard. Boils 16 oz 42 degree F water in 7.5 mins. Thanks again!

@timcanthejigman7932

5 жыл бұрын

Glad to hear it, Fatwood Labs! Now you just need to use it out in the field.

marvellous workmanship, cheerio

@timcanthejigman7932

4 жыл бұрын

Thank you, kOx X.!

I am not one for leaving comments. But this one is “most excellent “. Thanks.

@timcanthejigman7932

4 жыл бұрын

In that case, thanks very much Craig!

I do have some tools but not enough. I have seen a lot of guys make some alcohol stoves but i have to say you made you did not use any power tools how cool and thank you for showing us. Cool

@timcanthejigman7932

5 жыл бұрын

Thanks for the comment, Gregory. I do have several videos showing using power tools to make some alcohol stoves but I had requests for this video using only easily available tools.

@gregoryhare6538

5 жыл бұрын

Yea and all the other guy's i had seen that's all hey used and seeing your method so easy and when i get my small work table donei will get ready to start trying to make something to work on

I have made many stoves, but none like this ! Great job

@timcanthejigman7932

4 жыл бұрын

Thanks, Tex! It's great to have more than one way of doing something.

learned some metal working tricks. thanks

@timcanthejigman7932

5 жыл бұрын

Thanks johnny6148! Hope you can put it to use.

That was a really good video! Thanks a lot for the knowledge 👍👍

@timcanthejigman7932

2 жыл бұрын

Hey thanks, Don! I hope it helps you make an alcohol stove.

That book measurement trick is brilliant.

Cheers Mate!

You sir are a great teacher

@timcanthejigman7932

2 жыл бұрын

Thanks for that, Calvin!

That's pretty cool, great if one had to hack one without special tools. But I build models and have all sorts of tools. Will have to look for the build with not common tools.

I really don't like you but I don't like anyone I will note it was good of you to tackle this project for less unfortunate people I like projects like this and I thank you for your time you did not waste any of my time compared to all the other videos I have watched I suppose I could drink enough courage to say I salute

@timcanthejigman7932

4 жыл бұрын

You probably won't like that I'm counting that as a win.

Thank you, that was cool

@timcanthejigman7932

4 жыл бұрын

Thank you, Artin T.!

a simple stove? this is the hardest kind to get just right!

@timcanthejigman7932

Жыл бұрын

So how did I do?

You can flair the top part out on an old glass jar or bottle bottom way faster and smoother then on another can bottom. Also I cut the inner divider wall from the middel section of the can and not from a second can. That way you can reduce the tool list to a single cutter blade, spacer block and gloves. One side of the blade is for all the cutting work and the other is reserved for punching in the flame slides. Happy Christmas!

@timcanthejigman7932

4 жыл бұрын

Yes, you should check out some of my other can stove videos to see me use the middle of a can for the inner wall. This video was showing different techniques. Happy Holidays!

nicely done

@timcanthejigman7932

5 жыл бұрын

Thank you, Kenneth.

nice job portable stove

I make my penny stoves using a single can. All you need is a knife, a small drill, and a marker for the tools.

That process was by the book

@timcanthejigman7932

4 жыл бұрын

Legit.

You might be able to put the blade from the utility knife into the book and score your way through the can. You'd need to apply more pressure to the book to hold the blade in place, though.

@timcanthejigman7932

4 жыл бұрын

Thanks, Kris. Yep, in some of my other soda can stove videos, I use hook blades to score the line. In this video, I was showing how to use scissors to do it

I like the idea of using a P.G. Wodehouse book and a pencil as a marking gage. I’ll have to try that. Also, crimping thin sheet metal by pressing it over a toothpick.

@timcanthejigman7932

3 жыл бұрын

Thanks, Gary! It doesn't have to be PG Wodehouse. It could be Jerome K Jerome or Mark Twain.

