Casually launches rocket in a town

@danyael777

3 жыл бұрын

ikr? I love how the neighbors have the lids closed^^

@incubusfan4211

3 жыл бұрын

casually hopes town is hit by rocket...

@stevejohnson1685

3 жыл бұрын

Casually tests rocket fuel and ignition systems in a wood-framed attic :-)

@EzequielPR

3 жыл бұрын

Thats something China would do

@kevinnistor1954

2 жыл бұрын

@@incubusfan4211 woah

Pro tip on the rocket fuel: Don't use plain table sugar. Use Sorbitol. It has a smoother burn rate and lower pressure. Also, mix the two ingredients with enough water to dissolve the sugar and heat them in a pan (VERY LOW HEAT!!). Once evaporated, you will have a lightly brown, thoroughly mixed fuel. Pour that into a mould the same dimension as your rocket cavity greased and lined with a thick paper tube. When it cools push out the fuel slug (grain as they are called) and you are ready to go. The paper tube and tight fit will help keep the flame from going around the outside of the grain and causing a pressure spike. If you need more power, push a rod into the middle of the grain before it cools. This hole will create greater surface area for the flame and the fuel will burn faster. For an even faster burn, create multiple grains. You can use these parameters to raise or lower internal pressure to suit how much your rocket can withstand. Check out Richard Nakka's site for all the information you would ever want to know about experimental rocketry. There are a ton of resources there for anyone who is curious.

@hassiaschbi

3 жыл бұрын

It also has the orbit in it, that alone makes it three times as potent☝🏻

@kaysimpson

3 жыл бұрын

excellent suggestion!

@angulini

3 жыл бұрын

i have to add some safety corncern about the tecnique you discribe for the pit and melt the sorbitol ill suggets to use a doble bath call baño maria. just to not get the mixture in contact with any hot flame or stuff that mixture from 90 degrees it self ignite trust me i have experience

@angulini

3 жыл бұрын

allso ill suggets to use a rasing base redox fuel that are more powerfull and more safety

@donky335

3 жыл бұрын

This can be extremely dangerous and he can use normal sugar just needs to make it in to a powder e.g. A ball mill

so underrated channel

@soggybanana4757

3 жыл бұрын

i know, right?

@yoloboogie3674

3 жыл бұрын

he has more than a quarter of a million subscribers, not “so underrated” to me

@exotikinc3397

3 жыл бұрын

@@yoloboogie3674 Most people who make shit content have like 10m subs 😂

@yoloboogie3674

3 жыл бұрын

@@exotikinc3397 most? name 25 then there’s over 100 million channels that make shit content, i’m just asking for 0.00000025%

@exotikinc3397

3 жыл бұрын

@@yoloboogie3674 I don't know that many channels, I do know nikkitutorials, Morgz, ninja, t-series, Casey neistat, faze rug/rice gum, Jake Paul, and many more.

I love that joke at the end! too many people would be too afraid to do that.

@sharansavakar8569

2 жыл бұрын

The hitler impression?

@mr.disorganized6287

2 жыл бұрын

@@sharansavakar8569 Yes!

@mtmadigan82

2 жыл бұрын

Lol yeah got a good laugh out of it.

Theme: a 3d printed vacuum cleaning robot that can also mop. Also intelligent enough to not mop carpets. Get us to 2k likes and Integza has to kiss a tomato...on his next video! 😂

@adequitevelocity1089

3 жыл бұрын

A rocket powered one

@odunt007

3 жыл бұрын

@@adequitevelocity1089 where do you wish to vacuum? the moon? lmao! But i do like the sound of that though! aha!

@adequitevelocity1089

3 жыл бұрын

Maybe

@christianletzerich6523

3 жыл бұрын

Well sjit, printer secured man

@odunt007

3 жыл бұрын

@@christianletzerich6523 we'll see aha

One of the best things that happened this year was discovering that channel. Thanks for making my days a little easier

@TheDryOneGaming

3 жыл бұрын

Build a ground effects vehicle using one of you engines

@onlinehelper374

3 жыл бұрын

Definitely

@dogo7543

3 жыл бұрын

uhh 666 likes... is this a sign???

