Akai MPC Key 61 - Split and Layer Sounds - Using Key Ranges
The Akai MPC Key 61 makes splitting and layering sounds really easy within your sequence and allows you to mute and unmute the layers quickly while playing! The key ranges page makes use of the touch screen to allow quick split point changes, sound selection, and layer changes. While the MPC Key 61 has a ways to go when it comes to live performance features, the key ranges page helps bridge the gap between the studio and the stage!
In this video I walk through how to use the key ranges page on the Akai MPC Key 61 to setup instrument tracks for layering and splitting sounds across the keybed!
Don't forget to SUBSCRIBE if you're new and hit the LIKE button if you enjoyed the video!!
Looking to purchase the Akai MPC Key 61 or other music gear? It helps support my channel for no extra cost to you if you buy through the link below!
www.zzounds.com...
Thanks for watching and comment below with any questions you have and I will answer them as soon as I can!
Пікірлер: 62
Your mastery of the instruments and great ability to impart your knowledge is greatly appreciated. You are also inspirational and motivational to guide us toward greater success.
Another great little guide! Thanks so much! I've used my Key61 twice now in gigs and definitely wish I'd had the idea of loading up four/five tracks this way for sound-switching and layering in the moment! I can cope with the load-up time (which isn't too bad really) but this would have made things even easier. By the way, for anyone reading this who is wondering about use on stage, the Key 61 is such a great live instrument - as well as being truly an inspiring base from which to experiment, create, record etc etc. Very much a player's instrument too - very expressive...
I just bought the AKAI Key 61 yesterday. I plan to use on Stage. The Keygroup way is definitely the way to go, being the secondary keyboardist, I need to jump around on different sounds including samples. The Keygroup System is a Keeper. Thanks 😊
The fact that you are a proper musician and also you play live makes your series of videos the most useful on KZread for me . Ive been going crazy with all these “beat making” & “MPC Producers “ videos that basically teach you nothing whilst having to listen there terrible “Music sequences “ that aren’t even their own because they’ve stolen samples from real musicians. That said - one question. After you’ve done all the layering and splits for a certain song , how and where do you save it and then move onto another set up for a different song . Many thanks .
@DSoundman
4 ай бұрын
Thanks! If you're using key ranges for your splits and layers, you can only have one per project, so you'd need to save the project and setup a different one on a different project. Obviously this isn't ideal for live performing unless you have time to load projects in between songs. If you did the splits/layers as one sound preset inside Fabric XL, you could save it as a user preset and then have up to 8 different user presets assigned to plugin programs and tracks allowing you to mute/unmute those tracks. Better for live performance, but not great if you want sounds outside the samples in Fabric XL or more than two layers/splits. Hopefully that helps a little!
Finally I found it! Been looking for this info since I bought it 2 months ago. Thanks!
Bro you’re my new mentor! Thankyou so much for teaching us!
Yes your videos generally from the MPC are very teaching. I learn more from your videos than the Manual from Akai wich is in my eyes terrible written and illustrated. Your videos just bring it on the point to know things how to do. More of MPC videos pls, that were cool. I have a Key 61 and basically I wanted it only as second sound source beside my Akai Force cause of the 8 Plugin limitation, then I had 16. What I struggle actually with it is, that the Key 61 obviously not can receive more than one Midi Channel same time and send it to different tracks then. If I send MIDI from 2 different tracks from Akai Force Channel 1 and Channel 2 to my Key 61 on the Main page only the Track is playing wich is there set. Like you would send Midi from a DAW on several different Midi channels to play several tracks on the MPC but from external. If I activate more than 1 then logical all activated play. I dont found yet Midi Settings to set a track on a different Input channel. The setting on the track is the OUTPUT Channel. if I take 5 different Midi Tracks on MPC and send 5 different midi channels of 5 different external synths all work fine. MPC send that all seperate like it should be. But in receive the MPC has its global channel and on that seems it to receive the data. Unlike in comparison to the Force wich has this Midi Input section on the track page wich you can set from where or wich input port and on wich channel data comes to the specific track and go to wich output port on wich channel it does send it all at same time. Like a programmable Midi router. Force can that. MPC obviously not cause that Input stage is not available yet as I see, or at least not found yet. The Manual just say nothing about that, not even closer Midisettings are mentioned ( thats why i say Manual is terrible ) I am thinking now to change it and take the MPC as Main cause its so powerful and just take the Force as a Sound module with 8 more Plugin tracks played by the MPC on 8 different Midichannels. I dont have yet try out if that work from Force perspective, but basically from Midi it should, cause the Force has that midi routing Input stage wich the MPC not has... or not found. if someone knows how to do that ( to set the Midi Input stage ) on the MPC then let me know pls.