@censusgary

3 жыл бұрын

@@timcanthejigman7932 Now that you mention it, in addition to my Wodehouse collection, I have an enormous “Autobiography of Mark Twain” volume that would work for scribing any measurement up to about six inches.

very slick

@timcanthejigman7932

6 жыл бұрын

Thanks, Mickleblade!

@mickleblade

6 жыл бұрын

just thought, why not put your utility knife blade page 165(?) and score all round the can a few times. I'm sure it'd cut it off and there's no need fo the marking stage.

@timcanthejigman7932

6 жыл бұрын

That's definitely another way of doing it. I used to use straight blades (before I discovered hook blades) in between the pages of a book or screwed onto a block of wood before I came up with the adjustable jig. The jig could just as easily hold a straight utility blade but hook blades are about 482 times better. I flipped a coin on whether to use scissors or a straight utility blade for the video.

Sensacional!!!

@timcanthejigman7932

6 жыл бұрын

Thank you, Sergio!

gorgeous

@timcanthejigman7932

3 жыл бұрын

Thanks, Bryan!

Good job sir thanks...

@timcanthejigman7932

5 жыл бұрын

Thank you, M Y.

Little bit of this and that nice

@timcanthejigman7932

2 ай бұрын

Thanks, Kevin!

I just use my hand held can opener on my tops,. Clean cut all way around.

@timcanthejigman7932

2 жыл бұрын

You may want to read some of the other comments.

Absolutely everyone makes basically a copy of the exact same thing. This was a good simple demo, but it’s basically the same, so I have a question. Is this scalable to make a larger, longer burning stove? Like would increasing the height make a larger reservoir, that would last longer, or is there something going on here that requires this size. One thing I find pretty annoying, or shall I say limiting, is they all burn for just a bit longer than the time it takes to boil a couple cups of water. I’d like something longer lasting.

have you tried putting the inner wall with carbon cloth too?

You should find a piece of sheet metal and a mig welder and weld it to the top of the ammo can stove since the top keeps warping. This will make it more than a one time use stove.

@timcanthejigman7932

6 жыл бұрын

I was kidding about it being a one-time use stove. I've burned in it several times and I don't find any evidence of it burning through or rusting. The top still locks down fine even being warped. I was really trying to avoid welding since that would take it out of reach of a lot of people who would otherwise want to make one. My actual biggest concern is now the aluminum legs since I subbed those in for the steel ones.

This is the prettiest one and very well made. But if you were stuck, you can make one with only a utility sliding blade or a swiss army knife. You just make the bottom part 1/4in taller and crimp the top part (16 crimps) and make only one hole about 1/16in diameter about 1/4in below the rim (this hole is needed to suck in air once a pot is set atop the rim). The top part could be 1 and 1/2 in tall also and thus by sitting inside the bottom part it becomes the inner wall. Only one can needed here. The beauty of this is that once you snuff out the flame and the stove has cooled, you just pull the top off and easily recover the unburned fuel. But that is difficult or impossible with all other designs. I found that all the different designs will bring a given quantity of water to boil in about the same time with the same fuel. There is no need for aluminium tape or glues of any kind. The next challenge I find is to create a stove with an adjustable flame. I have not come up with a design for that yet.

@timcanthejigman7932

Жыл бұрын

That sounds like a workable design, Sylvain. I also haven't come up with an adjustable burner design.

@sylvainlandreville3425

Жыл бұрын

@@timcanthejigman7932 Hi have been collecting aluminium bottles and even Flovent containers (I have a friend who has asthma). Basically I want to work with the venturi effect like in an updraft carburator. I would like to be able to adjust the column of air as there is no float nor jetting involved here like in a carburator and I do not want to pressurize anything. I feel a preference to stick to basic tools and easily obtainable materials. The proper design goal I have in mind would use the venturi effect to help or enhance the vaporisation of the alcohol and adjust the flame by raising or lowering the "column" thus altering the venturi effect one way or another... This is not a new concept. Just never applied in alcohol stoves

Amazing

@timcanthejigman7932

Жыл бұрын

Thank you!

fun stuff cheers m8

@timcanthejigman7932

5 жыл бұрын

Thanks, cri8tor!