@f-16storm39

3 жыл бұрын

@@dogo7543 I changed it, now it's 667

RIP, Grant Thompson. Thought of him when Integza was talking about sugar rockets.

@beaconblaster33

3 жыл бұрын

same

@mattspringer1327

3 жыл бұрын

Yes same here.

@SC-RGX7

2 жыл бұрын

Same

If you are familiar with the film 'Hunt for the Red October' the plot focuses around getting a Russian sub with a new type of propulsion system called a "Caterpillar" in the movie. If I remember right it basically used an Archimedes screw to propel the submarine with little to no cavitation, thus making it run silent. That would be kind of cool to explore.

dude but you hadn't made a rotary engine yet, had you joined a challenge to make every type of them ? br br br br br br vroom vroom DeLorean was about to had one, in a concept

@doit597

3 жыл бұрын

since you made a rocket... and joined a space race.. you should make an anti-meteor safety system!! or.. the at least a Home Anti-Theft, anti-intruder system, crazy amount of crazy rockets will surely handle it hehe

@doit597

3 жыл бұрын

Integza, can you make a camera? i saw somewhere a 3D printed lens body. that's might be fun

@doit597

3 жыл бұрын

and also, when you will make a video with Ivan Miranda?

@joeflosion

3 жыл бұрын

Enjoy that 3d printer dude. Best idea I've seen

@justsomebigfootthe3rdwithi795

3 жыл бұрын

I think u won

You have to be really careful with those things. I was just walking around my neighbourhood recently, and was hit on the head from one out of nowhere. Now my vision is blurry and all I can smell is caramel wherever I go. I didn't really see where it came from, but a passerby said it looked like it was launched from a roof about 300 meters away. All I'm saying is stay safe!

@integza

3 жыл бұрын

You cracked me up ahahah

@trustmeimapotato4708

3 жыл бұрын

@Norm T launched a Goat? How far? Bro you gotta give us the details on this 😆 🤣 😂

@patrikgubeljak9416

2 жыл бұрын

@@integza rI'm sure someone like you can easily and quickly make a decent ball mill which will grind your powders to a much finer one. I did a little research project in high school on how to make rocket candy more powerful, by looking into sorbitol, mannitol, xylitol etc. instead of sucrose, and also by adding sulfur and metal powders such as Al and Mg to the mix. Mannitol, a bit of sulfur and very fine Al powder (which you should make by grinding charcoal and Al together in a ball mill, so the Al doesn't oxidise) was the best one. Don't know the exact ratios of the top of my head.

Hey Ineska, just want to let you know you are a bright light on this gloomy globe and you continue to inspire me and through my my community to be positive, have fun and make it achieving great things that little bit easier. Thanks Buddy! Keep up the good work/life! Brilliant

For anyone not living in Europe, please take a time to admire those beautiful buildings around Integza's balcony. So lovely.

Bruh he just straight up launched exploding rockets in the middle of a city My kind of guy

@yourmusic9452

3 жыл бұрын

hahahaha that was cool

@1STGeneral

3 жыл бұрын

And no one cared what a country

“She likes k-pop and I like explosive engines” y e s

I absolutely love the mix of humor and science you have here. Well done 😍

Looking back on all the videos I watched from this channel has made New Years all the more pleasant. I'm really glad I discovered this channel a few months ago!

Theme: make steerable rocket with liquid fuel, or maybe (perhaps more attainable) like a multi-stage rocket. Also I'm no expert but maybe next time launch the rocket somewhere a little less populated haha :) I laughed so hard when I saw that EDIT: If I win the printer, I will learn fusion 360, design and print a tomato, and take a bite out of it. Let's make it happen.

@daives01

3 жыл бұрын

Yeah no scratch the very first one, multi-stage rocket is a way better (and possible) idea

@manuellira4089

3 жыл бұрын

stop hacking likes to win

@stevecummins324

3 жыл бұрын

Hybrid rocket... Plastic as a fuel. Decomposing of hydrogen peroxide as oxidised. For steering... Spin rocket, and let extra gas out on side of rocket. That changes the direction of thrust.

