Correction - The USB Type C at the bottom of the rear I/O is 5GBPS, not 10. There's so much to remember making these overviews it's easy to slip up.

Nice overview mate, ITX boards are so tiny but certainly still pack a punch with loads of great features in that board!

@jordanash

Жыл бұрын

Thanks! Yeah man, I love them

I have this board installed in an NZXT H1 V2 case with an i5-13400F and Arc A770 LE 16GB GPU, and it's one of the best rigs I've built. Had to use the included USB 2.0 header splitter in order to use both the fan control panel and Arc RGB cable, but other than that the board has everything I need for decently high midrange gaming.

@jordanash

Жыл бұрын

Awesome! Glad to hear it's working well for you

@patto2k358

Жыл бұрын

What would take a board from this, to full high-end gaming?

@ResidentWeevil2077

Жыл бұрын

@@patto2k358 I'd recommend an i7 processor (12th or 13th Gen) and maybe a Radeon RX 7000 series card, either the 7900 XTX or even the 7900 XT. You'll want a card that has more than enough VRAM to handle current and upcoming games. Don't go for Nvidia simply because they've made it clear they no longer wish to offer cards to the average gamer.

@mozametweakin

Жыл бұрын

I'm thinking of doing this board with a 13th gen CPU. Do you have to flash the bios like you do with Z690 to support 13th gen, or is it supported from the start?

@ResidentWeevil2077

Жыл бұрын

@@mozametweakin I didn't have to but I did anyway (only because there was a BIOS update so figured it would be best to keep it updated). ReBAR is supported out of the box though, just have to ensure the proper BIOS settings are set for proper operation of I tel Arc cards (in particular 'Above 4G Encoding' is enabled and 'Legacy CPM' is disabled).

Nice video mate! Found your channel searching for this very mobo. If I can offer one piece of criticism, it would be to check the frame rate of your recording/editing equipment to really match the professional look of your lighting and setup. Keep up the good work!

@jordanash

Жыл бұрын

Thank you! As far as I know it is matching. Is there any specific time or place in the video that made you think otherwise?

Hey there! Thanks for the detailed overview of the ASUS ROG Strix B760-I Gaming Wifi motherboard. It's great to see a focus on Mini-ITX options, especially for those of us with limited desk space. The included accessories seem pretty useful, especially the extension for the front panel connectors. Could you please share some insights on your initial experience with this motherboard? Did you encounter any specific pros or cons during your testing? Your firsthand experience would be valuable for those considering this board for their small form factor builds. Looking forward to your next video!

@jordanash

7 ай бұрын

Unfortunately I've not actually got around to using this, but hope to in the next few weeks

Thanks a lot for a detailed review! Looking to move from ATX to mini-itx system and was looking for a detailed review of this motherboard. In my opinion, asus dual slot 4070 + this motherboard + 13600k will fit very nicely in nr200 from the cooler master. And there is no need in big cases if you use only nvme ssds. 4Tb is more than enough for work and some games for the average user.

@jordanash

Жыл бұрын

Glad it was helpful, that build sounds great.

@attepatte8485

11 ай бұрын

Would this mobo be enough for an i7 13700k?

@Ksordus

11 ай бұрын

@@attepatte8485 should be. But you will need to undervolt it. Too much heat for mini itx.

@jordanash

11 ай бұрын

Yeah easy, just make sure you have good cooling for it

@Ksordus

11 ай бұрын

@@jordanash thanks one more time. I have finished my build. By default, I had 4 of 6 p-cores running at 95-99 degrees under 100% load. I've changed power limits from 220-250watt+ in bios (default) to 190watt and temperatures became 85-88 degrees for p-cores. In addition, I have added undervotling using negative offset, my CPU runs cool at -0.13 offset with no issues and current temperatures are 76-81 degrees for all cores. Using full negative pressure case, have on bottom 2x Noctua nf-a12x15 pwm. Mini-itx with 13600k on full load that heats about 80 degrees. Ddr5 7200 cl32 + 4070 also runs with no issues. Small pc that can do your job in Unity editor + gaming in 2k resolution when you have free time. Damn, this is just amazing!

Nice job! Thanks

@jordanash

Жыл бұрын

Thank you!

grateful to see this review ! im now planning buying this. question tho: can this go with i5-13000k and nzxt kraken z-53? and would it be enough to cool the CPU?