@cri8tor

5 жыл бұрын

You got a new subscriber. Keep making the tutorials.

@timcanthejigman7932

5 жыл бұрын

Awesome to hear! I'm working on my next vidoeo now.

Once you've scored the top, you can also cut from the hole in the top to the edge with scissors into tabs, and bend the tabs back and forth to snap them off. If the scored line is neat, the edge can start out tidier before smoothing it out.

@timcanthejigman7932

3 жыл бұрын

Thanks Bruce, that sounds like a good way to do it. I'll have to try it.

If you simply take your utility knife and just go around and a around inside the grove, you will be able to pop out and almost perfect non-jagged circle that will need very little sanding. I've do it many times.

@timcanthejigman7932

4 жыл бұрын

Like you see at 7:12?

Good and simplest

@timcanthejigman7932

4 жыл бұрын

Thanks, Ari! Those were my goals.

Good build. Only thing I saw wrong was when you decided to put the inner can in the opposite way, now the little notches to let fuel between the two walls are at the top.

@timcanthejigman7932

3 жыл бұрын

At 17:45 I cut notches in the shaped end of the juice can and around 21:00 I put the pieces together, with the shaped end of the juice can going in the bottom. I'm not sure how you're seeing it differently?

Hi Tim, thanks for all your videos, I love them. What kind of juice can did you use for the inner wall of your alcohol stove?

@timcanthejigman7932

3 жыл бұрын

Thanks, Ronnie! That Sacramento brand is just one I get at a hotel I frequently stay at. It's the same diameter as most juice cans, something like 2 1/16".

おうっ！！手で仰ぐとサイドバーナーに点火するのですね＝3

@timcanthejigman7932

5 жыл бұрын

Lighting it remotely hasn't worked.

Overwork.....and I would like to see the fire.....how is the fire ??? I can see only a little Saludos de BILLIG CAMPER desde Alemania.

@JefeInquisidorGOW

4 жыл бұрын

Es poco visible debido a la luz, pero definitivamente está ardiendo.

Muito bom Parabéns nota 10 Obrigado

@timcanthejigman7932

2 жыл бұрын

Thank you, Albenia!

Great video! Do you remember the diameter of the smaller can? Or how many ounces. I cannot find that Sacramento tomato juice. Thank you so much

@timcanthejigman7932

6 жыл бұрын

Hi, Roger. I didn't make it clear in the video but it's the same as most juice cans, 53 mm or about 2 1/16". It's the same as a V8 can. The short ones like I used are 5.5 ounces. I often stay at a hotel that has that Sacramento brand, there isn't anything special about it. Thanks for asking!

"Very good sir."

Thank you but still way to complicated. I just watched another video and it simplified the process much more. Why remove the paint from the can in the first place?

Interesting! Have never used one of these. Any tips on fuel, fuel consumption or how you use it practically when doing out-door trips?

@timcanthejigman7932

Жыл бұрын

As for fuel, only use denatured alcohol or yellow bottle Heet. Do not use rubbing alcohol. In another of my videos, I list the capacity of the different stoves made from different sizes cans. You'll want to practice with it at home to see how much alcohol it takes to boil a cup or two of water without having a lot left over.

I like to leave the paint on to prove to the rich snobs my little burner was nothing but the by product of a refreshing beverage

@timcanthejigman7932

3 жыл бұрын

How do you get the rich snobs to go camping with you?