@daives01

3 жыл бұрын

@@stevecummins324 clearly you're smarter than I am haha that sounds cool

@manuellira8854

3 жыл бұрын

@@daives01 hey ok I trust you but can you and your people help my friend to win please its name is santiago larrain and his comment is no more than 2 hours ago plaese??

Theme: You should build a miniature manual transmission!

2/3 rockets exploded “calls himself a rocket master”

@kerbodynamicx472

3 жыл бұрын

That’s probably what happened at SpaceX too, I mean you’re dealing with the one of the most dangerous device on the planet

@danielsteger8456

3 жыл бұрын

@@kerbodynamicx472 nuclear scientists

@Halfstep2024

3 жыл бұрын

Your standard X Ray tech is in more danger daily than a rocket scientist

It makes me so happy to see one of your designs work! I enjoy watching these videos man please keep them up!

Theme: Electric Jet Engine (turbojet or with air bypass). Use a brushless motor from a vacuum cleaner (100k rpm) to drive a compressor. Jet fuel on the combustion chamber and don't use a turbine at the end. Let all the hot gases get out of the nozzle! This could be a cool project!

@user-fy8oi5me9m

3 жыл бұрын

👍

@noctecordivesalus9319

3 жыл бұрын

Yes, why not

@user-le7gs9rv9j

3 жыл бұрын

This is the worst idea i've heard in my entire life.

@noctecordivesalus9319

3 жыл бұрын

@@user-le7gs9rv9j hahaha bro, u crazy crazy

@DeliciousDeBlair

3 жыл бұрын

Your idea is easier than mine! [actually I am already planning how to build a fully ceramic composite jet engine housing at full scale!] I just want to see if the ceramic can handle the heat too! /)/) ( 'ˬ') @(>_ )-b \) \)

You can 3d print ceramic parts? And you chose to make an aerospike? That is so freakin awesome!

@integza

3 жыл бұрын

How dare you??? NO ! YOU'RE ARE AWESOME! AH! GOTTA GOOD

@UNITYMusics

3 жыл бұрын

@@integza ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

@toepunch001

3 жыл бұрын

Bigger aero spike needed

@EngineEnginer

3 жыл бұрын

@@integza zrub to z ceramiki lub z masy solnej

@botondpongracz9851

3 жыл бұрын

The ceramy cant withstand the high pressure

Theme: create a piston that entirely runs on rocket engines

@keybored13

3 жыл бұрын

no

@ps-uj5dm

3 жыл бұрын

Yes

@beaconblaster33

3 жыл бұрын

kAN made one is Scrap Mechanic

A University in Hull, England is doing something interesting that you could use a 3d printer for: They are experimenting with using compressed air flowing over a rod (perpendicular) to direct the jet of air to use as dynamic controls. When the air passes over the top of the rod, boundary effects pull the air downward as it leaves the device. Downward movement of the air acts like down aileron on the wing. Passing the air under the rod has the opposite effect. You could also use the printer to experiment and make better propellers for RC aircraft. I would try to make a Prandtl style propeller for greater efficiency and reduced noise. Would be handy to have these on a quadcopter drone to reduce noise.

Integza: "This video does not have a happy ending." Me: *grabs popcorn* "This is what I subscribed for."

Theme suggestion: You have been working so hard to create a good pulse jet/rocket engine, why not put your knowledge and hard work to the test, make a plane powered by one! It has to be able to carry its own fuel, and have at least 30 seconds in stable flight. Along with this, another idea is to use your micro controller skills to rig it with a functional steering system. Then you can try your luck at perfectly crashing it into a tomato.

I've always wanted to build Rockets but you've inspired me to actually do it. Thank you integza.

Theme: make a full-flow staged combustion engine. Beat that Elon's raptors!

Integza: i dont wanna buy a kiln cause its tooo expensive Also integza: so basically i am giving away three 3d printers

@alphabravo3683

3 жыл бұрын

Hmmmm... how about building a new kiln using Aerogel or aerated-concrete. It seems to me that if you want to get more extreme ceramics might be in your future. Post Hmmmm - if you 3d printed a ceramic kiln liner that could be the foundation around which you could place the insulation.