@jordanash

Жыл бұрын

I'm glad! Well I've used a Kraken X53 on a 7600x, which is a lower tdp but still cooled well, so I think you'll be fine ☺

Great review! I wonder for a i5 13600k if this mobo will be a good pair, or if it will be a waste to not get a Z6/790 mobo instead, i would love to overclock the cpu a bit, a friend of mine says ASUS offers APE and that overclocking is unnecessary because of that feature. Not 100% sure yet! Altough a very nice sweet looking mobo for such a good price

@jordanash

Жыл бұрын

I honestly couldn't say if there is that support as I've not used this board yet, but I think a 13600K will work well either way, especially with the little boost over the non K counterpart.

crazy to me that the z790-i from asus is 200$ more expensive only for pcie5 on the m2 slots,faster usb speeds and the possibility to overclock a cpu..back when I was young you got a superb motherboard for 200$ thankfully i dont need none of these features and im happy with this board.

@jordanash

Жыл бұрын

It's the same difference here too. There are a lot of costs in modern boards to be able to handle such speeds and heat they require now though. My first PCs motherboard was $160

Thanks for this review. Just a small correction the second usb type c is only 5 Gbps

@jordanash

Жыл бұрын

No problem. Yep, there's so much to remember I'm bound to slip somewhere

Nice review, mate, thanks, i wanna buy this , only one question: can fit a scythe fuma 2 rev B in this beauty?

@jordanash

Жыл бұрын

Thank you! Yeah, I can't see any reason for it not to.

Nice video! can you suggest choosing a motherboard for NZXT H1 V2 using 12400f & 3060 ti between "ASRock Z790M-ITX WiFi vs Asus ROG Strix B760-I Gaming WiFi".

@jordanash

Жыл бұрын

I have this board in for almost that exact build, so I'd say this!

Are the pastel ROG accents removable? For instance on the nvme cover, is this a sticker or is it printed directly on the metal?

@jordanash

Жыл бұрын

Stuck down under plastic if I recall

Any thoughts on running this with the 13500 vs. 13600K? Naturally it doesn't support overclocking of the K, but i'm wondering if there will be a performance gain with the K anyway..?

@jordanash

Жыл бұрын

Yeah there will be a little anyway, you get a higher turbo with the K SKU if I remember correctly

@LastSecBloomer

Жыл бұрын

13600K has higher boost (+300 MHz on P-cores and +400 MHz on E-cores) and more L2 cache so yes, there will be more performance...

which 1 you suggest between these (b760i) vs asrock z790m? and what is pros cons between these 2?

@jordanash

Жыл бұрын

I've not used the other, so aside from the overclocking support on the Z790m, just Google one vs the other. That's all I'd be doing to tell you, so you just as well do that yourself ☺

Any idea which coolers fit on this board? Thinking something sub 70mm clearance, so does AXP120x67 fit or would that huge vram heatsink mess with clearance?

@jordanash

9 ай бұрын

I'd recommend looking on manufactures websites as a lot have compatibility charts. Noctua have a chart for example and they also have low profile coolers that fit it.

Do you happen to know the height of the big heatsink on the left? I plan on using the Deepcool ak620 but not sure if itll clear it thanks.

@jordanash

Жыл бұрын

I can measure it when I get a chance, but *generally* most VRM heatsinks are a standard height to clear rear case I/O cutouts, so I'm sure it'll fit. EDIT - Just looked at a pic on google and it's got loads of room.

Do you know if it's possible to enable/disable the M.2 slots in BIOS for drive isolation purposes? Good video!

@jordanash

Жыл бұрын

I *think* so, yes. Thank you!

@chriss3154

Жыл бұрын

@@jordanash Quick answer, thanks! But are you 100% positive because it's seems to be a rare feature to implement...Maybe only high end boards have this?

@jordanash

Жыл бұрын

I would have thought so, as you can with the PCI lanes on ROG boards. I can tell you for sure when I build with this in the NZXT H1, might be a couple of weeks though.

@chriss3154

Жыл бұрын

@@jordanash Ah ok, anyway thanks!

@jordanash

Жыл бұрын

No worries

with this board and the -7 12700kf what cooler would you suggest for an itx case liquid or air? im building in the Streacom DA6

@jordanash

4 ай бұрын

That can take a 280mm radiator, so I'd say something like the Bequiet! Pure loop 2, presuming all 280mm AIOs fit.

Do you think a thermalright peerless assassin 120 mini cpu cooler fit next to the heatsink? I am trying to find the right cpu cooler for this.

@jordanash

4 ай бұрын

From the pics on the site I'd say so. A lot of boards tend to be made with the same clear area around the socket. Unfortunately I don't have any of their coolers otherwise I'd try it for you.

is there no boot device ? i am new to the scene but there is no boot device listed in the accesories right ?