Good tutorial. Thank you!
Thank you I really appreciate you, I am a pastor and worship leader This is a big help to me, again thank you.
How do you save the layers and splits?
Awesome Keyboard. Considering buying this just for live Play. 😎
Thank you 😊
What about the 4 pad banks? Can u have one pad bank with drum samples, one with track mutes and one with loop samples and switch between them? That would be really flexible
Thank you for this video. And great video editing too.
I’ve been waiting for someone to make this video. Thanks!
Are these splits and layer sounds settings also availeble in the menu of the Akai Mpc live 2?
Hey Douglas, die you found a way to safe the armed state with the programm? When I change programm or sequence, the state is another.
Great tutorial! One thing I can't figure out, how can I assign an Arp to a single track. For example, I want to use the Arp in a live setting for a plucky pattern but layer strings underneath without have the Arp on the strings?
@forton615
9 ай бұрын
Same here, got my mpc key yesterday, just found out arp is a global thing. If that's not possible it's a missed opportunity.
Is there a way to use pad perform with the keysplit live? Edit: I figured it out I created track 1 as just a midi track and sent midi to 2, on 2 I sent to 3, 3 I sent 4, and so on and so forth. This way you can use pad performance and it will trigger all the tracks with the appropriate key split. Do you know of a way to somehow get an arp after the midi composition? Similar to loading the arp inas an effect, like you would on Ableton etc. I’ve tied routing midi out of the built in arp in the latest plugin (forget what it’s called) but it didn’t work.
Wow….. feeling to buy this as my new gig+studio board
Awesome stuff again! Quick question did you tweaked those sounds a little bit or is this just out of the box? The Studio EP sounds really nice!
Awesome!!! Thanks a million! 👍👍
Wow 😳 this y 61 is something big it has a good quality of sound the piano is crispy even the EP I really like and I can see it's also very good for live performance I love it I gonna get my one for church it's very good .thank my brother for this helpful video please can u make another video I want to know if it has its own styles like if u want play on a one man band u will have to put a style to accompany you so please let us know and make another video
I layer. 3 instr then use diff velocities for 2 and a short delay to play the 3rd one - can also blend- often have 3or4 other splits with layers - i like to just compose and play full instr set in one take- not a polished result but cuts boredom
Thanks man! Do you you know if it’s possible to change the octaves of each individual instrument? I didn’t find any solution yet.
In addition: how are you able to save that “patch” when you layered the sounds that you want to use (I’m a beginner at the MPC)
@RockLobster223
Жыл бұрын
You would save the 'Project', which will contain everything you've seen here. So it's not a patch as such, but actually saving the Project is nice way of having your entire setup saved for future use.
thanks man....i got mine about 3 weeks ago and still learning new stuff every day.....im our av guy at church but also am musician and wanna help our main guy with aux keys....is there any way to always make the drums tracks ONLY on pads?
Thanks for this video, but how is it possible to save the layers and splits we create as a multi in order to save and load these multis in new projects ? Or do we have to save this as a project and reload this everytime we want to use it ? Is there any way to save it as a multi ? Vs a project ? Thanks 🙏
Is it possible to transpose one key range to a different octave without affecting the others layers or tracks? Meaning, I have a really great layout I want to use for a live performance but, I can't figure out how to play them all together at the same time. The left hand layers need to transpose an octave down but the right hand needs to stay where it is. Would be nice to be able to do an octave shift on a single layer to get the sound where you want it. Thanks, I hope you have an answer for this because I can't find anything out there that covers this subject well... I hope I'm clear on my explanation...?
does this work the same on an mpc live with a controller? can I toggle thru multiple 2 sided splits? say if I needed 5 loaded splits for a live show.
