In this video we move on to explain the remaining advanced features of your Blueface thermostat.
The Blueface allows you to control remote zones. To access a zone: press on the name of the zone to access the list of zones in the system. Change the name of a zone by pressing and holding on it to access the name editor, where you can name it as you want.
From the zone list you can check the status of each zone, and switch any of them on or off.
Press to access the zone. Once there, you can change the temperature and create/edit/activate or deactivate time schedules. Moreover, you can check the consumption of your system and change specific zone settings. To exit the remote zone menu, press the X.
Likewise, if you want to change any setting that is common to all zones, press on “All the zones” and make the necessary changes.
Depending on your installation, the Blueface thermostat displays, through the System consumption function, information on the demand period for the zone and the operation of the AC unit during the day.
You can configure the settings for each zone in your system, for example:
- Sleep mode or auto power-off timer for the zone can be set to 30, 60 or 90 minutes.
- And the Anti-freezing function prevents the room temperature in the zone from dropping below 12°C, even if the zone is off.
Depending on your installation and the configuration of your system, you may find other additional features, such as:
- Grille angle. This sets the angle of Airzone smart grilles.
- Control stages. This controls the air diffusion elements and radiant elements in the zone.
- And Q-Adapt. This allows you to define the flow control algorithm that best fits your installation.
Lastly, remember that your Airzone Blueface thermostat will also display any system warnings or incidents. In the event of a problem, any warnings will be displayed on the screensaver, on the main screen, and also in the Information feature.