@adriansaidan1736

3 жыл бұрын

@@alphabravo3683 printing the lining is massively cost prohibitive. 3D printing excels at producing items of complex geometry for cheap (compared to tooling up for mass production or machining traditionally) but it is not the tool for bulk material (such as furnace lining). Just one liter of SLA resin costs anywhere from 60-150$, and given that ceramic resin is likely a lot more advanced than conventional resin, i would not at all be surprised if a bottle surpassed 150. On the other hand, kaowool lining (refractory wool) can be had for about 100$ for 24"*12"*2" which is sufficient to line a small furnace in its entirety.

@robantsin

3 жыл бұрын

@@alphabravo3683 Could also make one(a kiln) with some starlite material for very cheap, technically a forge but you could dial back the heat to turn it into a kiln. reference video kzread.info/dash/bejne/eKF5xJOSirbJqMY.html

@thorodeus1

3 жыл бұрын

maybe he just prints the 3d printers???

Use a small rocket to lift a steel cable deeply conected to earth in the middle of a storm. Have a bucket filled with salty water between the earth and the cable to instantaneously create HHO when the thunder strike the steel cable. And admire a nice explosion ! :D PS : Do not do this from your balcony this time :D PS2 : This ceramic resin looks awesome PS3 : Upvote if you wanna see the world (or bucket) burn !

@helkate6274

3 жыл бұрын

Ridders on the storm

@CaptainKwak

3 жыл бұрын

Here's a salty comment for you

@casamientopilarychristophe9752

3 жыл бұрын

Or better, use a pure silver wire!! :O

Great project, great comedic timing, great guy overall! You gained a subscriber, keep going!

I really hope to see more of this project! I love that you're going with the aerospike design!

Integza, I have 2 challenges for you! 3d printed flamethrower Or A fully 3d printing EDF ( Electric duct fan basicly a electric jet engine) only parts excluding parts are wiring and stator shaft Maybe use ceramic resin for the rotor and carbon fibre filament for the casing?

@conor123459

3 жыл бұрын

You beat me to it...

@conor1475

3 жыл бұрын

Didn't he do that all ready? 🤔🤔🤔🤔

@evilvsawesome

3 жыл бұрын

@@conor1475 I don't think so, maybe tho, I thought it would be a cool idea

@evilvsawesome

3 жыл бұрын

Maybe to make it Christmasy. make it look like a sled or make a few and lift a mini tree 🌳

@jas7915

3 жыл бұрын

Yessssss

“Like that smash button”

@markuscubz

2 жыл бұрын

Liked for that ‘smash’ button

@Randomperson0467

2 жыл бұрын

You mean smash that like button

@reagank.2268

2 жыл бұрын

@@Randomperson0467 NO, I meant LIKE that SMASH button!

That rocket exhaust out of the aerospike was absolutely gorgeous!! I'm sure you got a big sense of pride when seeing too knowing something you made did what it was designed to do,mostly!

The world needs more of you and people like you. With sound legal counsel, I'm certain you will find financial reward with some of these ideas of yours. Not sure how patents work in your country, but you should patent every single original design. Ceramic coating in those rocket bodies, with perhaps a metal sleeve insert, and you have a policy changing device. I speak where I should not. I am your pupil for now, and I thank you.

I see Inetgza's neighbours are smart enough to have boarded the windows facing his house.

My psychologist: Mustacheless Integza is not real, he can't hurt you. Mustacheless Integza: 14:20

@TAlexBlack

3 жыл бұрын

He looks like a young Till Lindemann!

@andredepaulagomes

3 жыл бұрын

@@TAlexBlack thank, now I can't unsee that haha

I like the way in the sponsor bit, he says you have to actually ride a bicycle to understand it, then shows an animated astronaut...guess I'll never know 🤣

At the beginning of the video: "This video doesn't have happy ending" The fact: Funniest part ever wkwk

“Noooooooooo” Jorge’s motto from here on out.

@villa1n663

3 жыл бұрын

hehehe

@muhammetfurkan6818

3 жыл бұрын

I need that printer dude!

