Affordable PRS SE Bridge upgrade? Musiclily Ultra PRS Style Tremolo with Brass Block Unboxing
Тәжірибелік нұсқаулар және стиль
Testing out an affordable tremolo bridge I purchased from Musiclily through Lazada. This is the Musiclily Ultra 52.5mm Brass Block PRS Style tremolo bridge. Why even replace the stock SE bridge? Well this one is using CNC machined parts with a solid brass block. The stock SE bridge is a good bridge so you don’t really need to replace it, but if you just really want a sharp looking bridge with a brass block you might want to check this out.
My quick review: It’s an excellent upgrade option for PRS SE users. High quality CNC machined saddles, plate and block. Chimey tone and longer sustain. I definitely recommend it as an upgrade to the stock PRS SE bridge.
My first attempt on installation, I kept wondering why sustain was not as long as the stock SE and would go slightly out of tune when lowering tremolo to full and back. My installation was incorrect.
After fixing the bridge screws to the proper height, and adjusted the spring claw, sustain was much longer than stock!
FYI my bridge screws were 2.5mm from top of the screw to the body. Use a digital caliper to measure. Make sure springs are also not overly tensioned. Loosen just enough to float the trem slightly, tune to pitch, then re-tighten claw until bridge is completly flush to the body.
#musiclily #prsguitars #prsse #prs #brassblock #tremolo #custom24 #custom22
Пікірлер: 97
Thanks a lot for doing this video. We love it. Really appreciate your hard work~
@jaypaduadesigns
3 жыл бұрын
It's my pleasure
This video was a huge help! Thank you!
Definitely more clarity and definition, sounds brighter, but still a great degree of roundness in the tone. Works for me, great job.
@jaypaduadesigns
3 жыл бұрын
thanks 🙏 yeah, it indeed sounds better. I wanted to create this video so others may benefit from knowing how it fairs :)
@Markcio182
Жыл бұрын
Brass actually adds midrange. In this case, it was more clarity with the steel bridge.
Appreciate the demo, I was going to get one for a parts caster project. I think it doesn’t make a big difference either way. I’m going for the Wilkinson wvpc instead. I have a Harley Benton cst 24 and I’m happy with the one in it. Same bridge.
@juanvaldez5422
3 ай бұрын
Brass block makes a noticeable difference
I actually liked the SE bridge the most. Warmer, richer, and fuller sound to my ears
@jaypaduadesigns
3 жыл бұрын
No doubt they are good. It depends on the tone you are looking for. I ended up putting this bridge on my strat copy which needed it more since the PRS SE bridge are already very good to begin with.
@chekozmd
3 жыл бұрын
@@jaypaduadesigns Great! Enjoy it bro, nice work 👌🏼
@jaypaduadesigns
3 жыл бұрын
@@chekozmd thanks!
@ivanmathiasfilho2333
3 жыл бұрын
Hi, did you use the tremolo arm heavily? That's my main concern with PRS SE model.
This is a great video, thank you. I prefer PRS bridge more volume and juicy, another one also is not bad very sweet sounding.
I bought one, it is a very nice piece of hardware. Thanks for posting.
@bluwng
Жыл бұрын
It doesn’t look like the string holes in the block were deep drilled they looked shallow. Is this,true?
@davespin9034
Жыл бұрын
@@bluwng the pocket for the ball end is not real deep from what I recall. I modify blocks to lock the strings so it works like a Floyd Rose. Great bridges. Excellent quality brass, true knife edge holes and slotted screws, saddles stay put, push in trem arm.
@bluwng
Жыл бұрын
@@davespin9034 hi, I’m more interested in how you modify the block? I had so many ideas, placing a screw in the string holes, deep drilling and making a pseudo Gotoh FST style bridge plate and block holes. I believe the string binding on the bridge plate as it comes out of the block is the root cause and I also believe people have been brainwashed to believe it is the nut, 100% the nut isn’t the main reason. I’m really interested in your mods if you don’t mind sharing.
@davespin9034
Жыл бұрын
@@bluwng i am currently having a small batch of brass blocks modified, a few PRS blocks the rest Mexi Strat, which is a pretty common pattern the Kramer Baretta guitars use. I'll be selling them soon.
@bluwng
Жыл бұрын
@@davespin9034 I’m interested. How do the mods work and where can I take a look at the bridges, do you have a website?
I changed the steel saddles on my wilkinson wvpc bridge that is in a harley benton cst 24t to the musiclily brass saddles and it changed the tone for better.
@jaypaduadesigns
2 жыл бұрын
nice, im still on the steel saddles. what changed with the brass? brighter or warmer? i get mixed results depending on the guitar i have it on
@seerattan
2 жыл бұрын
@@jaypaduadesigns to me the sound is clearer and I got a smoother sustain, it dependes also on the pickups thats on the guitar, I got a harley benton cst. And the roswell sound really great. It's a good mix, the steel block and the brass saddles give a nice sound.