@jadekayak01

3 жыл бұрын

@@timcanthejigman7932 they dont. They just go to the same spots. Glamping vs camping

I actually came to make this stove (using a juice can for inner wall) on my own prior to seeing this video. I love how the bottom grabs the bottom of the soda can. But it always bothered me that the top of the inner wall didn't quite fit into the top groove of the soda can. I actually crumpled a coupe of inner walls at the top during assembly. I found that it didn't actually matter, because the pot sealed off the inner bowl anyway, but it just bothered me because it looked terrible when I saw the crease inside the stove. So I searched for a solution. I discovered that if you cut off the top of the juice can immediately below the lip, (about 1/8 inch from the top) the top of the cut exactly fits into the top groove of the soda can. But now the bottom of the juice can won't fit into the bottom of the groove of the soda can. So you just cut 16 (or 18, 20, 23, any number) slits 1/4 inch long in the bottom of the inner wall to make a series of tabs. The tabs then can fold slightly inward to overlap and join the bottom of the groove in the soda can. (This is also exactly how I fit the inner wall when making it from the same soda can.) Either way gives the same result, a nice tight seal at top and bottom, with no seam running up the entire height of the inner wall. All three inner wall types give similar results. About 4 tsp (20 ml) denatured alcohol boils two cups (475 ml) water in a 4" (101.5 mm) tin can in about 6.5-7.5 minutes. If I ty to use only 18 ml alcohol, it becomes very iffy to come to a full rolling boil. About half the time, it runs out at 205-210 ^F. 20 ml ensures a full rolling boil every time. This holds true both inside my sheltered garage and in the field with ground shield and windscreen. I have been very frustrated with this new hobby, as I have seen others in KZread videos claim rolling boil of 2 cups using as little as 13 ml of denatured alcohol. I have never once attained rolling boil with less than 18 ml alcohol, with any of the about 200 stoves I have made in the past 6 months. I've made SGT Rock Ion stoves, flat cat stoves, Roy Williams cat stoves, Pika stoves, Pepsi can stoves (like yours), capillary hoop stoves (which I love!) and many others. Most claim to recover around a half ounce of alcohol after boiling, but I've never consistently come to boil with less than 20 ml. Living in Florida, I'm usually starting with water anywhere from 75^F to 85-88^F. How in the world can these guys all get boils from 60^F water with 17 ml alcohol? It's very frustrating for me!

@timcanthejigman7932

3 жыл бұрын

Thanks for the comments, xenaguy01! I never really paid attention to boil times or amount of alcohol used since those are both so subjective. What works inside my workshop doesn't translate to real field use in the winter after the stove, the alcohol, the pot and the water have all been kept in the cold overnight and I'm trying to boil water for breakfast. I just go for the most reliable stove and that's the common one-can12 oz. pop can stove. It's pretty bulletproof and with the jigs and templates, I can make them all day.

@xenaguy01

3 жыл бұрын

@@timcanthejigman7932 I don't actually sweat over boil times either, except as a measure of how much fuel I actually need per meal. That's important not because of the cost of fuel, but because I have to pack the fuel in, and pack any leftover fuel out. I figure that if I can boil 2 cups with 20 ml at home, I can probably boil 2 cups with 25 ml on the trail (barring exceptional circumstances). It's just very frustrating to me that, even in my garage, I can't get consistent boils of 2 cups with less than 18-20 ml of alcohol. That pretty much means I have to pack 25-30 ml per meal or risk running out of fuel on the last day. Aargh! 😖 This has worked out well, but I'd rather pack 20 ml alcohol per meal than 30, ya know?

Great video. Is there a version of this stove that has holes on top for narrower mugs/pots?

@timcanthejigman7932

3 жыл бұрын

Hey WolfeAdventures, I have videos on making an alcohol stove from a mini can and also from a juice can. Those have a smaller flame pattern and the ones I use when I'm boiling water in my narrow Stanley cook pot.

@wolfeadventures

3 жыл бұрын

@@timcanthejigman7932 thank you. I’ll check that out.

Like the paper trick for the holes. But a sharp blade must be a common enough tool instead of scissors. You’d save 10 or more minutes of your time.

@timcanthejigman7932

5 жыл бұрын

Could be but I hadn't used scissors for making those cuts in any of my other videos so wanted to show that technique.

