Aerospace robots: scanning and milling parts at the C7 R&D Center

Ғылым және технология

KUKA industrial robots have joined the ranks of technological equipment in the C7 Development Center. A young design and research company, part of the S7 corporation, is engaged in the development of promising technologies and industrial products for one of the most high-tech industries - the aerospace industry. In the C7 development center, the workpieces made by robotic 3D printing go to the KUKA robot, which uses a laser scanner to check the geometry of the parts. The result of scanning and machining is a generated milling program, which is also executed by the KUKA industrial robot. The recognizable S7 corporate colors can now be found not only at the airport. Even the KUKA robots are wearing them!

Пікірлер: 21

  • @romana3308
    @romana33083 жыл бұрын

    muy interesante

  • @williamhuang5329
    @williamhuang53292 жыл бұрын

    Hanzhen harmonic drive gear , robot joint , strain wave gear, over 30 years experience

  • @bhavinnagda4167
    @bhavinnagda41672 жыл бұрын

    what is the reach of this robot , and model of this robot ?

  • @ajpt4336
    @ajpt43363 жыл бұрын

    The purpose of increasing the number of robotic arms axes is to obtain the highest flexibility in performance .Therefore ,KUKA robots are considered one of the most practical robots .

  • @tengilaurel3777

    @tengilaurel3777

    3 жыл бұрын

    Nope, fanuc and abb robots rule considering practicability.

  • @prasadthriving

    @prasadthriving

    3 жыл бұрын

    What is the Robot Model????

  • @ayushbhadouriya4773
    @ayushbhadouriya47733 жыл бұрын

    Heyy please add english captions to your videos

  • @fat031c
    @fat031c3 жыл бұрын

    "классический метало-режущий станок был бы в 10 раз дороже" Может имеет смысл спросить почему ?

  • @prasadthriving

    @prasadthriving

    3 жыл бұрын

    What is the Robot Model????

  • @harsh9558
    @harsh95583 жыл бұрын

    This is our robot.

  • @ParsMaker
    @ParsMaker3 жыл бұрын

    English please

  • @user-wp4et4jz8d
    @user-wp4et4jz8d3 жыл бұрын

    А вот бы робота сами сделали???

  • @MainDenHub
    @MainDenHub3 жыл бұрын

    🌜- Ты слышишь что-то? 🌛- Нет.. 🌜- А я слышу.

  • @franklarsen3695
    @franklarsen36953 жыл бұрын

    the coler is wrong

  • @265Spike
    @265Spike3 жыл бұрын

    смешно

  • @tengilaurel3777
    @tengilaurel37773 жыл бұрын

    Chinese engineering, conquering the world !

  • @julianreverse

    @julianreverse

    3 жыл бұрын

    🤦‍♂️🤦‍♂️🤦‍♂️

  • @drimextochkanet
    @drimextochkanet3 жыл бұрын

    Великая страна только в ИСКР

  • @drollery6399
    @drollery63993 жыл бұрын

    Почему немецкая компания предоставляет технологии двойного назначения, в страну-агрессор? Это они пишут и говорят(по типу ихтамнет, и зеленых человечков без опознавательных знаков) что ракеты делают для космоса. Сами разрабатывают военные технологии. Путька любит гибридные вещи. Смешать ужа и ежа, и ждать потомство. Тут тоже смешал авиационную компанию(гражданская), а заказы идут и от Шойгу(военная). Даже более того, 80% времени работают на вояк. И доказать невозможно. У них файлы и папки в компьютере с точки начинаются, и в файловом менедженере их невидно(ихтамнет) :-)

Келесі