Just bought the pro version for my Pacifica. Unfortunately it is the Stratocaster version, because I had a lower budget, and they don't do the prs style with that string spacing for that price. Big brass block and looks amazing, but I like this one better.
The music Lilly SE brass block also fits the US CE 24 . I have one in my CE 24
awesome mate, just want to ask, how is the trem on the new bridge, is it wobbly?
@jaypaduadesigns
3 жыл бұрын
the trem bar is very snug, adjustable with an allen screw at the back to tighten or loosen to your liking
@davidperona7909
3 жыл бұрын
cool bro, thanks for your vid and responses
非常に参考になりました。 ありがとうございます😊
@jaypaduadesigns
2 жыл бұрын
どういたしまして!
Nice. But you must try guitar hardwares from Alridge Emperindo.
Can you do a video on installation and setup? Would be great
@coopercooper8406
2 жыл бұрын
Looks like he’s, uhhh, done already
Hi Jay, the 6 mountimg screws that came with Musiclily are shorter rhan the SE's. Did you install them? Any problem?
@jaypaduadesigns
3 жыл бұрын
yeah I used the mounting screws of musiclily but I dont see any issue using the SE screws if it fits the bridge it should be okay
@renygarcia6375
3 жыл бұрын
Many thanks, Jay. Great job🙂
How much did this upgrade cost?
My prs se 24 custom has fret buzz. I leveled and crowned frets, adjusted truss rod, bridge etc and there is still buzz. I believe that vuzz comes from tremolo. Did you have the similar problem and did new bridge affdct buzz?
@jaypaduadesigns
2 жыл бұрын
coincidentally, i had the same issue recently, apparently it was the nut. I cut the slot too low so the buzzing was with the first fret. I was able to fix it by removing the nut, adding wood material w superglue and sanding down again and re did the nut slots.
@KeepChessSimple
2 жыл бұрын
This can come from tremolo springs (there are videos where people fill the springs with foam), loose saddle screws, or even pickup springs!
I dunno, I feel like it actually sounded like an upgrade? Slightly clearer and brighter? I know it’s Chinese but I’m considering buying this for my SE also now!
@jaypaduadesigns
4 ай бұрын
yes it is an upgrade for me definitely, machined saddles plus the brass block really makes a difference. I have it now on my PRS SE EG!
So,, you have to completely remove the trem screws or can you just take the trem off without touching the trem screws?
@jaypaduadesigns
2 жыл бұрын
you have to remove all the trem screws to install.
Nice video! May i know where did you purchase it?
@jaypaduadesigns
3 жыл бұрын
I purchased mine on Lazada philippines but they also have sellers on Amazon :) you should try to search there. Look for Musiclily Ultra bridge
@RrDungo
3 жыл бұрын
@@jaypaduadesigns thank you! I'm planning to install it on my pacifica. Pwedeng malaman kung magkano nyo sya nabili?
@jaypaduadesigns
3 жыл бұрын
yeah measure your screws make sure na yung width from center of the screw from first ro last is 52.5mm I ended up installing on my jcraft ltx, its nice!
@jaypaduadesigns
3 жыл бұрын
@@RrDungo I got it on Lazada for P3,180 not bad! I have currently installed on my jcraft ltx check it out here kzread.info/dash/bejne/ZXao28aPlNC0lso.html
@RrDungo
3 жыл бұрын
@@jaypaduadesigns yes sir! 52.5 din, 2nd bridge swap na ito sir pag dumating, i want to try brass block equipped na bridge.
so how is the tuning stability compared to the Se one? the whole point of a trem kinda ;)
@jaypaduadesigns
2 жыл бұрын
just the same as the SE bridge. I think the main difference you get is the overall weight, and brass block. Tone is slightly different.
Sounds more in tune.
can i put this bridge on a strat as well, what do you reckon, thank you.
@jaypaduadesigns
3 жыл бұрын
Yeah It would work well on a strat! Read some good feedback on some facebook groups on this trem being used on partscasters and squiers
@davidperona7909
3 жыл бұрын
@@jaypaduadesigns ok thanks mate
@jaypaduadesigns
3 жыл бұрын
@@davidperona7909 I actually installed it on my project strat now :) its really nice
I use their Wilkinson bridges, good quality and work like a champ.
@jaypaduadesigns
3 жыл бұрын
yes musiclily produces good quality parts at affordable price ranges, perfect for guitar projects
sirrr question since may se ka at core same lang po ba ung saddle intonation screw ng core at se,? nalaglagkasi ung saddle intonation screw nung SE hehe
@jaypaduadesigns
8 ай бұрын
hmm I dont recall. Seem the same
Sir okay bng lagyan ng stabilizer ang Prs natin?.