I made a crude one with just a pocketknife

@timcanthejigman7932

4 жыл бұрын

Hey Mailman AG, that's awesome! I'll have to give some thought to making one in the woods, outside of my workshop.

did that exactly as you showed... burns Yellow with 91% Isopropyl (9% purified water), and the jets never start at all... bad fuel or do they have to 'burn in' for a while before they work?

@timcanthejigman7932

4 жыл бұрын

Hey TheStraycat74, I just never use anything with "iso" in the name. Only use denatured alcohol which you can get in the paint department of a hardware or discount store or use Heet gas line anti-freeze in the automotive section. Those burn with a clean blue flame and no gumming or sooting up.

Could you tell me what are the measures to make the three cuts of the cans? Thank you very much for the video.

@timcanthejigman7932

5 жыл бұрын

Bottom is 1", top is 1 1/4", inner wall is 1 1/2".

superb

@timcanthejigman7932

3 жыл бұрын

Thanks kasiraki!

@kasiraki

3 жыл бұрын

@@timcanthejigman7932 I am the one that Thank you was simple all data needed, to the point now find the cans (soda easy the juice here mmmmm odd continent) and have a very good one

Now I'm going to have to find my P.G. Wodehouse.

@timcanthejigman7932

Жыл бұрын

You only have one???

So i Made since 5 Years my Mini Alc.Stoves.Good with 20 mliter Alc.Spiritus😯👍👲🍬🙀🇩🇪🍓🐝

@timcanthejigman7932

Жыл бұрын

That's awesome to hear!

I've seen stoves with carbon felt inside, would this work in this stove? Would it improve this design if I put a strip of carbon felt inside? Thank you sir☺

@timcanthejigman7932

5 жыл бұрын

Hey Santiago, I think I'll give that a try, putting it in between the outer and inner walls. I'll see if the wicking action gives some benefit. Thanks!

@uncleho313

4 жыл бұрын

@@timcanthejigman7932 any positive results ?

@timcanthejigman7932

4 жыл бұрын

@@uncleho313 I've made a couple of videos about it if you check my channel. Here's a link to one of them where I do a test: kzread.info/dash/bejne/oGaeuq17ZNO-hMY.html

@romainejayne1811

Жыл бұрын

Carbon Felt is made from graphite. Wool Felt works too, but it has a slight odor some say. For heating carbon felt does work to conduct the heat but I'm leaving mine out so I can put food on the stove and not worry about chemical anything. Just my preference. You can get some stainless-steel soft mesh and wind some up inside the burner. I've heard that works or use copper mesh it gets really hot.

Love your stoves but better are your videos. I’m looking for a bottle like you have to carry the fuel. What material is it that the fuel doesn’t eventually melt?

@timcanthejigman7932

3 жыл бұрын

Thanks, Brad! I found those plastic bottles at Walmart in the travel toiletries section. I haven't had any problem with them on dozens of overnighters.

@bradmugleston3285

3 жыл бұрын

@@timcanthejigman7932 found a 3 pack at the dollar store - for one dollar!!!

Can you place some carbon felt or insulation inside some how to prevent spills ? If so , can you just add some inside on the bottom or does it have to be inside the outer wall?

@timcanthejigman7932

Ай бұрын

Hey Jedi, I would put carbon felt around the inside perimeter of the stove before I assembled the pieces together. To be clear, I don't use it myself anymore. I don't think there is enough benefit to be had that outweighs the additional difficulty of using it. I did see your comment on the other video. I haven't experimented with carbon felt for a few years now. You have good questions. It sounds like you may want to pick up where I left off. Thanks!

@JediStockTrader

Ай бұрын

@@timcanthejigman7932 Ok, what do you suggest is a better stove. What are you using now and a link please!

@timcanthejigman7932

Ай бұрын

It depends on which size can you want to use. I have videos on my channel where I make stoves from juice cans, mini cans, 12 oz cans and Fosters beer cans. They're all the same style, which is the only one I now make for my own use.