@jordanash

Жыл бұрын

That's down to you, it's usually in the form of downloading the windows iso, installing it onto a USB stick then using that to install onto your PC storage.

Goodevening, how to remove the cover/cooler of mosfet (VRM) when i will need to change the CMOS battery? I don't understand!! Help please.

@jordanash

11 ай бұрын

You shouldn't need to remove it. I've never needed to change a battery, so don't worry. I'm sure there's instructions in the manual though.

Would there be any issues regarding undervolt or overclocks on this bord with a 13600k?

@jordanash

9 ай бұрын

B series boards don't support overclocking

Does this need bios flashing for the 13600k or is it compatible out of box?

@jordanash

Жыл бұрын

That'll work straight out as it's they're the same generation ☺

Hi Sir, just want to ask if you encountered any problem with the m.2 not reading/showing? Thank you.

@jordanash

2 ай бұрын

Hello, I've not actually used this yet, sorry

@flxmgrr

2 ай бұрын

@@jordanash Thank you for the reply, Sir.

@jordanash

2 ай бұрын

No worries, sorry I couldn't help, see if anything here works - www.reddit.com/r/PcBuildHelp/comments/14nwfw7/nvme_m2_ssd_not_detected/

I plan on placing windows and essential programs on the M.2 on the back side, as it will be easier to add a 2nd, larger m.2, to the front in the future. Anybody see any issues with this? Would putting a cheap, low profile, heatsink on the back m.2 cause any issues (like with spacing)? How hard would it be to add the back side m.2 after the pc is built?

@jordanash

Жыл бұрын

Sounds good to me, heatsink is a good idea if it fits. The only issue I can see with the back side is the case you use, you'd more than likely not have access after, unless you take everything out.

@yinzer

Жыл бұрын

@@jordanash Thank you.

hi have you already tried to undervolt your cpu with this MB?

@jordanash

Жыл бұрын

Not yet, but it's a B series, so it's unlikely to support it anyway.

Anything that comes with the name Strix by Asus is simply top tier!

@jordanash

2 ай бұрын

It seems the strix stuff is mostly positively reviewed, it's not perfect though

@venk11

2 ай бұрын

@@jordanash I mean for gaming it can really be top. Don't know for the other stuff. I had tuff and strix. The tuff is like their middle tier while strix is top for me personally for gaming experience.

@jordanash

2 ай бұрын

Generally Tuf is a great price to performance where strix has more emphasis on appearance too.

Would a Noctua D15 fit with that heat sink so close?

@jordanash

11 ай бұрын

Don't see why not, it's a standard mounting system. Noctua has a compatibility chart on the site btw - ncc.noctua.at/motherboards/model/ASUS-ROG-Strix-B760-I-Gaming-WIFI-5826

Do you know if this board can undervolt the cpu and support overclocking?

@jordanash

10 ай бұрын

B series boards don't support CPU overclocking.

@falcon6329

10 ай бұрын

@@jordanash Im confused, I have seen videos where they say that intel now allows overclocking on newest b series motherboards and even on intel official website also shows that its supports cpu overclocking

@jordanash

10 ай бұрын

There are *some* motherboards that allow it, mainly from MSI. Asus do have a couple, but they're very specific ones with external clock generators, but generally speaking overclocking isn't a thing for B series boards. If you want to overclock that much, get the a Z series board.

@falcon6329

10 ай бұрын

@@jordanashI ordered this exact motherboard. Now I need to wait for a cpu and test if its possible. I really just want to undervolt the cpu.

@jordanash

10 ай бұрын

Okay dude

hey is it possible to run on this board a i5 13600KF with a 4070Ti and a NZXT Kraken X63 cooling system?

@jordanash

Жыл бұрын

Yeah, sounds good

@hansgruber2710

Жыл бұрын

Thank you for help :-)

Maybe it's just me, got 3 of this, all defective (1 from Amazon, 2 from Microcenter). Gotta returned them all, went with the MSI B760i, never had an issue. MSI make the best boards

@jordanash

11 ай бұрын

Oh that's very weird. What was the actual defect?

@truonghuy9611

11 ай бұрын

@@jordanash First one, one of the NVME socket failed. Second one had the red LED when I turned on the PC, nothing but a black screen. Third one was the random shutdown/restart every time boot up the computer.