@jaypaduadesigns
Жыл бұрын
that would be a personal preference, pesonally I dont use one
the original is steel, I've tried it, the block is sticky with a magnet.
@Igornopolis
2 жыл бұрын
It is steel indeed. Magnet sticks to it. The se saddles do do not. So probably zinc? Which is good. Too much steel and tone starts bei g a bit harsh. I will try out musiclilly brass saddles on my Tremonti se. Cheers
Looks like you used John Mann's video to help you setup your guitar... good for you ! Too bad you bought a cheap imitation tho'. You should have bought the real deal from MannMade USA. John Mann's Guitar Vault sells the direct. #mannmadeusa #johnmannsguitarvault #johnmann
@jaypaduadesigns
8 ай бұрын
yeah I did see the video, helped me a lot too. I tried this out because its very affordable. Of course the John Mann bridge is excellent, just wanted to see how this one would perform. Anyway I have it now on my PRS SE EG so far its working quite well.
I'm begging them to just make brass saddles for them too at least I need gold hardware on my silver trem to up to looks on my DC3 Even if it's the awesome phase 2 style old mild made trem The phase 2 is the phase 3 without those groves under the saddles Also must remind that weight doesn't effect tone, it's the material and how good the material is made, brass is just an amazing material of course cause it's used for horn instruments
@CocoKoi321
3 жыл бұрын
SHI T AW NO:( you hearted my comment as I kept editing it lol rip
@jaypaduadesigns
3 жыл бұрын
I believe they will come out with just the brass saddles sold separately
@CocoKoi321
3 жыл бұрын
Was gonna say it seems closest the the phase 2 style trem on my DC3 and sounds kinda similar to it
@CocoKoi321
3 жыл бұрын
It even has the edges on areas just polishes down it looks made to be comfy with the hard edges of the saddles being polished down
@CocoKoi321
3 жыл бұрын
@@jaypaduadesigns yyeyeyeyee hopefully lol and hope I could get my dam backordered S2s finally lol you be exciting me out here here wirh this stuff you meanie XD 💙 Really think this cheap alternative trem tho puts the stock one to shame on the molded crappy trems they use
Send link of this product pls
@jaypaduadesigns
Жыл бұрын
s.lazada.com.ph/s.5APLt
@joshdenise1457
Жыл бұрын
@@jaypaduadesigns bakit parang wala pong grooves yung screws?
@joshdenise1457
Жыл бұрын
does the screws of this have grooves the photo in lazada doesnt show that it actually has, will this fit a 6 screw strat?
Intro volume is 47 times louder than the contend volume.
Musiclily is junk. Bought a "Wilkinson" vintage tremolo from them and it was terrible. So what about actually using this PRS style trem - you know - as a vibrato - and tell us if it stay's in tune?
@jaypaduadesigns
2 жыл бұрын
yeah its rock solid, stays in tune pretty well. Stays in tune pretty well even after a lot of trem use or diving. Almost all non locking trems go off a few cent some really out and its an inherent flaw. Even my SE and Core trems go off a bit after a trem dive. Pulling back on the trem sets it back in tune.
@Steinstra-vj7wl
2 жыл бұрын
@@jaypaduadesignsThanks for letting me know its crap. My Gotoh 510 in combination with an well cut nut and staggered locking tuners returns perfectly in tune after heavy divebombing.
@robbie471
4 ай бұрын
Interested to understand why you say Musiclily is junk, I don't agree, the quality is exceptional and pretty much identical to the PRS brass block.
Smokes yhe prs bridges.
@jaypaduadesigns
8 ай бұрын
its pretty decent :)
Lolol cool downgrade you've got there. The PRS molded bridge is far superior to these things.
@jaypaduadesigns
8 ай бұрын
it was just a test. Re installed the stock one. This bridge ended up on my EG SE.
@davespin9034
8 ай бұрын
Actually they are high quality. I have a Santana SE with the PRS bridge and its hard to tell them apart. The guitar I installed it on is a Kramer Focus and its a massive upgrade.
@jaypaduadesigns
8 ай бұрын
@@davespin9034 yes they are pretty good
@OGStinkywizzleteats
5 ай бұрын
Depends on the tone that you're going for. The musiclily is actually closer to the core prs bridge in materials used than the se version. The se version has a steel block instead of brass. Nothing wrong with it, just a brighter tone.
Bought one from musiclily as a prs upgrade, worst bridge ever, stays out of tune all the time. Then I bought a mannmade bridge, and it was perfect, i know it is expensive. However, there is a reason why.
@jaypaduadesigns
Жыл бұрын
oh I’m sorry to hear that… it didn’t keep in tune with normal use? mine stays in tune though.