Yes I have a question, how come my stove does not prime?

@timcanthejigman7932

4 жыл бұрын

A few things come to mind: overfilled, misplaced holes, inner wall out of alignment or poor quality fuel.

how do the top and bottom halves not separate when you pick up the stove?

@timcanthejigman7932

5 жыл бұрын

Hi Jo and great question! Initially, it's just the friction between the two pieces because it's a pretty tight fit. After the first burn, the paint on the bottom piece melts from the heat and glues the stove together. It's nearly impossible to separate after you've used it. Thanks for asking!

@haizi7179

4 жыл бұрын

@@timcanthejigman7932 I appreciate how responsive and intricate you are, we could use more like you.

@timcanthejigman7932

4 жыл бұрын

Thanks, Haizi!

How long it will last when you using it and how many percent of alcohol will u preferred thanx

@timcanthejigman7932

5 жыл бұрын

It should be good for around 20 minutes. I only use denatured alcohol. I never use isopropyl alcohol because it has impurities that make it burn dirty and it will soot up your stove and pots.

If you used the top of the can and insert that inside the bottom piece and that could be a default internal heater wall. but more effectively is the reduced diameter tin or use an earlier off cut with two interlocking cuts to make the inner wall But WHY cut the top out of the can?

@timcanthejigman7932

4 жыл бұрын

This is the kind of alcohol stove that primes from an open bowl.

Can you use it inside the house for cooking? Is that rubbing alcohol?

@timcanthejigman7932

4 жыл бұрын

Hey Jude, you absolutely can use it inside for cooking but I would only use denatured alcohol. It burns cleanly with water vapor as a by-product. I wouldn't use rubbing alcohol as it won't burn cleanly. It creates a nasty, sticky residue on your stove and your pot.

Sure wish you had some close-ups

Why is this better than just using a tuna can stainless steel scrubber and shoelace

@timcanthejigman7932

5 жыл бұрын

I don't know, I've never made one of those. Mrs. TimCan doesn't like seafood so we don't have any canned tuna.

by hand how about that,must say clever..chim that much to maintain the beavel.

@timcanthejigman7932

11 ай бұрын

Thanks!

Just found this video. I found that storing my aluminum stove in a empty BAG BALM 8 oz square can.

@timcanthejigman7932

5 жыл бұрын

Thanks Old Man! I looked at those tins and they look like they would be ideal. I've also used a short length of shipping tube.

Hello can you give an estimate ratio burn time per ml of denatured alcohol. Thanks

@timcanthejigman7932

2 жыл бұрын

Hi Rj. For a very rough estimate, I get 30 ml of alcohol to burn for 20 minutes so 40 seconds per ml.

Great video sir, But to save time tape stanley blade to short ruler and you have yourself a marker and cutter in one. Place ruler with blade in book to hight hold firm, then spin can against blade. Cut to hight.

@timcanthejigman7932

5 жыл бұрын

That sounds like a good way of doing it. Thanks!

@RSP190166

5 жыл бұрын

@@timcanthejigman7932 Pleased to help.

Im still trying to figure out how you were folding the paper

@timcanthejigman7932

5 жыл бұрын

I got the technique from LittleBitWorks. His video shows a good closeup of it: m.kzread.info/dash/bejne/Zq2W25OfaZCvnsY.html

@WaschyNumber1

4 жыл бұрын

You don't need it be exact it's not rocket science, put a hole on the tin on every opposite side and between also in opposite sides and done 👍 between 14 holes and something it's OK.

🙂👍🏻

@timcanthejigman7932

5 ай бұрын

Thanks!

Do you sell these?

Do you sell them??? And if so various sizes for various size pots???

@timcanthejigman7932

3 жыл бұрын

Hi 99959bill. While I don't sell them, there are some sellers on eBay.

@99959bill

3 жыл бұрын

@@timcanthejigman7932 - Thanks ô¿ô