@jordanash

11 ай бұрын

Oh very odd. I just asked as I was wondering if there was a common problem between them, but that's a real mash of issues

@TDamsma

7 ай бұрын

Same here, one just stopped working after exactly 5 months. Amazon and Newegg customers reviews filled with people complaining about this board. I have just sent it back to the store. Hopefully, they will listen to my request of not sending a new same board. I requested the gigabyte aorus version. It's not you 😉

@truonghuy9611

7 ай бұрын

@@TDamsma MSI make the best boards, never had a single issue. Gigabyte and ASUS just have too much issues to deal with imo

Please help. Have this board. Tried to install deepcool AK620 to it. The cooler backplate will not fit as the rubber feet interferes with the motherboard components. Would I be able to use the same cooler with a different backplate?

@jordanash

4 ай бұрын

What does it interfere with? Some backplates can go over parts without any problem. But you could use another as long as the height and thread is the same, yeah.

@mugglepower

4 ай бұрын

@@jordanashSo you know what I'm talking about with the backplate right? its the piece that goes on the other side of MOBO and supports the CPU cooler, on my Z790 board the area where the four plastic feet on the backplate contact the MOBO is clear, and it fits flush. But on the ITX board there are little transistors/resistors right under one of the feet so it doens't even fit at all.. gonna go to microcenter again today,.,,, five mile walk...

@jordanash

4 ай бұрын

Let me look at mine and see. What I mean is some backplates can go over the top of the SMDs can be used without an issue.

@mugglepower

4 ай бұрын

@@jordanashyes yes. its the SMDs, surface mounted devices that interferes. Unfortunately this deepcool plate does not accommodate them. Its real shame because the size and compactness of the ITX board is mouth watering. I would KILL for something like this five six years ago. Anyways. Gonna go to the store again in a bit and see what else they got. Hoping I could just get a different plate.

@jordanash

4 ай бұрын

I've just tried a Deepcool AIO backplate, chunky isn't it. On the top left as the flip the board over? Personally I'd still use it as it's sitting flat, but it's up to you. *OR* get the saw out and trim the area around that post.

Would it be ok to pare it with 13700f? Could those VRMs support CPU?

@jordanash

Жыл бұрын

Yes, no problem ☺

@BadaBing_

Жыл бұрын

@@jordanash Thanks mate

@jordanash

Жыл бұрын

You're welcome

One annoyance with this board, the upper screw on the M.2 at the front doesn't work. The screw just spins and doesn't attach. Doesn't matter much, the other two attach fine so shouldn't come off, but it's just annoying.

@jordanash

9 ай бұрын

That is annoying, how odd

Which aio is compatible with this beauty? 240 or 280

@jordanash

Жыл бұрын

This will take any size AIO, it's more the limitations of what your case is mate ☺

@FedericoFilaVaudana

Жыл бұрын

@@jordanash can you say me which one is good compatible with this motherboard for a i9 13900k?

@jordanash

Жыл бұрын

Corsair H50i, Kraken Z73, RYUO III 360 to name a few

@FedericoFilaVaudana

Жыл бұрын

@@jordanash something with 280?

@jordanash

Жыл бұрын

All of those have 280mm versions

Can i pair this with i9 13900kf and rtx 4070

@jordanash

Жыл бұрын

Yep, just remember there's no overclocking support on B series boards.

can i use this motherboard with 13600k and undervolt it without losing performance?

@jordanash

Жыл бұрын

You won't be able to underclock, B series boards don't support undervolt/overclocking.

@northking2317

Жыл бұрын

Yes you can apperantly

@blindman8093

Жыл бұрын

@@northking2317 have you tried it bro?

@northking2317

Жыл бұрын

@@blindman8093 No I have not tried it myself but after researching on the internet I learned that you can switch something in the bios called a microcode to 0x104 which then allows you to undervolt. I have seen a couple reddit posts that were able to lower their tempretures while maintaining similar performance there is also a vietnamese yt video doing the same thing on a asus B series board. I will be buying the 13600k and combining it with this MB around 16th ı can update you the results if you want

@AbdulAlhazred

Жыл бұрын

​@@northking2317 so, can you undervolt on this mobo?

had alot of problems with this mb, hard to start up ,

@jordanash

4 ай бұрын

Ah that's a shame, sorry to hear that.

does it have bios flashback?

@jordanash

11 ай бұрын

If I didn't mention it, then unfortunately not

Where is the battery located?🤔

@jordanash

2 ай бұрын

Just had a look and it's under the rear I/O Heatsink, just four screws to get the cover off - i.imgur.com/ZFg5e8l.jpg

Can I use ddr4 3600mhz ram on this motherboard?

@jordanash

5 ай бұрын

Someone didn't watch the video... 3:43

@Raven-bj8io

5 ай бұрын

😂😂 thank you

@jordanash

5 ай бұрын

I spend hours sometimes days making these videos to include all the key info, please watch it first

At time 1:12 you say 170cm, don't you mean 170mm?