@jurajkolesar1894

3 жыл бұрын

You comment on every science video i watch lol

@brennonthornton5348

3 жыл бұрын

U should build a vehicle that runs on a HHO generator

@_Garm_

3 жыл бұрын

"Ha ha ha, Let me show you its features"

Yo integza, Make a rocket with tomatos inside , so if it fails atleast the tomatos will be destroyed so no loss!! Remember kids , tomatos as the most DISGUSTING guuy thing in the world.

@aerotecrc9308

3 жыл бұрын

Lol enjoy your printer mate

@sanjeetdebnath9807

3 жыл бұрын

My he so hated about a tomato leave him alone man

@sourabhdebnath836

3 жыл бұрын

Mmmmmmmmmm

@vitansiru9198

3 жыл бұрын

I want the 3d printer give me plz

@mittinbhagu1382

3 жыл бұрын

JORGEEEEEEEE

Fantastically entertaining videos Integza! A helpful tip though - your rockets will go in a straight line if you make sure that the rocket center of thrust is forwards of the rockets center of area

@Iamlurking504

2 жыл бұрын

Also spinning stablizez it.

You’re videos keep getting better. Parabéns! :)

Why don't you build a machine that makes surgical masks, it could be very helpful in this period! Or maybe build a vacuum machine that makes tomatoes explode, cos' tomatoes are fricking disgusting ahaha ... Tomatoes are disgusting!

@losthandle007

3 жыл бұрын

idk why but everytime i write machine my smartphone corrects it in macchin lmao also vacuum*

@theblueguy6009

3 жыл бұрын

That's a nice idea

@NaughtyShepherd

3 жыл бұрын

*Surgical Slap that phone

@losthandle007

3 жыл бұрын

@@NaughtyShepherd i Will 😂😂😂

@losthandle007

3 жыл бұрын

@Joshua Denning because they are disgusting eeeew

Two videos in two weeks? Awesome!

@carsonclark1806

3 жыл бұрын

I know right!!

We've made large "Bottle Rockets" using sugar rockets. Tubing for the engine was generally cardboard tubing used to ship paper documents or blueprints. Just that and a long stick, these suckers sailed.

Try reinforcing the bottom part where the pressure builds up with metal rings. That could help prevent them from exploding if you make rockets again in the future.

You should definitely do more videos using sugar rockets. I have 2 themes: you should upscale the rocket and attach a parachute. And you should attach the smaller rockets to an RC car or plane and use them as missiles.

Theme: rocket that doesn’t explode and potentially has a parachute.

Thank you for your vidéos.An idea for your tests of plastic jet engines : if you put the engine in water, the plastic will not melt for a long time.

the ciramic part looks like a heatshield that astonauts use to get back to earth, nice video man!

Amazing Video!!! imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao. You have a rocket now, why don't you build a moon rover? So you can use solar panel too. Not a real one, but a little space roover with arduino stuff

@theblueguy6009

3 жыл бұрын

imagine you are Integza's neighbor and one day a rocket falls on your head... and the next day the same thing happens lmao

@redissus9080

3 жыл бұрын

jajajajajajaja his neighbors hate him 😆😆😆😂 🤣😂 🤣😝

Theme: DIY kiln, seriously I just want to see more of this ceramics printing!

Glad I found your channel today! For a theme it would be awesome to add a launch escape system to your rocket. Secondary theme: tomato seeking rocket for maximum tomato destruction.

So I used to make something.similar to this when I was a kid, about 30 years ago. I found that one way to get a nice even consistent burn, was to melt the potassium nitrate, and sugar mixture, and pour it into the rocket. When it cools, it's a solid. Also, I used rolled paper for the rocket body, since we didn't have 3d printers.

Theme: Giving all us subscribers free 3D Printers!! (He said he would do the themes that win, lol)

@gladosthegiant5761

3 жыл бұрын

Please vote for this theme, it ought to be a good one :)

@ekhiw

3 жыл бұрын

Pro gamer move

@gladosthegiant5761

3 жыл бұрын

Portal: GLaDOS says you get cake if I get 3000 likes #thecakeisalie

It would be awesome if you make an Trebuchet

3D printed sub drone !!! Love your stuff, and keep the moustache (I am french and we love moustaches)

Absolutely great videos. Keep them coming, good sir.