Possible open a same plug in 2 times? I need to split and layer 2 differents presets on mellotron plug in
Very mellow piano
Great video, easy to follow! ❤ Can the One and Force also do splits and layers, or only the Keys?
Can you delete all layers and leave only one? Or those for layers is a must
For musicians that dont play in all keys...it would be nice if it were possible to transpose all tracks(layerd sounds) at once
Thanks man!!
Can you split and layer samples on the keyboard? I'm thinking you might because a sample can be a track.
How do you add a 9th track with a different sound with the same plug-in?
@DSoundman
26 күн бұрын
Unfortunately it’s not possible. You’ll have to convert one of your tracks to audio to free up one of the 8 plugin program slots.
hi. if i layer multiple instruments, can i change velocity value of each instrument? so when i strike harder will trigger brass /trumpetss. .. and when played softer, just piano/pads.. thanks so much. your videos helped me a lot!
@DSoundman
Жыл бұрын
That’s a good question! I’m not sure the answer, but I’ll try to experiment a little with it this weekend.
How do make it so that you can turn the sustain pedal off on one of the tracks? Per say I have Piano and strings on the right hand and on the left a bass sound but I do not want the sustain pedal function on the bass. Only on the pad and piano. I can’t find a way to turn it off, i tried to in the midi settings for the instrument I couldn’t find a way. Is there is no way to filter that. Is there a way?
@forrestcitygroove
9 күн бұрын
tap on a track screen and scrool up screen for what paramenter you want to cut on or off like sustain hope that helps
Nice job 👍🏾. I just dropped a video on the keys today as well.💨
Can you shift an octave each sound when splitting and layering?
@WedgeHD
Жыл бұрын
So far I've discovered the best way to do this is go to the Main Mode screen, select the track you want to shift, and then set Transpose for that track +/- 12 or 24 (i.e., you can go 1 or 2 octaves up or down).
Great !
When using an external control the mpc key receives midi cc note off globally and ignores the channel and input. This causes notes to cancel each other out when playing overlapping notes on both keybeds. This makes multi timbral live use very limiting.
@fredflintstone1428
2 жыл бұрын
Maybe suggest to AKAI they change this with a software update?
@Sawtooth311
2 жыл бұрын
@@fredflintstone1428 I contacted them several times, no response as of yet.
@TubeYouTC
7 ай бұрын
I raised this issue several times to them, too. I cannot understand why it is not adressed, sounds like an easy fix. I tried to use MPC one as a rack module with dedicated Midi channel together with other devices. Not possible as Mpc works in Omni mode and reacts to all Midi channels and messages...
@Sawtooth311
7 ай бұрын
@@TubeYouTC this issue was finally fixed with one of the recent updates, at least it is for the MPC Key61. I'm assuming it should be the same across the entire MPC line.
I just don't understand why you had a drum track. I was expecting you are going to explain us how the rhythms work on MPC. Kind regards
Hi I appreciate your videos very much but I’m having a problem. when I try to later or record more then 4 sounds the 5th sound changes other sounds I’ve already layered or recorded, what am I doing wrong.
@DSoundman
Жыл бұрын
Hey, there's a little plus sign above the plugin program section that you'll have to hit to create a new plugin program. Each plugin track is tied to a plugin program and so if you get to track 5 and don't create plugin program 5, changing the sound for plugin program 4 will change track 4's sound too. I have a couple videos that walk through the recording process and I show how to do it! :-)
@DSoundman
Жыл бұрын
Here's the video showing it: kzread.info/dash/bejne/hKChz7eNiNLAlMo.html
can u change the volumes on the tracks?
@DSoundman
Жыл бұрын
Yes!
Fantastic tutorial......... i cud not get what u were saying at 11:28...'.learn mit?....learn that...'... cud not folow what u were demonstrating...... shucks....