@jordanash

Жыл бұрын

Yeah 😂

Coil whine?

@jordanash

Жыл бұрын

More a GPU thing than motherboards. Only ever heard of a couple with coil whine in the hundreds out there.

@TheMavicz

Жыл бұрын

😅😂 this Is a mobo (Founders editions cards mostly coil wine

can it run 14th gen cpu?

@jordanash

7 ай бұрын

It'll need a bios update, but yes

@jovannyrodriguez2846

5 ай бұрын

@@jordanashCan it update while the 14th gen cpu is already installed?

@jordanash

5 ай бұрын

Not sure on that one, sorry

Can I use 14th gen in this motherboard?

@jordanash

5 ай бұрын

Yes but it'll need a bios update

@andyaung8293

4 ай бұрын

@@jordanashis it possible to do a bios update without a cpu? Can I do the bios update with the 14th gen cpu inside?

@jordanash

3 ай бұрын

Sorry for the late reply, unfortunately the "Responses with new replies" doesn't bring them to the top, I still have to hunt for them based on time. It seems this needs a CPU for an update. *Sometimes*, you can update with the newer CPU installed, it just comes up as a different SKU until the update is complete. But to be certain I'd recommend asking the company you're looking to buy from what revision it's on before you buy.

i think this board can undervolt now the 13th gen cpu.

@jordanash

Жыл бұрын

I will try it in my NZXT H1 build.

@blindman8093

Жыл бұрын

@@jordanash yes please much appreciated. i saw some people in reddit undervolt it. they do some specific things to able not reduce the performance while UV

Is it true it is 14 Gen compatible?

@jordanash

Ай бұрын

With a bios update yeah

@Joshuabailnis

Ай бұрын

@@jordanash Appreciated, thank you.

@jordanash

Ай бұрын

No worries. If you're using a 14th gen straight away, it *might* work straight away but just register as a different SKU until after the update

@Joshuabailnis

Ай бұрын

@@jordanash Thanks again, I'll reply with a result when I complete my build. 🙏

@jordanash

Ай бұрын

Great, hope it goes well.

Z760i for 13600k is best ? Cooler master nr200p

@jordanash

Жыл бұрын

So you mean B760i? That will work well, just remember there's no overclock support on B series boards.

can i use this with a i7 13700k? and this Ram CORSAIR VENGEANCE DDR5 RAM 64GB (2x32GB) 5600MHz? with this motherboard?

@jordanash

11 ай бұрын

Yes, just remember what I said about no overclocking support on B series boards

@orphanorbe

11 ай бұрын

@@jordanash so there’s no XMP?

@jordanash

11 ай бұрын

Yeah, just no CPU overclocking

@orphanorbe

11 ай бұрын

@@jordanash what mother you recommend me for overclocking?

@jordanash

11 ай бұрын

You don't have much choice if you need a ITX motherboard. I'd look at the ASUS Z690-I, if you can find the older board it should be cheaper now there's the Z790-I

"...because there's so much heat in a small form factor" Check yourself man, that is simply not necessarily true! I've built those ever since they became a thing. Just have to know what you're doing.

@jordanash

Жыл бұрын

Well I want to make sure people don't try putting overkill parts in things that can't handle it, that's all

This is your first video that I have watched. You need a pick me up bro. You sound so zoned out like you dont give a toss. I'll give you a 2nd chance though.

@jordanash

7 ай бұрын

I just don't like being over the top and forcing stuff, I like making chilled content as that's how I am in person. I think I seem alright in this 🤷‍♂️

dont get into asus i bought the generation before this one and my mainboard runned into warranty... and asus is a nightmare .. they refused my warranty with saying its my fault that its damaged but it came even more broken back.. just my exp with customer support .. or just an advice.. they do premium products, fancy design but dont get into warranty ...just sayin!

@jordanash

4 ай бұрын

Ouch, sorry to hear about that, what a naff experience

''affordable'' lol

@jordanash

Жыл бұрын

It is compared to the Z790 version...

Hi! I have this mb and my pc restarts every time when I get in bios or run memtest86. What’s wrong? I checked with another ram and psu. And the same result:(

@jordanash

Жыл бұрын

Can you try updating the bios? Sounds like it might not like the RAM you're using. An update might add support for it.

@user-mz8lr2ny4n

Жыл бұрын

@@jordanash I updated bios. Changed 3 different rams(they supported on the rog site) and nothing helped

@jordanash

Жыл бұрын

That's very odd, have you tried clearing cmos?