Project Idea: GROW YOUR MUSTACHE BACK! It looks great, never shave it off again!

@jasonsummit1885

3 жыл бұрын

Or grow a Tesla moustache😁

@NICEFINENEWROBOT

3 жыл бұрын

@@jasonsummit1885 But he is not an imitator! And Tesla never was! So - to be like Tesla, never be like Tesla!

Try making a 3d printed gasoline engine for your next video. And never ever shave again!😂 If I get 1k likes Integza has to eat a tomato. ⬇️

@strykegaming5692

3 жыл бұрын

Looking forward to it 😂

@calebconneely485

3 жыл бұрын

Not funny Didn’t laugh

@guyg4801

3 жыл бұрын

What? You don’t want to see him eat a tomato?!?

@guyg4801

3 жыл бұрын

Y’all better like this comment

@anshuln.2374

3 жыл бұрын

Remember last time he said he’d eat a tomato he didn’t

Great chanel! It is amazing seeing someone combining knoweledge, entertainment and visual in one video. Theme: solar concentration mirror, Stirling engine, electric generator. 🤓😁 Greetings from Portugal! 🇵🇹

Love your channel, your failures (what us tinkerers call "learning moments") and your great sense of comedic humor. However I have to side with your tomato overlords, they are delicious and awesome.

This dude rolls the hardest R's I've heard in an ad ever. Nice.

@WingofTech

2 жыл бұрын

Tis’ the Power of the Portuguese

@apocadood2099

2 жыл бұрын

@@WingofTech ngl I thought he was Italian

@WingofTech

2 жыл бұрын

@@apocadood2099 Understandable, the more Latin, the rollier ‘R’s I think. :3

@purpleguy6973

Жыл бұрын

hard R's for life 😏😏

[Video Idea] Make a skateboard or bike powered by rockets :)

@joaotomas8906

3 жыл бұрын

@@czrptr6849 🙏🙏🙏

@JoaoRodrigues-kv9lu

3 жыл бұрын

dps emprestas

@joaotomas8906

3 жыл бұрын

@@JoaoRodrigues-kv9lu empresto mm

@joaoreis1131

3 жыл бұрын

*Skateboard goes skkr*

@afonsotavares4305

3 жыл бұрын

I want to see it!

new theme: particle accelerator, make us some black holes!!!

Nice first downrange test for the Integza Space Program!

Why don't you build a kiln? You could use those white bricks they use in forges. Add a temperature monitor and an arduino... bob's your uncle you have a controllable kiln!

@CommHawk

3 жыл бұрын

I suppose buying a replacement or getting one second hand is more practical, but isn't the point of the channel to be creative and do things your own way?

@lastninja4661

3 жыл бұрын

How sexy

@CommHawk

3 жыл бұрын

@@johngoldberg8949 It's less about reinventing the wheel and more about being able to do something for yourself. I'd be more interested in watching a video where he makes the rocket, the propellant, and the nozzle rather than just buying an optimized setup and showing it off. It all comes down to personal preference but I was drawn to this channel because of it's creativity and willingness to fail.

@CommHawk

3 жыл бұрын

If his 3d printer broke I would want him to fix it in a quirky and interesting way too. I have nothing against store bought but making something cool simply because he can is just what I've come to expect from him. Someday everything breaks; if you can, I believe you should fix it.

Next theme should be a magnetic rail gun, would be really cool

@zacharymetz9975

3 жыл бұрын

@Degrasword call it an orbital payload delivery system test

Build an entire 3D vehicle engine that could fully operate on its own. That would be epic! I personally want to try it. Like part for part of an entire vortec engine that's usually in a Chevy truck. Awesome!

Hey Integza, I love your videos. I think recreating a mini electric car that uses solar panels to charge as it goes would be a fun video topic.

Next video idea: Collab with Joe from BPS.space and design a custom motor for his model rockets.

"I still have a lot to learn when it comes to rockets. Especially in terms of safety." integza's neighbors, currently ordering rocket-proof umbrellas: you can say that again

@derchesten

3 жыл бұрын

Portuguese intelligence noticing a sharp increase in rocket proof umbrellas in the area: "ladies and gentlemen, we got him"

Solid rockets most often explode due to defects in the fuel, which allow the burning front to access a larger area, causing an increase in pressure, causing faster burning... Try melting the mixture and pouring it into the mold. Is usually better. Also, use a silicone cone to form the burning chamber, it gives a more uniform flame front through the fuel (cylinder gets wider, meaning you start burning more fuel at once. Cone area stays more stable). AND DON'T LAUNCH MODEL ROCKETS IN THE CITY, YOU'RE GOING TO GET MODEL ROCKETS BANNED LIKE THAT!

11:50 that music tho... so fitting

As someone who has a decent amount of experience making solid rocket fuel, here are a couple tips. Firstly, use glucose powder instead of cane sugar. Glucose is a simpler molecule and thus has a cleaner burn, producing more thrust. Secondly, melt the fuel into a paste rather than pour powder into the tube. This does 2 things. Firstly it better mixes the fuel and oxidiser, and secondly it gets rid of any moisture that may be in the mix. Do not caramelise it however or you’ll end up with a dirtier burn. If done right you should get a mostly white looking paste with a brown tinge. Lastly add some red iron oxide to your fuel. It doesn’t need a lot, maybe half a gram per rocket.

That was an amazing aerospike engine, I would love to see more of them.

@daroniussubdeviant3869

3 жыл бұрын

very impressive exhaust plume geometry.

@q.e.d.9112

3 жыл бұрын

Yeah, me too.

@deltab9768

3 жыл бұрын

Yeah, the flow went exactly where it was supposed to. I was impressed. I think the failure may have been due to the solids in the exhaust stream blocking the "throat" (ring in the case of the spike?) and changing the constriction. I could easily be wrong though, I'm no rocket scientist...

@q.e.d.9112

3 жыл бұрын

@@deltab9768 My daughter in law is. She did her PhD on some esoteric aspect of rocketry, but she worked, initially on wind power turbine design and now she’s employed in fusion research. Formidably smart young woman and super mum. I don’t know how she does it.

Why am i only just finding this channel i could have been watching all of lockdown had i known!

"These are gonna blow up" rocket: how bout no

Man, your vids are the best!!!

Press f to pay respects to integsza he will be the man of the future

this guy sounds (and looks) like a mad scientist

Theme: It would be really cool if you explored the challenges of flying a helicopter on Mars, like the Ingenuity will be doing next year. You could use a vacuum chamber to simulate Mars's thin atmosphere and 3D print a whole bunch of helicopter parts. I think it's within the scope of stuff you do!

Theme: A vortex cooled rocket engine

Remember kids, safety... eventually.

I'm glad you kept the beard. It really is your trademark look.

This is the best KiwiCo advertising I've seen Integza. Well done!

I really appreciate seeing the various steps in engineering here. Many other videos talk about start, making, and end results, but you go through all the failures as well!

dear integza Theme: try with a liquid powered rocket with biodiesel Since a lot a people like rockets!

I love your sponsor segments. Always a laugh and i always watch the whole thing. Do you write them yourself?

The sentence “speaking of useless children, here’s today’s sponsor” is my favorite and I’m gonna use it all the time

@MrKrabs-fg8ui

3 жыл бұрын

Kill the child, boil him, mash him, stick him in a stew

Idea: use the acid from tomatoes to react with a base of some sort and make an tomato combustion engine. ❤️

11:54 ngl that is some beautiful architecture

Good luck Boy, very soon your channel gona be veeery big.

There's people who really knows how to make education content in a funny and awesome way. I learn more with you and Electro Boom than in the university here in Brazil 😂😂😂

Idea: "fixing the property damage caused by launching a rocket in the middle of the town with a 3d printer" lmao

this got me excited as a kid! thx !

Theme: build a kiln out of fire brick and your own electronic temperature control. You get to fire your ceramic parts and many other projects!

I personally wouldn't mind if we continue with the "take old inventions and find modern and/or extreme and humorous applications for it" theme, I really enjoyed it so far